7 Field Squadron, Royal Australian Engineers Conflict Indonesian Confrontation, 1962-1966 Category Unit Conflict Indonesian Confrontation, 1962-1966 Unit hierarchy Australian Army 7 Field Squadron, Royal Australian EngineersWooden crest with badge in centre, red with gold trim.Below a large numeral 7, are the letters: FD SQN RAE

standard style of a jacket battle dress from the late 1940s to 1982; it was used for parade dress; this jacket was worn by a warrant officer class 2 of the Royal Australian Electrical and Mechanical Engineers.This jacket has historical significance because it representative of a standard style service battle dress worn by soldiers of the Australian Army Post WW2 until the introduction of the modern polyester cotton uniforms. It is also in excellent condition, which is special considering it's age. Waist length jacket, with two breast pockets either side, collar, olive green, two shoulder patches on both side ones says “Royal Australian Electrical & Mechanical engineers” in Bright yellow/gold writing on a in navy blue shoulder patch; a ranking insignia of Warrant Officer class 2 above the cuff of both sleeves Label located inside the jacket on the right hand side it says “A.G.C.F. VIC 1977 8405.66.025.6423 Size of chest: Size. 109/112PR. Yarra Falls. Batch 21657. Dry clean only Crease upper half of labels only.jacket, jacket battle dress, jacket khaki

Khaki fur felt slouch hat fitted with a puggaree in a light green with a metal Royal Australian Engineers corps badge attached to the front, the rising sun badge attached on the left and a colour patch on the right. Front - Engraved on the Corps Badge: ER/ HONI . SOIT . QUI . MAL .Y . PENSE / ROYAL AUSTRALIAN ENGINEERS /. Left Side - Engraved on The Rising Sun Badge: THE ARMY AUSTRALIAN /. Right Side - Colour Patch Interior - Leather Lining - 1984 / 54 / MADE BY / "FAYREFIELD" / MELBOURNE Lining - HOWEhat, officer, fur-felt, peace keeping

Green vinyl handbook with a velcro opening, featuring a four-part ring binder that holds a paper notebook of written and illustrated information regarding weapons and practices. Front - ROYAL AUSTRALIAN ENGINEERS HANDBOOK / CORPS TRAINING NOTES / VOLUME 6 / SPECIAL TECHNIQUES / PAMPHLET NO 2 / ROYAL AUSTRALIAN ENGINEERS / POCKET BOOK / 1992 / (CTN RAE 6.2) Image -

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a strong connection with the city of Wodonga through its service and training facilities at the Bandiana base on the edge of Wodonga. A shield shaped plaque carved with the emblem of RAEME corps (The Royal Australian Electrical and Mechanical Engineers corps). The edge of the shield is decorated with carved leaves. An engraved metal plate has been attached to acknowledge the presentation of the plaque to the Council of the Rural City of Wodonga. The rearing horse and chain are symbolic of power under control and the lightning flash, of electrical engineering. The rearing horse also forms part of the crest of the Institution of Mechanical Engineers and, together with the lightning flash, is intended to mark the close relationship which exists between the electrical and mechanical engineers in both civil and military life. The globe is indicative of the impact of engineering on the world generally.Attached to rear of shield "Presented to/The Council of the Rural CIty of Wodonga/ by/ The Commanding Officer and Members of/RAEME Training Centre/ 21 October 1978"raeme, australian army

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. This uniform was donated by a RAEME member who served during the Vietnam War. The Corps began sending advisers to Vietnam in 1964 and this foreshadowed a massive build- up of RAEME personnel and equipment which peaked in 1971. The first direct RAEME support was provided in early 1965 as part of 1 Aust Logistic Support Coy (1 ALSC). Prior to 1971 the RAEME elements of 1 Australian Logistic Support Group built up to a stage where there were two field workshops. The withdrawal of all Australian forces was completed in 1972 and RAEME reverted to its peacetime role.This uniform was worn by a member of the Wodonga community who served with RAEME during the Vietnam War. RAEME Corps members are also represented at the Army Logistic Training Centre at Bandiana.Australian Military uniform - this uniform was issued during Australia's involvement in the Vietnam war. It was worn by a member of RAEME (The Royal Australian Engineers), Damien Hunt who is a resident of Wodonga.On shoulder badge: "ROYAL AUSTRALIAN ELECTRICAL / & MECHANICAL ENGINEERS"raeme, military uniforms, australian army

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a long association with Wodonga due to its service at the Bandiana base just outside of Wodonga. The inscription on the side of the base reads: "Presented to the Citizens of the Rural City of Wodonga by the Commanding Officer and members of RAEME Trg Centre on the occasion of the granting of the Freedom of the Rural City of Wodonga to RAEME Trg Centre 21 October 1978RAEME Corps has a long association with the city of Wodonga through its involvement in training and logistics at the army base at Bandiana.An award featuring a small model of the cannon "Zamzama" (Captor of Forts) mounted on a polished wooden base. The award includes a plaque outlining the significance of "Zamzama" on the top and another plaque explaining the significance on this award on the front of the base.Explanation of "Zamzama" beside cannon: "ZAMZAMA (CAPTOR OF FORTS)/ The original 14' 4 1/2" long, with 9 1/2" bore, was cast in brass in one/ piece by Muslim engineers in the year 1757 on the orders of the/ emperor AHMAD-SHAH-ABDALI. It was used in several battles and/ proved its value as a great weapon of destruction. It soon became to be/ regarded as a "Tallsman of Power" and continued as such until it was/ ruined in 1818 at Multan. Today it is housed in Lahore, where it was/ placed by H.R.H. the Duke of Edinburgh in 1870."raeme, rural city of wodonga, freedom of the city wodonga, australian military, bandiana

A cutting from from a Melbourne Legacy President's report showing a photo of Legatee George Blackwood (President of Melbourne Legacy in 1975). It was collected to be a record of a photo of past presidents. In World War 2 Legatee Blackwood served in the AIF in the Middle East, New Guinea and Borneo in the Corps of the Royal Australian Electrical and Mechanical Engineers and was awarded an OBE for services whilst commanding the 2/1 Army Field Workshop with the 9th Australian Division in the Alamein Campaign. He achieved the rank of Colonel. He joined Legacy in 1964 on the nomination of Legatees John Summerton and AN Fraser. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee George Blackwood a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Article with a black and white photo of Legatee George W Blackwood - President 1975past presidents, george blackwood

An article from the Melbourne Legacy Bulletin on the death of Legatee George Blackwood (President of Melbourne Legacy in 1975). The Bulletin published articles on Legatees when they passed away. Legatee Blackwood, born in 1907 and died in 1982. In World War 2 Legatee Blackwood served in the AIF in the Middle East, New Guinea and Borneo in the Corps of the Royal Australian Electrical and Mechanical Engineers and was awarded an OBE for services whilst commanding the 2/1 Army Field Workshop with the 9th Australian Division in the Alamein Campaign. He achieved the rank of Colonel. He joined Legacy in 1964 on the nomination of Legatees John Summerton and AN Fraser. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee George Blackwood a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Typed copy of a page from the Legacy Bulletin on the death of Legatee George Blackwood - President 1975Bulletin No 1209. 17.6.1982. Page No 3 and 4past presidents, vale, george blackwood

Sapper L S Sempel of Royal Australian Engineers traded an Australian Army shirt for this knife, then used it to probe for mines during his service, 1966-1967.Knife with metal blade attached to a wooden handle and bolt hilt. The handle is made up of six wooden spheres joined to the blade. A wooden bolt secures the spheres.Shelham 4131 Japan inscribed on the knife blade.knife, mines, survival knife, us army kabar knife, kabar, engineer, sapper, vietnam, trade, sempel, ka-bar

Standard issue item as used by Australian servicemen during the conflict in Vietnam.Khaki army peak officer capRoyal Australian Engineers badge.vietnam, army, engineers, officer

The slouch hat officially became part of the Australian Army uniform in 1903 and has been made by a variety of manufacturers. Fayrefield hats were at 48-60Nicholson Street, Abbotsford and the factory was formerly known as "Denton Hats". RAE is the Royal Australian Engineers and 1000 of their sappers served in Vietnam at the time of this hats production.Green felt Slouch hat with puggaree and gold & silver plated badge for Royal Australian Engineers, with Queens crown size 6 7/8 dated 1966 manufactured by Fayrefield Melbourne.Made by Fayrefield Melbourneorganization, military, army