TACL-Tractor Appliance Company Limited TACL rail tractors manufactured by Malcolm Moore of Port Melbourne Located in the Parishes of Moondarra and Telbit, Gippsland, the tramway terminated at Collins Siding on the Moe Walhalla 2'6"gauge branch of the Victorian Railways. Its construction by the Forests Commission of Victoria was to facilitate the extraction of timber from the Southern and Western slopes of Mount Erica and to replace the outlet tramways destroyed during the disastrous forest fires of February 1926. Tyers Valley Tramway The line, following the Eastern arm of the river, passed Ingrams Siding (7m.) to terminate at a forest area, known as "Ten Acre Block", 8m. 60c. from Collins Siding. The western branch of the line followed the Western Tyers Valley to Growlers Creek, 13m. 40c. from Collins Siding. THE T.A.C.L. TRACTORS at Tyers Valley tramway. On the 19th January 1928, T.A.C.L. locomotive, purchased from Tractor Appliance Co. Ltd. (Malcolm Moore), was delivered. This unit had a 20 h.p. Fordson engine coupled by a chain drive to the two axles, providing a tractive effort of approx. 2000lbs. Wheelbase was 5’ and weight was four tons. It was intended that the two tractor locomotives, working with the grade, would deliver timber from the branch lines to Tyers Junction, from which place it would be steam hauled out to the Collins Siding transfer point. Following a breakdown of the steam locomotive, haulage during the early months of 1928 was carried out by the T.A.C.L. unit, supplemented by the Nattrass, which was, by this time, becoming unreliable. During April 1928, after ensuring that no suitable locomotive was available in Australia, an order was placed with the Climax Manufacturing Co., U.S.A. for the supply of a geared locomotive. A second T.A.C.L. engine was purchased during May and, on the 27th, the local mill owners, having obtained running rights on the tramway, commenced haulage with the Harman. The three tractor units worked the branch lines and transported ballast, whilst the Harman hauled the timber to Collins Siding in rakes of eight trucks (56 tons). The weekly loading of the line for the first, second and third weeks were 54, 62 and 71 trucks respectively. info from : http://www.nmra.org.au/tyersvalley/Tyers-Tram.html Historic - Industrial Narrow gauge Railway - Timber working - Rail Tractor used by the the Forests Commission of Victoria on the Tyers Valley TramwayRail Tractor with Fordson engine coupled by a chain drive to the two axles - made of steel and wrought ironerica sawmill, puffing billy, tacl, rail tractor, tractor appliance co. ltd. (malcolm moore), industrial narrow gauge railway, tyers valley tramway, forests commission of victoria

Established in 1858 by William Chambers and his son Phillip, the Chambers family have been making wine at Rosewood for over six generations. Black and white photograph of an iron roofed building with stainless steel tanks on one side, and sign in front.On sign in photo: "You've found us. The home of Chambers." On back of photo: "Chambers Rosewood" "78% p 27"wineries, north east victoria, wine industry, chambers winery, chambers rosewood, rutherglen winery, rutherglen australia, winemaker

Established in 1858 by William Chambers and his son Phillip, the Chambers family have been making wine at Rosewood for over six generations.Black and white photograph of an iron roofed building with stainless steel tanks on one side, and sign in front.On sign in photo: "You've found us. The home of Chambers." On back of photo: "140% [upper case D in small circle] Chambers 'Rosewood' "wineries, north east victoria, wine industry, rosewood cellars, chambers winery, chambers rosewood, rutherglen winery, rutherglen australia, winemaker

Belonged to Wandin Sebire, 1867-1960. Transferred from his house to Mont De Lancey in 1993.Iron framed single bed with wooden side frames and a steel mesh base. Metalwork painted cream.beds, furniture

This iron was used when electricity became available. It was possibly used for smaller items that didn't require a lot of time. Residents of the Kiewa Valley used irons for pressing the family's clothes and linen - usually by the women as it was considered to be part of their domestic duties.A small electric iron, for heating only. "Hot Point" brand with a steel body and a black plastic (or could be Bakelite) upper body that is chromed. The electric cord is detachable and not with the iron.Hotpoint Cat No. 6266 G7 Watts 575 - Volts 240. Ps 7 Made in Australiairon, laundry, domestic, pressing clothes, household, electric

Caulking iron short offset spike iron used for setting down narrow seams in awkward places like inside cornerSSolid steel marked on one side. 140mmLflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Steam Locomotive - 2-6-2 2-6-2 Beyer Peacock & Co Garratt NGG16 No.129 build No. 7430 Loco - Garratt NG129 Date acquired - 1996 Acquired from - South African Railways State when acquired - Work done - Currently being rebuilt to 2 ft 6 in (762 mm) gauge as a backup for G42. Expected Return to service in 2019. Restored to service - Current State - Currently being Rebuilt It was built by Beyer Peacock & Co of Manchester (builder's No.7430 of 1951) to their "Beyer Garratt" patented design of articulated steam locomotive. The South African Railways Class NG G16 2-6-2+2-6-2 of 1937 is a narrow gauge steam locomotive. Between 1937 and 1968, the South African Railways placed 34 Class NG G16 Garratt articulated steam locomotives with a 2-6-2+2-6-2 Double Prairie type wheel arrangement in service on the Avontuur Railway and on the Natal narrow gauge lines - The third order was for a further seven locomotives in 1951, numbered in the range from NG125 to NG131, once again from Beyer, Peacock. These and the subsequent locomotives had welded water and coal bunkers and flat-topped water tanks with rounded top side edges. The Beyer, Peacock locomotives ordered by the SAR, numbers NG109 to NG116 and NG125 to NG131, were shared more or less equally between the Natal and Avontuur lines Historic - Overseas - South African - Narrow Gauge Railways - Steam LocomotiveSteam Locomotive - 2-6-2+2-6-2 Beyer Peacock & Co Garratt NGG16 No.129 build No.7430 made of steel, wrought iron and ironpuffing billy, beyer peacock, beyer peacock & co garratt ngg16 no.129 build no.7430, narrow gauge, steam locomotive, garratt locomotive, garratt ng129, garratt ngg16 no.129

This iron is typical of the electric irons used in the 1950s. It didn't have a thermostat like the irons that followed so care had to be taken not to leave it on too long. Women in their domestic role used irons.The Kiewa Hydro Electric Scheme commenced in the late 1940s when Mt Beauty township was created. Amongst the shops in the main street was an SEC shop which sold electrical items. "Creda" Electric Iron with plug-in cord. A metal steel base iron with a wooden handle and a thumb rest. The handle is bolted onto the iron with 2 large screws. The cord is coloured maroon except where it is repaired with black tape. The cord socket plugs in behind the handle of the iron. CREDA Cat. No 6; Man. No.; Volt 200; AMPS 2.7 iron, laundry, household, electric, pressing clothes, domestic

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron short offset spike iron used for setting down narrow seams in awkward places like inside cornerSSolid steel marked on one side maker Ward Sheffield.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron flat edged medium set iron. These irons were invariably used when setting down a plank seam where wood butted to steel like the coaming of a deck house.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A vintage steel branding iron with two prongs with the brand H S on one end and a ring at the other end. It was used to brand livestock on farms. It is the middle iron in the attached photo of three irons.H Sbranding irons, tools, farm equipment, livestock equipment

A vintage steel branding iron with two prongs with the brand T Q one end and a bent ring at the other end. It was used to brand livestock on farms. It is the bottom iron in the attached photo of three irons.'T Q' brand on one end.branding irons, tools, farm equipment, livestock equipment

Used domestically, though any extra butter could have been sold to neighbours. Many families kept a cow or two for milk etc. Cream needed to be at least 2 days old - the thicker the better. The handle was turned until the cream turned to butter,the whey was poured off and the butter washed in cold water until the water ran clear. Generally salt and bicarbonate of soda were added. Two pats were used to form butter into 1lb lots. This butter was most typically meant for consumption by the family, but in some instances it may be taken away for consignment by commercial receivers of dairy produce. This item is typical of the period when food processing was done at home. It would have been before the time of mass food processing factories.A metal butter churn with cast iron hand crank on side. The bowl container has a steel lid. It sits on a tripod stand.dairy butter-churn farming

A tyre bender is used to bend and shape metal rims for wooden wagon wheels. This tyre bender’s model first appeared in the Day Bros catalogue in 1884 as the “Giant” model. The catalogue of 1883 only showed a lighter duty model called the “Lion”. It can be assumed that this later “Giant” model was a heavy duty improvement over the 1883 "Lion" and other smaller models which were still being advertised for sale in 1884. The Day Bros foundry, makers of this tyre bender, was operating as the manufacture of wheel right and blacksmith tools and general machinery in the 19th century in the USA and successfully exported their goods all over the world. Wagon tyre benders would have been very common circa 1850-1920, so there were probably many makers over the years. Early on, it would have become clear to the blacksmiths about which designs worked best so, eventually, the various makers would have made similar products to each other. This tyre bender was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The tyre bender is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The machine or tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Steel tyre bender mounted on timber base, used for wagon wheel steel rims. Made from cast iron and steel, double geared with four cogs to unite the upper and lower steel rollers. There are adjustable guide collars to keep the iron in line while it is being bent. It can also be used with two cranks for heavy duty work utilising the use to two operators. It is the Giant model, made in 1884 by Day Bros. of Philadelphia. This tyre bender once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria. “DAY BROS. PHILAP. PA” cast into the side of machineflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, machinery, wagon wheel, wheelwrights, blacksmith, steel rim wheels, tyre bender, tire bender, the giant tyre bender, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, wagon tyre bender, day bros. philadelphia pennsylvania, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall

The type of rack used in the Aeradio buildingSteel channel iron structure grey colour with series of bolt holes to mount radios. Free standing with anchor bolt holes in base.

Used to make audible click when salutingBoot OrotectorsHorse shoe shaped heel proyector. Nail holes X 5. Mild steel. Angle iron protection also to outside of heelprotectors

Used to make audible click when salutingBoot OrotectorsHorse shoe shaped heel proyector. Nail holes X 5. Mild steel. Angle iron protection also to outside of heelprotectors

The press was in a show case in the Library of the Ballarat Institute of Advanced Education and the the University of Ballarat. It came from the Education Media Unit.Black enamelled iron. E.M.U. (standing for Education Media Unit) presses onto paper Brass circular head on steel disc base.Maker's name e m u press, library, ballarat institute of advanced education, education media unit, seal

A vintage long steel branding iron with four prongs with the brand of a circle with a T in the middle one end and a bent ring at the other end. It was used to brand livestock on farms. It is the top iron in the attached photo of three irons.A circle with a 'T' inside brand on one end.branding irons, tools, farm equipment, livestock equipment

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of it major industries. Many of the italian families were involved in tobacco farming.Historical: This equipment was used on one of the first tobacco farms in the Kiewa Valley at Mongans Bridge. Provenance: This tobacco farmer came from Italy and was sponsored to visit a tobacco farmer in Myrtleford to learn how to grow tobacco so that he could transfer those skills to his own farm in the Kiewa Valley.Wooden, panelled red (painted on outside) rectangular box on side are iron bars with steel reinforcements around the box, near the top and bottom on 4 sides and across the middle on the 2 ends and front (not back). Diagonal steel between bottom and middle iron on the front. Ends: 2 iron bars from the ground curved up to top holding an iron rectangular beam that goes from end to end. Midway of beam is a vertical long screw at the top of which is a cross formation of 4 iron rods forming a handle for turning. Inside, the screw is attached to an iron frame which is attached to a wooden panelled platform enabling it to be raised or lowered as required.tobacco. mongans bridge. kiewa valley. hand press. parmesan. rossaro. lorenzi brothers.

In 1970 the US M29 81mm mortar replaced the British 3-inch mortar which had been used by Australian forces since WW2 .The Australian designation is F2 81mm Mortar. It remains in use today. Maximum range is approx. 3,600m with the 4.27kg M362A1 projectile. Effective bursting area is approx. 34m in diameter.81mm Mortar bomb of steel and cast-iron construction with 6 tail vanes. The example shown here is a High Explosive bomb with a dummy fuse.Dummy Fuse A66 81mm 362A1 N63(4 H.E.S 1-HX-7-L&S/V- 66-M141mortar

Small white business with the name Keith Butler, Production Superintendent. The Broken Hill Proprietary Co. Ltd. (Iron & Steel Works) Newcastle. Australia.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, keith butler, the broken hill proprietary co ltd

These BFK Butterfly chairs were used in the living room in Robin Boyd's first family home in Camberwell. The BKF was originally designed in Argentina, later becoming popular throughout the world.A pair of BKF Butterfly chair. Black iron/steel. They have a canvas sling hung from the frame's highest points, creating a suspended seatwalsh st furnishings, robin boyd

In 1934, the Victorian Association of Braille Writers annual report advised that it had acquired a Crabb-Hulme Braille Printing Press. Two years in development, the Press was designed by Miss Minnie Crabb (the librarian) and built to her specifications by Mr Hulme. Invented to produce ephemeral material quickly, such as programs, catalogues and newsletters, and provided more opportunities for information to be quickly sent out to Braille readers.Steel and cast iron printing press with two wheels on left hand side and two foot levers to operate a wheel on the right hand side.victorian association of braille writers, braille equipment, minnie crabb

A black camp stove, single burner, which uses alcohol fuel. It is made of iron and has a steel reservoir for the fuel. There is a wooden handle for fuel control. Embossed on centre of burner: ”Brilliant / D.R. Patent”.stove burner fuel-stove cooking food-preparation

Of caste iron construction with a wooden handle; a shutter covered opening for hot coals; a wooden knobbed steel lever for lifting the lid. The lid features a funnel Printed on the shutter cover are the words - T. & C. CLARK & CO. WOLVERHAMPTON On the top of the funnel is a moulded lined pattern.