Photographs, Black and White, of the MMTB bus 45? - large Garford Chassis - .1 - Front on view showing the radiator, head lights and other details including the crank handle - shows the destination of Brighton Rd. Registration Number 68945. .2 - Side on view of the bus showing the lettering, logo, doorways and destination "via High St". Photos Print and photograph by Sutcliffe of Cromwell buildings 366a Bourke St. Melbourne.In ink on the rear: .1 - "M&MTB Garford Bus No. 45 - late 1920's". .2 - "MMTB Large Garford Bus (Probably No. 45), Late 1920's and in pencil "Large Garford" KSK print numbers SA955 and SA956.trams, tramways, mmtb, buses, brighton rd, garford, tram 7

Fold out Lubrication Chart for Dodge Brothers Motor Vehicles. Printed in the U.S.A. on cream paper with black card measuring 21.1 x 14.0 for backing when it is folded. Chart has picture of the chassis, engine and wheels and is colour coded. Green for 500 miles or less, Blue for 1000 miles, red for 2000 miles and black for season. Each lubrication point has a circle where it is situated and a line to the name and which oil or grease.document, john bovaird collection - dodge lubrication chart, dodge brothers

Series of six black and white photographs of "MacDonald Johnston" street sweeper, City of Preston on a Ford chassis. Possibly the MMTB was looking at a similar model and ascertaining whether it would be suitable for sweeping and vacuuming sand off tram track. On the outside of the box has "Street Cleaning Preston CC - Truck Johnson" Based on the Registration plate - LMB - a 1974 plate - see https://en.wikipedia.org/wiki/Vehicle_registration_plates_of_Victoria accessed 24/4/2020trams, tramways, city of preston, trackwork, cleaning, rails, ford motor company, macdonald johnston, mmtb

The 'Bendigo Flee' car. Black and white photograph of a small van, possibly 1930s, with white painted words and phrases on the chassis. Include Bendigo, Sydney, Bathurst, Brisbane - Nothing but the best for the best, Atlantic is trouble free - the Artful Dodger - Sad Pat & Mick fill her up with Atlantic - Bertie the Bitza the one and only. Possibly involved in a motor rally sponsored by Atlantic Oil. On the reverse is printed in blue ink- Use Atlantic. See research field.bendigo, tourism, postcard, motor rally. atlantic union oil company., bendigo flee

The Double Deckers are built on Leyland TD5c chassis, with bodies by Leyland (1), Cheetham & Borwick (17), Martin & King (17) and J A Lawton & Sons (10) – a total of 45. The photo was taken at the Central Bus Garage North Fitzroy. All the DDs were ready for service in April 1940, but their issue to service was delayed due to the war effort to save fuel – continuing with the cable tram until the rope was almost worn out. They were not a success in Bourke St and were replaced by trams in 1955 and 1956.Yields information about the double deck bus fleet that was used to replace cable trams in Bourke St.MMTB Buses line up, prior to roll out in October 1940double deck buses, leyland, north fitzroy bus depot, bourke st, mmtb, central bus garage, td5c class, buses, world war ii

Set of three Black and White photos of unknown date and photographer: 1 - Photo shows MMTB AEC Mk III bus, on a Footscray route late 1970's doing the U-turn at the intersection of Queen and Flinders Street Melbourne. These bus chassis were built by AEC in the UK between 1951 and 1953 and bodied by Commonwealth Engineering (Comeng). This particular bus was tendered for sale in July 1980. 2 - Three MMTB Mk 4 buses stored at Clifton Hill depot prior to their sale Numbers 618, 604 and 607. All showing Clifton Hill. 618 has an advert for Bosch. The chassis for these buses were built in 1956 with the bodies by Lawton Pty Ltd of Adelaide. Buses 604 and 607 were offered for sale during July 1980. 3 - three Mk III buses, numbers 583, 584 and one other at a depot during the early 1980's which had been converted to ambulances for use during state disasters. Based on the reference 3rd reference document, there were four buses converted - 581 to 584 and were sold during 1980. (See Metlines -3/1990 - Reg Item 1185 for possibly a later conversion) Yields information about the buss that were used in Melbourne during 1960's and 1980's.Black and white photograph of: 1 - MMTB Mk III, AEC bus No 348 in Queen St Melbourne. 2 - Three MMTB Mk 4 buses at Clifton Hill depot 3 - Three Mk III buses that had been converted to Ambulances.trams, tramways, mmtb, buses, aec mk iii, footscray, commonwealth engineering, comeng, aec mk 4, bosch, clifton hill depot, ambulances, queen street

Set of four drawings, printed on A2 sheets with Melbourne, The Met, bus details, c1984. .1 - "Motor Bus Data" - listing class, make and type, seating, crush loading, turning circle, wheelbase, overall length, width and height. .2 - continuation of above. .3 - Bus seating plans for Leyland National, Volvo and MAN buses. .4 - Motor bus fleet - listing class, bus numbers, chassis, body maker, number of buses in service, stored and in fleet and capacity.trams, tramways, drawings, buses, class, the met

Churchill Island Heritage Farm has a large photographic collection dating from the nineteenth century to the present. Black and white photograph with white border showing a family sitting around a trailer parked behind Amess HouseCatalogue number written on reverse in pen/pencil Hand written on reverse in pen 'abt 1957 THIS IS THE TRAILER MADE FROM THE CHASSIS OF A OLD "STAR" MOTOR CAR. USED TO BRING UP PEOPLE AND BAGGAGE ETC FROM THE OLD JETTY ON CHURCHILL ISLAND OPPOSITE CHURCHILL RD. OUTSIDE THE S/E REAR ENTRANCE TO THE HOUSE'churchill island, landscape, harry jenkins

Bartram type AK, 5 HP horizontal cylinder water cooled magneto ignition oil Engine mounted on a metal and timber chassis with 4 wheels. It has its own cam driven water pump which pumps cooling water over metal gauze for evaporative cooling. Painted green. It has two flywheels, one at each end of the crankshaft, with a flat belt pulley attached to one flywheel. Cooling tank of galvanised steel with Bartram stencilled on one side. In working order.Cast nameplate on front of crankcase with a Bartram logo cast on also "Bertram / Type / AK"

Motorised tugs were used by ground crew to move aircraft on the ground.This tug is of historical significance to the B24-LiberatorMotorised Aircraft TugMERCURY TRUCK & TRACTOR CO LTD GLOUCESTER ENGLAND-Embossed figurehead of Mercury on front. The MERCURY TRUCK & TRACTOR CO GLOUCESTER , For Spare parts quote chassis no.4962. Tyre Pressure LBS.Per Sq Inch - Front 70 Rear 45 ON plate on Dashboard MORRIS COMMERCIAL embossed on gearbox housing. MT & T embossed on either side of radiator.

The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor

MMTB Tourist Bus No 79, Leyland TS8 chassis with the Canadian Carriage company body. The first photo shows a light livery when it was new in 1939 and the second a darker livery, the late 1940s. The first photo shows some possible damage to the front bumper bar. This was the second MMTB tourist bus. Imported by MMTB Chairman Bell from Canada in 1939. The body was built by the Canadian Car Co. Because of WW2, it was put into normal passenger service in July 1940 and had a mundane existence from that time onwards. It was sold to Melbourne Brighton Bus Lines however they never used it. See Reg Item 5112 for a photo of the bus in poor condition. Yields information about the second MMTB Tourist Bus.Set of two black and white photographs of the MMTB Tourist Bus, No. 79.tramways, buses, mmtb, tourist bus, leyland, canadian carriage company

The Bofors gun (which fired this round) was designed in the 1930s by AB Bofors, a Swedish arms manufacturer. It proved to be one of the most successful light anti-aircraft guns used during World War II. Apart from being used by most of the Allied forces, captured guns were used by the Germans and Japanese. The Bofors had a rate of fire between 80 - 100 rounds per minute when hand-loaded via 4-round clips. Effective maximum range was approx. 3,800m. On land, the guns were mounted singly on numerous types of chassis whilst Naval guns were either single or dual mountings. A few countries still use the Bofors Gun to this day.Brass case with iron/steel projectile

LU 600 the first of the Small Town Units, designed and built by the Country Fire Authority. (CFA) The late Wally Titheridge, Chief Mechancal Officer of the Country Fire Brigades Board, CFBB, and its successor the CFA, stated in an interview in the early 1990's that the vehicle was designed by himself, and built by a body builder in Preston. This was the first of many hundreds of the Small Town Units, on maily Austin, but also Bedford, Leyland, and BMC Chassis. The early series trucks had a 200 gallon (900 Litre) tank, which was proving usefull, but "more is always better" , so the next series had 400 gallon (1000 litre) tanks.

The Sanyo VHF colour television is thought to have been assembled in Wodonga, as Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the de-centralisation of industry and continued operation into the 1980s. The Sanyo Australia Pty. Ltd. factory in Wodonga opened in 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first ten years 350,000 televisions were assembled from Japanese parts, however by 1984 the number of staff had reduced to 112 and the factory closed in 1987. All Sanyo televisions were then imported from Japan. The Sanyo VHF colour television has local, state and national significance as it is thought to have been assembled in Sanyo Australia's factory in Wodonga. Sanyo was one of the international companies that set up business in Wodonga as part of the decentralisation of industry in Australia in the 1970s-1980s.Cream and black plastic Sanyo VHF colour televison, with the Sanyo logo and one large circular VHF control knob for the different channels on the proper left black plastic panel, and one small off-on volume knob at the bottom of the black plastic panel. The diagonal screen measurement is 30 cm or 11 inches."VHF" / SANYO / Telecolor / AFT / OFF-ON/ VOLUME" on the proper left black plastic panel on the front of the television. "75Ω- 300Ω" on the black part of the cable attached to the two antennas. "FOR YOUR SAFETY / Install any external / aerial to AS1417.1" on the back of the television. "SERIAL NO / 30207332" on the back of the television. "SANYO / MODEL CTP 2600 / CHASSIS NO. 79P-B5ZH 01 / AC 240V~, 50Hz, 85 WATTS / SANYO ELECTRIC CO., LTD. MADE IN JAPAN / WARNING / DANGEROUS VOLTAGE INSIDE / CHASSIS LIVE / CONTACT IS DANGEROUS / 3401901 B5ZH-B" on the back of the television. "SBS TELEVISION" stickers on both sides of the television. "WODONGA ASSEMBLED TELEVISION. (underlined) / This SANYO VHF COLOUR TELEVISION / Serial number AS1417.A (AS = Australia) / Model CTP 2600 was assembled / at the Sanyo Drive, Wodonga, factory Circa 1980, from Japanese parts." printed on a paper label attached to the upper back part of the television. sanyo, sanyo colour televisions, sanyo t.v.s, vhf t.v.s, sbs, wodonga, sanyo australia pty. ltd.

The Hallford truck was made by J & E Hall, of Dartford, England, whose business commenced in 1785. In 1926 the Fisher family of Mongan's Bridge took delivery of the 1923 Hallford truck which was used on the farm to transport cream to the Kiewa Butter Factory in Tangambalanga. In 1967, the truck was sold to Mr Greg Bedstead and other members of the Kiewa Valley Historical Society for the KVHS who reimbursed them at a later date. The truck was housed at the Butter Factory for many years and was paraded on special occasions. The truck was purchased for $380. It's chassis no. 2439 and the price included a spare chain. (Ref. E. Fisher on 18th Dec. 1969) The KVHS group who paid $50 each towards the Hallford truck were: T Pyle; James Grave; P & E. Barton; K Shoebridge; K Plenderleith and SK Pearce.refunded in 1971 Hallford truck. Fisher family. Kiewa butter factory. J & E Hall Company of England. E FisherBlack and white photograph of Paddy Fisher's cream truck loaded onto a tray truck at the Tawonga Caravan Park. Seven unidentified people on the tray truckSmall typed note attached to back of photo 'Paddy Fisher's cream truck at Tawonga caravan park. 13th December, 1969hallford truck, cream truck, fisher family, kiewa valley farmers, mongan's bridge

Photos shows a Melbourne, MMTB, double-deck bus painted in an all-over livery for the Buy Bonds Let's fill the 3rd Liberty Loan - World War 2 campaign. Has images of Winston Churchill and Australian Prime Minister John Curtain on the side of the bus. The bus is a Leyland TD5c type. In the background is a bus with a James Motors 1925 body, which were remounted on K6 International chassis in 1942 - 1943. Photographed at North Fitzroy Depot. These buses were used to replace the cable trams in Bourke St from October 1940. John Curtain became Prime Minister on 7 October 1941 and died on 5 July 1945. The paint shop record for buses (See Reg Item 126) gives the bus number 220, that it was painted from the 2nd to the 3rd Victory Loan in Jan. 1945 and then painted to green and cream in 8/1945.Yields information about a bus decorated or painted to promote the 3rd World War loan.Set of two photographs of a MMTB double decker bus advertising Buy the World War 2, 3rd Liberty Loan.tramways, buses, mmtb, double deck buses, john curtain, winston churchill, north fitzroy bus depot, world war 2, war loans, leyland, td5c class, central bus garage, bus 220

.1 - Tender document - Tender "O" 614 - 3 foolscap duplicated sheets (were stapled in the top left hand corner) - titled "Tender for the Purchase from the Board of Eighteen Second-hand AEC Mk III Motor Buses Complete", giving details of the bus numbers, engines, chassis, date entered service, body maker and general description. Third sheets gives MMTB's "Conditions of Tendering for the Purchased of Material from the Board." Tenders closed 7-7-1980. .2 - ditto - "O" 615 - titled "Tender for the Purchase from the Board of five (5) Second-hand AEC MK IV Motor Buses Complete", as above, with tenders closing 7-7-1980.trams, tramways, mmtb, buses, tenders, sales items

The Optacon OPtical-to-TActile-CONverter is a compact, portable reading aid for the blind. It is about the size of a textbook, and weighs less than 2kg. It works by converting a printed image into a tactile image that a blind person can feel with one finger. After a period of training and practice, a blind person can use the Optacon to read ordinary books, magazines, newspapers, and other printed materials. The Optacon was developed after intensive research at Standford University, California, USA and was trialed by clients of the Royal Victorian Institute for the Blind (now part of Vision Australia) in 1973. It has three main sections: 1 a miniature camera, 2 an electronics section, and 3 a tactile stimulator array. The miniature camera, about the size of a pocket knife, is mounted in a housing that has rollers for easy movement along a line of print. The camera is connected to the electronics section by a lightweight cable. The electronics section and the tactile stimulator array are in the main chassis. The array consists of 144 tiny metal rods arranged in six vertical columns and 24 horizontal rows. Each of the rods can vibrate independently. The tips of these rods protrude through holes in a concave finger plate where the index finger is placed flat in order to read. These three components act together to convert the image of a printed letter or other shape into a pattern of vibrating rods, a tactile image of the letter or shape. The letter shape is tactually perceived as an image that moves from right to left on the finger, showing the left or leading edge of the letter first. Letters are felt sequentially rather than all at once, and the image should be kept moving. The Optacon converts a printed O into a tactile form that resembles a crater with a vibrating rim -- a completed circle. C would have a gap or opening on the right side of the curve. The letter F would be felt, sequentially, as a vertical line with two trailing horizontal lines. Because it can convert any ordinary printed image into a corresponding tactile image, the Optacon is not restricted to any special typestyle or language. The camera has a zoom lens that compensates for differences in the size of type. The standard Optacon lens can accommodate type sizes from 6 point to 20 point. With the optional F4A magnifier lens, type sizes as small as 4 point can be read. Powered by a rechargeable battery, and comes with its own battery charger. The battery is contained within the main chassis, and is not removable by the user. There are four basic controls on the Optacon: the Magnification Adjustment zoom button located on the camera section on the side opposite the rollers; and the On-Off switch, the Stimulator Intensity Adjustment knob, and the Threshold Adjustment knob located on the right side of the front panel. The Circuit Breaker protrudes from the right-hand wall inside the chassis compartment. From left to right when the back panel is facing you, are located: the jack for connecting the battery charger; the Battery Check button; the Normal-Invert switch; and the Input/Output I/O connector for use with the Visual Display, when using the Repeater Cable to connect two Optacons to one another or with other accessories. Designed not be removed from the leather case during normal operation, the On-Off switch is a slide switch located on the right side of the front panel. It slides up and snaps into place in the on position. 1 black with orange front, rectangular device in leather case assistive devices, audio equipment

Letter, response and report on quarto paper - 10 sheets .1 - Letter from Frank Clancy, Historical Records Officer of the Commonwealth of Australia, Department of Supply (with Munitions over typed), to the MMTB dated 28/4/1950 asking for a summary of the Board's wartime activities. Letter response by Lewis Russell, MMTB Publicity Officer. Response dated 4/5/1950 saying the original letter had not been received, attaching further information. .2 - A second document (7 sheets) that was with the first, a response dated 3/8/48, primarily concerned with the provision of bus services to Munitions and aircraft factories, purchase of chassis, for buses, issues with supply, bus and tram numbers, services, Fisherman's Bend, patronage, tramcar construction and a table giving passenger numbers over the war period.In pencil and ink on top of the first sheet of 3843.2 - "Supplied to Official Historian Canberra 3/8/48" and a note "Affixed? by Foreman? 2/8/48"trams, tramways, world war 2, buses, munitions factory, fisherman's bend, workshops, commonwealth government

This Ford Handbook is in good condition. This book covers at least 97% of the instructions necessary for servicing the 1950 and 1951 models.Repair and Maintenance book covering all models of ford including V8, "60" and FORD SIXOn page 106 of the handbook there is, in handwriting, CABLE OPERATED BRAKES, Spring, Colour & Position Guide. Hand drawn picture with details marking the layout and details of the spring, colour & position.electrical, steering, ford, engine, transmission, accessory, ford owners, car repair, v8, 60, ford six, repair and maintenance, ford engine, clutch, body, chassis, shockers, cooling system, fuel system, suspension, rear, axle, brakes, shock absorbers, rear axle

Black and white (in cardboard) photograph of early Huntly bus. James Lerk 'A Cobb & Co coach body mounted on a motor truck, to serve as the Huntly to Bendigo bus. Photographed by Bartlett Bros'. Male passengers wearing suits, collars and ties, hats. Photocopy of reverse inscription, dated Bendigo Oct 1st 1926, reads - ' This picture represents an old Cobb & Co's coach. It is over sixty years old, and ran from Castlemaine to Swan Hill in the old coaching days, and afterwards ran from Bendigo to Inglewood. It was owned by Mr Shadbolt, and was purchased from him by Mr Bannerman of Huntly near Bendigo, who had the undercarriage taken off and the body placed on a motor chassis. It now runs between Bendigo and Huntly as a daily motor transport. It has never been painted since it was made.' See Research. Portrait (scan of photocopy) of William Bannerman attached.Bartlett Brosplace, transport, early bus, huntly bus; cobb & co.; bannerman, william dougal; shadbolt, alfred;

Set of two reports by Keith Kings, titled "The Privatisation of Melbourne's Public Transport - Has the wheel turned full circle? for the Second Annual RMIT Sir Robert Risson Memorial Lecture. See Reg Item 4679 for the first lecture by Graeme Turnbull. .1 - 12 A4 pages - Keith notes that it was the actual handout of the presentation. Two copies, one stapled. 2 - 20 A4 pages, single sides - copy of the initially drafted document. Both copies have handwritten notes about their origin and use. The lecture looks at early railway development in Melbourne, private operators, development of horse drawn buses in Melbourne, competition, bus chassis, body builders, operators, private suburban operators, tramway buses, cable tram MTOCo, tramway trusts, Government involvement, formation of The Met, PTC, V/Line, corporatisation of public transport, franchising, passenger expectations of public transport, Yarra Trams and the future.trams, tramways, buses, cable trams, mto co, public transport, competition, yarra trams, franchising, the met, ptc, tramways

Set of 7 manuals, documents, instructions regarding truck, bus, motors produced by Volvo. .1 - Volvo Truck facts – 88-89 - approx. 70 pages with diagrams, card covers. .2 - Volvo bus data sheet set - 9 foolscap sheets with data on chassis, servicing and general specifications. .3 - Lubrication recommendations for Volvo buses – post 1950 - Foolscap - approx. 40 sheets. .4 - Volvo Service bulletin – service intervals for oil and filter - single A4 sheet. .5 - Volvo service bulletin – Lubricating oil and recommendations - single foolscap sheet, .6 - Volvo turbo diesel and its Bosch injection system - manila folder containing about a 30 pages document titled "The Volvo TD100A Engine". .7 - Letter to MMTB 1977 re oils from Volvo Australia - correspondence - 10 sheets - dated 3/6/1977, with a note saying it does not answer the question.trams, tramways, volvo, buses, instructions, manual, equipment, maintenance

B&W photo of Ronald McDonald at Hermon's business in Dandenong on the occasion of the opening of McDonalds in Dandenong. Photo shows a group of people outside Hermon's Refuelling Station (a brick building with a shop and a workshop). A woman stands, holding the hands of two children, aged about seven. A person dressed as Ronald McDonald sits on the back of a sports car. Bill Hermon and a mechanic stand further along. There is a driver in the car. According to Lyn McGillivray, daughter of Bill and Jean, "It was hilarious! Mum & Dad were asked if Ronald McDonald could get changed in our premises. They were in awe that this 'big-wig' would want/need to dress there for the short journey up the street to the new restaurant. I think it was us kids (young adults then) who set them straight!" The car is most likely a Purvis Eureka, a kit car based on a VW Beetle chassis. They were manufactured in Dandenong from 1974 - 1991. Information supplied by Jarrod Drager via Facebook.

Cover letter from Birmingham City transport to W.Jack, of 23/1/47, forwarding photos and duplicated lists of buses, trams and trolley buses on 2 separate sheets. 153.1 - Foolscap typed sheet - Birmingham City transport letterhead - signature and stamp of General Manager. An "Associated Photo Engravers Ltd" adhesive label with "Birmingham City Transport - Empire House" typed over has been stuck over letterhead. Size - 330H x 203W. 153.2 - Quarto size sheet - duplicated - list of US (Nos. Reg. Nos, maker (Chassis and engine), year of make and type -both sides - dated 5/11/1946. Size - 242H x 190W. 153.3 - Foolscap sheet duplicated list of tramcars - car numbers, number off, trucks, maker and type of motor, year of make and number withdrawn. Trolley buses - bus numbers, registration number, make. Typed and date in service. Dated 21/1/1947. Images of documents added 5/9/2013. Sticky label on letterheadtrams, tramways, birmingham, uk trams, buses and trolley buses