Blue metal box containing 1 razor handle - silver colour, 1 razor blade casing detachable 3 loose blades - silver colour 1 packet (wrapping) not blades with.Patenion Blades - No 5.299104personal effects - shaving accessories, shaving kit

Safety razors were fist produced in the late 1800s by the Star Razor Company in U.S.A. and it was a former employee of this company that produced the Gem Safety Razor in 1898. The Gem razor, to be produced in later years by the American Safety Razor Company, became one of the world’s most popular razors and in the 20th century it was the major competitor to the Gillette razor produced in the U.S.A. The safety razor has been largely superseded by the disposable razor blade and the electric razor. This safety razor has no known local provenance but it is retained as an example of the type of safety razor used in households for the most part of the 20th century.This is a silver-coloured Gem safety razor in a rectangular green Bakelite box. The box lid has metal pins acting as hinges and inside the box there are moulded sections to ensure the razor fits snugly into the box. The razor handle has an etched decorative pattern and the top part opens so that a blade can be inserted. There is a blade in this section. On box: ‘Gem’ Blade: ‘Gem Double Life, Gem Blade, British Made’ Inside the razor: ‘Gem Brooklyn New York Made in U.S.A.’ gem safety razor, history of warrnambool

"First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope

The razor was made between 1883 and 1933 by Joseph Allen & Sons of Sheffield, England. It is a form of shaving equipment used for many years, and still by some today. The shaver would prepare for shaving by lathering the skin and hair with soap and a purpose-made bristle brush before carefully stretching the skin and running the razor over it. The razor's blade would be sharpened with a 'strop' strap. JOSEPH ALLEN (C. 1829-1893) Joseph Allen was born in Dromfield, in the Sheffield district of England in around 1829. He was trained as a razor smith and razor back forger. His business grew and he moved to several addresses. By 1883 his firm was named Joseph Allen & Sons and was exporting his products overseas. In 1883 he paid to use the 'NON-XLL' mark to stamp on his metal products. Joseph's tow sons, Joseph and James, were managing his business by 1900, operating at Ecclesall Works, 245 Rockingham Street in Sheffield. They expanded the range of products to include cutlery as well as razors and bought the use of other trademarks. In 1919 it became a Limited company, trading until 1933. This vintage razor represents men's grooming equipment in use over many decades, and even today. The maker is well-known for its quality workmanship and materials.Razor, metal blade with synthetic handle. Blade has steel handle. Razor is contained in black cardboard box. Made by Joseph Allen & Sons of Sheffield, England. On blade "NON - XXL" "Joseph Allen & Sons, Sheffield, England"flagstaff hill, warrnambool, shipwreck-coast, shipwreck coast, flagstaff hill maritime museum & village, maritime museum, joseph allen & sons, sheffield, raxor, shaving equipment, personal grooming, men's toiletries, shaving aid, ecclesall works, non-xll, vintage razor

Standard issue German bayonet 1939-1945Bayonet with blackened 250mm blade. Has wooden handel with 6 groves cut into each side, which fit between the screws. Blade is showing minor pitting and rust."7691"- blade right side "41ASW"-blade right side regimental property, bayonet, wark vc club, german, ww2

The item was souvenired by Andrew Keith Guy VX37836 2nd AIF. Refer 131P for service details also 130.3, 133.2, 134. Solid Aluminium metal base with mounted knife/dagger, the blade is brass. Circular indentation on one side of base. Etched on blade is rough illustration of a hut and sun. Painted red and green dots on each side of blade. Etched on blade: "New Guinea"military history, souvenirs, metalcraft, arms, edged weapons

Saw, possibly Japanese or Chinese. Iron blade with teeth, backward pointing, along both sides of blade, and wooden handle with remnants of black paing. Inscription impressed into base of blade in Asian characters. Inscription on blade has not been translated.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, saw, two-edged saw, chinese saw, japanese saw

Bengal’ THOMAS RADLEY CADMAN & SONS St. Mary's Road, Sheffield In business at least 1892-1919 Originally a trademark of Luke Cadman, Sheffield, England from ca. 1748-1906. From ca. 1906 - 1953, used by: Thomas Radley Cadman & Sons St. Mary's Road, Sheffield. In business at least between 1892 and 1965. The Cadman family originally came from Derbyshire and settled in the village of Eckington, to the south of Sheffield. Luke Cadman (1727-1788) moved to Sheffield in 1740 and became apprenticed into the cutlery trade. He became a freeman of the Cutlers' Company of Hallamshire in 1748 and was granted the trademark "BENGALL". (Another branch of the family was granted the trademark "SENEGALL"). Two of Cadman's sons followed him into the business. The Cadmans' business was located at various addresses in Sheffield over the years. In the early 1870s Thomas Radley Cadman (1833-1917) took over the firm. By 1933 the firm had diversified into safety razor and pocket knife manufacture. T.R.Cadman & Sons, Ltd. ceased trading in 1965. A man's cut-throat razor that folds to protect the blade inside the handle , 'Bengal'on blade 'BENGAL'cut-throat razors, straight razors, shaving equipment, steel blades, sheffield steel, england, thomas radley cadman & sons ltd., cutlers, steel manufacturers, ‘bengal’ trade mark, early settlers, market gardeners, moorabbin, bentleigh, cheltenham,

Ballarat School of Mine had a boot making department. This one of the tools that would have been usedBlade tool - wooden handles and brass blade section"EDMUNDSON - LANCASTER" engraved on blade section "LEITCH" on both wooden handles tool, leather, boot making, ballarat school of mines, skiver, edmundson, lancaster

Rodd's was established by George & Ernest Rodd in Melbourne in 1919.They were manufacturers and wholesalers of precious metal jewellery. Later they began to manufacture high quality silver plated cutlery under the brand name “Rodd”. They then expanded into holloware when they took over Platers Pty. Ltd. who produced a very high quality range of silver plated Sheffield Reproduction Silverware, under the brand name “Hecworth”. Rodd’s established a large factory at 150 Barkly St., St. Kilda, Melbourne. During WW2 with a staff some 200, the factory produced ordnance components to help with the war effort. Rodd’s established sales offices in the main city centres of all States. The company prospered. In December, 1960, Rodd [Australia] Ltd. was merged with Mytton’s Ltd., Melbourne, and became part of the newly formed company Mytton Rodd [Australia] Ltd. Mytton’s were also producers of silver plated cutlery under the brand name “Grosvenor” and were strong competitors to the Rodd brand of cutlery Australia wide. It was a friendly take over and the Directors of Rodd [Aust.] Ltd. were appointed to the board of Mytton Rodd [Aust.] Ltd., and some to the Holding Company Mytton’s Ltd. Mytton’s were heavy manufacturing engineers producing a large range of stainless steel products including: kitchen sinks of various design, beer barrels [9 and 18 gallon kegs] for the breweries, milk vats for cooling and storing milk on dairy farms, a large range of dairy and industrial vessels, road transport tanks, LPG tanks, low pressure pre-mix vessels for the soft drink industry. They also produced a range of domestic bathes, steel railway sleepers, using their 3000 ton hydraulic presses. Mytton’s also had their own non ferrous foundry and rolling mill which produced nickel silver sheet used in the manufacturer of their silver plated cutlery. They also produced copper sheet for their own and industrial use. Mytton’s had factories in York St., South Melbourne and Port Melbourne. Rodd [Aust.] Ltd. set up a manufacturing, distribution plant in Auckland, New Zealand, circa 1960. This company began producing precious metal jewellery in a rented space in the premises of Matthey Garret Ltd., Bullion Merchants, in Drake St., Auckland. Later they moved into their own building in Sale St., Auckland. The company prospered and purchased land and built a factory at 121 Apirana Ave. Glen Innes, Auckland, circa 1964. ( B. McCulloch Rodd Pty Ltd)A butter knife with stainless steel blade and bone handle c1930on blade; RODD / STAINLESScutlery, stainless steel, cheltenham, moorabbin, bentleigh, early settlers, rodd aust ltd, mytton rodd pty ltd, aukland, port melbourne

Pocket knife, blade on one end and pig sticker on other end with loop to hang on beltScouting on blade

A topping plane is part of a set of cooper’s tools used by a cooper. A cooper uses a topping plane, also known as a 'sun plane', to give a level surface to the 'chime' which is the bevelled edge at the top and bottom of a cask.A tool used by coopers for hundreds of years that has not changed in design during that time and is still in use today. Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950. Coopers Topping Plane, wooden with metal blade & metal plate on base. Makers mark on blade unreadablewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers topping plane, coopers, topping plane, sun plane, coopers tools, wood plane

Used in the 20h century.A pair of vintage hand horse clippers with two steel blades, a lower blade or comb and a moving blade or cutter that work together to cut the hair. It attached with screws to two steel handles with wooden grips attached by brass fitments.Imprinted on the metal joining the blades - 'A. Martin & Co. Manufacturers'horse accessories, horses, horse clippers

Sapper L S Sempel of Royal Australian Engineers traded an Australian Army shirt for this knife, then used it to probe for mines during his service, 1966-1967.Knife with metal blade attached to a wooden handle and bolt hilt. The handle is made up of six wooden spheres joined to the blade. A wooden bolt secures the spheres.Shelham 4131 Japan inscribed on the knife blade.knife, mines, survival knife, us army kabar knife, kabar, engineer, sapper, vietnam, trade, sempel, ka-bar

Blade shears owned by Mr R.W. Pettitt, a breeder and judge of corriedale sheep.Detail of makers inscription on blade shears. Blade shears, with leather keeper.COMBINATION / U / T / S / No. 1 / SHEFFIELDshearing, pettitt, mr r. w.

Ward & Payne was founded in Sheffield by David Ward, an edge-tool manufacturer in 1803. The company had the name, David Ward. David Ward's son Edward joined the company around 1837 and the company name was changed to David Ward & Sons or David Ward & Co. Perhaps both names were used in succession it is unclear. Henry Payne appears as an edge tool maker in 1837 and joins the company before 1845. Perhaps he joined in 1837, as a result, this caused the name change to David Ward & Co. In 1843 Henry Payne registered the trademark name of Ward & Payne consisting of the crossed hammers above an anvil with W to the left and P to the right. Henry Payne became the junior partner in 1845 and died in 1850 and ownership of the company then reverted to the Ward family. After 1845 the firm built a large business in edge tools concentrating on carving tools, chisels, and gouges. Another David Ward (1835 - 1889), possibly the son of Edward Ward, took over the company in 1855 and was an aggressive young executive with the company before that. He grew the company's fortunes in both the sheep shearing scissor and carving tool businesses. The company grew and expanded its factory to a full city block and published a 501-page catalog in 1911. The company was still in business up to around 1970. A tool made by a well-known company and regarded today as a collector's item for those enthusiasts that collect vintage woodworking tools. However for further details regards provenance see the note in the provenance section this document.Socket chisel with 1 inch blade end of handle has been sawn off.Has "E" stamped on bladeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hand tool, ward chisel, woodwork chisel

A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut mouldings to create coped rather than miter joints. It is occasionally used to create fretwork though it is not able to match a fretsaw in intricacy of cut, particularly in thin materials. Coping saw blades are always thicker and much coarser cutting than typical fretsaw blades. A coping saw consists of a thin, hardened steel blade, stretched between the ends of a square, c-shaped, springy-iron frame to which a handle is attached. The blade is easily removed from the frame so that the blade can be passed through a drilled hole in the middle of a piece of wood. The frame is then re-attached to the blade and the cut starts from the middle of the piece. Long cuts perpendicular to the edge of the material are possible but the shallow depth of the frame rather limits how far from the edge one may cut. The much deeper frame of the fretsaw is more useful for cutting well away from the edge but conversely cannot manage the thicker materials commonly cut by the coping saws. The coping saw blade is installed with the teeth pointing towards the handle. Unlike a hacksaw, which has the teeth pointed away from the handle, the coping saw cuts on the pull stroke. The coping saw blade is removable by partially unscrewing the handle. The blade is prevented from rotating by means of the short, steady bar provided where the blade is attached. Loosening the handle also allows the blade to be rotated relative to the frame as desired. Carefully aligning the finger steady bars at the top and bottom of the blade ensures that the thin blade is straight and not twisted along its length. Re-tightening the handle tensions the blade and locks it at the desired angle relative to the frame. The short steady bar nearest the handle is held securely between finger and thumb while the handle is tightened to ensure the blade remains at the desired angle. Unlike the fretsaw the coping saw blade has holding pins which lock securely into the angled slots of the rotatable blade holders. Gentle curves are achieved by slowly turning the whole frame by means of the handle while continuing to cut steadily. A coping saw with wooden handle but no bladetools, saws, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, fretsaw, coping saw, bowsaw, blacksmiths,

Kukri knife probably ceremonial chrome blade with etchings with two small sharpening knives lion head on pummelINIDA etchings on blade

Round wooden handle with metal blade bolted to one end.Hoe made by Sheffield impressed on metal blade.garden, farming, tools, sythe, weeding

A hand sickle is typically used for harvesting grain crops or cutting succulent forage chiefly for feeding livestock (either freshly cut or dried as hay). this one was used for cutting back bracken fern.Sickles were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots, for opening a path for the tractors and for clearing bracken. This item is an example of a tool used by the early settlers of the Orbost district.A wooden handled sickle used for fern cutting. It has a steel curved blade.Stamped on blade - RY4 MADE IN ENGLANDtool farming-implement sickle

A hacksaw is a fine-tooth saw with a blade held under tension by a frame. It is used for cutting materials such as metal or plastics. Hand-held hacksaws consist of a metal arch with a handle, usually a pistol grip, and pins for attaching a narrow disposable blade. A screw or other mechanism is used to put the thin blade under tension. The blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. On the push stroke, the arch flexes slightly, decreasing the tension on the blade.Steel frame for blade. adjustment lever in handle.Dimpled feature on curved sectionhacksaw, tool, ballarat school of mines, trade, cutting, metal, plastics

Diver's Knife, rare first class ca. 1900 (wooden handle) Siebe Gorman diving knife, two edge blade, and a push-in brass scabbard. The leather carrying strap is missing. The blade is imprinted Siebe Gorman & Co The blade is imprinted "Siebe Gorman & Co"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, diver's knive, knife, siebe, gorman

Fowlers Vacola manufactured home fruit and vegetable bottling/preserving outfits. This opener was used for breaking the seal and opening the metal lids on jars of preserves. [Fowlers Vacola Bottle Openers were advertised as late as 1955]Metal blade with white plastic handle."Vacola" inscribed on handle; "Fowlers Vacola Bottle Opener" engraved on blade.fowler vacola, vacola, preserves

Machetes similar to this example were issued as part of the USAAF emergency survival kits for B-2 and B-4 crew. This item was brought back from Korea by Flight Lieutenant Ian A. Lyons. Part of the Flight Lieutenant Ian A. (Joe) Lyons MBE Collection. See catalogue No 5374P for his service record..1) Machete with short slightly curved single-edged folding blade. Black riveted bakelite handle fitted with a thumb operated lock which secures the blade when opened. .2) Black metal detachable blade guard..1) Stamped on blade but partially obscured by corrosion: 'Ca?augus U.S.A.'machete, weapons, edged weapons, us army air force

Invicta cutthroat razor. The word "Invicta" is inscribed on the bakelite handle in gold and on the steel blade.The brand name Invicta on the blade and the handle.

A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb