Forms part of First Aid equipment as utilised by Australian Forces during WW2.Typical basic First Aid equipmenr available to Australian Military Forces durung and after the Second World WarParcel that is sandy brown in colour with black letteringFirst Field Dressing with instructions on use Johnson and Johnson.

non-fiction...

Johnson Brothers were a British tableware manufacturer and exporter that was noted for its early introduction of "semi-porcelain" tableware. It was among the most successful of the Staffordshire potteries which produced tableware, much of it exported from the 1890s through the 1960s. They were also important manufacturers of large bathroom ceramics. The company was founded in 1883, but from 1968 to 2015 it operated as a part of the Wedgwood Group. However, after the Wedgwood Group was acquired by Fiskars in 2015, the production of Johnson Brothers was discontinued. The company's name derives from the names of the company's founders. The four original "Johnson Brothers" were Alfred, Frederick, Henry, and Robert. Their father married the daughter of a master potter, Alfred Meakin. In 1883, Alfred and Frederick Johnson began production at defunct pottery, known as the Charles Street Works, that they had purchased at a bankruptcy sale in Hanley, Stoke-on-Trent. At first, they specialised in the manufacture of durable earthenware, which they called "White Granite". The success of this venture led to rapid expansion. In 1888, the Rev. Henry Johnson joined them, followed ten years later by a fourth brother, Robert Johnson. Having established a solid reputation producing basic "whiteware", the company developed a product known as "semi-porcelain", a range of pottery that had the characteristics of fine china, but the durability of ironstone ware. This kind of tableware soon became very popular in the United States due to its durability and low cost. In 1889, the Hanley pottery was opened, later the Alexander pottery, and in 1891 the Imperial Works Pottery. In 1896, the Trent Sanitary Works was opened for the production of non-tableware products, and Alfred Johnson left the business to establish his pottery. By 1898, Robert Johnson had relocated to New York City to manage Johnson Brothers' rapid expansion into the North American market. An item that gives a snapshot into the emerging market for tableware that was reasonably priced and serviceable. The company produced "whiteware" but the innervation of the pottery line called semi-porcelain changed the industry. This allowed potteries to produce fashionable pottery items that were affordable to all social classes of the time. Bowl white ceramic decorative with floral decoration around lip. On base, "Royal Ironside China, Johnson Bros England" & crest of lion and unicorn flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, bowl, china bowl, lion and unicorn crest, table ware, kitchen ware, white ware, johnson brothers

Peter Johnson was President of St Kilda Historical Society 2010-2015. The photograph was taken during a survey of St Kilda Park Primary School Tower, Fitzroy Street, St Kilda on 27/11/2001Colour photograph, unmountedst kilda park primary school, peter johnson, schools, st kilda historical society, skhs

This story was written by Brenda Johnson and details her time in Orbost from 1959 -1966 settling on land at Lake Road in Newmerella.This book is a useful and interesting reference tool on life in Newmerella in the mid 20th century.A thin stapled paperback book of 31 pp. It is titled "The Orbost Story 1959 to 1966 Lake Road Newmerella Victoria". The cover is shiny silver with black print. In the centre is a black/white photograph of the block with numbers ( 2 3 ?) carved into a tree. There is a Land Rover in the background.Stapled inside back cover - "Bob Johnson" with telephone details and email address.newmerella-history johnson-brenda rural farming

This First Field Bandage is dated 1942 and is thought to have been carried by a member of the Military Forces during WW2.This First Field Dressing is Original it appears to have been carried by a member of the Military during WW2.An oblong shaped gauze bandage in a cotton cover (First Field Dressing), the outer cover is well worn buff colour.The Dressing was made by Johnson and Johnson Pty Ltd Sydney November 1942.first field dressing, ww2, 1942

This is a coin shaped gold coloured medal sitting upright on top of a small plastic pedestal. On the front the coin contains representations of leaves, and a white cane across the top. Around the sides is an inscription: ' Alex Johnson Memorial Medal for devoted service to the blind' and across the bottom 'Blind Workers Union of Victoria'. On the back is inscribed in signature style ' Hugh H Jeffrey' 1972' inside a circle of leaves. 1 coin shaped medal on pedestalawards, hugh jeffrey

Plastic square container with round lid. The lid twists and has holes to dispense the talc powder. Contains 100g net. On the back is printed a barcode with directions for use, caution alerts and ingredients. Customer service free call, information. Trademark J&J 1993Johnsons Baby (clinically proven mildness) powder, Johnson and Johnson 100g net. J&J on lid. On base ACI 316 1 Recycle symbol 2.

st paul's cathedral, st paul's, memorial service, connie, constance johnson, connie johnson, love your sister, village, villagers, cancer, charity, samuel johnson

Mr George Awburn Jr. arrived in Wodonga West with his parents by bullock dray when he was aged six years old. As a young man he went to Melbourne where he worked with the Melbourne Tramway and Omnibus Company. He drove the first through tram from Abbotsford to Balaclava. On he return to Wodonga, Mr. Awburn opened a bakery and grocery business in Sydney St., Wodonga which he conducted up till the time of his death in 1946. He was active in community affairs in roles including being a foundation member of the Library Committee, a committeeman of the Town Band and football club, a member of the Hibernian Lodge and an ardent worker for the Roman Catholic Church. Johnson Bros. was founded by two brothers named Alfred and Frederick who purchased a pottery factory in Hanley, England, in 1883. They were grandsons of a renowned English potter, Alfred Meakin. They were later joined in the business by their brothers Henry and Robert. Their business grew rapidly, as they were one of the world's largest pottery factories by the turn of the 20th century. By 1970, Johnson Bros. obtained the Royal Charter to become the official provider of china for Her Majesty Queen Elizabeth II. More than 1,300 patterns have been created throughout Johnson Brothers' history. Due to their growing success, manufacturing plants were established overseas including the establishment of a tableware factory, Johnson Brothers Australia in 1957 in Croydon, Victoria operated through a company known as Sovereign Pottery Ltd. Due to rising competition, Johnson Brothers became part of the Wedgewood Group in 1968. In 2015, following the acquisition of Wedgewood by Finnish company Fiskars, the Johnson Brothers branding was discontinued. The trademark on this bowl was used by Johnson Brothers between 1913 and 1942.This item originates from a well-known and respected Wodonga business.A round china plate imprinted with business name of G. Awburn Wodonga and Johnson Brothers on the back of the plate.On front: G. Awburn Caterer Wodonga On back: Hotelware / Johnson Bros/ Englandawburn family, wodonga businesses

A steam boiler like this late 18th century boiler, is often called a colonial boiler. Steam boilers were used in factories throughout Australia, mounted over similar designs of brick furnaces. This heat from the fire travels through the tubes in this fire tube boiler and the water heats as it circulates around them. Another kind of boiler is a water tube boiler, in which the water is inside the tubes and the heat of the combustion surrounds the tubes. The boiler in our collection burned wood as fuel but others of this design could also burn coal, coke, gas and liquid fuels. The boiler was made by T & F Johnson, boilermakers. In 1922 their factory was located at Coventry Street, South Melbourne. They were still advertising their 'Colonial, multi, vertical boilers, all sizes' at the same address in 1934. The connected pressure gauge, made in London by Dewrance, measures 0 to 400 pounds per square inch. John Dewrance is renowned as a pioneer of the steam locomotive in the early 19th century. He founded John Dewrance & Co. in South London in 1844. His son Sir John Dewrance took over in 1879. In 1939 the company became a subsidiary of Babcock & Wilcox, and was eventually owned by Emerson. How the boiler works: - A boiler is about two-thirds filled with water and heat is applied, in this case in the form of burning wood. The heat is transferred through the metal of the boiler to the water. When the water boils the steam rises to the top, and as it escapes from the boiler the steam pressure builds up in the steam space to later be released to do work; drive machinery such as ship and train engines, turbines, presses, wheels, and driving belts to operate looms and saws. The heat associated with the boiler can be used for preserving food, sterilising, factory manufacturing processes, and steaming wood for shipbuilding. Every boiler has several components fitted for safe operation: - - Safety valves - Gauge glass - Pressure gauge - Main steam stop valve - Water check valve - Blowdown valve - Manhole doorThe boiler is a significant item that gives us a snapshot of early Melbourne's industrial history. It is an example of the technological advancement during the Industrial Revolution where steam-driven machinery and motors could perform tasks more efficiently than manual labour. The makers were one of many boilermaker businesses in Melbourne during the early late-19th andearly 20th centuries. The maritime trade and skills of boilermaking are still learned and applied today. The Dewrance steam pressure gauge connected to the boiler was made by the London firms foundered by John Dewrance. He was renowned for developing the steam locomotive in the early 19th century.Boiler; a horizontal cylindrical underfired steam boiler. It is a multi-tubular design and is timber plank-clad, with brass fittings and pressure gauges. The boiler has an iron door at one end with a metal chimney above it. It is installed over a brick-enclosed solid fuel furnace. Two large, wood-mounted pressure gauges are connected to the boiler and have inscriptions. An inscription is on a red, cast iron plaque above the boiler door. The boiler's maker is T & F Johnson, South Melbourne. One of the pressure gauges was made by Dewrance, London..Maker's plate: "T & F JOHNSON / BOILERMAKERS / SOUTH MELBOURNE" Pressure gauge: "POUNDS PRESSURE / PER [square] INCH / DEWRANCE LONDON"flagstaff hill, warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, boiler, multi tube boiler, steam boiler, steam technology, underfired boiler, horizontal boiler, timber clad boiler, steam power, industrialisation, boilermakers, south melbourne, dewrance, john dewrance, pressure gauge, dewrance pressure gauge, t & f johnson, london, steam engine, steam locomotive, pounds per square inch, 19th century, steam machine, johnson tyne foundry, colonial boiler, fire tube boiler

Tan coloured cotton package containing dressing. Instructions for use written on outside.Commonwealth of Australia Shell Dressing. Extensive directions for use. Johnson & Johnson P/L Syd October 1941field dressing, shell dressing, sas

Most surgical wounds are closed primarily, but some are allowed to heal by secondary intention. This usually involves repeated packing and dressing of the raw wound surfaces. Although the long-term care of such wounds has devolved to the care of nurses in the community or out-patient setting, the initial wound dressing or cavity packing is done by the surgeon in the operating theatre. Many surgeons are unaware of the growth of the discipline of wound care, and still use traditional soaked gauze for dressing and packing open surgical wounds and cavities. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC1963638/The control of bleeding and wound management is vitally important for the survival of the patient.Gauze bandage and cardboard box.Two boxes. One box in better condition. Red Chain Bandage. Johnson and Johnson Pty Ltd Sydney. 3 inches, 6 yards. Sterilized neat edge.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, "red chain bandage", gauze, bandage, johnson & johnson

1 box 12 corn plasters;1 metal stand with glass lamp with 1 wick.Box labelled "Johnson & Johnson" , "MADE IN ENGLAND" "THICK" "CORN P". Distributers label - "SAMBELL'S Cnr. Pharmacy/ WARRNAMBOOL"medicine, corn plaster

field dressing carried by a soldier as part of their field kit to enable immediate first aid in battleItem was part of first aid equipment that all soldier carried when on active war like duties in WWII. First Field Dressing unpacked from original container. Bandage in waterproof package with safety pin in waterproof wrapping attached by cotton thread. Red arrow diagonally across package indicating where to open. Printed on waterproof wrapping. FIRST FIELD DRESSING/ Tear apart the uncemented corner as indicated / by the arrow and remove the paper. / take the folded ends of the bandage in each / hand and keeping the bandage taut, apply the / gauze pad to the wound and fix the bandage. In the case of head wounds when respirators have / to be worn, care should be taken to adjust the pad / so that it does not interfere with the fit of the face / piece. / DO NOT HANDLE THE GAUZE OR WOUND/ Johnson & Johnson / Pty. Ltd Sydney/ October 1942 / a red arrow drawn diagonally over top of printed instructed pointing to where to open the bandage. On the reverse is hand written "Lent by Lance Flynn" bandage, guaze, waterproof paper

Item is an essential item of kit that is carried by a soldier to provide immediate first aid to a personal injury sustained in battle of to render first aid to a fellow combatant Item was part of first aid equipment that all soldier carried when on active war like duties in WWII. First Field Dressing unpacked from original container. Bandage in waterproof package with safety pin in waterproof wrapping attached by cotton thread. Red arrow diagonally across package indicating where to open. Missing safety pin. Printed on waterproof wrapping. FIRST FIELD DRESSING/ Tear apart the uncemented corner as indicated / by the arrow and remove the paper. / take the folded ends of the bandage in each / hand and keeping the bandage taut, apply the / gauze pad to the wound and fix the bandage. In the case of head wounds when respirators have / to be worn, care should be taken to adjust the pad / so that it does not interfere with the fit of the face / piece. / DO NOT HANDLE THE GAUZE OR WOUND/ Johnson & Johnson / Pty. Ltd Sydney/ October 1942 / a red arrow drawn diagonally over top of printed instructed pointing to where to open the bandage. On the reverse is hand written "Lent by Lance Flynn" bandage, guaze, waterproof paper, cotton

Medals awarded to Cyril John JOHNSON VX36298 died as a POW. Refer Cat No 3144 for his service history.Set of (5) WWII medals court mounted re C J JOHNSON. 1. 1939 - 1945 Star 2. Pacific Star 3. Defence Medal 4. War Medal1939 - 1945 5. Aust Service Medal 1939 - 1945Engraved VX36298 C J JOHNSON.medals, military, history

Two sealed packets of packing gauze. Printed stamp on each package reads 'NUFOLD RAYTEC packing gauze/ONE ROLL/100mm x 2m'. Each package is also stamped with the number '054U'. Packing is printed with a blue and red design noting the contents as sterile and being manufactured by Johnson & Johnson.surgery

Presented to Mrs. H.J.Wheeler with the compliments of the State Electricity Commission of Victoria, Electricity Supply Department, Ballarat Branch, on the occasion of the "Switching On" of the Electricity Supply to Learmonth,19th March,1938.A pair of scissors that were used to "switch on" the electricity supply to Learmonth on the 19th March 1938. Gold Scissors in black box, with blue and white lining.Johns and Johnsonlearmonth, boxed gold scissors, electricity

Medium size First Field dressing bandages designed to be carried on the person and to be used in the first instance of a wound. There are basic instructions on the field dressings on how to place the dressings on a wound. Each packet has the identical markings except for the Manufacturers date. 1. February 1942. 2. October 1941. 3. January 1942. 4. June 1944. 5. June 1944. 6. November 1944. FIRST FIELD DRESSING. "See attachment for Treatment conditions". DO NOT HANDLE THE GAUZE OR WOUND. Johnson & Johnson Pty Ltd. SYDNEY February 1942.passchendaele barracks trust, first field dressings

Small First Field dressing bandages designed to be carried on the person and to be used in the first instance. There are basic instructions on how to place the dressings onto or over a wound. All packets have identical markings except for the Masnufacturers date. 1. November 1942. 2. November 1942. 3. March 1943. 4. June 1944. 5. June 1944. “FIRST FIELD DRESSING” "See attachment for treatment conditions". “DO NOT HANDLE THE GAUZE OR WOUND. Johnson & Johnson Pty Ltd, SYDNEY November 1942”passchendaele barracks trust, first field dressings

Round china teapot with yellow/orange background colour. Blue,pink and purple rose on front and back.bottom-............pottery, Johnson.....(unreadable)teapot domestic-items food-drink-consumption johnson

Noel Johnson, No 650, 21st Battalian AIF embarked for overseas on 8.5.1915. He was later hospitalised and invalided home on 3.3.1916. He re enlisted as No 5948 in the 23rd Batt AIF and returned overseas on 16.11.1916. He was hospitalised twice more and then was discharged medically unfit on 29.8.1918.Medal set, court mounted, set of (3) re N Johnson. 1. 1914-15 Star, replica not engraved. 2. War Medal 1914-19, replica not engraved. 3. Victory medal."650 PTE. N. JOHNSON. 21 BN AIF."medals, military, history, campaign.

This semi-porcelain wash basin would have been used in a Victorian household for bathing and personal hygiene. It was made by the well-known firm Johnson Bros. in England. The wash bowl or basin is a typical example of a Victorian era household's bathing item. It is significant for its association with renowned potters Johnson Bros. of EnglandBowl or wash basin, white with pink and green floral decoration. Inscription on base; stamped in brown paint. Royal semi-porcelain material, made by Johnson Bros, England"ROYAL / SEMI-PORCELAIN / JOHNSON BROS. / ENGLAND" Symbol [Crown above a ribbon with maker's name.]flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, wash bowl, wash basin, bathing, personal hygiene, johnson bros, pottery, percelain, semi-porcelain

The Process of Making Pottery Decorating, Firing, Glazing, Making, Technical There is a rhythm and flow to clay. It can’t be done all at once! Even the making process! It can take weeks to get everything done, especially if you can only work on your pottery once a week! Even though we have three hour classes, it’s often just not enough time! Here is an overview of some of the processes so you have a bit more grasp on some of the technical stuff! Step One – Design There are SO many ideas out there for making stuff in clay! From delicate porcelain jewellery, through to heavy sculptural work and everything in between. Deciding your direction is sometimes not that easy – when you first start, try everything, you will naturally gravitate to the style that you enjoy! The options and variations are endless and can get a wee bit overwhelming too! Check in with me before you start to ensure your ideas will work, what order you might do things, how you could achieve the look you are seeking and any other technical data required! Step Two – Making Clay is thixotropic. This means that as you work with it, the clay first gets sloppier and wetter, before is begins to dry in the atmosphere. For most things, you simply can’t do all parts of the project at once. An example of work order might look like: Get last weeks work out from the shelves Prepare clay for today’s work – roll your clay, prepare balls for throwing, make the first stage of a pinch pot) Clean up last week’s work and put it on the shelf for bisque firing Check that you have any glazing to do – and do enough of it that you will have time to finish your main project Do the next step of your next project – there might be a further step that can’t be complete immediately, in that case, wrap your work well and put onto the shelves. Letting your work rest for a while can really help keep your work clean and professional looking. Many things require bagging under plastic to keep it ready for work the next week – put your name on the outside of the bag so you can find your work easily. We have stickers and markers. Consider how you want to decorate your work – coloured slip can be applied at a fairly wet stage (remembering that it will make your work even wetter!). Trying to apply slip to dry clay won’t work! If you want to do sgraffito – you will need to keep the work leather hard (a state of dryness where you can still work the clay with a little effort and a little water and care). Step Three – Drying Most of the time your work can go into the rack uncovered to let it dry out for the following week. If you want to continue forming or shaping you will need to double bag your work – put your work on a suitable sized bat and put the bat in a bag so the base of the bag is under the bat, then put another bag over the top of the work and tuck the top of the bag under the bat. If you want to trim (or turn) your thrown work the following week, it should also be double bagged. If your work is large, delicate, or of uneven thicknesses, you should lightly cover your work for drying. When considering the drying process, bare in mind the weather, humidity and wind! The hotter and dryer, the faster things dry and work can dry unevenly in the shelves – this can lead to cracking – another time to lightly cover your work for drying. Step Four – Trimming and Cleaning Up Your work is dry! It is called greenware now and it is at it’s most fragile! Handle everything with two hands. I often refer to soft hands – keep everything gentle and with your fingers spread as much as possible. Try to not pick up things like plates too much, and always with both hands! Before your work can be bisque fired it should be “cleaned up”. You work won’t go into the kiln if it has sharp edges – when glazed, sharp edges turn into razor blades! Use a piece of fly wire to rub the work all over – this will scratch a little so be light handed. Use a knife or metal kidney to scrape any areas that require a bit more dynamic treatment than the fly wire offers! Finally, a very light wipe over with a slightly damp sponge can help soften and soothe all of your edges and dags! Trimming thrown work: If you are planning to trim (or turn) your thrown work (and you should be), make sure you bag it well – your work should be leather hard to almost dry for easiest trimming. Use this step to finish the work completely – use a metal kidney to polish the surface, or a slightly damp sponge to give a freshly thrown look. Wipe the sponge around the rim after trimming, and check the inside of the pot for dags! Trimming slip cast work: Usually I will trim the rims of your work on the wheel the following day to make that stage easier, however you will still need to check your work for lumps and bumps. Last but not least – check that your name is still clearly on the bottom of your work. Step Five – Bisque Firing When the work is completely dry it can go into the bisque kiln. The bisque kiln is fired to 1000°C. This process burns off the water in the clay as well as some of the chemically bound water. The structure of the clay is not altered that much at this temperature. Inside the bisque kiln, the work is stacked a little, small bowl inside a larger bowl and onto a heavy plate. Smaller items like decorations or drink coasters might get stacked several high. Consideration is paid to the weight of the stack and shape of the work. A bisque kiln can fire about one and a half times the amount of work that the glaze kiln can fire. The firing takes about 10 hours to complete the cycle and about two days to cool down. Once it has been emptied the work is placed in the glaze room ready for you to decorate! Step Six – Glazing Decorating your work with colour can be a lot of fun – and time consuming! There are three main options for surface treatment at this stage: Oxide Washes Underglazes Glazes Washes and underglazes do not “glaze” the work – It will still need a layer of glaze to fully seal the clay (washes don’t need glaze on surfaces not designed for food or liquid as they can gloss up a little on their own). Underglazes are stable colourants that turn out pretty much how they look in the jar. They can be mixed with each other to form other colours and can be used like water colours to paint onto your work. Mostly they should have a clear glaze on top to seal them. Oxides are a different species – the pink oxide (cobalt) wash turns out bright blue for instance. They don’t always need a glaze on top, and some glazes can change the colour of the wash! The glazes need no other “glaze” on top! Be careful of unknown glaze interactions – you can put any combination of glaze in a bowl or on a plate, but only a single glaze on the outside of any vertical surface! Glazes are a chemical reaction under heat. We don’t know the exact chemicals in the Mayco glazes we use. I can guess by the way they interact with each other, however, on the whole, you need to test every idea you have, and not run the test on a vertical surface! Simply put, glaze is a layer of glass like substance that bonds with the clay underneath. Clay is made of silica, alumina and water. Glaze is made of mostly silica. Silica has a melting point of 1700°C and we fire to 1240°C. The silica requires a “flux” to help it melt at the lower temperature. Fluxes can be all sorts of chemicals – a common one is calcium – calcium has a melting point of 2500°C, however, together they both melt at a much lower temperature! Colourants are metal oxides like cobalt (blue), chrome (green through black), copper (green, blue, even red!), manganese (black, purple and pink) iron (red brown), etc. Different chemicals in the glaze can have dramatic effects. for example, barium carbonate (which we don’t use) turns manganese bright pink! Other elements can turn manganese dioxide brown, blue, purple and reddish brown. Manganese dioxide is a flux in and of itself as well. So, glazes that get their black and purple colours, often interact with other glazes and RUN! Our mirror black is a good example – it mixes really well with many glazes because it fluxes them – causes them to melt faster. It will also bring out many beautiful colours in the glazes because it’s black colouring most definitely comes from manganese dioxide! Glaze chemistry is a whole subject on it’s own! We use commercial Mayco glazes on purpose – for their huge range of colour possibilities, stability, cool interactions, artistic freedom with the ability to easily brush the glazes on and ease of use. We currently have almost 50 glazes on hand! A major project is to test the interactions of all glazes with each other. That is 2,500 test tiles!!!! I’m going to make the wall behind the wheels the feature wall of pretty colours! Step Seven – Glaze (Gloss or sometimes called “Glost”) Firing Most of the time this is the final stage of making your creation (but not always!) The glaze kiln goes to 1240°C. This is called cone 6, or midrange. It is the low end of stoneware temperatures. Stoneware clays and glazes are typically fired at cone 8 – 10, that is 1260 – 1290°C. The energy requirement to go from 1240°C to 1280°C is almost a 30% more! Our clay is formulated to vitrify (mature, turn “glass-like”) at 1240°, as are our glazes. A glaze kiln take around 12 hours to reach temperature and two to three days to cool down. Sometimes a third firing process is required – this is for decoration that is added to work after the glaze firing. For example – adding precious metals and lustres. this firing temperature is usually around 600 – 800°C depending upon the techniques being used. There are many students interested in gold and silver trims – we will be doing this third type of firing soon! After firing your work will be in the student finished work shelves. Remember to pay for it before you head out the door! There is a small extra charge for using porcelain clay (it’s more than twice the price of regular clay), and for any third firing process! Once your work has been fired it can not turn back into clay for millennia – so don’t fire it if you don’t like it! Put it in the bucket for recycling. https://firebirdstudios.com.au/the-process-of-making-pottery/Ceramics have evolved over thousands of years.A white earthenware side plate with a gadroon edge. Has water marks and chips on front.‘Johnson Bros England Reg No 15587’flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, johnson bros, ceramics, tableware

These packs were Australian army issue to service men and women during World War 2.Many Orbost men served in World War 2. Three field dressing packs made from cloth or waterproof covering and with a black printed label on one side of each pack. The words FIRST FIELD DRESSING and instructions TO OPEN and CONTENTS are printed on each pack. On the bottom of the print area are JOHNSON & JOHNSON PTY LTD, SYDNEY. One pack has the date May 1942, and the other two are December 1943. australian-army first-field-dressings world-war-two

206 p., illus. (some col.), maps.non-fictionA history of the first 100 years of Kew Golf Club in Belford Road, East Kew, founded in 1894.golf clubs - kew, golf clubs - history, kew golf club