The Loch Ard got its name from "Loch Ard" a loch that lies to the west of Aberfoyle, and the east of Loch Lomond. It means "high lake" in Scottish Gaelic. The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curle & Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrellas, perfumes, clay pipes, pianos, clocks, confectionery, linen, and candles, as well as a heavier load of railway irons, cement, lead, and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold their position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Lochard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy that had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost families in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce, and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Lochard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Lochard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Lochard Gorge. Cargo and artifacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register.The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artifacts from Loch Ard and its collection is significant for being one of the largest accumulation of artifacts from this notable Victorian shipwreck of which the subject items are a small part. The collection's objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history.Pressure gauge; round brass instrument with brass fittings: gate valve and handle. The two separate parts include a small bracket. Encrustations are on the surface. The flat side has been lacquered. Recovered from the wreck of the Loch Ard.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, pressure gauge, mechanical instrument

Single horse drawn dray (non-tipping) made of timber with metal fittings and wheel rims. Open all round with uprights spaced along the tray. Rail at the top of the uprights. Painted dark brown with unpainted tray boards.No inscriptions or markings.transport - goods; horse - drawn

Metal badge stamped - triangular brass base with a round lapel fitting on rear, painted blue, gold and white with the words "Australian Electric Traction Association". May have replaced an earlier version - see Reg Item 2184.trams, tramways, badges, aeta, membership

This artifact is a large brass bell. It was retrieved from the Schomberg wreck by local divers in the 1970s. Its location at the wreck site was described as "found on the west side towards the stern" the vessel remains lying on a north-south axis, with the bow pointing towards the shore as a result the bell was assessed from this position to have formed part of the cargo. The view that this was not a ship's bell belonging to the Schomberg is gained from two other 'Schomberg Bells' in the Flagstaff Hill collection, both of which have the vessel's name prominently etched into their outer surface. Additional indications indicate that this bell was not intended for maritime use due to the bell's rounded 'bell-curve' shape suggesting it was melodically tunable. Also the detailed basket-type fittings on the bell dome that would allow the bell to be suspended by ropes rather than just bolted to a yoke. The bell is currently on display at Flagstaff Hill, categorised as a church bell part of the Schomberg's cargo that was intended for use in a church within the Victorian colony. As the Colony of Victoria became more established, and its population expanded with the Gold Rush and other emigration from Britain, the demand for regular religious services and permanent church buildings also grew. We will never know if this bell was a specific order or part of an enterprising bell founder's consignment of general stock to a wholesale supplier in Melbourne. A cargo manifest for the Schomberg has unfortunately never been found. The shipwreck of the Schomberg is regarded as of significance to Victoria and is registered on the states Heritage list (S 612). The Schomberg wreck has great historical significance as a rare example of a mid 19th century large, fast clipper ship intended to transport cargo and passengers between England and Australia. The vessel that carried this bell represents the marine advances made in an attempt to break established sailing records between Europe and Australia. Flagstaff Hill holds a noteworthy collection of artefacts from the Schomberg shipwreck. The collection as a whole is primarily significant because of the relationship the objects have archaeologically, not only to highlight the story of the Schomberg ship and later it's wrecking but have an important potential to interpret the story and progression of maritime shipping in the 19th century. The church bell has a standard bell-curve shape and is dull bronze in colour. A large brass bell, plain and without visible maker marks, but with traditionally intricate basket-type cast fittings for suspension from a yoke by a number of ropes or chains. Approximately 3/8 of the bell’s outer surface bears a thin layer of marine growth and limestone accretion, and there is some minor pitting and spots of light verdigris over the remainder. The bell mouth, or lip, is slightly compressed-in in two places. It was retrieved from the wreck of the Schomberg. warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, brass bell, church bell

Set of 12 Victorian Railways prints of drawings of overhead arrangements at locations where trams and trains crossed in Melbourne. .1 - L6866 - wood break section insulator for tramway intersections, earthed section - has Merz McLellan stamp, originally prepared by the British Insulated and Helsby Cables - 1920. .2 - L5564 - Tramway intersection wood break section insulator - 5/49 .3 - L687 - Tramway and Railway Intersection fittings details - has reference to original 1920 drawings, Rev C 9/56. .4 - L6514 - Tramway and Railway Intersection Nicholson St North Fitzroy - 5/49 .5 - L652D - Tramway and Railway Intersection fittings details - has reference to original 1920 drawings, Rev D 8/48. .6 - L6656 - Tramway and Railway intersection fittings assembly - 6/56 .7 - L6511 - Tramway and railway intersection fittings assembly - for trams fitted with carbon skids - 4/55 .8 - L7025 - Tramway and railway intersection Glenhuntly Road GA - pencil drawings 6/59 .9 - L8106 - GA for tramway crossing Lygon St originally prepared by the British Insulated and Helsby Cables - 1920. .10 - L1749 -GA for tramway crossing Burke Road, originally prepared by the British Insulated and Helsby Cables - 1920. .11 - L1757 - blue print - fittings for tramway and railway contact wires at level crossings originally prepared by the British Insulated and Helsby Cables - 1920. .12 - L3506 - GA of tramway crossing St Georges Road. 6/30trams, tramways, railways, tramways, overhead, glenhuntly rd

Ledger page from account book of W. Vivian, saddler on reverse (plain) side, is a list of wires and phone messages paid by Mr. C. Smith, when W. Vivian died. List compiled by H. Vivian (son).Wirtes & phone Messages paid by Mr C Smith / When father died / J Jenkins Age a** 3/3 / Insurance on Stock 19/10 / Insurance on contents House & fittings 18/11 / Rates on land at Roseberry 1/6

Ford and McFarlane shearing handpiece c.1890. This shearing handpiece is from ‘Wellington Lodge” in Tailem Bend, South Australia. Wellington Lodge today is an Angus beef farm; however, the property has a long history which includes wool farming. Wellington Lodge has been in the McFarlane family since the 1840’s and was originally around 19000 acres. The donor, Brian Licence, assembled this handpiece out of spare parts he found while classing wool on the property in the 1960s. Brian showed the finished handpiece to the owners once his classing work was completed and was told he could keep the handpiece as a souvenir. Brian also classed wool at “Jockwar” and “Pleasant Park” in Penola for members of the McFarlane family during the 1960s. The handpiece is named after Ford, the name of the engineer who designed the handpiece and McFarlane, the owners of Wellington Lodge Station and employers of Ford. This handpiece was developed as a prototype for use on the property. The handpiece which is made of solid brass is in a “used condition” and has been patched with solder. The handpiece is stamped with the number 10. Internally, the handpiece is powered from a drive mechanism of compressed air, this compressed air was typically produced by burning mutton fat. The handpiece comes from the pre-electrical– steam engine era of shearing. Brass metal shearing handpiece. A three-pronged fitting to hold both the comb and the blade protrudes from one end. A cylindrical stem extends vertically from the other. This is likely where a connecting rod to the shearing plant would be found. Below this vertical stem, the handpiece has an additional threaded hose fitting. This is likely where compressed air was delivered into the handpiece. The inscriptions can be found on the rear, near the previously mentioned vertical stem. Around this stem is also where the repairs of solder can be found. These repairs are unique to this handpiece and are not common practise.Etched. Base of handle. “FORD & McFARLANE . SHEEP SHEARER . Etched. Base of handle. “10”sheep shearing, shearing equipment, ford & mcfarlane, wellington lodge, tailem bend, south australia, shearing handpiece, shearing

William Troughton attended the Ballarat School of Mines, and became its instructor in Turning and Fitting from 1935-1937.Photographic portraitwilliam troughton, bill troughton, ballarat school of mines, alumni, turning and fitting, fitting and turning

Part of the original fittings of the house when M's Dobson purchased the home. Matches a gas fire in the lounge room.Cream enamelled METTERS Gas Copper, complete with lid, burners, flue and drain cock. Consists of internal copper boiler . external enamelled surround and mounted on four legs.Light Here|Metter K.F.B. Pty Ltd Footscray. Gas Wash Boiler| N.T.I. 35000 B.Th. U/hr at 3' W.G|Capacity 12 Gallons| Serial Number No. 85domestic items, laundering

A decorative kerosene lamp representing the type of light fitting in use during the late 19th and early 20th centuries.This glass lamp shade replicates the design of late 19th and early 20th-century decorative glass used on kerosene lamps in a domestic situation.Lamp shade; blue glass lamp shade with bulbous middleflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kerosene lamp, replacement glass, glass lamp shade, lamp fitting, light fitting, lamp shade, glass lamp fitting, blue glass

Rudder from the tug boat YORK SYME, built in 1961 by ADELAIDE SHIP CONSTRUCTION INTERNATIONAL - PORT ADELAIDE, AUSTRALIA. It is sailing under the flag of the Cook Islands. Its gross tonnage is 149 tons. The rudder is believed to come from a lifeboat previously attached to the Tug. The tug York Syme operated in various ports in New Zealand until around 2011. It is believed this is when it went to the Cook Islands. The registered owner is unknown at this time.The rudder is from the 1961 Tug York Syme. Its size suggests it was from the tug's lifeboat or ancillary boat. It is an example of marine technology from the mid-20th century. Although small, it works on similar principles to 19th-century rudders from the large sailing ships. A comparison of size and construction can be made between the various rudders from different eras in our collection.Rudder; small blonde wooden rudder from a small boat. It has two brass fittings. A thin spliced rope has been passed through a hole near the rudder's neck. A stamped inscription is located just below the rope.Stamped in black; "YORK SYME"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, marine equipment, steering, navigation, rudder, adelaide ship construction international, tug boat, york syme, cook islands, marine technology, ship fitting

"S.S.Karitane" Steel single screw steamship, wrecked 24/12/1920 at Deal Island Lighthouse 2 x porcelain egg cups with Union S.S. flag 1 x Brass gas fitting 1 x Butter Knife

Until Linton was connected to the statewide electricity grid in 1939, this gas light was used to light the altar at the Presbyterian Church in Linton.Curved gas light wall bracket, ornamented with leaves. One end designed to be attached to a wall, the other end has a valve, presumably to control the flow of gas. Beyond this valve, the end of the fitting is threaded, to facilitate attachment of a glass cover.gas lighting, presbyterian church linton

black and white photo - copy. Workshop in corrugated iron walls, 4 adult males standing amongst machinery. At bottom of image printed ' view showing fitting shop at crushing machine' New Moom Mine ? ( J. Lerk 26.11.1999 ).W.H. Robinson ?organization, business, new moon mine ?

Thomas Edward Williams was a native of Glamorganshire, South Wales, and came to Victoria in 1857, in the sailing ship Morning Light. He came to live in Bendigo in 1872. Mr Williams lived at 67 Vine Street, Bendigo. His obituary in the Bendigo Advertiser states that he was "the originator of the floral displays in the Easter Fair processions". The medal is possibly in recognition of his services for the Easter Fair.Heart shaped medal on a brown plaited leather strap with metal clasp fittings. Embossed within a border around the edge "Bendigo Easter Fair 1902". The centre of the medal is decorated with scotch thistles. Obituary from the Bendigo Advertiser, 1914.Engraved on reverse of medal "Thomas Edward Williams"easter fair 1902, floral display, medal

Set of three photographs of Geelong single trams, one of the same type of tram (No. 7) prior to fitting with marker lights and No. 4 after fitting with marker lights, one during daylight and one at night. Three photographs taken by W.C. Meyer, Photographer, 333 Myers St. East Geelong, Phone 3289. Photo of one end of the tram only. Note top marker lights, not repeated on any other cars shown in photographs in Destination Eaglehawk. Shows as well, arrangements for tow bars, mirror and handrails. 1872.1 - Before fitting with additional lights, at night with 'flash' - showing destination 'West' - tram No. 7 1872.2 - after fitting with lights and stripes, during daylight - showing destination 'CITY' - tram No. 4 1872.3 - ditto at night, showing destination of 'CITY'. - tram No. 4 1872i4 - close up of the mirror and light on the roof - right hand side of i2. Note all lights illuminated in the night photo. Destination Eaglehawk, page 44, notes tram 4 as being fitted with dash canopy lighting and zebra stripes in 1955. No mention of No. 7 being so fitted. For date of photograph, assumed early 1955 at this time (14/11/2001) See Destination EaglehawkAll stamped with black ink stamp " W.C. Meyer, Photographer, 333 Myers St. East Geelong, Phone 3289" and on rear of photos in dark blue ink, handwriting, 1872.1 - Night - with 'flash' photo. 1872.2 - Daylight 1872.3 - Night - with 'flash' photo. This tram has supplementary lights trams, tramways, geelong, dash canopy lights, lights, mirrors, tram 7, tram 4

Staged photograph to demonstrate the lifting of a bicycle onto a W class tram and Z class tram and the difficulty of fitting it on board.Yields information about social inclusion Set of four black and white photographs with surnames of two, three and four males featured written in inkHandwriting illegibletrams, publicity, bicycle on tram, social inclusion

Photograph of MMTB No. 137, at Tramway centre or Sturt St with Town Hall in the background, 22-3-1947. Tram un-numbered at the time of the photograph, later No. 34. Note the folding gates on the tram. See image i2 for rear of photograph. Yields information about the early use of Ballarat's bogie trams and Sturt St.Digital image from the Wal Jack Ballarat Album.On rear in ink "SEC Ballarat Tramways Ex M&MTB 137 now 34 Ballarat fitting with folding gates Sturt St, Ballarat 22-3-47" Wal Jack stamp in top right hand corner with number "T108" written in.trams, tramways, sturt st, town hall, bogie trams, tram 137, tram 34

Typical of an altimeter fitted to an aircraftBlack metal cylindrical body with glass face and clock arms. Face is numbered 1 to 0 (100 to 1000 ft) also 1000 ft and 10,000 ft scale. Preset knob and preset widow and readout. Pressure tube fitting on backAltitude 100, 1000, 10,000 ft Kollsman Instrument Division. Elmhurst New York

A tank crew gas mask as issued by the United States of America army during World War 2. When correctly worn by the wearer there is a tube fitting at the rear of the head which was connected to a length of flexible hose to receive a fresh air supply.