A Chemold Rod Laver Professional Model tennis racquet, with ribbon whipping around shoulders and shaft, and leather grip with lozenge perforations. Model name features across base of head and throat, accompanied by an 8-pointed star device. Chemold logo features along shaft. Chemold trademark with large 'C' features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis

A Chemold Rod Laver Sovereign tennis racquet, with ribbon whipping around shoulders, and leather grip featuring quatrefoil perforations. Chemold logo features across base of head. Model name features across throat and shaft, accompanied by a mounted fleur-de-lis device. Chemold trademark with large 'C' features on lower shaft and black butt cap. Materials: Wood, Nylon, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tape, Ribbontennis

A Chemold Rod Laver Sovereign tennis racquet, with ribbon whipping around shoulders, and leather grip featuring quatrefoil perforations. Chemold logo features across base of head. Model name features across throat and shaft, accompanied by a mounted fleur-de-lis device. Chemold trademark with large 'C' features on lower shaft and black butt cap. Materials: Wood, Nylon, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tape, Ribbontennis

A Rawlings, John Newcombe tennis racquet, with cross-laminations from shoulders to handle, and leather handle grip with X-formation perforations. Rawlings logo features across base of head. Model name features across throat, in between two red, white and blue arrow devices. Red, white and black cursive 'R' trademark features on lower shaft and in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Adhesive tape, Leathertennis

A Seamco Ken Rosewall Professional tennis racquet, with string whipping around shoulders and shaft, and, leather handle grip with X-formation perforations. Seamco logo features across base of head. Shield device with 'R' in centre features on throat. Model name features along the shaft. Seamco trademark symbol features on lower shaft and plastic butt cap (along with logo). Materials: Wood, Nylon, Leather, Plastic, Ink, Adhesive tape, Glue, Lacquer, Metal, Enamel, Stringtennis

A Dunlop, Rod Laver, Grand Slam tennis racquet, with ribbon whipping around shoulders, which are enamel painted along with throat and shaft. Model name features along throat and shaft, accompanied by decal images of the flags of U.S.A., Great Britain, Australia, and France. 'D' trademark in arrowhead device, above Dunlop logo, features across base of the shaft. Materials: Wood, Nylon, Ribbon, Ink, Leather, Glue, Lacquer, Metal, Enamel, Adhesive tape, Stringtennis

A Dunlop Speed throat tennis racquet, with open throat/split shaft, ribbon whipping around shoulders and lower shaft, and leather handle with X-formation perforations. Dunlop logo features across base of head. Model name features on lower shaft. 'D' trademark in arrowhead device also features on lower shaft and white plastic butt cap. Materials: Wood, Plastic, Ink, Leather, Glue, Lacquer, Metal, Adhesive tape, Enamel, Nylon, Ribbontennis

A Wilson, Jack Kramer, Kramer Cup tennis racquet. Base of head features Wilson logo. Throat features rendered gold trophy cup device. Shaft features decal head and neck illustration of Kramer. Shaft and butt cap feature 'W' trademark. Leather handle grip features triangle-pattered perforations. Autograph by Kramer features along shaft on reverse. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Plastic, Paint, Ribbon, Adhesive tape, Stringtennis

A Wilson Famous Player Series, Tony Trabert Victory tennis racquet. Base of head on obverse features Wilson logo. Throat featuresmodel name beneath a crowned shield device, with a 'V' in the centre. Shaft features a decal head and shoulders photo image of a young Trabert. Leather handle grip features quatrefoil perforations. Inscription along right side of shaft: ENDORSED BY/THE NATIONAL CHAMPION. Materials: Wood, Nylon, Leather, Ribbon, Glue, Metal, Lacquer, Cloth, Painttennis

A Wilson Stan Smith Autograph tennis racquet. Base of head features Wilson logo, flanked by two pairs of brown diamond devices. Throat features model name, with a black and red silhouette of Smith in action. Lower shaft and butt cap feature 'W' trademark. Racquet features Wilson brand leather handle grip. Autograph by Smith across throat on reverse. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastic, Fibreglasstennis

A Wilson Stan Smith Monterey tennis racquet. Base of head features Wilson logo. Throat and shaft feature model name and gold and white shield device with 'S' at centre. Lower shaft and butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Butt cap has metallic plate adhered to it, engraved with the name 'JOE'. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Ribbon, Plastictennis

A Regent, Don Budge Top Star tennis racquet. Regent logo features across the base of the head and on plastic butt cap. Model name features on the throat, accompanied by a cloaked shield device. Decal head image of Budge features on lower shaft. Endorsement and model details feature on the left side of the shaft. Leather handle grip ifeatures linear perforations. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Paint, Leather, Ribbon, Ink, Plastictennis

A Bancroft Winner tennis racquet, with bamboo laminated frame, ribbon whipping around shoulders, and leather handle with triangle-patterned perforations. Bancroft logo features across base of head. Throat features model name, with wreath device. Wreathed 'B' trademark on lower shaft, and red 'B' trademark on butt cap. A furry lady bug sticker is adhered to shaft on obverse. Materials: Wood, Nylon, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Bambootennis

An unstrung Bancroft Executive tennis racquet, with bamboo and fibreglass laminates, ribbon whipping around shoulders, and leather handle grip with X-formation perforations. Bancroft logo features across base of head. Throat features model name within a wreath device. Wreathed black 'B' trademark features on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Bamboo, Fibreglass, Hidetennis

A Bancroft Executive tennis racquet, with bamboo and fibreglass laminates, ribbon whipping around shoulders, and leather handle grip with X-formation perforations. Bancroft logo features across base of head. Throat features model name within a wreath device. Wreathed black 'B' trademark features on lower shaft, and red 'B' trademark on butt cap. Materials: Wood, Leather, Glue, Lacquer, Metal, Ink, Plastic, Paint, Ribbon, Adhesive tape, Bamboo, Fibreglass, Nylon, Hidetennis

Block puzzle set. Contains 35 wood blocks covered with printed paper that can be arranged to make 6 different scenes. Housed in custom wooden box with hinge lid. Hinge is cloth tape. Box also contains five picture guide cards (sixth picture guide appears on box lid). Complete set. Small swinging metal hook as box closure device. Materials: Cardboard, Paper, Ink, Wood, Glue, Cloth tape, Metaltennis

This flare pictured is one of three lighting or signal flares. These are pyrotechnic devices used at sea, mainly as a distress signal. However, they have other meanings when used for naval purposes, such as the executive order to start a particular manoeuvre. These are usually packaged as part of a distress pack containing all necessary rockets or flares for immediate use, in any emergency, by ships and off-shore yachts. The inscribed numbers could possibly be the date packaged or the date of useful life i.e. 27-11-1955.This set of three flares is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Flare (three), ; metal base, black cylinder, removeable wooden end cap that has a wooden key attached by string at centre. Inscribed "R↑L" on the cap and metal base. Inscribed: "R↑L", "27, 11, 55", "Long Lights"flagstaff hill maritime museum and village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, lady bay, warrnambool harbour, port of warrnambool, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, rocket crew, lifeboat men, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, maritime accidents, shipwreck victim, rocket equipment, marine technology, rescue boat, lifeboat, life saving rescue crew, lifesaving rescue crew, rocket rescue method, rocket apparatus rescue, stranded vessel, mortar, life jacket, rocket machine, rocket line, rocket set, schermuly, harbour board, government of victoria, harbour master, armband, l.s.r.c., lsrc, flare, light, safety equipment, distress signal, safety at sea, emergency signal, broad arrow, communication signal, vingage, pyrotechnic flare

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This handmade tool was made for the particular purpose of joining sheets of metal together. The metal formed in this way could be used for water tanks, boilers and other similar items. It is an example of the equipment made and used in the trades of a metalsmith and blacksmith in the 19th and early 20th centuries.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

The Dräeger Pulmotor was developed in 1907. It addressed previous concerns about lung injury, by limiting both the inspiratory and expiratory pressures. Although still controversial, the Pulmotor was widely distributed and commercially successful. Oxygen from cylinders provided both the inspiratory gas flow and the driving mechanism. Expiration was an active process and gases were sucked from the lungs by negative pressure created by a Venturi effect. This device came with a facemask and harness, with a caution that the operator should take care to prevent air entering the stomach.Draeger resuscitation kit, inside wooden case with handle. Case contains small heavy gas cylinder with large beige handwritten 'S. M E' inscription on one side. Due to water damage case missing pieces of plywood in corner and floor of case bubbled and swollen.|Rubber decomposed rigidinspiratory, expiratory, pulmotor, negative pressure

Worldwide, more than 100 million lambs are castrated, and their tails are docked each year. Numnuts is a technological innovation to improve animal welfare. It combines traditions with innovation. In the mid-1990s it was scientifically shown that the immense pain felt during castration and tail docking could be significantly reduced with the use of anaesthetic. For the next 15 years, the industry said the cost the welfare devices and development were too high. But todays ethical consumer has demanded that sheep have no more pain. Initiated in Glasgow in 2009, Numnuts took nearly a decade to develop. Here you can see five stages of development, from an early prototype to the Numnuts device farmers use today. Each phase of development took years of on-farm trails to achieve the final product. Today there is even NumOcaine, an approved local anaesthetic used by Numnuts. Using the simple elastrator ring and adding an anaesthetic injector, Numnuts delivers pain relief during tail docking and castration. In the world’s first rubber ring applicator with a pain relief delivery mechanism. Through innovation and consumer pressure the wool industry is going through a moment of rapid change.Four prototype numnuts tools made from white plastic and stainless steel, each in varying stages of production. FInalised version made with black, orange and clear plastics.8097.2 - Mk4 8097.3 - Numnuts Tool V7; 20 10 0 8097.4 - On label - Numnuts NumOcaine 100ml 65 proceeduressheep, tools, castration, innovation, docking

Worldwide, more than 100 million lambs are castrated, and their tails are docked each year. Numnuts is a technological innovation to improve animal welfare. It combines traditions with innovation. In the mid-1990s it was scientifically shown that the immense pain felt during castration and tail docking could be significantly reduced with the use of anaesthetic. For the next 15 years, the industry said the cost the welfare devices and development were too high. But todays ethical consumer has demanded that sheep have no more pain. Initiated in Glasgow in 2009, Numnuts took nearly a decade to develop. Here you can see five stages of development, from an early prototype to the Numnuts device farmers use today. Each phase of development took years of on-farm trails to achieve the final product. Today there is even NumOcaine, an approved local anaesthetic used by Numnuts. Using the simple elastrator ring and adding an anaesthetic injector, Numnuts delivers pain relief during tail docking and castration. In the world’s first rubber ring applicator with a pain relief delivery mechanism. Through innovation and consumer pressure the wool industry is going through a moment of rapid change.8098.1 - Numnuts tool made with stainless steel and black, orange and grey plastic. 8098.2 - Glass bottle with orange and grey plastic nozzle containing water for injection. 8098.3 - Yellow plastic case containing 12 stainless steel needles 8098.4 - 10 green plastic elastrator rings 8098.5 - Product cardboard box with the product image on the front8097.2 - on label - For animal treatment only WATER FOR INJECTION 100mL 8097.3 - On case - numnuts 12x Veterinary Hypodermic Needles On needdles - 18G 8097.5 - Numnuts targeted pain relief for tail docking and castrationnumnuts, tools, sheep, castration, docking

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

This collar holder would have been used in the early to mid 20th century in the days when men's shirts often had detachable collars so that the collars could be changed each day and the shirt part would not have to be washed so frequently. The metal crest on the holder with a crown on top suggests that the wearer of the detachable collars could have held a Government office or been a member of one of the Defence Forces. This collar holder has no known local provenance but is kept as a memento of the days (80 to 100 years ago and more) when men wore shirts with detachable collars. This is a rectangular-shaped leather object which has been folded over once to form a wallet with an extra piece at the end to close over the wallet. The top piece closing device has two metal press studs. The insides of the wallet are lined with buff-coloured material hemmed with cotton stitching with two extra pieces folding over to hold the collars. The wallet contains one white collar with one collar stud. On the front of the wallet is gold-coloured printing and attached is a metal badge or crest. 'Soft Collars'men's vintage clothing, warrnambool, collar

This is a WW1 stand for mounting a .303 rifle, to train soldiers in shooting.This device consists of two parts; 1. Top part has an adjustable 'arm' . At the end of each arm is a leather covered 'U' section. Under the arm is a large threaded rod and knurled knob, this is to adjust elevation. At the center of the arm is a pivot that can lock into position. This top section is mounted on a tripod, it can be removed. 2. This is a steel tripod made out of 'T' section steel. There are fixed cross braces about 40 cm fom bottom. The top has a tube section within which the upper arm mounts.Marked on one leg is "XXI". Believed to be from 21st Bn. AIF. on the top of that leg is a very small arrow head.ww1, training, .303 rifles

These ties were made as merchandise for the University of Ballarat in the early 2000s..1) & .3) A cream box with University of Ballarat and the Emblem printed in red. Inside is a polyester black tie woven with a small diagonal band of three stripes (top is blue, middle is gold and bottom is red) and a small emblem of the University of Ballarat on the right side. It has a navy blue lining. .2) A cream box with University of Ballarat and the Emblem printed in red. Inside is a multi-striped silk and polyester red, blue, gold and black tie with heraldic device of the University of Ballarat on the right bottom corner. It has a black lining..2) woven - University of Ballaratuniversity of ballarat, ties, merchandise, costume, uniform, textiles

Yields information about the reconstruction of the curve on the Mt Pleasant line at Stones Corner.Negative and Digital images of the Wal Jack Ballarat Negative file of the relay of the outer rail at Stones Corner on the Mt Pleasant line. Shows removed rails and methodology of the work. Photo taken at 1220 as shown on the clock - all workers at lunch. In the view are the Listers COR service station, the Inspector chatting with a person, the Ballarat East Post Office and the Stones retail store. The first welding truck (cloth covered roof) with a wandering lead device. See Reg Item 7740 for a photo of similar work at Main and Barkly St.trams, tramways, stones corner, trackwork, track repairs, main road, victoria st, mt pleasant, inspectors, welding

A wooden, oval racquet with a solid convex throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: THE DEMON. Model trademark is stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturer's mark stamped across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Inscription along left side of handle: MADE IN ENGLAND. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tapetennis

A wooden racquet with laminated concave throat, cloth tape shoulder reinforcements, and medium grooved handle. Inscription across and along throat on obverse: DRIVA/(EXELA)/WILLIAMS & CO. PARIS. Inscription across butt cover, in French: WILLIAMS & CO/1. RUE CAUMARTIN/PARIS/A GARDER SOUS PRESSE. Adhered onto the throat on reverse is a small metallic - possibly silver - diamond device, containing within the initials L.C. Materials: Wood, Gut, Cloth tape, Ink, Glue, Lacquer, Leather, Metal, Stringtennis

A Chemold Rod Laver Professional Model tennis racquet, with ribbon whipping around shoulders and shaft, and leather grip with floral perforations. Model name features across base of head and throat, accompanied by an 8-pointed star device. Chemold logo features along shaft. Gold, black and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, String, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis