Hand operated wringer; timber frame with metal fittings; timber handle; 2 top screws; scattered nail holesCentre: FALCON / LOOSEN TOP SCREWS / WHEN NOT IN USE / IMPROVED PAT'D . . . Sides: EXTRA / HIGH GRADE / WARRANTED / TRADE / MARK . . . Flap: HORSE SHOE BRAND / CLOTHES WRINGER / WARRANTED 3 YEARS FOR FAMILY USE Underside of Flap: THIS WRINGER HAS WARRANTED RUBBER / ROLLS / VULCANIZED TO THE SHAFTS / PUT A LITTLE OIL OR LARD ON THE BEARINGS / BEFORE USING AND LOOSEN TOP SCREWS / WHEN THE WRINGER IS NOT IN USEwringer, mangle, laundry

Port of Portland Authority archivesFront: (no inscriptions) Back: Priestman/ on Timber Barge (black pen on white label, centre)port of portland archives, dredging, priestman stippert, barge

Cocks Pioneer old mine timbers. Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25 000. Settling dams were built, one of which held 1,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. mining, gold, tin, open cut, gold mining, tin mining, cocks pioneer, el dorado, eldorado

Williamstown formed as a Municipal Government in 1856 and applied to the Victorian Government for a set of standard weights that would ensure all businesses etc would weigh their goods correctly. They arrived in Williamstown and were used from 1860 until 1966 when decimalisation was established in Australia. TThese weights were the first of their kind to be acquired in Victoria.15 round brass Imperial standard weights in 3 timber cases, weights weighing 1/2oz to 56lbs. Numbers 1 to 11 with rounded knobs and largest 4 (12 to 15) with rounded handles. 12 smallest in timber case, next 2 weights in timber case & largest in timber case.13 have Potter London engraved, also stamped are various verification dates. weights, brass, imperial

By 1910 revenue from the Beech Forest railway was $15,500, working expenditure $12,000, with a net loss (including interest charges) of about $4,000. This and the following year were the lowest net losses ever experienced. Passenger journeys rose steadily, outwards goods traffic rose to a record 12,959 tons (in 1911), and inwards goods traffic was a record 3,359 tons.. The railway station possessed a goods shed, stock race and yards, engine shed, coal stage, crew cabins, a refreshment room, and a four-roomed station building, with the station staff to match. Beech Forest was the principal despatch centre at this stage for split timber. Bill Devitt laid a timber tramway to the Beech Forest railway station to cart the palings for on-shipment..B/W. 177mm x 271mm. A general view from the eastern end of Beech Forest station in 1910. Note the Goods Shed, three tracks with No.3 Road having a NU louvre van and loaded NQR wagons, timber stacks to the left, and Devitt's Tramway with unloaded trolleys at the lower left. To the right, crew cabins with shops and houses in the background.beech forest; railways; timber; tramway;

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A piece of wood broken from the timbers of the shipwrecked SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact is a light grey colour with plain long grain and bears a reddish stain on parts. Part of a drilled hole is red stained with traces of corroded metal still evident. The piece appears to have split off from other fragments that are in the Flagstaff Hill collection (6257, 6258) and it is in fragile condition.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

The barrel was used in the Wodonga Court House as part of the selection process for jurors. It was a standard issue barrel used throughout Victoria. It was retrieved from the ruins of the court house which was destroyed by fire. It was then donated to the Wodonga Historical Society. The timber display stand was made and donated by Jake Tooley, a Wodonga Historical Society member, The Court House was situated in the Customs Store building alongside the Wodonga Police Station in 93 High Street. (The house where the Police Station was had originally been the home of the Customs Officer). In early 1964, the court house building was burnt beyond repair and furniture and other property destroyed. The cause of the fire was never found. The Police Station was lucky to survive but only because of the efforts of the local Fire Brigade. After the fire, the court was held first at the old Fire Station premises near where the Wodonga Post Office is near Woodland Grove, then it moved to a vacant building in Mitchell Street which was later turned into a Child Care Centre. Foundations for the new court house in Elgin Street were laid in October 1965 Local significance due to its use in the Wodonga Court House and its survival of a major fire. State significance as it documents a procedure used in the Victorian Court and Legal system Cylindrical metal-iron barrel painted black with writing stenciled on the front in white The timber mount was made for storage and display is not part of the original object,Inscription on Barrel "WODONGA./ Jurors in use./ Special"wodonga court, jurors, selection, legal system, fire

Colour photograph of the historic Suggan Buggan school showing timber table and benches with slatted timber walls. Suggan Buggan Victoriahistoric buildings, schools

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A small piece of wood broken from the timbers of the shipwrecked clipper SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact bears a reddish stain on exposed parts but the main surface is grey coloured. It appears to have been split off other wood fragments in the Flagstaff Hill collection (6257, 6259). It presents as a lighter less dense wood than oak, but may have lost mass through submersion.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

From 1945 a sawmill, the Calco Mill, was formed to cart sawn timber initially from the Zappelli's property on Denherts Track. The plant was later shifted to Pul's property and, in 1951, finally moved to a new mill in the Beech Forest railway yard. Potato output also rose, around 280 hectares and was shipped exclusively by rail until 1955. The railway was very busy, in fact so busy that potato farmers and especially saw millers started agitating for road transport.G41 locomotive, four NQR loaded wagons, and a louvred van near the Goods Shed. Next line, three loaded and three empty NQR wagons. In the foreground near the station building, a louvred van. A water tank and timber mill in the background. B/Wbeech forest; railways; loco g41;

This large wooden sign was originally attached to the barge D28. The D indicated that it was the fourth barge to be built in 1928. The number represented the year it was built.Large red gum timber signD 28

Copper coil in a stand made of timbercoil, scientific instrument

Copy of Surveyor's Street Plan of Melbourne 1837. Donated by Patsy Coverdale and accompanied by brief details of her family connection to the map. Copies of plan available for sale from Greensborough Historical Society.Map of early Melbourne with connections to a current resident.Copy of plan, mounted on timber and framed.melbourne street plan, coverdaye, umpleby

Photograph of "indoor" staff, Shire of Diamond Valley, on their last day at work for the Shire.The Shire of Diamond Valley was a Local Government Area located about 20 kilometres northeast of Melbourne. The shire covered an area of 74.38 square kilometres and existed from 30/09/1964 until 14/12/1994.Large colour photograph in timber frame.shire of diamond valley

Greensborough Historical Society member Marilyn Smith created and donated a leadlight display with the letters GHS prominent in the design.Glass and lead window in timber frame.The letters "GHS" created in glass leadlight.greensborough historical society, marilyn smith, leadlight

Oldstead Farmhouse, painted by Greensborough artist, the late Doug Hall. Oldstead Farm was in the area around the present Oldstead Road Greensborough.Oil painting of a house, in timber frame.On back of painting "Oldstead Farm, Doug Hall"doug hall, oldstead farm, oldstead road greensborough

Len Barnard's 'Soap Saver' WashboardLen Barnard is a major contributor to Australian JazzMetal and timber 'Soap Saver' WashboardNational Washboard Co. Chicago Saginaw Memphis Soap Saver Trademark reg. U.S. Pat.Off. Made in U.S.A. No 198 Patent 1152766-1283148soap saver washboard, washboard, len barnard, soap saver washboard, washboard, len barnard

The Gurley enterprise was established in 1845, first as the partnership of Phelps & Gurley and in 1852 as W. & L. E. Gurley. William Gurley and his younger brother Lewis E. were both engineering alumni of Rensselaer Polytechnic Institute, in Troy, NY, and brought to the business a hunger for technical innovation and unrivaled marketing skill. Exposure at the Centennial Exposition in 1876 launched the company into international prominence from which it never fell. The brothers built a factory in 1852 that operated in departments, each department turning out different components, which were then assembled. This revolutionized the industry which, to that time, operated as small shops making, essentially, individual instruments. Gurley was able to roughly halve the price of their instruments over those of their competition, while maintaining quality. (https://www.gurley.com/history)A timber box of 30 lantern Slides.astronomy, lantern slides, gunn's, w. & l.e. gurley

Darning 'mushrooms' were used to repair any woollen garment, such as socks, jumpers and ladies cotton or Lyle stockings. This darning tool was an essential item in pioneer household as the early settlers had to make and repair all their clothing.A timber 'mushroom' shaped darning tool sewing, dressmaking, craftwork, early settlers, pioneers, moorabbin, brighton

Black and white photograph in timber frame.There is a list of staff on the back of the photograph.collingwood technical school, staff, nmit,

Paul joined the R.S.L in 1948 and received his 50 year Service Award in 1998. Paul joined the British Army in Melbourne in 1944 and was posted to the Black Watch Regt. He served in the UK until 1946. He was commissioned into the Duke of Wellingtons Regt and served in Palestine with the 1st British Infantry Division until 1948. Paul was discharge at Royal Park in Melbourne in 1948. He was awarded Life Membership in 2001.Timber framed photograph of male in suit.PAUL KIRBY1991-2000paul kirby, palestine, life membership

MARSH VX132480 was born on 8/1/1915 at Bendigo and joined the Army May 1941, served with Survey Battery Unit at Buna and Finschaven New Guinea. Joined Wangaratta Sub-Branch 1946. Delegate to the 34th Dist. Board and delegate to State Conference on several occasions. Received Life membership in May 1970.Timber framed photograph of Sydney MARSHJOHN S. (Syd) MARSH john s. (syd) marsh, new guinea, wangaratta rsl, ww2, australian army

Jack Fogarty was made a Life Member of the R.S.L in 1957. He joined the league in 1920 and was one of the original members when the Wangaratta Sub-Branch affiliated with Anzac House in 1929. He was elected to the committee in 1940, was Senior Vice Present in 1949 and President in 1957-8. Jack was also the Foundation President of the R.S.L. Club. He was chairman of the 34th District Board in 1956-57 and was a delegate for many years.Timber framed photograph of male in suit.JACK FOGARTY jack fogarty, life member wangaratta rsl

Image of Frederick James "Jack" McIntosh VX34544 who served with the 2/24th Infantry Battalion during the Second World War He was born on the 9th May 1905 at Beechworth. He joined the Wangaratta RSL Sub Branch in 1946. He was Vice President for 15 years and in 1963 attained Life Membership of the RSL McINTOSH joined the Wangaratta RSL Sub Branch in 1946. He was Vice President for 15 years. As Chairman of the Building Committee he was mainly responsible for many improvements to the clubrooms. In 1963 he was presented with his Life Membership Badge by Sir Charlies McKay, then President of the Victorian Branch.Timber framed photograph of male in suit.JACK McINTOSH enlisted in the 2/24th Inf. Battalion in 1943. Joined Wangaratta Sub-Branch in 1946. Jack was given his life membership in 1963 .2/24th battalion, jack mcintosh, life member, wangaratta rsl, ww2

Joined the army in 1915,joined the RSL in 1916 and joined Wangaratta Sub-Branch in 1933, President from 1937-38 and asst Secretary from 1935-1936Timber framed black and white photographFRANK H. McDONAGHmcdonagh, frank h. mcdonagh, wwi, wwii