Belonged to donor's family tailoring business..1 Large electric iron with wooden handle. Used in tailoring business. .2 spannerManufactured by 'Newglo' Registered.|47 Latrobe Street Melbourne.|Volts 230 Amps 4.1 No 1037domestic items, irons, trades, tailoring

Knife, Clasp, with Marline Spike and Tin Opener, manufactured in England to the Standard Pattern 6353/1905, as modified in 1913 with specific dimensions to the tin opener. This pattern was used by British forces, and was one of the patterns issued to members of the Australian Infantry Force during WW1. This pattern was used up until the late 1930s, where it was superseded by other patterns.Knife, Clasp, with Marlin Spike and Tin Opener, manufactured to the standard British pattern 6353/1905, as modified in 1913 with changed dimensions for the tin opener. The hilt of the knife has two chequered pattern sides secured by five metal rivets. The underside of the hilt has two recesses to allow storage of the blade and the tin opener. A tapered steel Marline spike is mounted on the other side of the hilt, pivoting at the opposite end to the blade and tin opener. A copper wire shackle is also secured at this end of the hilt that was used to attach the knife to a lanyard or belt clip. A fingernail indentation is located near the top of one side of the blade. The tin opener has bevelled edges tapered to a point on one side, with a steel post mounted in the middle of the other side.J. CLARKE & SON SHEFFIELDknife, clasp, ww1, steel, marline spike, australian infantry force, milirary

This glass ginger beer bottle was manufactured and used early to late 1900's, until the time that cheaper containers were invented(plastic bottles). This bottle was so constructed to be easily moved within the ginger beer processing plants from the brewing vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1990s the bottle slowly became phased out of production however boutique suppliers still preferred thick glass to contain any explosive action. Two major glass bottle works companies, e.g. Australian Glass Manufacturers and the Melbourne Glass Bottle Works Co. were the main suppliers for the Victorian State.In the period when this bottle was manufactured and used the major ginger beer brewing plants for the whole of Victoria were located in Melbourne because this was where its greatest consumer base was there and most rural areas were supplied by domestic sources (mother brewing ginger beer for the children). The Kiewa Valley and its region was one rural area which until road invrastructure was enhance covered the ginger beer thirst by local family production. As the population expanded considerably in the late 1940's (SECV Hydro Scheme) with a greater demand for "soft" drinks" being established supplies from larger towns and cities were call for. Each bottle was "branded" during manufacturing to show the contents were from a reputable supplier (PHIBBS Bros) and where it originated from. These bottles were recycled by the manufacturer as a way to cut production costs. This method of recycling the bottles back to the specific manufacturer has (except for South Australia)been overtaken by a no cost recycling collection by councils (funded by their communities). This method by passes the user cost principle as the bottles are processed as non generic. The uneconomical "on cost" which was replaced by the "throw away" less costly plastic containers however did not provide the keen domestic brewer of the "beer" with a reusable bottle.This heavy gauged glass bottle (Ginger Beer) has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the production line. The method of pouring ginger beer into the bottle has been part of the "production line" process of automation. This bottle has a capacity to hold 250ml of ginger beer and is made from "clear" glass. The marority of ginger beer bottles produced in this time frame where made with a "green" tint in them.This tinting helped reduce the sunlight effecting the contentsAround the bottom side of the bottle and blown into the glass is "THIS BOTTLE IS THE PROPERTY OF PHIBBS BROS, ALBURY" above this, in "running script" and sloping up from left to right is "Phibbs Bros" and underneath parallel to it "ALBURY". On the base of the bottle is molded a big "L 289" underneath this "M" and below this "AGM".ginger beer bottle, soft drink bottles, cordial bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons) and produced. In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co. Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them.Around the bottom side of the bottle and blown into the glass "ONE PINT" and on the opposite side "MILK". Below these markings is "This BOTTLE BELONGS TO MILK BOTTLES RECOVERY LTD" below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION. On the base of the bottle is molded a big "M". An identification mark of "90" over "9" is beneath the "M". glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles, milk, dairy, farms, kiewa valley

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons) and produced. In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co. Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" This particular one has "7/14".This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one Imperial pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them. Around the bottom side of the bottle and blown into the glass "ONE IMPERIAL PINT". Below these markings and stenciled is "KIEWA" (in freehand style and underlined) underneath is "PASTEURISED FULL CREAM MILK" underneath this ,in freehand stiyle is "USE" next to this in block style "KIEWA BUTTER, CREAM, AND ICE CREAM MIX" to the left of this ,and barely readable is stenciled "THIS BOTTLE ALWAYS REMAINS/ THE PROPERTY OF/ NORTH EASTERN DAIRY Co. Ltd". On the base of the bottle is molded a big "2". with a smaller "m". An identification mark of "7" over "14" is within a circled boundary. Below this is moulded "RM - 15". glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

Gramophone cylinders, black, 6 grooves on interior stored in cardboard round container with detachable lid. The Clarion Record, made and sold by The Premier Manufacturing Comp. Ltd. London. 126 Southern Melodies.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, gramophone cylinders, the clarion record, the premier manufacturing comp. ltd

General issue Infantry Officers Sword 1897 Pattern, George V cypher on basket, manufactured by WW Greener, Birmingham, once used on the battlefield by officers, during conflicts up to and inclusive of WW1.

The tin was owned by Jack Grinton No 1043, 38th Batt AIF. This tin held hundreds of his nitrate negative photos for many years that he took during the Great War which remained virtually intact as away from light and air until rediscovered early 21st century. This collection became part of the exhibition “A Camera on the Somme”which was 80 selected photos to make a story with 7 story boards with photos to compliment. A book was also produced to accompany the travelling exhibition. The framed collection are Cat No’s 7100P to 7179P and 7180 to 7187. Part of the Grinton collection.Refer Cat No 1280 for Jacks service details. Refer 1317P, 1320P.Biscuit tin, rectangular with coloured floral arrangement on front. Used by jack Grinton to hold nitrate negative photos taken during WWI. Original biscuit manufacturing label on front in one corner.containers-commercial, domestic items-containers, food storage, metalcraft

Toasting fork, brass. Casting of cat handle and pierced tines, 3 tines. The body of the fork has been indented along its length in seveal places, appears to be post manufacture decoration.Body of fork has several indentationsfork, toasting, brass

Two cards from the Royal Melbourne show, one dated 1932. Advertising Reed Bros. Manufactures of pure fruit drinks, aerated waters, cordials and cordial extracts. Bridge Street, Bendigo.bendigo, business, reed bros.

Collected by donor's father Norm Robinson during his 40 year employment with Malcolm Moore between 1948 and 1988.Photos of worksites, machinery, manufactured equipment for Malcolm Moore's. Selection taken from photo album now returned to donor. Moore's premises were in Williamstown Road (approximately where Bunnings is now)industry, built environment - industrial, norm robinson, malcolm moore pty ltd

Box of "Eclair Photographic Papers" Manufactured under licence by Crosby Sensitizing Pty. Ltd., branches in all states Reprographics across the nation Contains unused photographic paper - 6.5"x 4.75"Éclair photographic papers Australian Licensee: Crosby Sensitizing Pty. Ltd.

McColl Rankin & Stanistreet, Australian Paper Manufacturers LTD Annual Report 1950. Published by Australian Paper Manufactures LTD. Photographs & graphs. Markings: Some facts from this would be helpful, RS.organization, business, local bendigo, mccoll rankin & stanistreet, australian paper manufacturers ltd annual report 1950

"Potassium permanganate is an inorganic chemical compound with the chemical formula KMnO4. It is a salt consisting of K+ and MnO−4 ions. Formerly known as permanganate of potash or Condy's crystals, it is a strong oxidizing agent. It dissolves in water to give intensely pink or purple solutions, the evaporation of which leaves prismatic purplish-black glistening crystals. (Which is what in contained in the bottle.) As an oxidant, potassium permanganate can act as an antiseptic. For example, dilute solutions are used to treat canker sores (ulcers), disinfectant for the hands and treatment for mild pompholyx, dermatitis, and fungal infections of the hands or feet. Potassium permanganate is used extensively in the water treatment industry. Historically it was used to disinfect drinking water. (From Wikipedia)" Eight sided, rectangular, clear glass bottle containing grey filings. It is closed with a cork, which is probably broken off. Label indicates Potassium Permanagate manufactured by Felton, Grimwade & Duerdins Ltd. "POTASSI PERMANGANATE."/"POISON"/"Felton Grimwade & Duerdins Ltd." on label on front. There are numbers in the glass on the bottom: "1608 M" and small difficult to read letters. deaf children australia,, chemical, antiseptic, potassium permanganate, water purifier, felton grimwade & duerdins ltd, bottle

This President's chair was presented to the Victorian and Tasmanian Conference in 1932 by Mr Fred J Cato. Dark hardwood ornately carved high backed chair with two arm rests. The chair includes two worn leather cushions on the bottom and the back. There is a small metal plaque at the back with the manufacture's details.

One of a series of photographs and documents donated by Jean Woollard relating to her father, Wilfred Charles Woollard, (and to herself). Wilfred Charles Woollard (1892-1971) was the grandson of William Woollard (1834-1923) and Charlotte Woollard, nee Lott (1828-1902), early settlers in Kew. Wilfred's father and mother were Walter Herbert Woollard (1856-19) and Rosa Anna Woollard, nee Morgan, (1859-1936). Wilfred Woollard's siblings were Walter James Woollard (1882- ), and Arthur Reginald Woollard (1888-1973).Black and white photographic positive of Wilfred Charles Woollard, sitting at a desk taking a phone call. Wilfred Woollard was trained as a draftsman and engineer and at one stage worked for the Australian Glass Manufacturing Company. woollard family, jean woollard, wilfred charles woollard

Manufactured coin dispenser for 1, 2, 5, 10, 20 and 50 cent coins, made from black, white plastic with metal springs under each white coin support plate. Held in position by three metal screws. Manufactured by BIPA Australia. Fitted with two openings at the rear so a leather or belt strap could be passed through. There are a number of 1, 2, 5, 10, 20, 3d, half penny and penny coins in the unit - for display purposes only, not collected.trams, tramways, fares, cash handling, tickets

This grain scale tester was used to work out the percentage weight of a sack of grain after the grain husk, dust and dirt were removed, thereby allowing for the calculation of the true value of the sack. The parts were attached to the box via the screw on top of the box and the cleaned grain went into the funnel to measure a fixed grain amount, before being released from the bottom of the funnel into the barrel which was then hung on the end of the scale. The weight was then slid down the graduated ruler until the scale balanced. Grain scale testers would have been used in farming in the Western District in the past and similar objects may still be in use. This grain scale tester is retained as a good example of an agricultural item from the past.This is a grain tester scale in a wooden box. .1 The wooden box has two metal hinges and wooden inserts inside with blue felt on the tops of the inserts. The box has a metal plaque on the lid and a round metal hole section for inserting a piece of equipment. .2 This is a metal flask on a stand. Part of it is rusty. .3 This is small metal cylinder with a lid. .4 This is a metal bar with measurements, a hook at the top and a slide or weight fitting on to the bar. .5 This is a small metal screw. ‘Lbs per bushel’ ‘Australian Manufacture by Australasian Scale Co. Ltd., Thomas Street, Sydney N.S.W.’ agricultural instruments, history of warrnambool, grain scale tester

Steel Helmet, Model "M1916"ET6 (small indented stamp inside near rim). Indicates manufactured by Eisenhuth Werke Thale (spelling?)

The purpose and contents of the case are unknown. However, the word "Kwairobai" has been used in a group of words listed as solid fuels - coal, coke, fire wood, charcoal and spunk and ‘Kwairobai’ - in a 1939 book 'Consular Reports Issue 31' in reference to the publication of Japanese Trade-marks. This particular Trade-mark, No. 53, is a "cross in a triangle". the maker was To. Jinjudo of Osaka, Japan. This case belonged to Dr William Roy Angus and is now part of Flagstaff Hill’s comprehensive W.R. Angus Collection, donated by the family of Dr W R Angus, 1901-1970, surgeon and oculist. The W.R. Angus Collection: - The W.R. Angus Collection includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. It includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. During World War II He served as a Military Doctor in the Australian Defence Force. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Both Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This case is an example of objects belonging to Dr. W. R. Angus, 1901-1970, surgeon and oculist. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The Collection includes historical medical objects that date back to the late 1800s.Case, a rectangular brass case neatly covered in brown velvet fabric with a paper label attached. It has a long sliding cover with three rows of cutout stars with a red background, and a decorative brass thumb grip at one end that has three Japanese characters on it. Inside are three cylindrical rolls of white fabric with unknown contents. The label has English and Japanese text, and a logo with three Japanese characters. It was made by To. Jimjudo in Osaka Japan. This object is part of the W. R. Angus Collection.On the label and thumb grip; [unknown] Japanese characters On the label; “KWAIROBAI / KIMIGASODE / MANUFACTURED BY TO. JINJUDO / OSAKA JAPAN”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, flagstaff hill maritime museum and village, dr w r angus, dr ryan, w.r. angus collection, metal case, velvet covered case, kwairobai, kimigasode, to. jinjudo, osaka jap

Established in 1906, Frank Moore soon became well known amongst discerning tradespeople for the quality & accuracy of his tools. The Company was acquired by John Shaw & Son in 1945 & James Neill & Co in 1970. Currently part of the Bower Meteorology UK Group, they still produce superb tools & measuring instruments in Sheffield. The subject item is made from high-grade carbon silver tool steel with the patented 'Firm Lock' joint, that identifies the maker as Moore & Wright.A tool used for external measurement of items made by a maker who patented the "firm lock" jointing system now used on many different types of tools in many different industries. These items are now collectible and quite rare as a result are sought by tool collectors in the USA and UK.‘Firm Joint’ external measuring calipers believed made by Moore & Wright. Impressed into the metal "L A J S" (Probably the owner and company that used the item nothing to do with manufacturing) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, calipers, callipers, external calipers, outer caliper, pottery tools, masonry tools, glass making tools, external measurement

Metal lid with the Writing Raspberry on it Faded label hard to read text on the label far away.Raspberry, Preservative added - (lid) Glovers Lemonade Raspberry Manufactured by Glovers & Son, Chapet St, Bendigo

Lavers Hill Cheese Factory operated from 1906 until about August 1913. It consisted of a factory and a residence, with the managers B. Philbrick, D. McRae and D. McDonald. The ledger, covering the period 1910 until 1913 when the factory closed, deals with cheese sales, local sales, milk purchases and journal entries for this period, as well as wages, cartage and other operating expenditure. The Lavers Hill Cheese Factory closed when it became more advantageous to send their cream into Colac. Ledger. Lavers Hill Cheese Factory, 1910-1913.Loose leaf: Lavers Hill Cheese Factory; Purchases Butterfat, 1910-11; contents; Manufacturing A/c.lavers hill; cheese; factory; butter;