This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

Pipe smoking has been in vogue for centuries, and in Australia it was a symbol of the "discerning smoker" such as the landed gentry or men of professional status. This pipe, of the cherrywood style, would have suited the young professional of the mid and late 1900s. It is the type of pipe well suited to the rural backdrop. In the late 1900s, with the health related restrictions placed on public smoking these tobacco pipes were not immune from the legislation, and even though the pipe smoke was not as offensive as cigarette smoke it still came under the umbrella of smoking. Pipes were also used in the process of inhaling illicit drugs i.e. marijuana, but this use was limited to a very few. Smoking in the second millennium is being phased out as a social habit in Australia but may affect the few "private" smoker and has, as the United States prohibition era (alcoholic drinks) did, spawn an illicit trade in cheap contraband tobacco.This type of pipe lends itself well to the rural setting of the Kiewa Valley and although it is a bit bulky in shape its wooden barrel blends into the environment. The Kiewa Valley region was up until the late 1900s part of the Australian Tobacco Industry and the levels of men smoking pipes was enhanced by the readily supply of, "off the fields", tobacco leaves.This pipe has a bent stem and its style is cherrywood. The pipe has a permanent filter and a narrow tin band. The bowl is well pronounced (curved both top and bottom). The stem screws into the bowl , mid way up the bowl (similar to KVHS 0424 and KVHS.0425) and the stem is also made from bakelite (dark brown in colour). tobacco, pipe smoking, smoking accessories

Pipe smoking has been in vogue for centuries, and in Australia it was a symbol of the "discerning smoker" such as the landed gentry, men of professional status or student. This pipe, however,of the "corncob" style, would have suited the younger professional or student/undergraduate(male or female) of the mid and late 1900s because it was relatively inexpensive to purchase and was regarded as a "beginners pipe". It is the type of pipe well suited to the rural backdrop. In the late 1900s, with the health related restrictions placed on public smoking these tobacco pipes were not immune from the legislation, and even though the pipe smoke was not as offensive as cigarette smoke it still came under the umbrella of smoking. Pipes were also used in the process of inhaling illicit drugs i.e. marijuana, but this use was limited to a very few. Smoking in the second millennium is being phased out as a social habit in Australia but may affect the few "private" smoker and has, as the United States prohibition era (alcoholic drinks) did, spawn an illicit trade in cheap contraband tobacco.This type of pipe lends itself well to the rural setting of the Kiewa Valley and although it is a bit rough in appearance its corncob barrel blended into the environment. The Kiewa Valley region was up until the late 1900s part of the Australian Tobacco Industry and the levels of men smoking pipes was enhanced by the ready supply, "off the fields", of tobacco leaves and the attitude to city based smoking restrictions was one of resentment.This pipe has a straight stem and its "style" is corncob. Originally made from corn cobs the pipe was light in weight and easy to hold in the mouth. The pipe has a permanent filter and a black coloured tin band at the stem/shank junction. The stem fits into the wooden shank which is fastened into the bowl. The stem is made from clear plastic (orange in colour). This stem is longer(70mm) than the shank(45mm). Both are horizontal and extrude 7mm from the bottom of the bowl.tobacco, pipe smoking, smoking accessories

non-fiction"Autobiography of the first person to be declared by a final court judgment to be of non-binary sex. Perhaps TMI, a few extraordinary ups and downs, more than a few ordinary ups and downs, and the odd bit of hippy cosmology and amazingly effective amateur lawyering. Begins with the tale of when I was a boy, which wasn't very often..." -- Back cover.non-binary, autobiography, transgender

This bolster sham is one of several linen and clothing items that were made and belonged to Mrs. Eliza Towns and donated to Flagstaff Hill Maritime Museum and Village. Eliza was born Eliza Gould in 1857 in South Melbourne (Emerald Hill) and in 1879 married Charles Towns. In the early 1880's they moved to Nhill in western Victoria and remained there for the rest of their married life. Charles was a jeweller and later became an accountant and for many years was involved with the Shire Council, the local show committee (A & P Society), the Hospital Committee and the Board of the local newspaper (the Nhill Free Press). They had three children and lived a life that would be regarded as comfortably "middle class". Eliza probably had a treadle sewing machine and would have made many of her own clothes and household linens - adding her own handmade embroidered or crocheted decorative trim. Most beds during the late 19th and early 20th century had a feather, hair or spring mattress covered by a blanket and topped with an under sheet, an upper sheet, several blankets and a bedspread. A flat bolster could be placed either under the pillows or on top of the pillows with a decorative sham. Washing pillows and quilts by hand would have been a very onerous task (involving heating water and handwashing in a tub or using a copper) and so it became the practise of many housewives to cover the pillows and bolsters with an outer slip (or sham) of washable material which could be easily removed and washed when needed. If the bolster was kept under the pillows it wouldn't need to be very decorative but many shams or slips that were "on show" were often highly decorated with embroidery, pintucks, ribbons or lace. This bolster sham is machine made and quite plain with the exception of some pintucking and eyelet lace on each end which suggests that it would mostly be hidden under the top pillows with just the decorative edges on display.This item is an example of the needlework skills of women in the early 20th century - combining machine stitching with hand embroidery to personalise and embellish a practical domestic object. It is also significant as an example of an early 20th century innovation that helped make the working lives of housewives a little bit easier.A long white cotton rectangular bolster sham, machine sewn, with seven ties and two buttons (plus one missing button) to enable it to be folded over lengthwise and closed. It has two pull string ties near each end to enclose a bolster and is finished with a decorative edge of pintucks and handmade eyelet lace and embroidery.flagstaff hill maritime museum and village, eliza towns, sham, bedding, great ocean road, shipwreck coast, warrnambool, household textiles, sewing, bolster sham, housework, pillow sham, charles towns, nhill, haberdashery, needlework, manchester, handmade, household linen

Willcox and Gibbs: Serial No. 158679. The Willcox & Gibbs Sewing Machine Company was founded in 1857 by James E. A. Gibbs and James Willcox and opened its London Office in 1859 at 135 Regent Street . By 1871 the Company's Chief Office for Europe was at 150 Cheapside, London, this office was later moved (post 1885) to 94 - 96 Wigmore Street, then 37 & 39 Moorgate Street (by 1891 to post 1907) and later 20 Fore Street, London . Right from the initial production the manufacturing of the Company's single thread, chain stitch machine was undertaken by Brown & Sharpe, Rhode Island and this continued up until 1948. A special hand crank mechanism was produced in England for the European market, but the general design of the Willcox & Gibbs remained essentially the same throughout its production. The only major improvement was in 1875 when the glass tension discs were replaced with an automatic tension device which ensured the machine could not get out of adjustment. In addition to the domestic hand and treadle machines the company produced a wide range of industrial models. The Company finally closed in 1973. This Willcox & Gibbs came complete with its wooden carry case. The machine was made in America in the late 1860's but it has the ornate hand crank produced at Coalbrookdale near Telford, England which was, in Victorian times, renown for producing high quality ornate iron castings. This machine has the glass tension discs which were used on domestic models until 1875. The Willcox & Gibbs badge is located on the rear of the base casting and it also has a deep wooden base. The cloth plate has various American patent dates, four dating between 1857 & 1860 relating to J. E. A. Gibbs, three dating between 1860 & 1864 relating to Chas H. Willcox (son of James Willcox), the machine was also licensed under five other patents including the infamous Elias Howe patent of 1846. There are only two English patents one for J. E. A Gibbs and the other for James Willcox. In 1887 a W & G Sewing Machine sold in England for 6 pounds , with its box and bits, at a time when the average wage was less than 10/- shillings per week. The early settlers of Moorabbin Shire had to be self sufficient making their own clothes, tableware, bed coverings, furnishings and equipment. The women were skilled dressmakers and craft workers.Willcox and Gibbs: Serial No. 158679. A single thread, chain stitch Sewing Machine with a special hand crank mechanism produced in England for the European market, and the glass tension discs which were used on domestic models until 1875. This Willcox & Gibbs came complete with its wooden carry case. The machine was made in America c1870 but it has the ornate hand crank produced at Coalbrookdale near Telford, England which was, in Victorian times, renown for producing high quality ornate iron castings. This machine has the glass tension discs which were used on domestic models until 1875. The Willcox & Gibbs badge is located on the rear of the base casting and it also has a deep wooden base. The Willcox & Gibbs badge is located on the rear of the base castingsewing machines, early settlers, pioneers, moorabbin, brighton, gibbs james, willcox james, willcox henry, new york, america, dressmaking, mateial, machine makers, wrought iron work, telford england

B.I.T. Papers Summer 1970-71, articles by various contributors, contents include, Building the Melbourne-Bendigo Railway, Engineering in Colonial Times, Source-Bordering Sand Dunes along the Loddon River & others, 66 pages with black and white photographs and maps..history, australian

8419.1 - Overall ovoid, though flattened, piece of high-grade black coal

A 'Bendigo Advertiser' article with the heading ' B.I.T. and State College Will Be Merged. ' Mr. McClure State Member for Bendigo released the news about the merger and the site of the building proposed for teacher education. The decision was greeted with contrasting dismay, excitement and resignation. Mr. K.G. Scarrott, the Principal of Bendigo Teachers' College said the Australian Universities Commission recommended the merger in their report. Also attached to this article is a small photo of Mr. Ralph Birrell the Principal of Bendigo Institute of Technology. Friday, April 5, 1974.bendigo, education, bit and btc merger, la trobe university bendigo collection, collection, bendigo, bendige teachers' college, bendigo institute of technology, mr. ralph winter birrell, mr. k.g. scarrott, merger, amalgamation, education, tertiary, photo, photograph

A Bendigo ' Advertiser ' article titled ' Planner for Merger of Colleges. ' A master planner is needed to plot the merger of the Bendigo Institute of Technology and the State College. Mr. R. says it is needed as soon as possible. It is hoped it will be called the Northern College of Advanced Education. 1-6-1974.bendigo, education, bit and btc merger, la trobe university bendigo collection, collection, bendigo, tertiary education, bendigo teachers' college, state college, bendigo institute of technology, mr. r. birrell, northern college of advanced education, merger, amalgamation

A Bendigo 'Advertiser' article stating that the 'Merger plan's not a good idea'. Mr. D. M. McDonnell claims the merging of teaching colleges with polytechnic institutions would cause too many difficulties. 7-12-1974.bendigo, education, bit and btc merger, la trobe university bendigo collection, collection, bendigo teachers' college, mr. d. m. mcdonnell, state college bendigo, bendigo institute of technology, education, tertiary, mr. k. g. scarrott, merger

A Bendigo 'Advertiser' article titled 'State College head slates the City Council'. This sentiment was expressed by the Principal of the State College of Victoria (Bendigo) Mr. K. G. Scarrott, in a letter to the Bendigo City Council. 22/1/74.bendigo, education, bit and btc merger, la trobe university bendigo collection, collection, bendigo, education, tertiary education, merger, bendigo teachers' college, mr. k. g. scarrott, amalgamation, la trobe university bendigo, state college of victoria bendigo

A newspaper article titled 'They want word on the merger'. Pressure is being put on the Minister of Education Mr. Lindsay Thompson to announce the merger of State College of Victoria Bendigo and Bendigo Institute of Technology. 4/5/74.bendigo, education, bit and btc merger, la trobe university bendigo collection, collection, bendigo, education, tertiary education, state college of victoria bendigo, bendigo institute of technology, mr. lindsay thompson, merger

A Bendigo 'Advertiser' article titled 'State oks colleges merger'. The State Government has confirmed the merger of the State College of Victoria Bendigo and the Bendigo Institute of Technology. The Australian Universities Commission report recommended the merger of the two colleges. Mr. Lindsay Thompson the Minister for Education has adopted the amalgamation recommendation in principle. 7/4/74bendigo, education, bit and btc merger, la trobe university bendigo collection, collection, bendigo, education, tertiary education, bendigo teachers' college, state college of victoria bendigo, bendigo institute of technology, merger, mr. lindsay thompson, australian universities commission

The author joined the Australian Regular Army in 1966. After initial ten weeks recruit training at Kapooka, went to Infantry centre, Bardia Barracks at Ingleburn to complete ten weeks of Corps Trainingvietnam war, 1961-1975 - poetry, war poetry - australian

The author joined the Australian Regular Army in 1966. After initial ten weeks recruit training at Kapooka, went to Infantry centre, Bardia Barracks at Ingleburn to complete ten weeks of Corps Trainingvietnam war, 1961-1975 - poetry, war poetry - australian

This attachment was used in Adelaide by Dr R. Humphrey Marten (1860-1933). He was an English general practitioner who graduated from University College Hospital in 1883. He came to Australia as custodian of a mentally deranged patient. Martins fee allowed him to later return to England and obtain a degree from Cambridge. In 1888 he returned to Adelaide and became a very successful physician and surgeon, said to be the first surgeon in South Australian to have removed a brain tumor in 1901. The brace was later used by Sir Leonard Lindon (1896- 1978) one of the eight founders of the Neurosurgical Society of Australasia, who had married Marten's daughter.Having been used by two important figures in surgery during the 20th century this item is an excellent representation of the brace described by Eugene Doyen (1859-1916) of Paris in 1896. It is used in conjunction with a perforator, spherical burrs and an electric saw.small tapered attachment for Doyen Bracedoyen, brace, lindon, marten, surgery, centering bit, neurosurgery.

Used by a working horse in the Great War - WW1 .Iron bar between two iron loops, chain links forming short chain extending from one loop to another.transport, horse, ww1

Long steel rod twisted into a corkscrew shape at one end and a round hole at the other. A rod is inserted into the round hole and is turned to drill a hole in a fence post.rural industry, fencing

Long steel shaft half of which is twisted into a corkscrew shape and sharpened to make a hole in wood. The other end has been formed into a round hole so that a handle may be inserted to turn the drill. Used for drilling hole in fence post.rural industry, fencing

Thick metal shaft with wide corkscrew ending in a point at one end. Top end has a handle with large hole in centre.trades, carpentry

Thick metal shaft with a wide corkscrew ending in a point at one end. Top end has handle with a large hole in centre.trades, carpentry

Thick metal shaft with wide corkscrew ending in a point at one end. Top end has a handle with a large hole in centre.trades, carpentry

Thick metal shaft with wide corkscrew ending in a point at one end. Top end has handle with a large hole in centre.trades, carpentry