It is difficult to write about Vietnam during this cruel period of its history.vietnam - history, vietnamese

It is difficult to write about Vietnam during this cruel period of its history.vietnam - history, vietnamese

In 2020 during the period of lockdown due to COVID the National Wool Museum asked their volunteers to make and donate blocks made from a variety of materials found in their homes, for an ISO quilt. The NWM reached out to the patchwork and quilter community to find a local quilter to sew the donated blocks together. The quilt is sewn together and quilted by Judith Oke, 2020-2021. Judith is a local patchwork and quilter and a member of Geelong Patchwork & Quilters Guild. Through the process she was inspired by the tradition of wagga quilts, where bits and pieces are stitched together, sometimes lined with whatever the sewer found available, such as clothing and sacking, to provide warmth. In construction of the finished quilt the challenge was combining 10 inch blocks made from a variety of materials, with uneven sizing. The aim was to combine these very different blocks into a harmonious whole. To this end a light and dark pattern was planned, with the blocks to be sewn onto a blanket. The choice to layer the blocks over each other, rather than sew an even seam was aimed at emphasizing the make do nature of these ISO blocks. Due to the weight of the blanket a decision was made to sew the blocks onto a base before the whole was stitched onto the blanket. The blanket was sourced from NWM donations. The rich, red of the blanket provides a bright, warm background for the colourful squares. Some of the light weight blocks were backed with iron-on interfacing to strengthen them for sewing. The edges of two of the woven squares were blanket stitched with knitting wool. The 10 inch donated blocks/squares were machine sewn to a cotton sheet base, with liberal use of blanket stitching, as the blanket was too heavy to sew the blocks directly onto the blanket. The base with squares was then machine sewn onto the red blanket backing.Various multi coloured and designed patchwork squares sewn onto a red woollen blanket. isolation, covid, quilt, wool

Hammer headHammer head, rusted.tools, hammers, hand tools

May have been used by a cobbler or shoemaker due to its size.A small steel headed Farrier's hammer with a handmade wooden handle. The head is grooved to pull out nails. The small head suggests that it may have been used by a cobbler, shoemaker or farrier.tools, bootmaking tools, shoe hammers, wood, steel, hammers, striking tools, hand tools

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast iron hammer with a wooden handle. Larger Cutter/knife, cast iron with a wooden handle. Smaller Cutter/knife, cast-iron with a wooden handleHammer: "London" Larger knife: "Pettys Sheffield".bootmaking tools, hammers, cutting tools

A hammer is a tool with a heavy head and a handle, often made of shock-absorbent wood or fiberglass that is used to strike an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers vary in shape, size, and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head most often made of steel and a handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and a handle, fastened together by means of a special wedge made for the purpose, or by glue, or both. This two-piece design is often used, to combine a dense metallic striking head with a non-metallic mechanical-shock-absorbing handle -to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often hickory or ash, which are tough and long-lasting materials that can dissipate shock waves from the hammer head. A well used hammer with wooden handle and steel headpioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, tools, craftsman, carpenters, blacksmiths, builders, woodwork,

Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . Besides for peening (surface hardening by impact), the ball-peen hammer is useful for many tasks, such as striking punches and chisels - usually performed with the flat face of the hammer. The peening face is useful for rounding off edges of metal pins and fasteners, such as rivets. The ball face of the hammer can also be used to make gaskets for mating surfaces. A suitable gasket material is held over the surface where a corresponding gasket is desired, and the operator will lightly tap around the edges of the mating surface to perforate the gasket materialThis hammer is typical of the type used by early settlers in Moorabbin Shire c1900A hard faced ball & peen hammer, also known as a machinist's hammer,[ is a type of peening hammer used in metalworking. It has two heads, one flat and the other, called the peen, rounded.early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

This tunic and cap were worn by Major General H H (Tack) Hammer CBE DSO & Bar, ED when Honorary Colonel 8th/13th Victorian Mounted Rifles Regiment 1959-1960 Hammer had pre-WWII service with 8th Battalion and 17th Light Horse (Machine Gun) Regiment. He served with the 6th Division in North Africa and Greece before becoming Commanding Officer of 2nd/48th Battalion. On return from the Middle East, Hammer commanded the 15th Brigade throughout two years of fighting in New Guinea and Bougainville. After the war, Hammer became Commissioner for Repatriation in Victoria and continued his military career in the Citizens Military Forces, commanding the 2nd Armoured Brigade and later 3rd Division. Open-neck officer's 'Blues' tunic with gold braided general's epaulettes and Major General's embroidered badges of rank; gilt general's buttons; red and gold braided aiguillette and white gloves. Uniform worn by Major General H H (Tack) Hammer when appointed as Honorary colonel of 8th/13th Victorian Mounted Rifles. Medals awarded to Major General Hammer are Commander of the British Empire (CBE), Distinguished Service Order (DSO), Mentioned in Despatches (MID), 1939-45 Star, Africa Star, Pacific Star, Defence Medal 1939-45, British War Medal, Australian Service Medal 39-45, Queen Elizabeth Coronation Medal, Efficiency Decoration (ED). General's peak cap with gold bullion hat badge and double row of oak leaves on peak. Medals on display are replica.8/13 vmr, military, hammer, honorary, colonel, general, world war two, wwii, cmf

Steam hammers, invented by Englishman John Naysmith in 1841, made possible the forging of heavy iron bars and greatly reduced the physical labour required in forging. The hammers could vary in capacity (drop-force) from 400 pounds [lbs.] (181 kg) to 400 Tons (406.3 tonnes) and were once a part of most major engineering works. The Victorian Railways, from where the Museum exhibit came, used many hammers of varying sizes, their largest being at Newport Workshops measuring 30 feet (9.1 metres) high by 15 feet (4.6 metres) wide. Steam Hammers have made forging of heavy iron bars possible and has greatly reduced the physical labour required in forging. Historic - Victorian Railways - Industrial Steam Hammer Large metal mechanical steam hammer. made of iron & wrought ironC James Maker Melbournelarge, mechanical, steam, hammer

"H.H. Hammer" Regt No’s 3107396, VX24325. Born 15.2.1905, enlisted Bendigo 10.6.1940, discharged 28.11.1945 with the rank of Brigadier in 15th INF Brigade, awarded CBE and DSOFramed photo and details of a decorated WW2 Soldier“ Major General Howard Heathcote Hammer CBE, DSO”framed photographs, military history, ww2, howard heathcote hammer

A hammer is a tool with a heavy head and a handle, often made of shock absorbent wood or fibreglass, that is used to strike an object. The most common use for hammers are to drive nails, fit parts, forge metal and break apart objects. Hammers vary in size, shape and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head, most often made of steel and handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and handle, fastened together by means of a special wedge made for the purpose, or by glue, or by both . This 2 piece design is often used to combine a dense metallic striking head with a non-metallic mechanical shock absorbing handle - to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often ash or hickory, which are tough and long lasting materials that can dissipate shock waves from the hammer head. This upholsterer’s hammer has one end of the steel head rounded for knocking nails into wood furniture. The other end is divided to form a 2 pronged claw for withdrawing nails. . An upholsterer's hammer with a steel head and wooden handle, The steel head has one rounded end and a clawed endpioneers, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, brighton, tools, craftsman, carpenters, cabinet makers, blacksmiths, builders, woodwork

Large "Engineer's hammer with metal & copper coiled wire around wooden handle. "Cross Pein"tools, hammer, "cross pein"

Coach builder's tack hammer and packet of shoe tingles. Tack hammer has wooden handle with rusted cast head, 300mm in length. Packet of original 1/2 inch shoe tingles, purchased from Coles Stores. Items stred in Coach builder's box, reference 13000.1.Packet of original 1/2 inch shoe tingles, purchased from Coles Stores. Source of hammer unknown.

The handle of this hammer looks to be home-made and to have been used as a household tool. Most homes still today include a small hammer as a household item. The provenance of this hammer is unclear but it possible that it is the hammer found at ‘Guthrie’, a house in Merri Street, Warrnambool that was demolished. ‘Guthrie’ was the home of the Dickson family, prominent in Warrnambool business circles. James Dickson, with his friend John Cramond, established a store in Warrnambool in the mid 19th century and this department store, known as Cramond and Dickson, was a prominent business in Warrnambool until its closure in 1973. James Dickson’s son and his family lived at ‘Guthrie’ and the hammer may have belonged to the Dicksons or another family connected to that property. This hammer has a metal head and a wooden handle. The top of the handle has a metal screw inserted and small slivers of the wood are missing. The end of the metal section is much worn.household tools, history of warrnambool

Metal branding hammers were the most common way to control the sale and movement of hardwood timber produce like logs, railway sleepers, fence posts, and poles from Victorian State forests. Royalty was also paid on this basis. The hammer has a crown stamp on one end with a unique number in the middle (453) which identified its owner, and a crows foot or broad arrow on the other. The broad arrow was a symbol traditionally used in Britain and its colonies to mark government property. Forest regulations state that an authorised officer may use the crown mark to identify produce which has been sold and may be removed from the forest, whereas the broad arrow can be used to brand and mark trees which are not to be felled, or to indicate forest produce which has been seized. Hammers were traditionally only ever issued to forest officers and were an important, and closely guarded tool-of-trade. They were not transferred between staff and lending hammers was not permitted. But it was an onerous task for staff to hammer and tally hundreds of logs, or thousands of fence posts each week, so in about 1990 a system was introduced whereby hammers were allocated to logging contractors to grade logs and tally them instead. But there was still spot checking by authorised officers. A register was kept, and contractors paid a substantial deposit to make sure they didn't lose them, but they occasionally turn up by fossickers with metal detectors. While branding hammers are still used in some smaller locations, plastic tags and barcodes are now more common.Metal log branding hammer with a crown stamp on one end with a unique number (453) in the middle which identified its owner, and a crows foot or broad arrow on the other. The unusual bent metal handle was designed to protect user from banging their fingers on the log. It was also fitted with a rubber hand grip. Most FCV branding hammers were issued with wooden handles. The branding hammer 453 was initially issued to Wally Cowell at Beechworth. It was reissued to Jim Browning upon Wally’s retirement The hammer still had a wooden handle, but the it broke and became loose inside hammer head. Russel Pritchard from the Beechworth Depot replaced the handle with a new metal one and put a dog leg in it It mainly branded forest produce cut in Mt. Pilot and Reedy Creek areas. The main logging contractors were Gordon Habeck from Chiltern and Steven Goldsworthy from BeechworthCrown mark one end (453) and Crows foot other endforest harvesting, forests commission victoria (fcv)

This blacksmith's hammer was an integral tool used by cattle property "blacksmith's" for the maintenance of horse shoes and the manufacture/alterations and repair of any other metal item required by the property. Self sufficiency was the key element to the success of a cattle property especially in semi isolated rural areas(early Kiewa Valley) and the larger the property ie. stock holding the greater the need..This blacksmith's hammer would not only have been used on the cattle property of the pioneer family (the Ropers) in the earlier part of the 1900s but also up in the Bogong High Plains grazing region to maintain the constant refurbishment/maintenance of horse shoes and other metal items. Depending on each property's requirement for blacksmith's service, one from the larger property could have serviced all the valley's requirements.Large blacksmith's hammer has a handle of twisted iron encircling 19 cm. hammer head. It has a round striking end and a wedge shaped punch end.V.B. [in dots ]tools, horses, punch, blacksmiths

The memorial for Frederick and Louisa Hammerly who lost their son Alfred in an accident. The memorial is a piece of tapestry.A sepia photograph of a piece of memorial embroidery. It was done in memory of Alfred Hammerly. His photo is in the centre of the piece. This photo is mounted on to black cardboard.aitkens gap, sunbury, hammerly, alfred, louisa, frederick, sunbury football club, sunbury cricket club, sports, cricket, football, excelsior memoriam, george evans collection

Curved, wedge-shaped hammer head, with square nose and tapered, flattened tail. Made of steel?No visible markingstrades, tools, hammer, steel, nails, tool

Catalogue of hand tools - screwdrivers, planes, hammers, knives, spirit levels, hacksaws, measuring tapes, gardening tools, lawn mowers, with price list.Printed Catalogue of hand tools.turner industries, lawnmowers, tools

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.blacksmith made; hand-hammered relief groove. Well used - top mushroomed out. timber splitting, blacksmith made, churchill island heritage farm, olinda, shady creek, wilfred dungan collection, wedge

purpose made with large spanner at one end of handle and single claw hammer at other endcombination, spanner, claw, hammer, tool, tools, churchill island, farm