Mt Beauty didn't have ice-skating but Mt Buffalo did. The skates may have been owned and /or used by a Mt Beauty resident.Black leather boots with ice skates attached. The boots are laced from toe to above the ankle. There is a buckle strap for tightening and supporting the ankle and a steel plate attached at the back of the heel from the bottom to half way up the top. This has an inscription. The ice skate is shiny steel and screwed on. C C M in the centre of an oval with writing around the outside and more on the inside. On the skate: An oval inscribed with 'Made in Canada' / by / C.C.M. towards the back and towards the front C.C.M. / Winter Clubice skating, mt buffalo

See cat 5727.2 for Service details. Dust coats were donated with the Keith Balfour Gordon GILL RAAF uniforms.1. & 2. Dust coat - Khaki colour cotton fabric, long lenhth, half pintucks on bodice, long sleeves, full belt with metal buckle. Dust coats appear to be female. 2. Long sleeves have been cut off.Maker's labels - Black print on white cotton label - "Q136 MADE IN AUSTRALIA/1944/ size 24. - Black print on beige colour paper - MADE IN AUSTRALIA/Q136 1944/ size 24/ Height 6.0/Bust 42.uniforms, raaf, ww2

This jacket belonged to Dorothy May Mortlock (VF518245) who was part of the Australian Womens Army Service (AWAS). Dorothy Mortlock was born in Swan Hill and enlisted with the 3rd AUST AWS REC DEPOT.Khaki-coloured woollen jacket which fastens along the centre via four metal buttons. Two hip-height pockets with external flap; two chest pockets with pleat in centre fastened via a metal button. Fabric belt around waist held in place by two fabric loops on back and fastened through metal buckle and loop. Collar carries two metal rising sun badges on the left and right side. Two epaulettes on either shoulder are held in place by a button and carries a badge reading "AWAS". Colour patch on both left and right side is square, half green and half black. Interior label on base of neck.Label reads "V 579/1943/SIZE/MADE IN/AUSTRALIA/D. MORTLOCK/VF518245". Rising sun badge reads "AUSTRALIAN COMMONWEALTH/MILITARY FORCES." Buttons read "AUSTRALIAN MILITARY FORCES."world war ii, second world war, wwii, women, australian women's army service

This jacket is part of a Royal Australian Army Ordnance Corps uniform. The Royal Australian Army Ordnance Corps (RAAOC) is responsible for various logistics and organisational operations, such as maintenance of parachutes, fuel distribution, personnel administration, exlosive disposal and laundy operations. The jacket was manufactured in 1968 and was worn by an unknown RAAOC serviceman. The patches on his sleeves denote that he had earned qualifications as a parachuter and a marksman and that he was a Warrant Officer 1. Due to the period of manufacture it can be presumed that the serviceman whom this uniform belonged to served Vietnam War.As an historic military uniform dating to 1968, it is presumed that this item would have been used in service during the Vietnam War. The wearer of the uniform is unknown, however the patches and flashes attached signify that the serviceman worked for the Royal Australian Army Ordnance Corps, earned qualifications as a parachuter and marksman and ranked highly as a Warrant Officer 1. The item is representative of a type of uniform worn by high ranking RAAOC servicemen during the 1960’s. It is also in very good condition for its age.A khaki coloured waist length jacket which is composed of a heavy fabric. The jacket fastens with five buttons down the front and a buckle. The buttons are composed of brown plastic and the buckle is a dark grey metal. The buckle is attached to a waistband on the right-hand side which loops around to a strip of fabric on the left-hand side which passes through the buckle. There are two breast pockets, one on each side of the chest. The right breast pocket is fastened with a brown plastic button and the left breast pocket is missing its button. Each pocket has a flap of fabric which covers the button area. The jacket has a collar and an epaulette on each shoulder which are each fastened with one brown plastic button. There is a ribbon of fabric on the interior of the collar with no inscriptions. There are identical crescent shaped red patches on each shoulder, each showing the words in navy blue stitching "Royal Australian Army Ordinance Corps". The upper right sleeve has a khaki coloured parachuting qualification patch, which depicts an air balloon in white stitching, with wings on either side in light blue stitching. The lower section of each sleeve has a Warrant Officer First Class khaki coloured patch. This depicts a shield in red, black, white, blue and gold stitching in the centre which sits beneath a gold and blue striped line and a gold star. There is a gold kangaroo to the left of these motifs and a gold emu to the right. Beneath these motifs there is a ribbon in white, blue and gold stitching with the word "Australia". In addition there are curvilinear green decorative elements with yellow flowers on their ends. The left-hand sleeve also has a brown marksmen qualification patch. This depicts two crossed rifles in white and brown stitching. There is a white label with printed inscriptions on the interior of the left breast pocket. There is also a band of fabric on the interior back waist band which has three button holes.Printed in black inscriptions on the white label: E.W. PTY/LTD. SOUTH AUSTRALIA 1968 (a broad arrow) Class 8405-66-025-641 Batch A.W... Mill (the ‘A.W...’ is in stamped purple ink and there are some other purple inscriptions that are difficult to decipher) SIZE OF CHEST 39/49PR MATCHING TROUSERS 37 PR DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY NAME..... ARMY No..... (the number 40 is also wrtten in faded black ink in the top right corner of the label)military, jacket, army, raaoc, royal australian army ordnance corps, parachuting, marksman, warrant officer, uniform

Saddle bag used during the First World War. This is presumably a dog saddle bag used to carry machine gun weaponry.This item is a piece of equipement that presumably was used as a dog saddle bag during the First World War. As a WW1 item which presumably would have been worn by working war dogs, this item has an unique history associated with it. It is a rare item, it has historic significance and good interpretive capacity as an unusual piece of war equipment.Fabric and leather saddle bag rectangular in shape with curved edge for the curve of the animal's neck. Fabric is beige-coloured on interior and a thicker woven layer on the exterior is brown with black and light green stripes; fabric remains on only half of the exterior saddle and holes throughout remaining. Saddle has leather binding along edges. Each side carries five pockets, the outer two on each side are fastened by metal buckle and the middle remaining unfastened. Pockets are lined with same beige-cream woven fabric. Leather strap fastens around the neck of the animal and is secured with a metal buckle which inserts through one of several punched holes. first world war, world war i, world war one, the great war, saddle, horse, mule, mounted infantry, equine

Ernest OLD. Records show that he enlisted for the Boer War No 2356 on 11.7.1902 in the 2nd Australian Commonwealth Horse age 27 years. On 10.8.1912 he enlisted in the 17th Aust Light Horse No 84004 D Troop A Sqd. He then enlisted in the AIF No 77, 13th LH, HQ & Machine Gun Section aged 40 years on 22.12.1914. Embarked for Eygpt 28.5.1915. Embarked for Gallipoli 4.9.1915. Hospitalised 24.12.1915 with Parotitis / Mumps. Hospitalised 23.1.1916 with Debility. Transferred to 2nd Pioneers 14.3.1916. Embark for France 19.3.1916. WIA 14.11.1916 GSW thighs severe. Medically downgraded to C3. Returned to Aust 20.12.1917 re wounds and overage. Discharged from the AIF 27.3.1918. He then went back into 17th LH until 1933 with the rank WO 2 in Stores.Australian Lighthorseman Slouch Hat with pugaree, emu plume, badge & leather chin strap with metal buckle. The badge has the devil above a half wreath of leaves on a round red Petersham On Badge: "13/ALH" Handwritten inside crown: E. Old 7' (Size) Adelaide HATS COY 1028armed forces, military uniform, costume, hats, australia, male

This belt was worn with the jacket issued to members of the Warrnambool Fire Brigade in the mid 20th century. The jacket was part of the uniform that served both as a dress uniform and a work uniform. The Warrnambool Fire Brigade was formed in 1863 following unsuccessful attempts to establish a permanent fire service in the town. It was prompted by a fire at the Flying Buck Hotel in Liebig Street. The Warrnambool Fire Brigade, now located on the Mortlake Road, has been successful in Victorian Fire Brigade competitions and demonstrations, particularly in the 19th century. The owner of the belt and uniform was John (Jack) Sizeland, a member of the Warrnambool Fire Brigade for over 37 years. This belt is of interest as it was part of a Warrnambool Fire Brigade uniform during the second half of the 20th century. It also has individual local provenance as it belonged to Jack Sizeland, a member of the Warrnambool Fire Brigade who retired in 1977 after 37 years of service. This is a brown leather belt with a gold metal buckle and nine punched holes on the buckle, two of them hand-punched. It has a leather attachment to keep the belt end in place. It has the name of the owner, John Sizeland, written in biro on the inside of the belt. This belt is meant to be worn with the Warrnambool Fire Brigade jacket with the brass buttons. ‘J. Sizeland, W’bool’warrnambool fire brigade, jack sizeland, history of warrnambool

This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of uniform worn by soldier ranks for daily work and dress parades.Khaki coloured short jacket with lapels, and waist band which has strap and buckle on right hand side. There are two patch pockets on the front have a box pleat down the middle and a V shaped pocket flap at the top, closing with a hidden button. The shoulder epaulets each have a plain khaki coloured button at the neck edge.The sleeves are cuffed fastened with a button however the right button is missing.There are red patches on each shoulder with navy blue text. The back of the jacket has darts stitched at the waist and at shoulder level. There are four khaki buttons down the front. The sleeve seams are bound in cotton tape which also forms a label on the back neck collar with the lining of the waist band also in a cotton twill.Stitched in navy blue on arm banners,” Royal Australian Engineers.” On inner label, “ DUNLOP NSW 1968 8405-66-025-6411 SIZE OF CHEST 35/36S MATCHING TROUSERS 29/30S WAIST DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY . NAME....HUGHES ( in blue pen) ARMY NO... 3795948 (in blue pen)warrnambool rsl, royal australian engineers, hughes 3795948

Men's black wool waistcoat, fastened with four fabric buttons (1.5cm diameter). Decorative lapels edged with Ric-Rac.Back section of black cotton. Fully lined with cream cotton fabric. Two front pockets lined with black cotton fabric (12 cm X 8 cm). Pockets with 2 cm band at opening edged with black Ric-Rac. Half belt across back of waistcoat (5 cm at sides tapering to 2.5.cm at centre), fastened at centre back with black metal buckle with two prongs. Found inside pocket - small pink pencil (5 cm) with silver coloured metal cap with 2 cm string attached, black metal hollow tube 3.5 cm X 2 cm.costume, male, mens black waistcoat

Cotton off white men's waistcoat with six 1.6cm white plastic buttons. High collarless V neckline. Cotton fabric has checked pattern with small red crosses on corners of checks. Fully lined with cream coloured cotton fabric. Three flat pockets on front each with 2 cm band across top edge. One breast pocket on LHS. Two pockets above waist fob watch button hole at front, 12 cm above hem. Pockets lined with cream coloured cotton fabric. Back of vest made of plain cream coloured cotton fabric. Half belt at back (tapering from 4.5cm at back to 2.5cm at centre) fastened with gold coloured metal buckle with two prongs. Buckle attached with button down flap.Imprinted on buckle ''PARIS'' ''SOLIDE''costume, male, men's white cotton waistcoat

Professor Arthur Barrington (Barry) Baker was the first Australian anaesthetist to gain a DPhil in anaesthesia. He completed his DPhil at Oxford University at the Nuffield Department of Anesthesia in 1971, titled, Physiological Responses to Artificial Ventilation. The Waveform Ventilator is the machine developed to illustrate his DPhil. The waveform ventilator was used in several scientific studies on 'the effects of varying inspiratory flow waveforms and time in intermittent positive pressure ventilation (IPPV)', published in the 'British Journal of Anaesthesia'. Professor Arthur Barrington Baker had an extensive career in research and clinical practice including holding the position as the Nuffield Professor of Anaesthetics at Sydney university (1992 - 2005) and also as the Dean of the Australian and New Zealand College of Anaesthetists (ANZCA) (1987-1990).The variable waveform ventilator is of national significance, due to its association with Professor Arthur Barrington Baker (Prof. Baker) the first Australian academic anaesthetist, and the representation of historical social themes and research and design, in anaesthesia. Historic significance – It is a rare type of ventilator in good condition and well provenanced. It is a tangible record of the beginning of the long established and distinguished career of Prof. Baker, the first anaesthetist in Australia to gain a DPhil. Prof Baker has a strong involvement in the Australian and New Zealand College of Anaesthetists (ANZCA) organisation. The object is a product of Prof Baker’s Doctorate of Philosophy (DPhil) on respiratory physiology and is associated with the prestigious Oxford University and the well-known Nuffield Department of Anaesthetics. It also represents the social theme of migration to England from Australia in the 1960s and 1970s to access and experience academic and artistic opportunities limited in Australia at the time. Scientific Value – The object is of scientific value as it offers major potential for education and interpretation in anaesthesia. Although ventilators are common equipment, this specific design and construct prototype is one of a kind, designed and used specifically for research purposes. A rectangular shaped object on a trolley with four wheels. The top half of the object consists of two panels, one of cream coloured painted wood, the other black plastic, both containing several dials of different shapes and sizes. The wood surface also contains several gauges and a safety pressure clear plastic box. The plastic surface also contains a pin board. The bottom half of the object consists of two shelves. The whole object's perimeter is lined with perforated metals. The top wooden surface has several metal pieces of equipment and a long tube. The rear of the object contains numerous types of tubing and wire, a gas cylinder and two leather straps with buckles. The bottom half of one side of the objects has 3 electrical power outlets.Waveform Generator, Drs Colliss N Cowie, Dr Baker Dr Murray Willson, Dr Babbington, Safety Pressure, Error POS F/B, Position, Feedback, Set Balance, Reset, Full Stroke, Velocity, Converter Current, line Pressure, Low Pressure, Bias Pressure, Start, Stop, Stop, Reset Press, Max Press, W/G Output, A/CRO B/2.baker, arthur barrington, baker, barry, professor, academic anaesthetist, oxford university, nuffield department of anaesthesia

Rifle buckets were used by British and Commonwealth mounted troops from the First World War to around 1941. In the Australian Light Horse units their use did not become common until the end of the First World War. Prior to this rifles were carried slung across the rider's back.Long cylinder shape made from dark brown leather with leather strap and brass buckle at the top of the bucket which attaches it to the saddle .The bucket is missing a leather slide steadying fitting, half way down the bucket which attaches to the surcingle of the saddle.rifle bucket, light horse

Worn as a day frock by Edith Finger.c 1930s Green floral patterned short sleeved street dress. Round neck with roulet trim at yoke. Long waisted with roulet trim, half belt at waist with buckle doing up at back. Placket with press studs and hooks and eyes. Buttoned at back at neck with four covered buttons and loops.costume, female

WWII HeritageFrom Australian War Memorial: Standard issue blocked brown leather rifle bucket for attachment to the Pattern 1912 UP saddle. Bucket is complete with a leather slide steadying fitting, half way down the bucket, to attach it to the surcingle of the saddle, and a leather strap with brass buckle at the top of the bucket which attaches it to the saddle tree.Strap only is stamped with a broad arrow and manufacturer's details 'BLACKMAN LEATHER GOODS LTD. 175 BERMONDSEY ST S.E.1 1940'.

Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers

Brown leather carry pouch used as an equestrian accessory in the late 1800's Manufactured by Holden and Frost in the late 1800's Half round brown leather carry pouch with strap and buckleG.V.H.leather, equestrian accessory, pouch