This photograph was taken at the wreck site of the HMAS Warrnambool J202, wrecked on September 13th 1947. The bell was recovered in 1948 by the Royal Australian Navy. The ship's bell has been of great importance to a ship for hundreds of years. The bell is used for the timing of ships watches, for emergencies and many other purposes. It is also a prized possession when a ship is wrecked or broken up, as lasting memorial of the ship's existence. The HMAS Warrnambool J202 was commissioned by the Royal Australian Navy for use as a minesweeper during World War II. The Bathurst Class Corvette, fitted out with a range of armaments, was launched in Sydney 1941 and was. The ship began service in Bass Strait in 1941. At the end of the year it called into its namesake city, Warrnambool, where the crew paraded for the public marching eastwards along Timor Street. A gift of books for the ship’s personnel and a plaque bearing the City of Warrnambool’s Coat of Arms were presented to the ship. The ship was involved in evacuating a family of nine from the Dutch East Indies that was later successful in its challenge of Australia’s Immigration Restriction Act (White Australia Polity). The ship had many other appointments around Australia. On 13th September 1947 HMAS Warrnambool was leading a flotilla of minesweepers in northern Queensland’s coastal waters, clearing mines previously laid to defend Australia. The ship hit a mine, which exploded and very quickly sunk the ship. Boats from the nearby ships rescued most of the seamen although one was killed at the time. The survivors were taken by the HMAS Swan II to Darwin, and they went from there to hospitals in Brisbane and Sydney. Three of these men later died from their injuries. A number of items were recovered by Navy divers in 1948 including the ship’s bell and a plaque with Warrnambool’s Coat of Arms. In 1972-75 the wreck was sold and other items were salvaged. In 1995 a memorial plaque was erected in Warrnambool near the RSL. NOTE: The RAN built a second HMAS Warrnambool FCPB204, launched in 1981 and decommissioned in 2005. There was also a steam ship SS Warrnambool built in London 1892 and broken up in 1926. [A more detailed history can be found in our Collection Record 3477.] This photograph is significant for its association with the lifesaving rescue of the crew and the sinking Royal Australian Navy vessel, HMAS Warrnambool (J202). The HMAS Warrnambool played a nationally significant role in overturning Australia’s Immigration Restriction Act 1901 (colloquially known as the White Australia policy). The ship rescued, and brought to Australia, Samuel and Annie Jacob and their family after they evacuated Dutch East India. The family was threatened with deportation and made the first successful appeal to High Court regarding that Act. The HMAS Warrnambool has - Local significance for being the namesake of the City of Warrnambool - Local significance, having docked in Warrnambool Harbour - Local significance, the crew having paraded in Timor Street, Warrnambool - State significance for its first patrol being in Bass Strait. - National significance, being present in Timor at the Japanese surrender - National significance, shown by the significance of the ship’s bell being curated as Military Heritage and Technology at the Australian War Memorial. - National significance as part of Australia’s defence force history, being one of only four Bathurst class corvettes lost while in Australian service, the only Bathurst class corvette lost after World War II, the only RAN vessel to be sunk by a mine, and associated with the last four Navy deaths of WWII Photograph of ship bell from shipwreck of HMAS Warrnambool, sunk on 13-09-1947. The black and white photograph of the bell shows its inverted 'U' shaped fitting on top and inscribed letters around it. The flared base of the bell has concentric rings as decoration. In photograph, inscription on bell "- ARNAMB-" [WARRNAMBOOL]flagstaff hill, maritime village, maritime museum, warrnambool, shipwreck coast, mort's dock & engineering co ltd, h.m.a.s. warrnambool, hmas warrnambool, hmas warrnambool i, hmas warrnambool j202, hmas swan ii, j202, world war ii, bathurst class corvette, royal australian navy, ran, sydney built ship, bass strait patrol, sea mine patrol, mine sweeper, mine clearance, navy divers, great barrier reef, cockburn reef, southern cross diving and salvage, warrnambool city council, cr j r astbury, mayor j r astbury, warrnambool patriotic fund, seal, coat of arms, dedicatory plaque, hmas warrnambool 1941, shipwreck by sea mine 1947, sinking ship, sunk ship, sea rescue, life saving, lifesaving, hmas warrnambool ship’s bell, ship’s bell, minesweeper

This flexible measuring tape was used by the SEC Victoria in the mid to late 1900's. It was in a period before digital measuring instruments were in use. This is a 33ft long tape measure and would have been used by the construction workers when building the Kiewa Valley Hydro System. The warning details (embossed into the leather covering) was to warn users to be careful not to use the tape near live electricity terminals or linkages. This tape was produced mainly for wooden structures and not electricity conductive material. This was during the 1950's to 1960's.This imperial tape measure is very significant to the Kiewa Valley as it was used in the construction of the Kiewa Valley Hydro Scheme of the 1950's-1960's. It provides evidence that small measuring equipment used in the construction and the continuing maintenance of the scheme was of the imperial measure and used by construction workers who remained and settled in the town of Mount Beauty and Kiewa Valley long after the construction period. This flexible metallic measuring tape (33 ft in length) is contained in a round circular leather bound container. It has brass fittings (winder and tape guide) and is stitched with heavy grade twine. The tape measure is graduated in feet and inches on one side and yards on the other. Embossed in the leather casing"MADE IN ENGLAND" and around the inner circle "HOCKLEY ABBEY" and "JOHN RABONE & SONS"imperial tape measure, distance measures, imperial tools

The brass tap was recovered from the wreck of the Schomberg sailing ship. It is severed at the pipe end before the position where the join would have been. This could have happened after the shipwreck or at the time of salvage. ABOUT THE SCHOMBERG (October 6 to December 27, 1855)- When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Baine’s Black Ball Line had commissioned her for their fleet of passenger liners. The Aberdeen builders designed her to sail faster than the clippers designed the three-masted wooden clipper ship to be fast. The timber used for the diagonal planking was British oak with layers of Scottish larch. This luxury emigrant vessel was designed for superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first-class passengers. The master for Schomberg’s maiden voyage was Captain ‘Bully’ Forbes. He drunkenly predicted at her launch that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons of cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The poor winds slowed Schomberg’s sail across the equator. She was 78 days out of Liverpool when she ran aground on a sand spit near Peterborough, Victoria, on 27 December; the sand spit and currents were not marked on Forbes’s map. The ship’s Chief Officer spotted the coastal steamer SS Queen at dawn and sent a signal. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers safely disembarked. In 1975, 120 years after the Schomberg was wrecked, divers from Flagstaff Hill found an ornate communion set at the wreck site along with many other artefacts. In 1978 a diamond ring was discovered under the concretion in the lid of the communion set, which is currently on display. Former Director of Flagstaff Hill, Peter Ronald, had salvaged most of the artefacts from the wreck. This tap is significant as an example of an item in common use in the mid-19th century. The Schomberg collection as a whole is of historical and archaeological significance at a State level. Flagstaff Hill’s collection of artefacts from the Schomberg is also significant for its association with the Victorian Heritage Registered shipwreck (VHR S 612). The collection is of prime significance because of the relationship between the objects salvaged, as together they help us to interpret the story of the Schomberg. The collection as a whole is historically significant for representing aspects of Victoria's maritime history and its potential to interpret social and historical themes. Brass tap, flat horizontal handle, horn-shaped finish above the spout. The fixture has been severed at the pipe connection end. The surface has since been polished. There is a hole in the side of the pipe near the vertical fitting. It was recovered from the wreck of the Schomberg.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, schomberg, brass tap, plumbing fitting, water tap, tap

The Ballarat Junior Technical School was a division of the Ballarat School of Mines.Fourteen boys, wearing white aprons, are undertaking a practical class in turning and fitting at the Ballarat Junior Technical School. The boys work with foot pedaled and early electric lathes. The classroom has evidence of both gas and electric lighting. (the guitar shaped lamp is gas)ballarat junior technical school, ballarat school of mines, education, trade, fitting and turning

Copy of photo: staff of fitting and machining department, Bendigo TAFE College 1970. Back row : Ian Grenfell, Jack McPhail, Neil Botten, Brian Frewin, Keith Harris. Front row: Alex Reid, Terry Evans, Alan Thompson, Roger Booth.bendigo, institutions, tafe college, tafe, technical and further education, fitting and machining, 1970, bendigo

Uterine dilator, with a measurement dial and screw. The screw is at the top of handle and is used to activate the dilator. There is a number inscribed on the handle. There is a small metal attachment below the dial at an approximately 45 degree angle. The attachment has a flange, and in a fixture for fitting rubber tubing and a douche to the dilator.

This instrument was used by Dr Fritz Duras (1896-1965), who moved to Australia from Germany in 1937. As his father was Jewish, Duras was forced to leave Germany, and came to Australia to take up a post as director of physical education at Melbourne University. This instrument was part of a collection of instruments given to his son-in-law, Dr Michael Kloss, who was an obstetrician. Dr Kloss subsequently had it engraved and used it in his own practice, before donating the item to the College. Metal uterine catheter. Thin, curved instrument with two oval shaped fittings attached to the sides of the instrument at the proximal end for grip. There is a seam roughly halfway down the instrument indicating that the halves of the instrument can be separated. One side of the instrument is engraved with the word 'Kloss'.'Kloss'obstetrics

Standard type water bottle as issued to American and Australian troops in the Vietnam War.00095.1 Cloth , Canvas Water bottle cover with “FIX” stud fittings. Khaki, US Maker. 00095.2 Khaki Plastic Water Bottle Marked US 1966. 00095.3 Aluminium Dixee Cup, made by Stokes Melbourne Reg No 8465 - 66 - 058 - 5567

Hand operated pressure pump with water reservoir. High and low pressure hoses. Low pressure for filling reservoir, high pressure reinforced hose for delivering water to item to be pressurised. Brass fittings. Reservoir painted pale green and operating handle yellow & red.

Made by Duncan and Fraser for fitting to horse-drawn tramcars and possibly other products of their Adelaide workshops. See 565 and 8744 for other examples.Demonstrates Duncan and Fraser's workshop practice of putting their name on some fittings.Duncan and Fraser, Adelaide SA window lifter or bracket to enable a horse tram window to be lifted in the window frame. Cast brass, about 40mm in diameter with a right angle lug to enable a person to lift the window. Words "Duncan & Fraser" cast around the outside of the device and the words "Adelaide S.A." cast into the centre. Has been drilled with three countersunk holes. Has brown paint on the lifting portion. On the rear, possibly the letters "5L", scratched into the metal. If this is the case, could have indicated the fifth left hand window as an identification of location. Given to the BTM 1995 by Doug Prosser, of the TMSV, said to be from Ballarat Horse Tram No. 1 horse trams, duncan & fraser, window furniture, tramcar component, tramcars, tramways

Trench art desk set consisting of a wooden base with two inkwells, a pen rest and an ornate carrying handle. The two inkwells have been made from fuse fittings removed from 18 pounder artillery projectiles. The fittings have been modified to enable the tip to hinge open revealing an ink well. The bottom of the wells has been sealed by inserting coins, one well has a British halfpenny coin and the other has a French five centimes coin. The item is of World War 1 origin and has a small shield attached with the inscription "FRANCE 1916-7 BELGIUM"There is a shield with the inscription "FRANCE 1916-7 BELGIUM".

The domestic sewing box would have been used in the home.A brown varnished rectangular wooden lidded Sewing Box with a lift out top section which has 16 varying sized compartments for storing sewing accessories. There is a has a hollow area underneath the tray. The lid is attached with brass hinges and it has a brass lock and small key. There are several sewing items included - cotton reels and thread, assorted darning thread for hosiery, wool and nylon threads, a box of black pins, assorted sewing needles, thimbles, small decorative sewing scissors, black rolled tape, mixed buttons, hooks and eyes, nickel plated fittings for hats, vintage stocking hooks, a stick of white chalk, two (one green and one ivory) antique cotton thread winders and a medium sized vintage safety pin.a Variety of brands of items include - 'Rite Tone', 'Della Darn' 'C No Darn', 'Clark's Filosheen' hosiery thread, 'Barbour's Linen Wax Thread', 'The Flora MacDonald Best Steel Bodkins' 'National Hat Guard' nickel plated steel and brass fittings, 'Chadwick's Wool and Nylon' reinforcing mending thread, 'The Myrene Snap Studio' size 1 rustless press studs, 'The Pagoda Brand' rolled tape 5 yds, 'Cross Fox Brand' Best quality Steel Stems (long plastic headed pins), 'Toledo' brass thimble and a black box of 'F. Tayler & Co's Solid Headed Mixed Pins'. The brass lock has 'SECURE PATENT' stamped in to it on the inside of the edge of the front of the box. there is also a small VR with a tiny rounded pattern opposite the Patent sign. sewing equipment, sewing box, sewing, embroidery scissors, functional object

This is a very common 'farm' style of old swinglebar. Blacksmiths and agricultural machinery suppliers made them by the thousands. They were used most commonly on heavy vehicles pulled by horses. This one would have been used on a farming property on the Orbost district.This item is an example of an early farming implement used in the Orbost district. It also demonstrates the improvisation skills of the agricultural community.Four pieces of wood connected by iron fittings. Two pieces have iron loops at both ends. The two straight pieces appear to be newer. There are two swingle trees. It appears to be a 2-horse set of swinglebars with a double-bar. which has been added to and repaired.agricultural-implement horses farming swinglebar

Part of the Kevin John Herdman Collection. See Catalogue No. 5951 for details of his service record.PAir of klhaki coloured shoulder boards. Each board has three gold coloured metal pips. Pin holes for missing corps badge on the square end of each board. Pips signify the rank of Captain. On the back of each board are two loops for fitting to an epaulette.uniform, shoulder board, captain, kevin john herdman

These medical / hospital instruments were used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment.The syringe holds 10cc Used to administer liquid drugs. Glass hollow cylinder with needle end steel and with fitting to attach needle. Glass plunger, hollow with wider solid top which prevents the plunger going into the hollow cylinder too far. Glass cylinders frosted.Hollow cylinder has markings for quantity of fluid (up to 10cc) On the other side "TOP / Reg. Trade Mark / Interchangeable" The plunger has no markings.hospital equipment. medical equipment. syringe. tawonga. mt beauty. leurlock.

Field clinometer MK VI used in conjunction with the QF 25 PDR field gun. This device was mounted on a fitting at the breech end of the gun barrel and used to accurately indicate the elevation of the gun barrel. The device is calibrated in degrees and minutes and is adjustable enabling the weapon to be accurately aimed.ww2, 25 pdr, qf 25 pdr, 25 pounder, field gun, clinometer, field clinometer mkvi, field clinometer, clinometer mkvi

Model of the Era. Oil tanker built by Samsung Ship Building and Heavy Industries Company in South Korea. Completed January 1987. 1985 officially under ownership of Howard Smith Industries Pty Ltd, Melbourne with take over of R W Miller. 1996 transferred to Intercontinental Ship Management. Scrapping began at Alang January 2002. 54 880 gross tons Length overall: 229.732 m (758 ft) Beam (MLD): 46 m (151 ft) Depth (MLD): 19.2m (46 ft) Draught (design): 12.17 m Draught (Scantl): 13.6 mShip builder's model of the tanker Era IMO 8420218 built by Samsung Shipbuilding & Heavy Industries Co. - Moulded polyurethane hull painted in colours of black and maroon, the deck with detailed fittings, machinery and superstructure, presented within a perspex display case. Scale 1:200plaque at foot of model: "95,000 DWT CRUDE/ PRODUCT CARRIER/ PRINCIPAL DIMENSIONS/ LENGTH O.A 229.732M/ LENGTH B.P 220.000M/ Breadth (MLD.) 46.000M/ DEPTH (MLD.) 19.200 m/ DRAUGHT (DESIGN) 12.170 M/ DRAUGHT (SCANTL.) 13.600 M/ SHI SAMSUNG SHIPBUILDING &/ HEAVY INDUSTRIES CO., LTD./ SCALE OF MODEL 1:200" White pen written on base: "PWO 2666.4/ 110/97/S4" Label affixed to base: "104226" on model "ERA MELBOURNE/TUG/TUG/TUG/NO SMOKING/NO SMOKING/ ERA"

This sewing machine was bought by Alex Craig's dad in 1942 for his wife whom he married in 1943. Alex's grandmother used it in 1942. It still works (2013).Historical: Type of sewing machine used by S.E.C.V. wives living in Mt Beauty during the 1940's, 1950's and 1960's. Ladies made the family's clothes and sewed for the Annual Church and School fetes. eg. children's clothes and dolls' clothes. They bought dozens of dolls and made 'fairy' dresses for them using coloured netting.Singer sewing machine - brown wood lid & base. Handle on top of inside of lid as is the wooden bench that clips on to the side of the machine and also the steel knee lever that fits into the front of the machine. Black steel machine with silver fittings. Brown and white electric cord plugged in. "Singer" on front centre of lid. On machine - "Singer" above light. "The Singer manufacturing Co. / Manufactured in Great Britain" top of machine. "Singer" on front side of machine. Front - Gold plate - "The Singer Manfg. Co. / Trade Mark." Decoration on machine base and silver end.singer manufacturing co.. sewing. fetes. clothes. domestic.

Black & White 16.5 cmx10.5cm photograph. Young woman head & neck, Bardwells Studio Royal Arcade Melbourne printed on front. Embroidered dress top with close fitting neck collar. Two brooches at neck. Vertical row of small buttons fastening dress top.Bardwells Studio, Royal Arcade Melbournephotograph, person, female

A black and white photograph of the 1st australian Task Forece Commander (Aug 1969 - Jun 1970) Brigadier Stewart Weir MC, inspects a bridge built by 17 Construction Squadron over a creek northwest of the province capital Baria. The Engineers are fitting screens to protect the foundations.photograph, brig stewart weir, 1st atf base, baria, gibbons collection catalogue, 17th construction squadron, engineers, military cross

From the collection of Betty McPheeBrown bakelite self-filling fountain pen with lid It has a metal and bakelite nib. At the end of the barrel is a knurl screw fitting to enable self-filling. It has a pale brown trim one centimetre from the edge of the lid. Very fine engraved inscription on barrelOnoto Patent self filling pen De La Rue Londondomestic items, writing equipment

Colour photograph of the Ballarat Horse Tram No.1 prior to the fitting of handrails and the completion of the painting of the steps, front and rear panels and lettering of the tramcar. Alastair Reither sitting on the top deck. Photographed outside the rear of the depot by Carolyn Dean on 15/3/1992. On Fujichrome paper.In top left hand corner of print on rear "165.6 15.3.92 / Carolyn Dean / Photo"horse trams, reconstruction, depot, btps, tram 1

Laminated newspaper article - Bendigo Advertiser Friday November 27, 1987. "Bendigo's Upper Court is the jewel. Within the Bendigo Court House, the upper court is used for both Supreme and County Court sittings. Detailed description of the fittings, purpose and use of the upper court room. newspaper, bendigo's historic buildings, bendigo law courts

A mass-produced brass marine or ship's fitting made for water drainage from a ship's deck or elsewhere on a marine vessel or for covering a ventilation hole. The brass marine fitting is significant as an example of equipment or furnishing used on a marine vessel in colonial times that is still made in modern times. Brass marine drainage cover, circular; Perforated convex cover with eight drilled screw holes around its wide collar. warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, ventilator cover, ventilator, drain cover, drain, marine fitting, ship's fitting, perforated brass cover