The portable lock up at Eltham is not original to the site. The date of construction is unknown. It is a pre-fabricated design and each of the timber panels are individually numbered on the inside surfaces. It is amongst a large group of portable locks up,categorised as 'Portable Lock Up - Timber - Later' and also known as the "Casterton style", based on the only known plan for portable lock ups, built for the Casterton Police Station, in 1907. The later portables have been in use since the 1880s. It is not known how many lock ups of this type have been constructed in Victoria. At least 50 examples have been documented around the state. Of these, 42 are known to be extant.This lockup used to be located at the Police Station in Pryor Street and was then stored in Youth Road before being acquired for the Local History Centre 9 colour photographseltham, main road, police residence, local history centre, eltham district historical society, courthouse, youth road

The portable lock up at Eltham is not original to the site. The date of construction is unknown. It is a pre-fabricated design and each of the timber panels are individually numbered on the inside surfaces. It is amongst a large group of portable locks up,categorised as 'Portable Lock Up - Timber - Later' and also known as the "Casterton style", based on the only known plan for portable lock ups, built for the Casterton Police Station, in 1907. The later portables have been in use since the 1880s. It is not known how many lock ups of this type have been constructed in Victoria. At least 50 examples have been documented around the state. Of these, 42 are known to be extant.This lockup used to be located at the Police Station in Pryor Street and was then stored in Youth Road before being acquired for the Local History Centre 2 colour photographseltham, main road, police residence, local history centre, eltham district historical society, courthouse, youth road

In early 1974, as an Engineer with the Country Roads Board, David came to Orbost as the Supervising Engineer for the construction of the new bridges which were part of an 8.4km Orbost bypass road design. This was a major project involving not only a new bridge over the Snowy River (including Lochiel Lagoon), but other bridges over Ashby’s Gulch and Watt’s Gulch. These new bridges were opened in November 1976 with the unveiling of a plaque on the eastern end of the $2.4M Snowy River Bridge. The new bridge, built by the CRB at a cost of $2.4 million, is 1.6 metres above the record flood levels of 1971. (ref. May Leatch) This newspaper contains contemporary reports of a significant event in Orbost.A Snowy River Mail newspaper, dated 1.12.1976. It contains news articles, photographs and advertisements. The main article relates to the official opening of the Snowy River Bridge and the unveiling of a plaque on the eastern approach. It also contains a history of the first Snowy River Bridge.snowy-river-bridge orbost-bridges snowy-river-mail

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Stained Glass at the St John of God Hospital Chapel .ballarat, heritage, st john of god, hospital, stained glass

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Colour photograph of stained glass feature wall at the chapel in St John of God Hospital, Ballarat.stained glass, st john of god hospital, ballarat, bruce hutton, almond glass works

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. stained glass, st john of god hospital, ballarat

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. stained glass, st john of god hospital, ballarat, bishop, pectoral cross

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Stained glass panel of 'Weeping Bailey's' house, now part of St John Of God Hospitalstained glass, st john of god hospital, ballarat, bailey's mansion, weeping bailey, architecture

After his experience in designing moderately priced furniture in the 1930s and managing the construction of aircraft by an inexperienced workforce during World War II, designer Frederick Ward developed Patterncraft paper patterns. They were available by mail order through Australian Home Beautiful from 1947. For those with rudimentary skills Ward developed Timber-pack kits of components ready to glue and assemble. Blueprint, his subsequent project for the mass-market was launched in 1951. At a time of austerity and shortages, Blueprint patters helped Australians furnish their modest homes with modern furniture they had made themselves. Nanette Carter, 2017Fred Ward, Detail sheet for 'Home Beautiful Blueprint Furniture' No. 6, includes technical drawings and instructions, 1950-1951furniture, patterns, diy, rmit design archives

At its peak the Colac-Beech Forest-Crowes railway employed more than 21 staff tending the lines that the trains ran over. Gangers (the men in charge of the track gangs) tended to be promoted into the Otways but many of their subordinate repairers were local recruits. A few of the men who worked on the original construction gangs of 1900-02 remained and obtained positions in the track gangs along the line, but these eased out over time. The track was maintained by seven three-man gangs based at Colac, Barongarook, Gellibrand, Banool, Beech Forest (where the second Beech Forest crew was based at Wyelangta), and Lavers Hill.Track gang on an NK wagon at Beech Forest, c.1940. Snow covers the ground. B/W.colac; beech forest; crowes; railway; track gangs;

Harcourt branch of the Australian Natives Association was formed in 1908, meeting in a chaff shed behind the local grocer shop. In 1911 the branch contracted with Mr Sutherland of Barkers Creek to build a hall of boxed concrete construction. Sutherland was a pioneer in the use of concrete for structural purposes.He subsequently had a career as City Engineer at Camberwell. The ANA branch conducted many social occasions in the hall and gave community leadership for upwards of fifty years in addition to its friendly society/health insurance activities.. This was the only community hall in the Harcourt community until it was superseded by the Harcourt Leisure Centre in 1991 It is now the home of Harcourt Heritage Centre.A community hall of pioneering construction method, provided to the community by a friendly society.black and white postcard depicting a community hallA N A Hall, Harcourt

This image is one from a series of portraits taken by Rob Elliott to record the character of the Border District through the faces if its identities. Ronald Joseph Hoban was born in 1930. In 1951, Mr Hoban, or "Hobie" as he became known, opened his hairdresser and tobacconist business in Corryong. This was at the height of the construction of the Snowy Mountains Scheme and business was thriving. As the tobacco industry slowed down, Mr. Hoban branched out to selling sporting equipment with a focus on fishing tackle and even selling guns and ammunition when it was legal to do so. He was an active and much-loved member of the Corryong community until his death in November 2014. This portrait is significant as it depicts a person who made a significant contribution to community of Corryong and district. The business he established still operates as Hobie’s Sports Store.A black and white photo of a man standing behind a barber's chair, scissors in hand. He has glasses pushed up on his forehead. Tobacco products are stored on the shelves in the background.ron hoban, corryong barber, people of the border

Image is an ESCo tram leaving the intersection of Grenville St. and Bridge St. and proceeding east along Bridge St. Photo taken behind junction points. Has the Nicholl & Allan building on the left side of the photo and the Bucks Head Hotel on the right. Numerous people walking around the street. Shows overhead construction in the area. Title in top left-hand corner "Bridge St. (Looking East), Ballarat. On the rear is places for stamp, address and manufacturer's name in a fancy motif "WTP". Photo taken soon after opening, no roof-mounted destination boxes. See item 9010 for a printed version. yields information of Bridge St at Grenville St, c1905B&W print, laser print and scanned images of a coloured postcard lent to the BTM by Mr. Norm DePomeroy, August 1998 and Sovereign Hill reproduction of this card contained within a scrap book. See Notes for various image holdings and history.trams, tramways, esco, sturt st, postcards, bridge st., grenville st

Photograph of Flinders St looking east from Swanston St - shows the entrance to Flinders St station prior to the construction of the current building. In the view are one cable tram, many pedestrians and some horse-drawn vehicles. A hoarding on the left hand side possibly indicates work is underway on the new station building. A sign on the pole advises that cable trams went to Spencer St for a penny and for 3d to Port Melbourne or South Melbourne. In the background are buildings for Sargood Bros, Thomas Whitelaw Home Decorators, The Hub, a sign on the Young & Jackson Hotel advertising a Women's Exhibition. There is a telephone pole line on the south side of Flinders St.Yields information about Flinders St, c1905.Black and white photograph on paper.In pencil on rear "163 OB"trams, tramways, cable trams, flinders st, flinders st station

2903 SUNNY CREEK formerly YARRAGON EAST. Sunny Creek State School, first called Yarragon East, was situated on Sunny Creek Road between Yarragon and Trafalgar and was opened in 1888. It was generally served by two teachers or a Head Teacher assisted by a Sewing Mistress. Edwin Mann taught there for 35 years, with his wife, Mrs Mann, as the Sewing Mistress for some years. [Extracted from Vision and Realisation: A Centenary History of State Education in Victoria, Vol. 3, 1973. This does not contain any details of the actual construction of the school, which is a typical Education Department building, and may date from later than 1888]High local historic significance, with some social significance: reunions of old students still held. (Dr Linda Young, Deakin University, significance assessment July 2009)Single-classroom State School. It is a rectangular-shaped timber building with weatherboard walls, timber frame and corrugated iron roof. An outside verandah is situated along the side of the building. Inside there is a small entry porch, a blackboard the length of the room (with fireplace) and a small store-room/cloak room. Built in 1888Has a name board above the front window that reads " SUNNY CREEK SCHOOL SS2903".school, sunny creek, old gippstown, west gippsland, gippsland, gippsland heritage park, goldfields, coal mines, victorian era, moe, historical village, education, sunny creek road, baw baw shire, yarragon east, latrobe valley, old gippsland heritage park, latrobe city council, board of education

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Detail of a nun in stained glass window at St John of God Hospital, Ballarat.stained glass, st john of god hospital, ballarat, nun, bruce hutton

Originally labelled "Beauville Estate, Established 1936, Still Thriving 65 years on, 10th March 2001", the Beauville Estate Album contains colour photographs of houses in the Estate. They were taken around the time of the Beauville Estate’s 65th Heritage Celebration held on 10/03/2001 and donated to the Caulfield Historical Society shortly afterwards. Photographer Bev Baxter. From Glen Eira’s Heritage Management Plan by Andrew Ward (1996) Vol 2 p63: The inclusion of shops in Murrumbeena Road and a common parkland developed at the rear of the properties were complemented by the construction of a gas display home at No. 10 Beauville Avenue.City of Glen Eira’s Heritage Management Plan Vol 2 p79 (this is p84 of the pdf version) – HO12 Beauville Estate and environs, Murrumbeena: The Beauville Historic Area is important at the State level as the first large housing estate undertaken by the AV Jennings Construction Co, later Jennings Group Limited, Victoria’s largest home builder. It is important also as a very early estate development incorporating a range of features other than houses and including made roads, shops and recreation facilities. In this respect it was the forerunner of the comprehensively planned housing estate of the post war era. The estate is distinguished by its aesthetic values, as is the earlier and comparable Hillcrest Estate, which are formed by a combination of restrained diversity in house styles, with the exception of no. 30 in the emerging International style, and by a landscaped garden environment. Colour photograph of cream rendered house with decorative unpainted brown brick features. Other features include a porch with two decorative open arches, tiled roof, 2 sets of matching double sashed windows with large square pane within each set, agapanthus lining the brick paved driveway and a cast iron work metal letterbox with number "10" on it. murrumbeena, houses, beauville avenue, architectural styles, 1930's, inter war style, a.v. jennings, av jennings, jennings, brick houses, beauville estate, porches, arches, sir albert victor jennings, a v jennings construction co, beauville estate heritage area, glen eira city council, architectural features, jennings group limited, land subdivision, gardens, beauville historic area, brick features, sash windows, paved drives, cast iron work, letter boxes, gas display houses

.1) This one was used in the Writing room which later became a Meeting room then finally the RSL Building & History room. it was attached to the LH side of the Fire Place and ran an old Electric Heater on the Hearth. It was used up to about 2005. .2) This one was in the Old Kitchen built on the side of the Soldiers Memorial Institute in the mid 1960's This one ran the Electric stoves used by the Womens Auxiliary of the Bendigo RSL and to make the Rum & Coffee for the ANZAC Day Dawn service. The kitchen was removed as part of the Renovations in 2016 - 18..1) Heater meter, metal construction black coating, top face has a glass section with a "usage meter" saying "coins paid, unused", metal plate under with details re numbers, maker, coins per hour, on right side slot for "Shillings only" with knob, removeable lockable tray at bottom for coin storage and removing. .2)Same style as .1) but a different glass face style metering, it has 11 circular dials with one hand, these show "Coins paid, coins unused", this one shows the round meter going around when in use. The only differance between to two shapes is at the top re fixing to a wall..1) On plate, "Remote Control Switch - for alternating switch No 26 204 020 - Type Wik 36.1 - Adjustable 1-6 coins per hour, Adjusted for 1 coin per hour" On stickers, "insert 10 cents - Turn knob to right". .2) On glass section, "230/240 revs per KWH - 1200 - Serial No 8338380 - 5 - 50". On label stuck on, "10 c equals 1/2 hour"brsl, smirsl, shilling

K.H.E.S.Photos 4 coloured and 8 black and white with the Title printed below each one. 1. S.E.C.V. Telephone Switch Board (See also KVHS 0847) 2.West Kiewa Tunnel 3. Construction of Underground Power Station 4. Pretty Vally Camp 5.Outside Kiewa House, Bogong 6. S.E.C.V. Saucer (See also KVHS 0128) 7.Insulator Disk Struck by Lightning 8. S.E.C.V. Map of the Kiewa Hydro Scheme 9.Howman's Gap Camp 10.Tunnel Excavation Face 11. Mt Beauty Townhship 1948, looking north east 12. Mt Beauty Township - no labelkiewa hydro electric scheme photos

The president of the Ballarat School of Mines in 1975 was M.B. John, Pink, soft covered, stapled, annual report. An image o the barbecue area at Mount Helen is depicted on the front. Contents include: financial statement, resignatino of K.C. Webb from the Council, tertiary level merger, State College of Victoria at Ballarat, Ballarat girls High School, Perpetuation of the school of Mines Roll of Associates, campus planning, G.J. Harrison, Campus master Plan, The Following staff appointments were made: R. Maud, A. Maksay, B.M. Lloyd, F.J. Bonner, L.J. Miller, M.S. Brooke, R.A. Marty, Peter Blizzard, J.I. Stewart, N. Clarke, retirement of Mollie Jardine, student residences, tennis court construction, TAFEflecknoe, webb, hillman, nicholson, harrison

The City of Moorabbin Historical Society was formed c 1960 by a group of Moorabbin residents who were concerned that the history of the area should be preserved. A good response to a call for items related to the historical area of Moorabbin Shire brought donations of a wide variety of artefacts which are now preserved by the current members of CMHS at Box Cottage Museum . Helen Stanley, Secretary of CMHS, began producing a Newsletter for members in April 2007 to provide current information and well researched items of historical interest. Helen Stanley has produced a bi-monthly Newsletter, 2007 - 2013, for the members of the City of Moorabbin Historical Society that contains well researched interesting historical items, notification of upcoming events, current advice from Royal Australian Historical Society , Museums Australia Victoria and activities of Local Historical Societies. The Newsletter is an important record of the activities of the CMHS. 2 x A4 paper printed on 3 sides with attached A4 page of photocopied photographs of St Peter’s Schoolchildren at Box Cottage Issue 14 of the bi-monthly, City of Moorabbin Historical Society Newsletter produced by Society member and Secretary, Mrs Helen Stanley in October 2009. Notices of the meeting October 25th , the purchase of a Sign directing visitors to Grace Lewis Room, the maintenance work on Box Cottage by Glen Eira Council and the construction by Dennis Maynard CMHS of bench for the wash-trough in Barn. A report on the visit by Grade 1 pupils from St Peter’s Primary School, East Bentleigh on October 12th and a page of photographs of the event. CITY of MOORABBIN HISTORICAL SOCIETY / October 2009 NEWSLETTER city of moorabbin historical society, stanley helen, melbourne, moorabbin, brighton, cheltenham, ormond, bentleigh, market gardeners, pioneers, early settlers, moorabbin shire, box cottage museum, st peter’s catholic primary school east bentleigh, lewis grace, john keys, keys road

Black and white photograph of a coach building business. Note the number of workers involved in the manufacture of the different styles required by customers. To the right of photo there are a number of workers using machines to manufacture the different body parts that are required. One cart to left of photo appears to be the finished product. Centre top there is a cantilever structure with bodywork stacked on top and a number of wheels, large and small, hanging from the side. There are also a number of wheels hanging from posts of the building framework. Note the differing clothing styles of the workers from shirt, trousers and apron, to hats shirts, waistcoats, trousers. Differing stages of construction have bodies on tables, wooden frameworks, boxes and wooden horses.industries

Handwritten 13 page history of ''Choir of Sacred Heart Cathedral, Bendigo'' - no author given. This document covers much detail incl. construction of the organ; cathedral organists over the years with details - esp. in relation to Edward Allen Bindley and family (Conservatorium and the Bendigo Conservatorium Choir); the Cathedral Choir and its performances (including first showing of ''Quo Vadis'' at the Princess Theatre; 'Congregational singing' conducted by Bindley; sacred concerts at the cathedral (including names of soloists); details of the solemn opening of cathedral ; later history of Bindley; details of the 1977 concert for the celebration of the consecration; detail re period of Mr John Hogan with details; final page has ''People to Contact'' .church, history, cathedral of the sacred heart, princess theatre, bindley, mr john hogan.

Clothing. This garment has been severely damaged - the waistband has been removed, and a 45 cm diameter circle has been cut from the polished cotton lining. There is also fabric damage adjacent to the internal side pocket seam, velvet binding at hem, stiffened linen lines the inside at the hemline - 20 cm deep, and a narrow binding of black velvet encircles the lower hemline. While the waistband has been partly removed, the original two metal hooks, and three metal eyes are still in place. This garment is severely damaged, but it does still give insight into the inner construction of the garment. Ten ''gores'' or sections make up the circle of this skirt.costume, female, full length black skirt

Pale yellow 12 page book titled 'Bendigo the Region to Live Work & Invest'. On the front cover is a scenic view of Bendigo and on the back cover a picture of some quartz and gold nuggets on a green background. Sections in the book are: Live Work & Invest, Lifestyle, Access, Community, Infrastructure, Labour Force, Business, Opportunity, Successes and Information. Each page has a colour picture, they are:- Hargreaves Mall, Eaglehawk Golf Course, Map of Victoria, La Trobe University, Big Hill, Regional Office Department of Planning & Development, Sandhurst Farms, Construction Activity, Products of the Region, Dr. Ian Macbean, Mr Evan Jones and the Capital Theatre with information on each.book, bendigo, bendigo, bendigo - the region to live, work & invest, bendigo regional development board, dr ian macbean, mr evan jones, kate mildren, richard gibbs, express printers, hargreaves mall, eaglehawk golf course, map of victoria, la trobe university, big hill, regional office department of planning & development, sandhurst farms, construction activity, products of the region, capital theatre

Pale green auction catalogue with dark green printing for a sale held on the 27th and 28th July '93 for Dept. Planning and Development Construction Group former Plant Depot, Port Melbourne. For sale on day 1 were hand tools, equipment, power tools, jackhammers, jacks, paint, contractors' equipment, general stores, major plant & vehicles, backhoes, tractors, drilling rig, tip trucks, vibrating rollers, trailers, concrete mixers, caravans and site office. On Day 2 were sundry contractors equipment, tools & stores, used and modern office furniture and computer equipment. J. H. Curnow & Son P/L were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - dept. planning and development construction group former plant depot, j h curnow & son p/l, noel dyett, fred dyett, ian dyett, bolton bros p/l

Photocopies of some pages mentioning the Museum. Part of a letter by P H MacGillivray, President, Report on the Botany Class, Report on the Chemistry and Metallurgy Classes, The Museum, including what exhibits, attendance of visitors and opening times. A number of pages of Donations to the Museum from 1/7 1891 to 30/6/1892, including the names and address of the donors. There is a list of the Classification of Specimens (received during the year). Also mentioned is Botany - Lecturer - J B Lillie Mackay and Zoology - Lecturer - J B Lillie Mackay. There is also a part of the printing about Architectural and Geometrical Drawing, Machine and Building Construction - Teacher - W H E Nicolai.museums, peter ellis collection, bendigo school of mines, dr macgillivray, rev j garlick, dr colquhoun, mr g alec thomson, mr j eardsley edwards, dr quick, j m harcourt, j robshaw, r bloomfield rees, j d crofts, w h carwardine, dr dendy, professor marshall hall, professor baldwin spencer, department of education, sir frederick mccoy, baron von mueller, j w faul, john robshaw, henry jackson, j b lillie mackay, melbourne university, mr a south, department of forestry, mr perrin, the pharmacy board of victoria, education department

"Grace Blake’s conversations with older members of the Club have elicited the following information during July 2014: • Don Christie recalls the machine being acquired by (or donated to) SMRC in the 1960s. SMRC later donated it to APRC. • Bob Duncan remembers it being at APRC. • Max Shaw joined the club in 1946 but doesn’t recall it at all. • Peter Watson recalls collecting the rowing machine from the old APRC club house before its demolition (c. 1995). The AP-SMRC machine carries a ‘maker’s plate’ with the name Moore... Moore Crane and Engineering Company Pty Ltd was a subsidiary of Malcolm Moore Industries Ltd whose manufacturing engineering works were located on Williamstown Road, Port Melbourne from 1927. The founder established the main business in 1921 and retired in 1953.21 The business was delisted from the Australian Stock Exchange in 1976. Grace Blake advises that some of the earlier SMRC members were plumbers and therefore worked in trades connected with engineering. She reports that Peter Watson recalls some of his contemporaries completing their engineering apprenticeships at Malcolm Moore Industries Ltd in the 1970s. There are still many unanswered questions concerning the history and provenance of the rowing machine at the time of writing this report, but the connection with a local engineering works is certainly fascinating. Questions to explore in the future include: Did Moore manufacture the machine, or import it (and perhaps assemble it) under licence? Was this machine a ‘one-off’ or did Moore make / distribute others within Australia? When, why and how did SMRC acquire the machine? Why did SMRC decide not to retain it, but to pass it over to APRC? And how did APRC use it?" 2014 Significance Assessment, pp38-40. "The ‘Moore’ Rowing Machine at the Albert Park – South Melbourne Rowing Club (AP- SMRC) is a rare example in Australia of the Kerns patent design from 1900. This machine may not, however, be that old in construction or use. The AP-SMRC machine is almost intact, appearing to lack only the leather straps for fastening the rower’s feet to the foot-rests. Spalding manufactured the design in the USA in the early decades of the 20th century, but the metal elements in its models are traditionally black. The bright red paint on the AP-SMRC machine suggests something different. The AP-SMRC machine carries a maker’s plate that associates it directly with a local engineering business, Malcolm Moore Industries Ltd of Williamstown Road, Port Melbourne. Club members recall the machine being at the South Melbourne Rowing Club in the 1960s, and being transferred at a later date to the Albert Park Rowing Club. The machine has not been used since the founding of the amalgamated AP-SMRC and requires careful conservation. The ‘Moore’ rowing machine is of national research significance as a rare survivor, in Australia, of the well-regarded Kerns patent design that was popularised by Spalding in the northern hemisphere. The English River and Rowing Museum website quotes a testimonial from an AG Spalding & Bros’ Mail Order Catalogue: ‘This machine was described by ‘an experienced oarsman’ ... “to be the most perfect rowing machine ever produced”. A feature was the adjustment of the resistance so “the weaker sex can use the machine”’. Its historic significance lies in its rarity (and perhaps uniqueness) as an aid to the training of rowers at two successful clubs on Albert Park Lake. Additional historic significance lies in the connection that the rowing machine represents between local rowing clubs and a major local manufacturing engineer. The ‘Moore’ rowing machine bridges the realms of innovation and application, of industry and recreation, of land-based and aquatic sports, and of two neighbouring rowing clubs on the Albert Park Lake." 2014 Significance Assessment, p43"A rowing machine that appears to be built to the Kerns patent design from 1900 but may not be that old in construction or use. The machine is heavy and includes parts made from cast iron. The cast iron components are painted in a distinctive bright red. The wooden seat moves on timber slides. Resistance is created by spring mechanisms at the ends of two frame elements that connect with two wooden ‘oars’, and by the central chain-driven system that co-ordinates with the rower’s movements. The machine carries a maker’s plate with the single word ‘Moore’ in an oval design, using white letters against a navy background, fastened to the base board and close to the foot-rests." 2014 Significance Assessment, p38Moorerowing, apsm rowing club, significance assessment, malcolm moore industries ltd, kerns, 1900, sculling machine, albert park rowing club, south melbourne rowing club, albert park lake, rowing machine, ergo

This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.Table outlining the Dimensions of the Hume Weir and comparisons with MAKWAR and BURRINJUCK DAMS, and some other comparisons. MAKWAR Dam is located on the Blue Nile about five miles south of Sennar and 175 miles south of Khartoum in Sudan. The construction of this dam started in 1922 and was completed in May 1925, while the British Empire colonised Sudan. It was officially opened on 21st January 1926. The BURRINJUCK DAM is situated in the upper catchment of the Murrumbidgee River, approximately 60 kms from Yass, N.S.W. It was built from 1907 to 1927 The stated purpose of the Hume Reservoir is to get storage to ensure regulated output for:- 1. Irrigation 2. Navigation 3. Hydro-electric Generation.hume reservoir australia, river murray waters scheme, hume dimensions