This original set of medals and memorabilia were donated/bequeath to the Beechworth RSL Sub-Branch by Captain Nankervis’ family. The inscription on the framed box containing the Medal Bar reads, “These medals were awarded to Captain Dick Nankervis for service during World War I and World War II. Part of the Nankervis Collection, there is a lengthy word document in the Media Section6 Court Mounted WWI and WWII medals; laid on green felt, in a wooden display case Measuring 300mm x 220mm with non reflective glass front and metal bar with an engraved inscription Metal Bar measuring 20 x 160 mm engraved with "This original set of medals and memorabilia were donated/bequeath to the Beechworth RSL Sub-Branch by Captain Nankervis’ family. The inscription on the framed box containing the Medal Bar reads, “These medals were awarded to Captain Dick Nankervis for service during World War I and World War II". wwi war medals, wwii war medals, rack of six medals, military medal

Framed colour Photograph of a Plaque and Display Case " THE PEOPLE OF THE UNITED STATES OF AMERICA PAY TRIBUTE TO THOSE MEMBERS OF ITS ARMED FORCES WHO SERVED HONORABLY IN SOUTHEAST ASIA DURING THE VIETNAM CONFLICT"photograph, us military

Black and white photograph. Cohn Bros. Brewery Exhibit at the Victorian Gold Jubilee Exhibition Bendigo 1901 - 1902. This photograph also includes a small display case at the right for Prescott Jewellers, Bendigo. Cohn's display shows tiered bottles, some small barrells in a rotunda. Prescott's exhibit - goods in glass display cases. Inscriptions in image: 'Cohn Bros', 'Prescott Jewellery, Bendigo, 'Highland Club, Whiskey', 'cordial', 'Scotch Whisky' 'DCL' Previous Acc. No. 'MP 271', Card Index 'Cohn Brewery Show Exhibit'organization, business, cohn bros. limited, cohn bros limited

In 2010, the Government announced that the ETV fleet would be no longer be funded by the MCA from September 2011, saving £32.5m over the Spending Review period. The Department stated that "state provision of ETVs does not represent a correct use of taxpayers money and that ship salvage should be a commercial matter between a ship's operator and the salvor".Two days after the announcement that the fleet was to be disbanded, Anglian Prince was sent to the aid of the UK's newest and largest nuclear submarine HMS Astute, which ran aground off the Isle of Skye in Scotland during sea trials. 1977 owners became Cape Otway Ltd, same managers 1978 Owners became Otway Shipping Co LTD, same managers August 1981 Returned to owners and bareboat chartered to the Australian National Line 1987: Sold, k/s Hansa Bulk 2. Barber International A/S managers. Renamed HANSA MARINER. Norway flag 1988 Sold K/S Stamariner. Helmer Staubo and Co Managers, renamed Stamariner. Norway (NIS flag) 1993: Sold Shipping Enterprise, renamed Tamarine, Malta flag 1998: sold renamed Andromechi 1998: Sold, Golden Union Shipping Co S.A Panama flag, renamed Flag Braveheart 2000: sold, Flag Sofia Shipping Company Ltd. renamed Flag Sofia. Malta flag. November 15th reported as being on fire at St Petersburg. Damage to the Officer's dining room, laundry and alleyways 2002: Sold Emirates Shipping Corporation Ltd. Emirates Trading Agency LLC, managers. Renamed PEARL OF ASMAN then amended PEALR OF AJMAN. Malta Flag 2003: March sold for scrap to ship breakers in BangladeshShip builder's model of the bulk carrier Cape Otway IMO 7520229 built by Misui Engineering & Shipping Co. The burgundy and grey hull beneath a deck with detailed fittings and superstructure, presented within a glazed display case. On base of case: " M.V CAPE OTWAY/ OWNER : LYLE SHIPPING CO., LTD/ BUILDER : MITSUI ENGINEERING & SHIPBUILDING CO., LTD CHIBA WORKS/ BUILDER'S NO.: 1093/ CLASS: LLOYD'S REGISTER OF SHIPPING/ DEADWEIGHT...32,504KT/ LENGTH (OVERALL)... 179.000M/ LENGTH (P.p) 170.000M/ BREADTH (MLD)... 14.800M/ FULL LOAD DRAFT (EXT)... 10.677M/ MAIN ENGINE: MITSUI B&W 7K 74EF X 1 SET/ M.C.O.: 13,100 BHP X 124 RPM/ C.S.O: 11,900 BHP X 120 RPM/ TRIAL MAX. SPEED: 17.50 KTS 9AT = 17,870 KT, M.C.O.)/ DELIVERED : DECEMBER, 1976/ SCALE: 1/200" On model: "CAPE OTWAY/GLASGOW"

This model of the ship H.M.S. Lady Nelson was researched and built as the vessel Lady Nelson by David Lumsden, a professional ship model builder. His Majesty's Armed Survey Vessel Lady Nelson was commissioned in 1799 to survey the coast of Australia. This vessel was purpose-built before the British Admiralty requested plans for a Schooner for Port Jackson. At the time large parts of the Australian coast were unmapped and Britain had claimed only part of the continent. The British Government were concerned that, in the event of settlers of another European power becoming established in Australia, any future conflict in Europe would lead to a widening of the conflict into the southern hemisphere to the detriment of the trade that Britain sought to develop. Against this background, Lady Nelson was chosen to survey and establish sovereignty over strategic parts of the continent. Lady Nelson left Portsmouth on 18 March 1800 and arrived at Sydney on 16th December 1800 after having been the first vessel to reach the east coast of Australia via the Bass Strait. Before that date, all vessels had sailed around the southern tip of Tasmania to reach their destination. Lady Nelson's survey work commenced shortly after she arrived in Sydney, initially in the Bass Strait area. She was involved in the discovery of Port Phillip, on the coast of Victoria, in establishing settlements on the River Derwent and at Port Dalrymple in Tasmania. She also successfully chartered much of the Victorian coastline and was heavily involved with the exploration of the Queensland coast with Matthew Flinders; investigated the Hunter River; made numerous visits to New Zealand and Norfolk Island and was involved in the founding of numerous settlements. In comparison to most colonial vessels, the Lady Nelson was technically unique she was fitted with sliding keels, or centreboards, and water-tight trunks reaching to the deck. Captain Schank invented these sliding keels that, when raised, reduced her draught to less than six feet. Her life as an exploration vessel ended while accompanying HMS 'Tamar' to Melville Island in 1825, the 'Lady Nelson' was captured and later abandoned by pirates off the island of Babar (Indonesia). This brought the vessel's 25 years of coastal exploration and navigation to a close.The Lady Nelson made was the first British ship to survey of the southern or south-western coast of Australia and traverse the Bass Strait. The vessel holds a special place in Australia's history of exploration as the first to explore and establish settlements in the then-new British colony of Van Diemans Land. The model gives an insight into what life must have been like onboard sailing vessels of the time and Australia's early history of establishment and exploration. This model acts as an important legacy of the full-scale ship which no longer survives. Ship model of the 60 ton British brig HMS Lady Nelson. Timber model of a two-masted brig with rigging but no sails, displaying the British Union Jack flag. The ship is in a glass exhibition display case on metal stand. HMS Lady Nelsonflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, by captain john schanck, sliding keels or centreboards, lady nelson, british brig hms lady nelson, david lumsden ship model builder, lieutennant james grant, bass strait discovery, surveying king island and port phillip bay, philip gidley king

Found at POW camp 13 site post war by war time camp guardBrass button with Australian Military Forces around front edge, map of Australia in centre with a crown above. Has a brass loop on the back to attach to clothing. Contained in a black material covered display case with gold around edge.on front: Australian Military Forces and a map of Australia and crown. on back P J King Pty Ltd Melbbrass buttons, camp 13, military uniform accessories

Laminated A3 fawn coloured poster for use in tram roof ad racks, featuring Souvenirs available for sale on the tram and making reference to display cases. Includes drawing of tram 33. Image added 20-12-2016.trams, tramways, btm, posters, roof ads

Original ship - 11,741 gross tons. 589' x 70' x 30' (179.5 x 21.34 x 9.14m). Oil tanker built by Eriksberg Motor Vessels at Gottenburg, Sweden in 1951 for Hjalmar Bjorge of Norway as the Storheim. Purchased November 1964 and renamed R W MILLER. Had a crew of 39 seamen, including the officers. 1973 sold to Independent Shipping Company Pty Ltd of Singapore. Renamed Cherry Victor. Scrapped 1979. Robert Miller traded under the name R W Miller and Company from early 1912. One of Miller's first contracts was to pick up overburden and spoil from the sinking of the Balmain Colliery shaft and dump it at sea. Miller saw the opportunity to sell this material and he ended up getting a sixpence a ton from a local council and other contractors for use as road bases and building foundations. This close association with coal led to Robert W Miller on 15th January 1913 being given the contract for coal distribution from Sydney Harbour Colliery (Balmain mine). So began a long association with coal. Miller built a fleet of lighters that were used to transport blue metal, sand and coal around Sydney Harbour. This introduction into coal transport opened a prospect for him to enter the larger coal shipping transport. During 1917 Miller purchased a vessel, the taking over 1985 by Howard Smith Industries Pty Ltd, Melbourne. Build date 1951-1979. Ship builders model of the tanker R W Miller in a glass case. The body is painted in colours of maroon, green and grey, the deck with detailed fittings and superstructure, an Australian merchant flag flying from the stern, within a mahogany framed glazed display casePlaque at foot of model: M/T R.W. MIILRT/ BUILT GOT. 1951/ OWNERS R.W. MILLER & CO. PTY. LTD/ LENGTH OVERALL 559.04"/ LENGTH BETWEEN P.P 526.06"/ EXTREME BREADTH 70.00"/ MOULDED DEPTH 39.03"/ DEADWEIGHT TONNAGE 18,500/ MACHINERY B & W TYPE A I.H.P 7, 600" on model: "R.W Miller" painted in black

MILLERS CANOPUS As Merchant Knight (1952-63), Millers Canopus (1963-66), Lsoo Vung Tau (1966-?). In late 1963 Roderick W. Miller, with Commonwealth Government approval, purchased this tanker in Japan to enter the petroleum transport trade in opposition to overseas interests. Extensive modifications at Singapore ship yards upgraded the ship's facilities to meet Australian Seamen's standards. Renamed Millers Canopus, and had a crew of 42 seamen, including the officers. Sold mid 1966 to the Luzon Stevedoring Co Phillipines. Renamed Lsoo Vung Tau. No further details known.Formerly part of the collection of Howard Smith Ltd.Ship builders model of the tanker R W Miller in a glass case. The body is painted in colours of maroon, green and grey, the deck with detailed fittings and superstructure, an Australian merchant flag flying from the stern, within a mahogany framed glazed display caseplaque on base of model "MODEL BY I R AMIS LIMITED/ LONDON S.W. 20." Second plaque: " M.V MILLERSCANOPUS/ D/WT 15330 TONS/ DIMENSIONS 475' 0" B P X 67' 4 1/2" B.M X 37' 4" D.M./ BUILDERS-MESSRS SIRE JAMES LAING & SONS LTD. SUNDERLAND/ OWNERS - R.W MILLER & CO. PTY. LTD. SYDNEY/ YARD NO. 796/ 1952" on model: "MILLERS CANOPUS" painted with white

100 coins areas shown in large wooden display case. Featuring Australian and English pennies some dating back to the 19th century. Also features a small plaque. Outside of case features two Melbourne Harbor Trust Crests. Accompanied by a handwritten card.

Model of the Era. Oil tanker built by Samsung Ship Building and Heavy Industries Company in South Korea. Completed January 1987. 1985 officially under ownership of Howard Smith Industries Pty Ltd, Melbourne with take over of R W Miller. 1996 transferred to Intercontinental Ship Management. Scrapping began at Alang January 2002. 54 880 gross tons Length overall: 229.732 m (758 ft) Beam (MLD): 46 m (151 ft) Depth (MLD): 19.2m (46 ft) Draught (design): 12.17 m Draught (Scantl): 13.6 mShip builder's model of the tanker Era IMO 8420218 built by Samsung Shipbuilding & Heavy Industries Co. - Moulded polyurethane hull painted in colours of black and maroon, the deck with detailed fittings, machinery and superstructure, presented within a perspex display case. Scale 1:200plaque at foot of model: "95,000 DWT CRUDE/ PRODUCT CARRIER/ PRINCIPAL DIMENSIONS/ LENGTH O.A 229.732M/ LENGTH B.P 220.000M/ Breadth (MLD.) 46.000M/ DEPTH (MLD.) 19.200 m/ DRAUGHT (DESIGN) 12.170 M/ DRAUGHT (SCANTL.) 13.600 M/ SHI SAMSUNG SHIPBUILDING &/ HEAVY INDUSTRIES CO., LTD./ SCALE OF MODEL 1:200" White pen written on base: "PWO 2666.4/ 110/97/S4" Label affixed to base: "104226" on model "ERA MELBOURNE/TUG/TUG/TUG/NO SMOKING/NO SMOKING/ ERA"

The horseshoes in this purpose-built display case were made by Thomas Alfred Chapman in 1906-1907. Chapman operated a blacksmith’s shop in Mortlake Rd, Purnim, about 15 mins drive from Warrnambool. Chapman made this horseshoe case especially for the 3rd Exhibition of Australian Manufacturers and Products, held in the Exhibition Building in Melbourne, which was organised and promoted by the Australian Natives Association (ANA). Reference is made to the horseshoe case in the Exhibition’s Souvenir Catalogue of 1907 on page 85, under the heading 'In the Machinery Section the following exhibits are also shown … 'CHAPMAN, T.A. , Woolsthorpe, via Warrnambool, Case of Horseshoes'. The Australian Natives’ Association (ANA) were a non-partisan and non-sectarian, friendly society founded in Melbourne, Australia in April 1871. It was set-up for the benefit of Australian-born white men, and membership was restricted exclusively to that group. Men of other races including the Chinese and Indigenous people were not allowed to join. The ANA had relatively progressive views on women (for the time) and attracted suffragists seeking support for their cause, and in 1894, the ANA advocated for women’s enfranchisement. Although, white women were only admitted as members from 1964. The organisation was most prominent in Victoria and sought to shape Australia’s national identity and was a training ground for businessmen, trade unionists and politicians including many of Australia’s early prime ministers such as Edmund Barton, Alfred Deakin, James Scullin and Francis Forde, and the first Australian-born governor-general, Isaac Isaacs, was a member. By 1910 it had developed into a nationwide association with real political and social influence, and members would participate in many activities. The ANA lobbied strongly for anti-Chinese legislation and were an ardent believer of colonial unification. Its mission and efforts are largely credited for the successful referendums that resulted in Federation of the six Australian colonies into a new nation, the association’s most important legacy. The ANA was also a supporter of trade protection, and were a staunch advocate of the first act of Australia's new parliament, the Immigration Restriction Act 1901 (cth) or commonly known as the White Australia Policy, which became one of the central pillars of Australian nationalism in the 20th-century. The ANA campaigned against the Australian Federal Government's new immigration policy after the Second World War (non-British immigration from southern and central Europe) in order to maintain a 'white Australia', and resisted changes when the Labor government during the 1970s fully dismantled and abandoned the White Australia Policy. The ANA merged with Manchester Unity Independent Order of Oddfellows, in 1993 to become Australian Unity Ltd. The display case of horseshoes changed hands several times, going from its maker Thomas Chapman to his mother then various other members of his family. The case was also displayed at the Lee Family’s butcher shop at 188 Liebig St Warrnambool, and in the Purnim Hotel during the Warrnambool May Races. In the late 1950s the horseshoe case went to Thomas’s son, Brian. He was a Master Farrier and completed his apprenticeship at Flemington Racecourse, and in Warrnambool he owned a blacksmith business at the Warrnambool Racecourse Grounds. Brian later operated a blacksmith’s at Flagstaff Hill, where his customers would bring their horses to be shod. Brian passed away in August 2017. The horseshoe case is significant as an example of trades in the early 20th century in Western Victoria, Australia. It is also significant as an example of horseshoes from the early 20th century. The horseshoe display case is also significant for its association with the Australian Exhibition of 1907, showcasing Australian produce and manufacturing to the world. The horseshoe display case is locally significant for its association with local families, essential businesses and community events. Display case of homemade horseshoes. Wooden case with glass front containing 16 horse shoes grouped in sets, each set with a label: Made 1906-1907 for Australian Exhibition of 1907 by Thomas Alfred Chapman of Warrnambool. The case contains (a) complete chrome set each of Trotting Shoes, Hunting Shoes and Racing Plates, and (b) one pair of Hind Polo Shoes and one pair of Front Aluminium Shoes. The wooden frame has gold lettering on each side proclaiming “Australian Natives Association, T.A. Chapman, horse shoer, Warrnambool” and is topped by a painted Australian coat of arms. Gold lettering on frame, in the order of top/bottom/ left/right “AUSTRALIAN.NATIVES.ASSOCIATION / T.A. CHAPMAN / Horse Shoer / Warrnambool”flagstaff hill, warrnambool, shipwrecked coast, maritime museum, shipwreck coast, horseshoe display case 1906-1907, chromed set of trotting shoes 1906-1907, chrome set of hunting shoes 1906-1907, chrome set of racing plates 1906-1907, pair of hind polo shoes 1906-1907, pair of front aluminium shoes 1906-1907, australian exhibition 1907, australian natives association (ana), t.a. chapman horse shoer warrnambool, thomas alfred chapman, brian chapman, brian “snacks” chapman, blacksmith warrnambool, warrnambool may races, warrnambool racecourse, purnim hotel, lee family’s butcher shop warrnambool

Hakata doll was given to RACS as a gift from the Japanese College of Surgeons. Made by Tomi Kono for Kyugetsu,Toyko. Kyugetsu is a famous doll store in the Asakusabashi district of Tokyo. This was founded in the Edo period and has been making dolls for 150 years.This elaborately costumed ceramic doll has its origins in simple clay figurines first produced in the Hakata district of the Japanese city of Fukuoka in the 17th century. They made their appearance in the West at the Exposition Universelie in Paris in 1900 by which time they had been transformed from toys into an artform. Most dolls are inspired by figures from the theatre: Noh, Kabuki and Ukiyo-e. These figures are sometimes connected with Geisha dolls although this is not necessarily a correct description. The robes and hairstyle are traditional but not confined to geisha.Hakata Doll dressed in elaborate kimono, in glass display case. Wooden plaque in cabinet with Japanese characters/script - presumably describes the doll. Doll has porcelain face, hands and feet, and a cloth body. This doll depicts a young unmarried woman dancing and holding an elaborate drum (tsuzumi).On plaque in cabinet: "Japanese College of Surgeons. Founded in 1974"hakata, diplomatic gift, japanese college of surgeons

2 display cases from the museum, possibly made from Victorian hardwood seasoned at Newport.Shown in old museum photosSeasoned hardwood display table with glass top.victorian school of forestry, vsf

Ballarat Vintage tramway sales poster for use in tram roof ads - laminated fawn coloured sheets, advertising sales items and display cases - backed onto heavy cardboard, orange coloured - underside would have been a poster for other older sales items. Image added 20-12-2016.trams, tramways, btps, posters, sales, roof ads

Boyd designed the exhibition for the opening of the Australian Chancery in Washington DC held in June 1969. He designed six cylindrical clear acrylic display cases. One of these exhibits used an anamorphic optical illusion, using compressed images which had normal proportions when viewed through a lens of the half-cylindrical display cases. These bookends were designed as a small scale model for the Chancery exhibition. Placing the disc (item F158) underneath the adjacent two half-cylindrical bookends demonstrates how the bookends behave as a lens.Two half cylindrical acrylic prismsaustralian chancery, walsh st furnishings, robin boyd, ohm2022, ohm2022_3

This volume of the Sacred Law was presented to the Ballan Shire Historical Society on the 30th September 2009, following the closure of the Ballan Masonic Lodge No. 205 on the 9th February 2009. The Bible is assumed to have served the Lodge from it's Consecration on the 15th February 1908 until the Lodge closed. It was presented to the Society in a timber display case with a glass cover containing as well the Masonic Compass and Square and a plaque reading "Donated by Ballan Lodge No. 205 on the Return of the Warrant, February 2009". The display case measures 60.5cm wide, 59cm deep and 19.5cm high.A black leather covered copy of the King James version of the Holy Bible, holy bible, masonic lodge

Boyd designed the exhibition for the opening of the Australian Chancery in Washington DC held in June 1969. He designed six cylindrical clear acrylic display cases. One of these exhibits used an anamorphic optical illusion, using compressed images which had normal proportions when viewed through a lens of the half-cylindrical display cases. The bookends (item F157) were designed as a small scale model for the Chancery exhibition. Placing the disc (item F158) underneath the adjacent two half-cylindrical bookends (item F157) demonstrates how the bookends behave as a lens.Photocopy of a image on a transparencyaustralian chancery, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Chicago Federal Center, Chicago, Illinois, USA, 1958-1974. (Architect: Mies van der Rohe.)Made in Australia / 13 / JUL 69M2 / Encircled 15 (Handwritten)slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Construction of Roman House on right, Barbican Centre, London, England, 1965-76. (Architects: Chamberlin Powell & Bon.)Made in Australia / 20 / JUL 69M2 / Encircled 34 (Handwritten)slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Thamesmead Estate, London, EnglandMade in Australia / 8 / JUL 69M2slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Crysler building in the distance, New York, New York, USAMade in Australia / 7 / JUL69M2 / Encircled 20 (Handwritten)slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Interior of the Ford Foundation (1967) New York City, New York, USA. (Architects: Kevin Roche & John Dinkeloo.)Made in Australia / 3 / JUL 69M2 / Encircled 21 (Handwritten) / Encircled 24 (Handwritten-Cancelled)slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Construction of Barbican Centre, London, England, 1965-76. (Architects: Chamberlin Powell & Bon.)Made in Australia / 17 / JUL 69M2 / Encircled 27 (Handwritten)slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Honolulu, Hawaii, USAMade in Australia / 36 / JUL 69M6hawaii, slide

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Honolulu, Hawaii, USAMade in Australia / 33 / JUL 69M6slide, robin boyd

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Honolulu, Hawaii, USAMade in Australia / 1 / JUL 69M6slide, robin boyd