Maple Street Primary School Grade and staff photos Maple Street Primary School, Golden Square 1992, colour photos: a) staff photo, no names; b) Prep H, Teacher Anne Hocking; c) Grade 5F Teacher Chris Fithall; d) Grade 3E Teacher R. Elliott; e) Prep 1F Teacher Helen Farrow; f) Grade 3W Teacher George Wood, Wayne Matthews; g) Grade 5S Teacher Brenda Savy; h) Grade 1R Teacher Maylene Rodda; i) Grade 4W Teacher Ross Wood; k) Grade 1/2D Teacher Sharon Derby; L) Grade 2H Teacher Anne Hartney; m) Grade 4/5H ; n) Grade 6W Teacher John Williams; o) Grade 6G Teacher Frank Gargiulo. Students names are written on bottom of photos.bendigo, education, maple street primary school

List of the Seating for Supper, includes Official Party, Debutantes and their Partners, and Other Guests. Official Party consisted of: Sir George Lansell, Lt General Wells & Mrs Wells, Col J W Swatton & Mrs Swatton, Cr. Oliver & Mrs Oliver, Mr F E Jackson & Mrs Jackson, Mr R C Wright & Mrs Wright, Ladies Auxiliary, Mr A V Palmer and J. Barton. Other Guests: Miss Liddell, Col. J Lockwood & Mrs Lockwood, Col P Seymour & Mrs Seymour, Major P Kennedy & Mrs Kennedy, Ladies Carpet Bowls, War Widows Guild, S. S. & A. Mothers, Eaglehawk Sub-branch, Parma Dance Club, Harcourt Sub-branch, Mr B Wood & Mrs Wood, Mr Tout & Mrs Tout, Mrs Keck, Captain Poole,event, social, victory ball, r.s.l. bendigo collection - rsl victory ball 1951 seating for supper, sir george lansell, lt general wells & mrs wells, col j w swatton & mrs swatton, cr oliver & mrs oliver, mr f e jackson & mrs jackson, mr r c wright & mrs wright, ladies auxiliary, mr a v palmer, j barton, miss liddell, col j lockwood & mrs lockwood, col p seymour & mrs seymour, major p kennedy & mrs kennedy, ladies carpet bowls, war widows guyild, s s & a mothers, eaglehawk sub-branch, parma dance club, harcourt sub-branch, mr b wood & mrs wood, mr tout & mars tout, mrs keck, captain poole

A Wright & Ditson 'Contender' model tennis racquet, endorsed by George Lott. String whipping around shoulders and around base of throat. Parts of throat and shoulders painted burgundy. Racquet model name and endorser name printed across throat on obverse. Endorser image printed on shaft on obverse. On reverse, manufacturer name and image of endorser are printed across throat, and signature of endorser adhered as decal on shaft. On left side of shaft are manufacturer's name and country of manufacture. Octagonal, fine-grooved handle, with leather end wrap. Owner name: 'WOODS' inscribed on shaft on obverse and reverse, and adhered using decals on left side of shaft. Two further decals adhered onto left side of shaft including one red with white cross, and one white with black spot. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, Paint, Stringtennis

Photographs taken on Graduation Day 1979. (1) Frank Keenan (Staff). (2) Margaret Egerton, Nicholas Bailey, Laurie Metzeling (Staff). (3) Brian Pell (Principal), Frank Keenan. (4)Frank Keenan. (5) Barry Dimelow. (6) Frank keenan, Brian Pell, Barry Dimelow. (7) Barry Dimelow. (8) Brian Pell, Frank Keenan. (9) Frank Keenan, Barry Dimelow. (10) Unidentified. (11) Frank Keenan, Brian Pell. (12) Frank Keenan, Brian Pell. (13) Brian Pell, Peter Wood, Graeme Pitt (student), Robert Taylor. Photograph by Information Branch Victorian Dept of Agriculture Ref. No. 1978(648-39). (14) Ref. No. 1978(648-39). (15) Peter Wood, Graeme Pitt (student), Ref. No. 19789648-38). (16) SRC Rep?, ? Frank Keenan.graduation day, 1979, frank keenan, staff, margaret egerton, nicholas bailey, laurie metzeling, brian pell, principal, barry dimelow, peter wood, graeme pitt, students, src, robert taylor

Set of five components from Melbourne Cable tram saloon or trailer No. 427, from the inside or internal framing panels around a door. Made from soft wood, cut and assembled with wood screws, glued and then varnished. .1 - Small arch part or panel over the doorway with the cable tram number painted on to it "427". .2 - part or panel that fitted over the end saloon window - fitted with hinges to allow access to the saloon door slide mechanism. Has a MMTB Transfer - Cable Tramways poster glued to the surface. Internal part of this part has a light colour finish on the rear. .3 - as for .3, but without any poster. .4 - as for .3, hinged to the part of door archway component above this panel, including some screws. Has a MMTB Collection of Fares Poster glued to the surface. .5 - as for .4, but without the poster and one small framing piece.trams, tramways, cable trams, components

Since 1895, Hobbies Ltd have been supplying model makers and enthusiasts throughout the world with a wide range of quality model kits, accessories, tools, components and handbooks. The Hobbies Company began life in Dereham, Norfolk in 1881 with a London Office opened later (1922) at 65 New Oxford Street, WC1. In 1895 Hobbies began supplying model makers with their products and in 1897 were incorporated into a Public company. In 1922 at a British Industries Fair the company had a stand advertising their products as "The All-British Firm with a World reputation". Fretwork Outfits. Fretwork Machines. Carpentry Outfits. Strip work Outfits. Also manufactures of Fretwork Tools and Benches, Wood, Circular Saws, Lathes, Picture Framing Outfits, Tools, etc. In 1947 the company had expanded and was still making tools and materials for the amateur craftsman in wood. They had acquired a reputation as manufacturers of quality Fretwork Outfits, Tools, Treadle Machines, Model Maker's Tool Kits. The company also publishers of ‘Hobbies Weekly magazine’ and also sold plans for fretwork, model making and wooden toys. In 1961 they were still manufacturers and retailers of craft tools and materials, timber merchants, light engineers and Government contractors with around 500 employees. A vintage tool made for hobbyists and distributed throughout the world by a British company that is still in existence today. The item is significant as it catalogues the manufactures history at a specific time in the company's development.Foot operated treadle Fret saw called "GEM" subject item is a short saw , the stand in the background is the base for a Delta Q3 model scroll saw. Gem inscription cast into the cast iron frameworkflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, saw, treadle saw, fret saw, pedal saw, the gem, tool, hobbies ltd, treadle, foot operated

A scotch eye auger is perfect for quickly making holes in dry or wet wood for making chairs, stools, and any number of woodworking projects. The scotch eye serves as a peg gauge and whatever peg you make to go into the hole should fit into the augers eye. Robert Sorby & Sons: The forbearer's of Robert Sorby had been cutlers in the Sheffield region of England, dating from the mid 17th century. Robert Sorby and Sons were registered in Sheffield in 1828 as a manufacturer of edge tools, saws, scythes and hay knives. In addition to manufacturing tools, they also diversified into the manufacture of crucible steel for tool manufacture. From circa 1860-1967, the Sorby factory in Sheffield was known as the “Kangaroo Works”. The Kangaroo Brand of tools was made by Robert Sorby & Sons. During the 19th century, they had a large trade in Australasia. By the early 20th century, they were manufacturing carving tools, planes and plane irons, circular saws, wood saws, butchers saws and cleavers, garden tools, pruning knives, coopers’ knives, bricklayers tools and joiners tools. In 1923 Robert Sorby & Sons was bought by Sheffield company Hattersley and Davidson. They are today one of the few remaining British tool manufacturers.The company has a long tradition of making edged tools for various uses and exporting them to Australia, however the subject item was probably made from the early 20th century up until 1967 when the company stopped exporting to Australia.Scotch Eye Auger, Double Twist with Lead Screw, square shaft, socket set at right angleRob Sorbey Sheffield stamped on shaft with Kangaroo trade markflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ring auger, carpenders tools, hole drilling, rob sorby & sons

Tim HOLMES Born Wales Tim Holmes first became interested in pottery on a visit to New Zealand in 1969. After returning home he studied at the local art school, then enrolled at the Harrow School of Art in 1973. While there, he was introduced to Gwyn Hanssen Pigott's work, and returned to Australia to help her set up a pottery in Tasmania. He established his own Garden Island Creek Pottery in 1977, and started making wood-fired pottery, digging and milling his own clay. He used a two- chambered kiln, firing raw- glazed domestic stoneware in the first chamber and earthenware garden pots in the second. In 1988, he moved his pottery to the Potter's Croft at Dunalley on the east coast of Tasmania. He and his wife Tammy now run the Potter's Croft as a bed and breakfast with a craft gallery, and he is still making pottery using a wood-fired kiln. Garden Island Creek Pottery had its own impressed stamp, and work may also be impressed 'TH' or incised 'T. Holmes'. Tim Holmes was a visiting visitor to Gippsland Institute of Advanced Education (later Federation University) in 1983. He was a lecturer at 'Woodfire 86'.Woodfired Stoneware Platter tim holmes, ceramics, artwork, jan feder memorial ceramics collection, gippsland campus, artists, woodfire 86, garden island creek pottery

On a piece of paper subsequently glued near one end of its curved upper face, this length of planed and polished hardwood timber bears the inscription: “A [p]iece of w[r]ec[k] of the Loch Ard wrecked near Sherbroke River”. The timber is carefully worked with rich dark colouring and a uniformly moulded design, suggesting that it was part of a fitting or furnishing that was publicly visible and prominent. If the artefact is what it is declared to be, then it is possible that it formed part of the ship’s railings or companionway stairs. The LOCH ARD was a 1,693 ton, 3 masted barque, built on the Clyde in 1873. In an age of increasing competition for the emigrant passenger trade from steam-driven vessels, special attention was paid to her wooden furnishings and fittings. The Loch Line owners prided themselves on their attractive, distinctively painted, sailing ships. Below decks, where cargo and third class passengers were stowed, was made of iron. But everything above deck, and on show to the saloon and second class passengers, was carved and varnished timber. Captain Daish’s 1878 report for the ship’s underwriters notes “a quantity of general Cargo washed up in a confused mass” in the cove and “a number of Cases, Casks and Bales; also deals and boards floating about in some of the gorges” further west of the shipwreck. Contemporary newspaper accounts also reported a large quantity of cargo and timber washed ashore in the days following the LOCH ARD shipwreck, adding “but those were speedily removed by persons who came down from Port Campbell, Scott’s Creek and other places with carts and pack horses”. The appearance and good condition of this wood artefact, and the aged patina and dated hand-writing style of its pasted on inscription, support the suggestion that it was ‘souvenired’ from the floating debris of the LOCH ARD at or near the 1878 date of its foundering off Mutton Bird Island. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only nine in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The Loch Ard wreck is of state significance – Victorian Heritage Register S417. However there is a lack of documented provenance that limits the interpretive value of this piece of timber (for example, its potential to interpret nineteenth century souveniring and scavenging from shipwrecks along the south west coast of Victoria). Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. A length of hardwood timber, planed and varnished to smooth finish on three sides, with two unfinished tongues protruding from each end (one broken off), possibly from the wreck of the LOCH ARD. The front or upper face is moulded and routed to a regular, linear (skirting board type) design along its entire length, the two sides flat planed. One side contains two inserted dowel rods that have been broken off. The bottom face has not been finished to the same standard. The sample is good quality wood that has retained its density and weight and shows no evidence of having been submerged in seawater for any length of time. Glued on to the upper face of the length of timber near the right hand end is a deteriorated square of paper bearing an inscription. The paper, peeling back and with torn edges, is stuck over an original wood stain but under a subsequent layer of varnish. The faded ink words are indecipherable where paper is missing, but written carefully in an old fashioned cursive script.The inscription on the paper reads: “A [p]iece of w[r]ec[k] of the Loch Ard wrecked near Sherbroke River”. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, nineteenth-century souveniring, shipwreck scavenging, loch line sailing ships, wood sample

This Ophthalmoscope Kit would have been used to examine and test eyes and ears. It was most likely used by Dr T. Ryan of Nhill during the early 20th century and passed on to Dr Roy Angus, who was his assistant at one stage. It was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Ophthalmoscope Kit; combination Otoscope and May Ophthalmoscope, part of the W.R. Angus Collection. Electric ophthalmoscope and Otoscope in hinged, leather covered, hinged wood box with slide catch, lined with blue fabric. Kit contains an Ophthalmoscope head, an Otoscope head, an aural speculum, a stainless steel handle (3 pieces) powered by 2x AA batteries, orange rubber peg, 8 globes. The Ophthalmoscope head is inscribed "SURGICAL MANUFACTURING CO. (AUST.) (PTY LTD) / MADE IN GREAT BRITAIN, J.S & S." on reverse "PAT 338 766" and on the top "MAY ™ OPTHALMOSCOPE IMPROVED". Otoscope is inscribed "WAPPLER ELECTRIC CO. / NEW YOURK U.S.A.", "PAT. DEC 12 1916"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, medical treatment, medical history, medical education, medical text book, ophthalmoscope kit, otoscope, eye examination, ear examination

This set of handmade tools was made by Jim Williams for his own purposes to make designs and components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This set of handmade tools is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This set of tools was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. A set of 6 small, fine wood working and carving tools stored in a ‘Craven A’ cigarette tin. The tools have been handmade by Jim Williams for the purpose of making ship models. This set of tools is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. (Also included is a spare handle.)On the tin; “CORK TIPPED / TRADE MARK / CRAVEN “A” / VIRGINIA / CIGARETTES”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, carving tools, handmade wood carving tools, craven a cigarette tin, sovereign of the sea, ship model, hobby, ship model tool

Ipecacuan powder, or Dover's powder, was a common emetic used through the eighteenth and nineteenth century as a sudorific and prescribed for colds, coughs, insomnia, rheumatism, pleurisy, and dysentery. Gum arabic was often used as an additive to promote binding of other ingredients to a liquid medium. Likely gum arabic was not prescribed by itself even though there are some health benefits for doing so, such as slowing the rate of absorption of some drugs within the gut. Camphor was a stimulant, narcotic and sudorific and was administered in pill form which included part ipecacuanha and opium to non acute fevers and remedy chromic rheumatism, as part of a liquid mixture to treat violent headaches as well as rheumatism, or in a solid form stored in a small bag worn around a patient's neck as a preservative against infection. Lint was commonly used for medical dressings.The right one of two marching medium sized wood drawers. Each drawer features four sliding lids on their top face which has a corresponding paper label depending on its contents as well as a small semi-circle notch, these lids slide laterally in pairs for either direction. These drawers are found in the front storage location of the parent item and bellow a row of glass containers.Ipecacuan. Powder. Gum Arabic. Camphor. Lint.volum collection

"Sena" is the medieval Latin and archaic spelling of "senna", which is used most often to treat constipation or to clear out a patients bowels before a medical procedure.The left one of two marching small sized wood drawers. Each drawer features one sliding lid on their top face which has a corresponding paper label depending on its contents as well as a small semi-circle notch, these lids slide vertically in one direction. These drawers are found in the front storage location of the parent item and bellow a row of medium sized drawers.Sena.volum collection

Rochelle salts, or potassium sodium tartrate, are a type of tartaric acid which was used medically as a laxative similar to sena and tartar Emetic.The right one of two marching small sized wood drawers. Each drawer features one sliding lid on their top face which has a corresponding paper label depending on its contents as well as a small semi-circle notch, these lids slide vertically in one direction. These drawers are found in the front storage location of the parent item and bellow a row of medium sized drawers.Rochelle Saltsvolum collection, medicine

The SS Diomed was the last ? of the Blue Funnel Line's coal burners and the 4th (of 5 vessels) bearing the name Diomed and built in 1922. She made her last voyage from Australia to England in 1952, where she was broken up. The ship had been in service in Australia for 30 years and as a parting gesture the ship's bell was presented to the Mission by Alfred Holt & Co., the ship's owner. The bell was originally presented to the Port Melbourne Mission to Seafarers. It seems to have been a mark of respect for one of the Mission workers who regularly visited the ship. On closure of the Port Melbourne Mission in the late 20thC , the bell was transferred to the Melbourne facility and has been in permanent residence since then. The bell underscores the strong working relationship between the Mission to Seafarers, as an organisation, and the various companies and agencies that work on the oceans. It also represents the traditional relationship between Australia and England in that seafarers who visited the Mission were once primarily of British backgrounds or descent. While this situation has changed in more recent times, it is that traditional relationship that saw the establishment of the Mission in Australian ports in the first instance.(NB the previous 2 Diomed's had both been sunk in WW1 1915 and 1918 and the re-use of the name indicates it was a well respected name subsequently re-allocated to the 1922. and 1956 vesselsA brass bell with the word "Diomed" embossed on its waist and the word has also been painted black. The bell is mounted overall on a heavy carved wood base with brass dolphins at either side forming a support frame for the brass crossbar mount from which the bell is suspended. The clapper has a pull rope attached to it but the casing of the mounting prevents the bell from being fully rung.Embossed at the waist of the bell: "Diomed". Brass plaque on wooden mounting: "PRESENTED BY/ALFRED HOLT & CO/BLUE FUNNEL LINE/LIVERPOOL ENGLAND/1922-52/APRIL 1953"diomed, blue funnel line shipping, alfred holt & co, bell, ship's bell, dolphins, mission to seafarers, r. stewart murray, randall stewart murray, lay reader, port melbourne, 1953

This butter pat profiler may have been manufactured post 1967(year post codes appeared in Australia) however the post code was only stamped on after it was machined. This type of butter mould was used by rural families to fashion home/farm made butter. This period was in most rural regions a time of self sufficiency where any domestic type implement which could be fashioned by the family would be crafted with skill. Shopping for goods required catalogues from stores located in major rural towns and cities and involved lengthy waiting times. Travelling to and from these specialised stores was not pleasant due to the relatively poor quality of the roads and the lengthy times taken. The small general stores in the Kiewa Valley could not cater for all the needs of the valley. The 1960's was a time when facilities especially goods and services started to improve drastically. The S.E.C. of Victoria with its Kiewa Hydro Electricity Scheme provided not only an improvement of facilities in the valley but also a increase in the population. This increase resulted in a greater demand for local produce.This item is one of many domestic food processing implements used by Kiewa Valley households in the mid 1900s, whether on the farm or in the small towns and hamlets. Self sufficiency was the key to survival during these early times. Where ever possible supplies from within the valley were preferred to that brought in by travelling salesmen or traders. This butter mould and butter pat was commonly used to fashion "home" made butter throughout the valley and in some cases supplied to "outside" regional towns. Although this method of production was phased out by better access to goods from nearby cities the revival of the good organic home grown produce in the 1980s saw a greater demand of this type of farm based produce.This butter pat is one of two,see KVHS 0071 (A). It has been crafted from wood. One side has grooves running from the handle to the square shaped bottom. These grooves would stop the wet butter from clinging to the pat. The top side of the pat has been bevelled on both sides and the bottom edge. The hand grip is flat and curved to allow for a comfortable hold.domestic food preparation, wooden butter pat, butter mould circular, dairy industry

Not knownPolished brown wooden box with a metal handle at the top and with a metal chain attached. The chain has a key at its end. Opened box - One side holds two metal rods with a wooden handle and plastic cord. The other side has several knobs (brass?) attached to a fitted piece of wood across the top. Both sides of the box each have a small hole.Engraved in the lid - 'Dr Stohrer / & Sohn / Leipzig'dr stohrer and sohn - leipzig, cased vibrator machine

The subject item is a good example of a large, hand-operated Bentwood box butter churn used to make up to 14 pounds of butter. It was made in Gisborne, Victoria, by the famous manufacturer, E. Cherry, and is known as an Improved Patent No.2 model probably dating from the late 1800s. The Cherry works specialised in making all types of butter churns and equipment for both domestic use on farms and small butter factories during the late nineteenth and early to mid. twentieth centuries. Milk was "separated" to retrieve the cream which was then beaten to make butter. E Cherry began making various models of Cherry butter churns in 1858, Edward Cherry migrated from Herefordshire England to Australia in 1855 with his wife Ann Appleby, nee Davis, and established a joinery workshop at Gisborne, Victoria. He began by making butter churns in his spare time and his product soon became popular allowing him to establish a viable business. A factory was established in 1875 and he started to make churns of all sizes including up to industrial scale. He exported his products to many countries around the world, Edward Cherry died in 1909 and the business was then run by his son George until he died in 1917. E Cherry's other son Thomas (1861-1945) was also involved in the firm maintaining an interest for several years. He had been born in Gisborne and became a senior house medical surgeon at the Melbourne Hospital in 1890. He continued his studies at Kings College London, eventually becoming a renowned bacteriologist and agricultural scientist. A significant giving an snapshot into how early industrial manufacturing became established in Australia.Rectangular manual butter churn, footed wooden box containing an X-shaped wooden interior rack, which is joined to an exterior metal hand crank with turned wood handle, through a hole in the box. Beneath the hand crank is a hole from the interior lined with metal. The lid has a carry handle affixed to the lid on two cross pieces attached to the lid by brass screws.Label in block transfer Manufactured by Cherry & Sons Pty Ltd Gisborne, Victoria Size "00"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, butter churn, cherry and sons, wooden butter churn

Conditions of sale by private contract dated 15th October, 1929 between R.A. Wilkinson (seller) and E.L. Thomas for freehold land situate 18 McClure Street, Ironbark being Crown allotment 497 section K described in Crown grant volume 2471 folio 494141, together with 5-roomed stone, wood and brick dwelling and all sundry. Price 270 pounds.organization, business, h.a. & s.r wilkinson real estate

Typed notes on the past, Garden Gully area. Mentioned is the Wattle and Barnard Street area. There were three hotels on the intersection: The Belvedere, Danaher's Hotel and the Red Lion. There was also Warrens Grocery Store. There were mullock heaps and wood stacks. The manager of the Garden Gully Mine was also held up and robbed when his horse was shot at and wounded. There was also the Garden Gully Ghost.document, digging up the past, c r b, belvedere, bob matchett, danaher's hotel, benola, red lion, mitta cook, warrens grocery store, tram de-railments, road metal, garden gully mine and battery, c b v homes, the union bank, national hotel, garden gully ghost, knipe's castle, g c h a jess's paint shop

A cream programme with green and black print on the cover and the words, ' Tongan Methodist College Boys' Choir Concert Programme. Conductor : Rev. A.H. Wood, M.A., B.D. Principal of the College. Price sixpence.' It also includes a photo of the young men in their traditional clothing. Inside the programme is some information on Tonga and the Choir including photos. On the back of the programme is a list of the 'Personnel of the choir.' C. 1933.program, music, singing, lydia chancellor, collection, music, entertainment, performing arts, singing, programme, program, event, tonga

The Bocian is a versatile training sailplane that first flew in 1952. The type has been modified in several respects over the course of production by SZD (tailplane and rudder in particular). About 600 have been built; many for export to 27 countries (including Australia). The aerobatic capability and fine performance (best glide ratio of 26) has enabled the Bocian to be used to train competition pilots as well as those of lesser experience. Many world gliding records were set in the 1950s and 1960s in Bocian gliders. The Museum’s example is a type D test flown in Poland on 3 and 4 April 1963. It was imported into Australia in September 1963 by Austerserve Pty Ltd. The first owner was the Alice Springs Gliding Club and the glider had name “Cumulus” painted on the side of the fuselage (since removed). The glider had recorded 726 hours 46 minutes flying time from 2138 launches as at July 1967 when it was transferred to the Darwin Gliding Club. It appears that the glider was damaged in June 1968. The substantial repairs to the fuselage, both wings and tailplane and other minor repairs were completed on 13 October 1968. The glider continued flying with the Darwin Gliding Club until August 1969 at which time the service to that club amounted to 59 hours 7 minutes flying time from 348 flights. Between August 1969 and August 1976 no flights are recorded in the logbook. It is understood that on its last flight at Bachelor, south of Darwin in the Northern Territory (August 1969) it was severely damaged when it crashed after spinning while being auto-tow launched (although this is not expressly mentioned in the logbook). Reg Hancock purchased the damaged glider and rebuilt the port wing and restored it to airworthy condition (September 1976). It was then transferred to Colac, Victoria, and used by the Colac Gliding Group at the Yeo airfield until February 1981, adding another 153 hours from 403 flights to the glider’s record. After airworthy inspection in September 1982 the glider was used by the Geelong Gliding Club until 1983 (logbook details not held). The 20 year survey was then due and the glider fell out of service. In the course of the most recent restoration attempt it was discovered that the glue used in construction had deteriorated and that it was no longer feasible to bring it back to an airworthy condition. Subject to restoration, this exhibit may be representative of the 1950s - 1960s Bocian two seat sailplane typeThis exhibit is a large two seat glider /sailplane of wood and fabric construction. All components are present with the exception of instruments. However, at the time that the aircraft was transferred to the Museum it had been taken apart for major restoration work. As received it is stripped of the top coats of paint and a number of components (including, amongst others, tip fairings, nose cone and cockpit elements) that were removed for facilitating the repair process. The glider, serial number 803, was registered as VH-GNLaustralian gliding, glider, sailplane, bocian, cumulus, alice springs gliding club, darwin gliding club, colac gliding group, geelong gliding club, hancock

Bendigo Advertiser "The way we were" from Thursday, March 17, 2005. On parade: in the late 40s, early 50s, Eric Finch general carrier and wood merchant donated a truck each Easter to be used in Easter Fair activities. This float on the truck was Teddy Bear's Picnic, by members and workers at the Benevolent Home, now the Anne Caudie Centre. Eric Finch is standing by the truck.newspaper, bendigo advertiser, the way we were

Slide. Great Northern Gold Mining Co. situated at Market Street, Eaglehawk. Poppet head, chimney, large stacks of wood in foreground. Engine room building has 'Gt. Northern GMC' printed on side. Mine frontgs onto footpath, roadway in front. Neat wooden fence surrounds front of mine buildings. Image taken from 'Healthy Golden Bendigo' book.No. 20 printed on bottom of slide.mine, gold, great northern., bendigo mines-jack hattam collection

Photograph: group of seven young men seated or standing dressed in suits waitcoats , ties and hats. Shown in background a bicycle, beer bottles and 2 outbuildings. One decorated with scotch thistle, Irish shamrock, english rose and a flag of unknown origins. Photo under glass, mounted on grey card and framed with a very ornate wood and plaster moulded frame cream in colour with some gilding.W.H. Grose, Photographerperson, group, male group

2 Black and White copies of photographs of Lewis Lewis Motor Tourist Service vehicles from the 1930's, Under glass in 2 blonde wood frames with gilt edging, markings read 'Lewis Lewis REO 1930', 'REO 1932', 'Lewis Lewis Motor tourist service Boort 1920 to 1940 and owned Weighbridge for weighing wheat trucks - Lewis Lewis Bus Bean'organization, business, lewis motor service, lewis lewis, lewis motor service

The concertina was owned by Simon McDonald. He gave the concertina to Myrtle Porter in exchanged for town water. Simon McDonald lived in Melbourne Rd., Creswick.Simon McDonald (1906 - 1968) was a noted self taught Australian folk musician whose home was in Creswick. Consider in the industry as the most important.20 Button Anglo Concertina & Case. Hexagon shaped Concertina. Both sides have fretwork and 10 bone buttons making it a 20 plus single button Anglo concertina. The leather straps have at sometime been replaced with white plastic strap. It has 5 bellows in black and white pattern leather. The hexagon wood case is lined, although the lining is showing wear.One side: small disc with Lachenal & Co., Patent Concertina Manufacturers, London. Opposite side: Initials on red card J.W.Gsimon mcdonald, anglo concertina, creswick

Metal flat bar with notched standing bar attached, two foot placement blocks which can be placed in notches along the bar using metal wing bolts. At each end there are two metal spikes with a head and ring attached which can be driven into the gray und. The blocks are solid wood triangular shaped with a slightly curved metal facing where the runners feet are placed. Nelson starting blocks Unley SA

Curry comb made of mild steel and wood. The metal part has two functions. It has six rows of small teeth for cleaning or Body/Dandy Brush (other Grooming Brushes) and the other side has wider teeth for use as a mane/tail comb. The wooden handle has been enamelled black, the metal ring to hang it up has been enamelled white.rural industry, livestock