Carbon copies of a foolscap form with Ballarat School of Mines apprentice name, attendance, examination results and general remarks and Victorian Railway Reports. The originals were signed by the Head of Department and Principal. Some heads of departments signed the copy including. H. Goldsmith. Subjects include Fitting and Turning and Mechanical Engineering, Electrical Mechanics. fitting and turning, mechanical engineering, trades, apprentices, school report, h. goldsmith

A number of printed, foolscap examinations for the Ballarat School of Mines June Examinations in 1874 for Engineers. Examiners were P. Matthews and Jonathan Robinson.ballarat school of mines, examination, engineers, engineering, p. matthews, jonathan robinson

A number of printed, foolscap examinations for the Ballarat School of Mines, including: Mining and Land Surveying - Levelling (Examiners P.C. Fitzpatrick and C.W. Thomas, 1879 Metallurgy (Examiner J. Cosmo Newbery), 1882ballarat school of mines, examination, engineers, engineering, p. matthews, jonathan robinson

Ballarat School of Mines is a predecessor of Federation UniversityLetter from The Institute of Engineers, Australia regarding the Sixth Engineering Drawing Competition. ballarat school of mines, institute of engineers australia, sixth engineering drawing competition, correspondence, c.h.d. harper

The three signs were used at Ballarat School of Mines and Industries, possibly during the time Harry Arblaster was the Principal - 1959 - 1964. They would have come from the Science and Engineering Departments.Wooden desktop signs with gold lettering and stands Gold lettering: .1) METALLURGY; .2) PURE SCIENCE; .3) CIVILballarat school of mines and industries, harry arblaster, principal, wooden desktop signs, science, metallurgy, pure science, civil, engineering

This windcheater was worn by John Barker who was the son of E J Barker who from 1949-1960 was a Lecturer in Mechanical Engineering at the Ballarat School of Mines (SMB). Then from 1960-1964 was Vice Principal at SMB and was Principal of SMB from 1964-76. Then from 1976-1987 was Foundation Director of the Ballarat College of Advanced Education (BCAE) until his retirement. The Library at Federation University was named in honour of E J Barker. John completed a Diploma of Mechanical Engineering at the Ballarat College of Advanced Education and a few years later a Bachelor of Engineering. John was a keen sportsman particularly enjoying hockey and sailing. He died as a result of an accident on 16 June 1994.This orange coloured cotton knit windcheater has a built-in v-shaped rib fabric inset at the top front. The rib is also at the round neck, cuffs and waist. On the front is printed in black, the crest with the words 'School of Mines' around the crest and 'Ballarat' underneath. john barker, edward john barker, ballarat college of advanced education, wincheater, ballart school of mines

The Ballarat School of Mines was the first school of mines in Australia.Exercise books of newspaper clippings relating to the Ballarat School of Mines. Clippings include: 12 Feb 1936 - State Scholarships 12 March 1936 - Dr J.R. Pound 19 March 1936 - MacRobertson Scholarship 23 March 1936 - gift to the museum - Wardle and Jermyn donate timber specimens 11 May 1935 - A.W. Steane 13 June 1936 - Frederick Longhurst appointed art instructor 27 July 1936 - Ballarat Junior Technical School Reunion 11 Sept 1936 - Wiltshire Poster Competition 30 Oct 1936 - Dressmaking classes 20 NOv 1936 - Nornie Gude NOvember 1936 - Ballarat School of Mines Reunion 16 March 1937 - Oval for Ballarat Junior Technical School - White Flat 11 Nov 1937 - Poster competition - Betty Brown and Albino Paganetti 08 Feb 1938 - Frederick J. Martell obituary 07 July 1938 - Henry Kum-Yuen 14 July 1938 - Red Cross Competition for Women 06 Aug 1938 - School Pine Plantation at Vale Park 19 Aug 1938 - Memorial trees planted at Ballarat Junior Technical School to the memory of Cliff Ellis and Ken Butler 06 March 1939 - Ballarat School of Mines Reunion 16 May 1939 - Ballarat School of Mines Battery 19 April 1940 - Progress of Technical Education - New Engineering workshop opended by Sir John Harris 03 June 1940 - W.H. Middleton obituary 16 July 1940 - Training munition workers 30 May 1941 - Lady Tracers 19 Oct 1942 - War Poster competition 24 February 1944 - Ballarat School of MInes Record Enrolments Feb 1944 - D.F.C. for Ballarat Airman H.J. Trevenen 11 Feb 1945 - Harold Herbert Obituary 14 Oct 1945 - Technical Schools in Wartime 23 Feb 1946 - Molasses and Chaff for SMB Initiates 06 June 1946 - Plans for Victory Ball 13 Sept 1946 - Ken Walker sculpts Prime Minister Chifey's bust 23 Aug 1946 - Edgar McConnon obituary 24 Oct 1946 0 Retirement of A.F. Heseltine 25 Nov 1946 - Army huts for classrooms 12 Dec 1946 - Proposed New Theatre for Ballarat by Geoff Richards 16 Dec 1946 - Ballarat Junior Technical School Old Boys who served in armed forces during World War Two 28 July 1947 - Pottery section at Ballarat School of Mines 31 July 1947 - Red Cross Hut removed to the Ballarat School of Mines 10 March 1948 - Guncotton Factory buildings to become nurses quarters 18 March 1948 - Samuel Mayo Obituary ballarat school of mines, ballarat techncial art school, swimming shield, ballarat school of mines museum, ballarat war museum, sydney pern, t.m. pescott, c.w. brazenor, victory ball, w. rowe, joan walker, graeme dowling, ken walker, prime ministers' avenue, ben chifley, amalie feild, amalie colquhoun, h.h. smith, portrait, girls' preparatory classes, world war two, w. williams, raaf, w.s. williams, william william, william williams, new workshops, herbert j. trevenen, harold herbert death, les crouch, swimming, ballarat city baths, heather scott, clunes hospital nurses' quarters, ballarat ladies' art association scholarships, samuel henry mayo, samuel mayo death, girls preparatory classes, w. william, pilot, killed in action, education reform, ballarat schoool of mines museum, h.j. trevenen, world war ii, world war 2, ballarat junior technical school war service, nurses quarters, guncotton factory building, s. mayo death, initiation, ballarat school of mines scrapbook, newsclippings, j.r. pound, macrobertson scholarship, a.w. steane, ballarat junior technical school, wiltshire's poster competition, ballarat junior technical school old boys' association, ballarat junior technical school old boys' reunion, nornie gude, a. nye, albino paganettu, betty brown, dorothy woolcock, jean coates, jack hewitt, hazel robinson, gilda gude, white flat oval, gauge tower demolition, a.f. hesiltine, darwin, victor greenhalgh, frederick martell, memorial trees, cliff ellis, valda king, pharmacy, reunion, engineering workshops, thomas k. sim, daylesford, battery, h.h. smith reunion, ballarat technical art school reunion, w.h. middleton obituary, munition makers, plumbers, pottery industry, girls education, munition trainees, lady tracers, waterloo prize money, war museum, art as vocation, art education, nine-inch telescope, returned soldiers' league, repatriation classes, pinkertson scholarship, amel robert gordon, projector, pethard cup, ballarat food appeal for britain, queen mary, ballarat swimming pool, ballarat school of mines initiation, swimming carneval, prime ministers avenue, edgar mcconnon, community theatre project, world war two service, john l. burt, hockey, pottery, ceramics, ballarat school of mines coat of arms, coat of arms, k. bremner, red cross hut, s.m.b. follies, ken palmer, s. mayo, chinese, albert steane, university women, a.f. heseltine, student activity, swimming sports, albino pagnetti, w.h. middleton death

Twenty two page Ballarat Courier supplement celebrating the 140th year since the establishment of the Ballarat School of Mines. Contents include a timeline; Ballarat School of Mines HIstory; Graeme Hood and Electrical Engineering; Australian War Artist Geoff Mainwaring, Prospects Training Restaurant; Ballarat Gaol, Gaol cells underneath the E.J. Tippett Library; Ghost tours; School of Business; Brewery Complex.ballarat school of mines, anniversary, 140th anniversary, smb campus, david battersby, timeline, trades, manufactuyring services, cindy brundell, graeme hood, electrical engineering, celtlink, geoff mainwaring, julia mainwaring, australian war artist, prospects training restaurant, li ji yuane, caitlyn murrell, joshua martin, ballarat gaol, ballarat gaol cells, eerie tours, ghost tours, nathanie buchanan, peter dyer, ben swanson, nikki green, dylan reece, matthew lewis, business services, betty collier, feduni college, ub tec, manutacturing technology training centre, mttc, brewery complex

Ballarat School of Mines student.Framed certificate from the Ballarat School of Mines for a Diploma in Mechanical and Electrical Engineering.ballarat school of mines certificate, mechanical engineering, electrical engineering, e.j. tippett, thomas g. farr, ferguson, geoffrey biddington, alumni

Certificate outlines what service and competency are required for the Certificate of Mine Managers. For Competency Certificate the Board will accept the Degree of Bachelor of Mining Engineering, University of Melbourne and Diploma of Mining Engineering of approved School of Mines, as the equivalent of the Board's examination and two years' practical experience.Type written information on requirements to be a Mining Manager under the Mines Acts Victoria.Dated 17th February 1914 in Melbourne R U Birrell, Secretary of Board of Examiners for Mining Managers certificate, mine manager, mines acts, victoria, service, competency, bachelor of mining engineering, university of melbourne, diploma of mining engineering, school of mines, r u birrell, mines department

This item was last used at the Ballarat School Of Mines, Flintoff Building Studies Centre, Youille Street, Ballarat. Instructors at the above centre used them. Two pages photocopied from a text book dealing with timber trusses (100-101) are filed for reference.A steel disc equipped with four cutting blades bolted to disc periphery. Disc mounted on a plain shaft, top end can be inserted into a chuck, bottom end enters a pilot hole. Purpose - to produce a circular deep groove in structural timber. Stored in a green wooden box.Stamped on disc top and bottom faces "TECO 418" On front of box, ' "TECO " GROOVING TOOL' On lid of box, "TIMBER ENGINEERING Co - SYDNEY - N S W " Brass hook for closing lid.ballarat school of mines, flintoff building studies, cutting blades, disc, chuck, plain shaft, circular deep grooves

Copy of a typed letter addressed to E.R. Field of the Technical Schools Association of Victoria regarding financial assistance to students at Technical Colleges. On the recommendation of the Universities Commission the following Victorian institutions are approved institutions for the purposes of financial assistance:- * Ballarat SChool of Mines and Industries, Ballarat * Bendigo School of Mines and INdustries, Bendigo * Footscray Technical School, Footscray Gordon Institute of Technology, Geelong * Melbourne Technical College, Melbourne * Swinburne Technical College, Hawthorn Financial assistance was made available to full-time day students attending diploma courses in Engineering, Science o r Architecture. war organization of industry, ballarat school of mines, john dedman, e.r. field, technical schools association of victoria

This brass cow bell was recovered from the wreck of the sailing ship ‘Loch Ard’ at Mutton Bird Island, near Port Campbell, Victoria, from late 1960s to early 1970s. Cow bells were listed as part of the cargo on board the Loch Ard. This bell is now part of the John Chance collection. Flagstaff Hill Maritime Village’s divers also recovered similar bells from the Loch Ard wreck in 1973. One of them was found in a sandy hole in the centre of the wreck site. All of the recovered cow bells are without their hangers. A bell of this size could have been used by horse or cattle teams. Cow bells were a common Colonial item. They were hung around the necks of grazing domestic cows and goats, bullock and horse teams, even camel teams so that they could be found again. Sheep and cattle drovers used them as a warning for night time disturbances such as wild animals. The maker of the cow bell, James Barwell, was a bell founder established in Birmingham, England, from 1784. In 1842 he acquired Fiddian’s firm of ‘Steam and Water’, keeping its name and stamping it on some of his products. According to his advertisement in the Exhibitors guide for the Church Congress of 1887, he made bells and fittings for churches and schools. He also made bells for cloches and chimes, and made tuned musical handbells. He repaired and reproduced bells, and he had a team of experienced ringers to “inspect towers and report upon the tone and condition of bells and fittings.” In 1903 he became incorporated as a Limited Company, ‘engineers’ and plumbers’ brasswork, and bell founders.’ In 1914 he advertised as ‘Cock and Bell Founders’, specialising in plumbing and engineering fittings, church bells, and “every description of hanging and hand bells.” Some of Barwell’s products were stamped with his maker’s mark (his initials J. B. either side of a cross entwined with a ‘B’ in an oval of oak leaves (for Birmingham)). James Barwell bells were no longer made after 1920. James Barwell was among makers who exported bells to the Australian colony from the 1860s. Early Australian iron animal bells were also made from the 1860s by blacksmiths such as Anthony Morgan from 1861, August Menneke from 1867, and Samuel Jones from 1868. Few brass bells were produced here in those times. This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Its significance is increased by being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late 1960s to early 1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The cow bell is also significant for being part of Flagstaff Hill’s collection of artefacts from LOCH ARD, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Cow bell; heavy brass, flat top, pyramid shape, rectangular head, shoulders flare out to rectangular mouth. The head has two same-sized tooled holes for adding the hanging yoke. Inscription on top and one side. Encrustations are on the metal in places. The hanger and clapper are missing. Made by James Barwell of Birmingham.Stamped on the head "BARWELL / - - - / - - -- ING" [Perhaps BARWELL - - - BIRMING. Could size be in centre? 3 3/4 IN?] Stamped on side [motif] (undecipherable) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, loch ard, mutton bird island, glenample, eva carmichael, tom pearce, james barwell, cow bell, horse bell, bell founder, bell smith, vintage bell, birmingham bell foundry, farmer, shepherd, drover, stock bell

EIG School - Ralph Birrell Collection - Latrobe Uni Construction, 1965-69. Applied Science buildins and Engineering room at the Uni. Cupboards and work bench. Markings in plastic mold: Perutz, Made in Australia.Perutzeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection - latrobe uni construction, 1965-69.

12 photos taken around Port Melbourne in the 1970s. (01) Rouse st dwellings (02) 61-69 Bay st - two copies (03) Faram Bros hardware (04) 286 Nott St (05) 348 Bay St (06) 244 -246 Nott St (07) Tom BUCKINGHAM clothing shop at 79-85 Bay St - two copies ( 08) 1 Beach St residence (09) Metthodist Church (now demolished) (10) Corner Bay and Rouse Sts, Old Post Office (11) Former fire station at 143-145 Liardet St (12) Nott St Primary schoolfaram brothers hardware, engineering - roads streets lanes and footpaths, built environment, religion - wesleyan methodist church, rouse street, bay street, theodore thomas (tom) buckingham, beach street, post office, fire station, nott street state school

Mr. George Thomas' connection with Collingwood Technical School began as a junior technical student at Collingwood in 1913. He then became an apprentice in the electrical trades during which time he also undertook a Diploma course in Electrical Engineering. Mr Thomas was appointed as a teacher (part-time) of Electrical Wiring at Collingwood in 1922 having had previous experience teaching in Geelong at the Gordon Institute of Technology. In 1930 Mr Thomas became a full-time teacher in Electrical Trades, the year of the commencement of the Apprenticeship Commission in Victoria. In 1937 he was instrumental in introducing electroplating as a trade whereas it had previously only been taught as a section of the Electrical Trades. This was a period of severe economic constraints following the Great Depression and spending on education was limited. Needing the latest knowledge of industrial practices, Mr Thomas canvassed electroplating industries around Melbourne seeking employment opportunities and met with favourable responses. He approached Quinton’s electroplating firm in North Melbourne with the proposal to work for them on Saturday mornings without payment. In return for his labour, he asked to be taught the basics of the trade. During the week he was able to impart his knowledge to his students. Initially, he wanted to develop electroplating as an outlet for the Youth Employment Training Scheme. Once the class was firmly established, he submitted a proposal to the Education Department to establish an Electroplating Department, and this became the first of its kind in the southern hemisphere. He gave up teaching in 1939 to become the Northcote City Electrical Engineer where he served for 26 years. During this time he was also a Consulting Electrical Engineer to Box Hill and Port Melbourne Councils. His association with Collingwood Technical School (and later, College) continued, first as an examiner on the State Electricity Commission (SEC) panel and from 1947 as a member of the School Council. He was president of the Council in 1961 and 1962. He also represented the College on the Northern Regional Council and participated in the selection of Electrical Trades teachers. For four years, 1967-1971, he represented the metropolitan Technical Schools and Colleges on the Council of the Monash University, in which capacity he gave outstanding service to technical education. George H. Thomas attended his first Council meeting on June 12, 1947 and remained on the Council until the secondary and post-secondary sections were separated in 1981 – a period in excess of 34 years. (See Scott p36).Black and white photographs of Mr. George Thomas who had a long association with Collingwood Technical School and Collingwood Technical College, spanning the years 1937-1972. He began his connection with the school as a teacher and went on to become a member of the School Council. He introduced Electroplating as a trade to be taught at Collingwood Technical School in 1937. (Scott p36) The photographs include one of Mr. George Thomas in Monash University regalia 1971. Another of Collingwood Technical School Council 1972 with Mr. Thomas. Images also include an excerpt from Mr. Scott's history.collingwood technical school, george h. thomas, electroplating course, nmit

Two hand written pages with year dates and what took place at that time. Dates range from 1852 to 1950's. 1950's - mining stopped in Long /G. 1926 - First Teachers training College established. Taylor Horsefields Engineering works - Horsefield a genius. Pioneered local production of compressed air driven roak-drills, specialized in rock bores and drills exported them throughout the world. Harvester - for f/ter in Harvest equipment. 1856 - Anglican School opened held church as well as school. Manchester Arms, Admiral Arms both has pretentious music halls attracted large crowds. 1862 - Ironbark, Long Gully sought annexation by the Municipality of Sandhurst. 1872 - Long Gully Fire Brigade was formed. Keen rivals. 1850 - recognised Chinese camp. ? Long Gully - due to the sinking deeper and the rewards generally richer, became the heart of 'Little Cornwall' - Cornish people. * Tent Church services held in 1862. Long Gully Mine opened April 1852. On the back of the first page is written - Mines - Reefs. mines mentioned are New Chum Hill, the New Chum and Victoria, The Victoria HIll Ironbark, The North Old Chum, Lansell's Big 180, Ballerstadt's Open-Cut, and the Victoria Quartz Mine.bendigo, history, long gully history group, the long gully history group - 1852 to 1950's, first teachers training college, taylor horsefields engineering works, anglican school, manchester arms, admiral arms, municipality of sandhurst, long gully fire brigade, chinese camp, little cornwell, long gully mine

Collingwood Technical School trained apprentices in many trades. These photographs depict some of the machines and machine parts built in class. Captions : 1. Marking off and checking castings 2. Examples of other machine parts, etc., being made in Youth Employment classes in engineering machine shop. 3. Cutting the traversing screw for a 5 ¼ inch lathe. 4. Grinding lathe spindle. 5. Cutting helical flutes in a shell end mill. 6. Arbor Press. Another valuable machine produced by Youth Employment and senior technical evening students. 7. Milling angular slides of lathe saddle. 8. 5 ¼ inch lathe product of Collingwood Technical School. These are high quality professional photographs taken circa 1940. 8 black and white photographs mounted on brown card. Photographs depict various aspects of lathe work.Each photograph has a hand written caption on the front. Also handwritten in black pen "Allan Studios".collingwood technical school, cts, apprentices, students, lathes, machinery, machine parts, nmit,