SKI TICKETS Before tows and lifts were introduced at Falls Creek, it could take skiers 20 minutes to climb to the Summit … but only TWO minutes to go back to the bottom. The arrival of tows, then chairlifts and T-bars changed the face of skiing forever. The first rope tow was constructed by Toni St. Elmo for the 1951 winter season. Bob Hymans installed a smaller tow for his guests at Skyline Lodge. Tows were still quite slow, so in 1956 Bob Hymans created his single chairlift. In 1958 the Village rope tow, designed by Albury engineer Jock Wilson, opened. It was financed by shareholders including Bill Griffith (Bowna Ski Club) and the Bridgford family (St. Trinian’s Ski Club). Several other tows followed including the Summit T-bar in 1961, built by Ron McCallum and operated by Alpine Developments Pty. Ltd. which was a company formed by C. H. (Bill) Bridgford. By 1982 Falls Creek was served by 16 different lifts or T-bars, all owned and operated by Alpine Developments (Holdings) Pty. Ltd. During the development of Falls Creek, different methods have been used to pay for the use of tows, lifts and T-bars … including metal tokens, single tickets, strips of tickets and season passes. The Falls Creek Historical Society Collection includes many examples of these items.These ski passes are significant because they were issued to a pioneer of the ski industry in Falls Creek, Victoria.Passes for Phyl and Bill Bridgford for 1991' Charles (Bill) Bridgeford built a family lodge called St. Trinian's in the early 1950s. Bill had previously worked in the family shipping firm and had been Member for South Eastern in the Victorian Parliament. He became one of the shareholders in the Village rope tow which had been a failure partly because too many people had been involved. In 1960 Bridgeford approached Toni St. Elmo with an offer to buy the Nissen tow and Nissen Lodge which was accepted. With friends Geoff Henke and Ron McCallum, an engineer, he formed Alpine Developments (Holdings) Pty. Ltd. Ron had also been Lift Manager at Mt. Buller and together they acquired the Village rope tow and replaced it with a T-bar. They gained the franchise to operate all ski lifts and T-bars and later the Falls Creek Ski School. Alpine Developments (Holdings) Pty. Ltd continued to expand the lift network until 1983 when the lifts were sold to Transfield.Card 1 - 91 Season Adult BILL BRIDGFORD "SNOW CRYSTAL" Card 2 - 91 Season Adult PHYL BRIDGFORD "SNOW CRYSTAL" Card 3 - 91 ADULT MORNING AUG 18 - 18 VIC VETERANS RACE !! On Reverse - instructions $032.00 Card 4 - 91 1 DAY ADLT JUL 26 - 26 FRYERS FRIDAY FRENZY On Reverse - instructions $043.00bill bridgford, 1991 season pass, vic veterans race falls creek 1991

This hammer was used by workers on the ski lifts to clear them of ice. The hammer was turned by the Ski Lift Company and had a long reach. It was mainly used on the Summit T-Bar and the International Poma before they had catwalks to enable easier access for maintenance. This item was donated by Douglas Zolla. He has worked in Falls Creek for over 30 years. From 1987 until 2002. Doug worked as a De-icer with the Falls Creek Ski Lifts Company. For many years he has been a guide with Falls Creek Snowmobile Tours.This equipment is significant as it was created by the Falls Creek Ski Lift Company to ensure safe operation of their ski lifts.A metal hammer with orange tape on the handle and a rope attached.ski lift maintenance, falls creek ski lifts, de-icing ski lifts

These photographs were taken in and around Falls Creek by Samuel Keith Pearce and printed for him as a foldout postcard by NuColor Vue. The postcards state they were printed for S. K. Pearce Pty. Ltd of Tawonga and Mount Beauty. Samuel Keith Pearce was born on 24 June 1917 in Armadale, Victoria. By the late 1940s he owned the Mt Beauty Supermarket, Newsagency, Drapery and Hardware store at Mount Beauty and also a store at Tawonga in partnership with his brother Gordon Cathew Pearce. For some time, they operated as Pearce Brothers. In the early 1960s Keith also opened a mini mart In Falls Creek. As well as being a keen photographer and an astute businessman, Keith Pearce was a well-known identity in the Kiewa Valley, making many contributions to the development of the area over a long period. This included serving as a member of the Bright Shire Council for many years. He worked hard to promote the interests of the Upper Kiewa Valley. As a sign of recognition and appreciation for his contribution to the community, the park opposite the grocery store in Mount Beauty was named the SK Pearce Gardens in his honour. Samuel Keith Pearce died on 7 July 1994 in Mount Beauty, VictoriaThis collection of postcards and image is significant because they were commissioned by a highly successful business in Falls Creek, Victoria.A high definition photo of the Beginners' slopes at Falls Creek, Victoriarope tows, beginners slopes falls creek, falls creek resort

1950 decade HAY FORK - A local invention. Bill and Arthur Gillespie and Bon Barrie In the early 1950’s Bill Gillespie of Bulmans Lane had been experimenting in developing a machine to improve the collection of hay sheaves at harvesting and stack building time. The ripened crop was cut by a reaper and binder which bundled the storks into sheaves tied with binder twine. The reaper and binder was towed by a tractor by the mid 1940s previously teams of draught horses were used to pull the reaper and binder. A photograph taken at the Barrie farm shows three binders the first being towed with a tractor and the others with horse teams. Two workmen were needed to operate the binder when cutting a crop. The sheaves collected on the binder and released onto the ground and were scattered across the paddocks. Using a conventional two pronged pitch fork the harvest hands collected the sheaves and placed each one cut edge on the ground in an upright position and layered with about 15 sheaves into an apex shape to form was is known as a stook. The shape of the stook allowed for drying and draining of water if rain had occurred. Prior to the invention of the mechanical hayfork this was a laborious task requiring each sheaf to be pitched onto a tray truck and moved to the location of the haystack. The mechanised HAYFORK was operated by one person on tractor greatly reducing the need for gangs of labourers. At harvest time farmers had relied on itinerant teams of workers descending on the district looking for work. The three Barrie brothers on their adjoining farms combined forces to cut their crop at its optimum time while the weather was in their favour. Up to many 20 workers at times formed a team in earlier times. Agricultural university students were also keen to gain practical experience in the field. Each of the brothers had a particular skill, and Tom Barrie was the expert on stack building. The district haystacks had a distinctive shape and could be recognised by their builder. Bill Gillespie’s first operational HAY FORK consisted of a large 13 pronged fork situated forward of the truck cabin. It was attached with iron girders and mounted on the rear of the cabin to the tray of his British Bedford truck. It was constructed in metal and iron and welded in the farmers work sheds. The mechanism was raised and lowered by the driver scooping along the ground to pick up a complete stook to raise high enough to deposit all the sheaves in one stook onto the stack or truck tray. The fork section was released by a rope and operated by the driver in the cabin. This model was trialled on the Barrie farm at Ferris Lane. It proved to be very successful and the Barrie/ Gillespie brothers went on to develop a HAYFORK which attached to a tractor and was operated with a series of levers and was raised and lowered hydraulically. It was detached from the tractor when stacking was completed. In its early days farmers travelling along the Western Highway called at the Barrie farm at Ferris Lane to inspect its construction and operation of the invention. It became a widely adopted by farmers throughout the State. It was being used on Wattie Palmer’s farm on Bridge Road Melton South in 1997. Farming in Melton, hay growing and stack building. agriculture, local identities

Bosuns chair and harness with pulley. This device suspended a person from a rope and seat to perform work duties in safety. It includes a chair made from a flat piece of wood threaded through with a cable attached to pulleys, which move people or goods up or down heights such as the lighthouse, where it was used for painting the lighthouse and other tasks. It has first level contributory significance for its relative completeness, historic value and provenance to the lightstation.Chair (wooden piece of wood with cable threaded through 4 holes) with cables joining together above seat. Two metal pulleys with wire cable attached.

Pinking shears or scissors were a valuable accessory for any professional or home dressmaker. Pinking shears have serrated edges and they leave trimmed fabric with a decorative edge as well as preventing the fabric from fraying. The words under the trademark "Marque Depose" mean trademark pending. These pinking shears were owned by Mrs. Betty Sheather of Gordon Street, Wodonga, Victoria. Betty was the daughter of James and Elizabeth Fletcher. Her father had many jobs including carriage cleaner with Victoria Railways at Wodonga and her mother was at House Creek State School No. 2266. Betty worked in Arnold's Store, the store of Costelloe & Smith as well as the Bethanga Park homestead as well as Drummonds at Walwa and the Hotel at Ebden. As a younger woman she lived with the Whan family at Stonleigh which was then a rope factory.Betty was a keen golfer and belonged to a club which played at the Wodonga Racecourse and was a member of the Bandiana Golf Club. These shears were owned by a well-known member of Wodonga and were representative of dressmaking implements used in the mid 1900s.Large vintage Comete Pinking Shears / zigzag scissors produced in Italy from metal alloy.On outer side of blade : NINCI COMETE 1948. Beside central hinge in ring shape: COMETE/ITALY/NINCI/ MARQUE DEPOSE.pinking shears, dressmaking

This photo is part of the Fred Griffith Photographic Collection. Frederick Charles “Fred” Griffith was born in Albury, NSW on 2 March 1910. He was one of the pioneers behind the development of Falls Creek and an inaugural member of the Albury Ski Club. The Nissen rope tow was built by Toni and Skippy St Elmo in 1951, but after 5 years it became obvious another tow was needed for the novice and intermediate skiers. A proposal was put to the Management Committee to erect a Village rope tow, with interested people becoming shareholders. This tow, designed by Albury engineer, Jock Wilson, was working by 1958. Fred Griffiths and some of his family members were amongst the shareholders. After a serious work accident, Fred retired in 1985 and moved to Rosebud, Victoria where he died on 19 August 1992.This image depicts an important development allowing further access to Falls Creek Alpine Resort.A black and white photo of the opening of the Village Tow at Falls Creek in 1959. It shows the buildings and a group of people gathered for the occasion.fred griffith, albury ski club, falls creek, bowna ski club

Six pages of handwritten notes regarding the New Chum Drainage Proposals. Extracts from the Bendigo Advertiser mentioning the rising of the water in the New Chum Mines. An Advertiser report 27/12/1910 mentions that deep mining will have to be abandoned owing to the absence of some proper scheme to cope with the water. An arrangement had been made by which the companies affected along the line should contribute to a scheme. Suggestions made that the water be lifted by electric pumps. Baling with tanks had been tried for 6 months and then abandoned. Directors Report Victoria Reef Quartz Jan 1911 mentions unwatering had been carried on with assistance of Government. On the 20th Dec, one rope gave out. Decided that replacing it and doing the necessary work could not be met in the present financial conditions. It was also considered that the costof trying to reach the bottom reefcut in the New Chum Railway could not be continued by baling as its cost proved too expensive, while it could probably be done economically & effectively by electric pump which is now subject to negotiations with the Mining Dept.' At the end of the report is a Balance Sheet. Document from Albert Richardson Collection of mining history.document, gold, drainage problems, drainage problems, new chum drainage proposals, bendigo advertiser 11/1/1911 page 7, victoria quartz, victoria consols, bendigo advertiser 5/7/1910 page 3, mr h v whitelaw, mines dept, insp ross, lansell's 180, 222, new chum consolidated, lazarus, bendigo advertiser 6/7/1910 page 7, 9/7/1910 page 9, drainage troubles, bendigo advertiser 8/7/ page 8, new chum railway, south belle vue, eureka ext'd, bgo adv 25/7 1910, 27/12/1910 page 2, rae's machine, bendigo advertiser 2/1/1911, mr mcbride, mines dept, mr stanfield, mines act, bendigo advertiser 16/1/1911 page 3, victoria reef quartz half yearly meeting 1911, directors report and balance sheet, geo paynting

Set of five photocopied documents, A4 sheets, stapled in top left hand corner concerning re-organisation of the PTC - which would involve the transfer of employees, redeployment and a redundancy scheme. .1 - MOA/MTA stop work meeting 1/12/1987 Recommended Resolutions - 1 sheet .2 - MTA Officer re Transfer, Redundancy and redeployment scheme and associated Trades Hall circulars dated 26/11/1987, letter from Minister Roper dated 19/11/1987 - 5 sheets. .3 - Trades Hall response to proposals dated 13/11/1987 - 1 sheet. .4 - Trades Hall Circular - 30/9/1987 Re use of contractors - 3 sheets. .5 - Trades Hall Circular - 30/9/1987 re MTA Transfer, Redundancy and redeployment scheme - 14 sheets.trams, tramways, ptc, metplan, unions, buses, tramways, public transport, mta, minister for transport

Magazine - 20 A4 pages centre stapled - titled "MetLines - Vol 1, No. 9 December 1985", staff newspaper of the Metropolitan Transit Authority. Has a number of "Santa Claus" on the front cover. Contains an article on page 8, "Keeping tram lines clean" and "Scrubber Cars" - featuring Frank Reale-Key posing in front of Scrubber 8W. Also has a photo of scrubber No. 11. Gives a background to the cars, when they are used, operated by Civil Branch. Gives hours of use and crews. Another item is "Tram centenary celebrations a success" - Event and cavalcade of trams on 11/11/1985, celebrating the commencement of the cable car services in Melbourne. Notes the unveiling of a plaque by Mr Roper, assisted by Keith Kings of the TMSV. Other items tramway related are the celebration - 70th marriage celebration of Harry Heaton who worked at Preston, Glenhuntly depot cricket team and on the rear cover a photo of Norm Maddock at the Picnic function at Wattle Park. On page 3 is a follow up to a question on a MTOC conductor with the large safety pins of the era. Not all pages scanned.trams, tramways, scrubber tram, the met, conductors, track, mto co, centenary, cable trams, cavalcade, tram 8, tram 11

Magazine, published by the Metropolitan Transit Authority of Victoria "Met Lines" (Metlines) - A4, printed on white gloss paper, with the MTA logo or symbol. Issued under the name of L. A. Strouse as Chairman. Continues from Reg Item 1058 "Met Lines" - printed in an A3 version, Now a monthly version printed in an A4 size. Major tram and bus items listed. Tramway and bus names only listed, not railway. .1 - Vol 1 No. 5 - August 1985 - 20 pages - announcement of trams for Hong Kong, Minister Tom Roper, tram posters, an article on the work of the TMSV with photos. Retired tramway employees association, Minister visiting Brunswick depot, Melbourne Brighton Bus Lines joins the Met - has photos of staff. .2 - Vol 1 No. 6 - September 1985 - 20 pages - tram emergency crew - derailment of 34 at Russell and Burke and Emergency crew at work and in front of truck, Joe Saccasan foreman at South Melbourne and artist, Doncaster Bus depot, The Met Transporter at the Royal Melbourne show. .3 - Vol 1 No. 7 - October 1985- 20 pages - front page Emery Worldwide courier Elizabeth Sciberra with driver John Edwards, competition to detail a photo of cable tram conductor with very large safety pins (for the bell punch tickets), Hong Kong Kowloon-Canton KCRC inspection tour of Preston Workshops, new tram track construction, Essendon depot Soccer Club premiers winners, Malvern Depot photos and story, Norm Cross and making of Malcolm, Conductor training at Hawthorn depot, photo of enthusiast Paul Jordan, Bus and Coach Society of Victoria article with photos of MMTB Double Decker 244 and a Thornycroft bus No. 14. Article on MMTB uniforms - cable trams, PMTT with photos. .4 - Vol 1 No. 8 - November 1985 - 20 pages - front page cable sketches of cable trams - Met Annual Report, Personnel management, 100 years of Melbourne's tram - many photographs, history timeline for trams, Marketing new posters (See Reg Item 585), tram tours, the Outer Circle Railway - bike path, Essendon depot to be redeveloped, lunch at Hawthorn Training School, tram wheel grinding - James Hajjar. .5 - Vol No. 9 - December 1985 - 20 pages - MTCO Conductor competition - Ray Marsh, Met Posters, Footscray Bus Depot, Scrubber trams, calendar, tram centenary celebrations a success, old Bourke St head office plaque unveiling by Tom Roper and Keith Kings of TMSV, Eric Hobday MMTB Relieving Depot Master remembers the cable trams last day, Alan Jennings retirement, lists personnel movements within The Met. For next year 1986 - see Reg Item 1086trams, tramways, mta, the met, cable trams, conductors, bell punch, hong kong, tram track, malcolm, training, hawthorn, bscv, buses, uniforms, pmtt, mmtb, annual reports, personnel, 100 years of electric trams, posters, outer circle railway, footscray depot, scrubber tram, tmsv, posters, melbourne brighton bus, brunswick depot, r10 vehicle, emergency, derailments, tram 8w, tram 11w, tram 34

Notice or circular - titled "Passengers on St Kilda Road", authorised by J Harper, Secretary of the Australian Tramway & Motor Omnibus Association (ATMOEA), about tram priority at St Kilda Junction, asking tram passengers to write to Tom Roper, Minister for Transport seeking action to improve traffic signals. Tom Roper was Minister for Transport from 1985 to 1987.Demonstrates the Union's work on tram priority.Notice - A4 sheet printed with dark blue ink.tramways, traffic signals, st kilda junction, unions, tom roper, atmoea, j harper

Report - 88 pages - perfect bound +card covers + fold out map, looks at the development of arterial roads in the various Melbourne regions, includes recommendations and road, management. Has table of contents, diagrams and maps. Includes findings of the studies, issues with freight transport, improvement proposals. Little work on public transport as such. Title "Metropolitan Arterial Road Access Study, April 1987 - Melbourne's Arterial Road Strategy the next 10 years - METRAS" - Has foreword signed off by Tom Roper, Minister for Transport. Report M6trams, tramways, public transport, road transport, minister for transport

The original line to the Essendon Aerodrome was constructed in 1943 to serve the airport and aircraft construction. It was funded by the Commonwealth Government. By 1976, patronage to the airport terminus in Vaughan St had dropped, the crossing of the highway to the Tullamarine Airport opened in 1970, was dangerous, and the highway needed to be widened. The new terminus was a short distance to the north between Mathews Ave and the Highway. This series of photographs show the last day of operations to the original terminus and the changeover, which was done in about 7 hours. No buses were required. It was done by workers of the Melbourne and Metropolitan Tramways Board. The line was later extended to Airport West. .1 - W5 789, (Essendon Airport Route 59) about to turn from Mathews Ave into Vaughan St. Has new track and footbridge in the foreground. .2 - W5 791 on the siding or spur at the airport terminus, the last tram to use this facility. .3 - W2 571, at the Airport terminus alongside Vaughan St on the last morning of the use of this terminus. The Bundy clock can be seen behind the pole on the lefthand side and the Brick passenger shelter. Shows buffer stops, and Forestair hanger behind. .4 - W2 595 turning from Vaughan St into Mathews Ave. Has the tram stop No. 55 in the view. .5 - W5 839 turning from Vaughan St into Mathews Ave. Shows the flashing yellow light that gave some protection to the trams. .6 - W2 247 about to turn into Vaughan St. Driver about to reboard the tram. Note the new copper trolley wire is up for the new track but has been pulled to the west side using rope. .7 - W5 805, turning from Mathews Ave into Vaughan St, to the old Essendon Airport terminus. Has a new track in the foreground, and the overhead for the curves is still in position. .8 - W6 991 turning from Vaughan St into Matthews Ave, at 855am, the last tram from the old terminus. The track gang has commenced work to remove the outbound curve. Would appear four passengers waiting at the tram stop, two with lunch bags. Note the cattle grid in the foreground between the rails. New rails on the ground on the left-hand side. See Reg Item 6163 for further photos of this event.Yields information about the last day of the operation of the original Essendon Airport tram line.Set of 8 Kodachrome cardboard mount colour slides of the relocation of the Essendon Airport tram terminus 7-10-1976, by Ron Scholten.All slides have detailed descriptions on the reartrams, tramways, essendon aerodrome, essendon airport, closure, new tramways, route 59, w5 789, w5 791, w2 571, w2 595, w5 839, w2 247, w5 805, w6 991, w2 class, w5 class, w6 class, mmtb, trackwork