The Golden Eagle is an original design by Geoff Richardson. Geoff commenced gliding in the early days of the sport circa 1933 in Melbourne, flying at Coode Island and Mt Frazer. In 1934, he began construction of a secondary type glider but scrapped it upon realizing that a better design was needed. He conducted further research and came up with a sailplane of similar size and general arrangement to the Grunau Baby but with a “Gull” wing using a Gottingen 535 wing section (the same as for the Grunau Baby). Geoff did all the technical calculations himself and even made up and tested a Casein glue for the construction. Geoff competed construction of his new sailplane (which he called the “Golden Eagle”) in 1937 and it was test flown at Laverton at the western edge of Melbourne in September 1937. On the same day, at Laverton, the Gliding Club of Victoria flew its new Grunau Baby 2 sailplane which it had imported as a finished machine from Edmund Schneider in Germany. The Golden Eagle was found to fly well, having a similar performance to the Grunau Baby. In the 1950s, the Golden Eagle was modified by rebuilding the front of the fuselage to enclose the cockpit with a Perspex canopy. A landing wheel was incorporated behind the skid. Spoilers were added to the wings and a trim tab to the elevators. The Golden Eagle has been flown with the VMFG (Victorian Motorless Flight Group) for most of its long life. When donated to the Australian Gliding Museum in 2016 by Alan Patching it was probably the oldest, continuously airworthy glider in the world. Having regard to the historical significance of the Golden Eagle, the Museum has decided to not to fly it anymore to avoid risk of loss or damage. The exhibit is of great significance for Australian gliding history – the Golden Eagle is a flyable 1930s aircraft in excellent condition that was designed and built by an Australian gliding pioneer. Single seat wood and fabric sailplane finished with white wings, tailplane and rudder and yellow fuselage Registration letters “FC” on fuselage nose port side, Australian flag, Vintage Gliders Australia and VMFG decals on rudder, “Golden Eagle” lettering in red on each side of the fuselage below the canopy, Aboriginal flag decal on port side of fuselage below the canopy. australian gliding, glider, sailplane, golden eagle, richardson, patching, vmfg, victorian motorless flight group

Textiles, yellow cotton cushion cover. One side overlayed by tapestry weave fabric. Drawn thread work has created an all over 12 X 12 pattern of 3 cm squares. Each square has an embroidered wheel spoke pattern of yellow embroidery cotton. Machine made. Unfinished.textiles, domestic, cushion cover

60lbs rail that was used throughout the Victorian rail network. In 1887 Gibbs, Bright and Co. had a contract with Victorian Railways for railway and canal construction and supply of Krupp Rails. Gibbs, Bright and Co were merchant bankers and shipping agents and merchants who where also Directors of the GWR ( Great Western Railway ) and the Ship The "Great Britain" in England Gibbs, Bright and Company had principally been involved in shipping and trading, mainly in the West Indies, but following the discovery of gold in Victoria they established an office in Melbourne and soon became one of the leading shipping agents and merchants in the Colony. They expanded into passenger shipping and soon established offices in Brisbane, Sydney, Newcastle, Adelaide and Perth as well as launching passenger services between England, Mauritius and New Zealand. Gibbs, Bright also held a number of financial agencies from British mortgage, finance and investment companies as well as representing several British insurance companies in Australia. In addition they conducted a growing import business as well as an export business that included livestock, dairy produce, wool and flour. Also the company played a substantial part in the development of Australia's mineral resources, starting with lead in 1895, and later venturing into tin, gold, copper, cement and super phosphates. In Australia, after WWI, many of the larger companies were managing their own import and export so Gibbs, Bright and Company tended to focus its Agency business on smaller companies while expanding their interest into other markets such as timber, wire netting, zinc, stevedoring, road transport, marine salvage, gold mining as well as mechanical, structural, electrical and marine engineering. The Company's shipping interests continued to grow as well and still formed a major part of its business. In 1948 the parent company in England took the major step from tradition when they changed the business from a partnership into a private limited company. The name was the same, Antony Gibbs and Sons Limited, and in practice the effect of the change was very little. Some of the firm's branches and departments had already become limited companies and the formation of a parent company simplified the structure. The Australian operation was in time changed to Gibbs Bright & Co Pty Ltd in 1963. In 1848 Alfred Krupp becomes the sole proprietor of the company which from 1850 experiences its first major growth surge. In 1849 his equally talented brother Hermann (1814 - 1879) takes over the hardware factory Metallwarenfabrik in Berndorf near Vienna, which Krupp had established together with Alexander Schöller six years earlier. The factory manufactures cutlery in a rolling process developed by the brothers. Krupp's main products are machinery and machine components made of high-quality cast steel, especially equipment for the railroads, most notably the seamless wheel tire, and from 1859 to an increased extent artillery. To secure raw materials and feedstock for his production, Krupp acquires ore deposits, coal mines and iron works. On Alfred Krupp's death in 1887 the company employs 20,200 people. His great business success is based on the quality of the products, systematic measures to secure sales, the use of new cost-effective steel-making techniques, good organization within the company, and the cultivation of a loyal and highly qualified workforce among other things through an extensive company welfare system. From 1878 August Thyssen starts to get involved in processing the products manufactured by Thyssen & Co., including the fabrication of pipes for gas lines. In 1882 he starts rolling sheet at Styrum, for which two years later he sets up a galvanizing shop. The foundation stone for Maschinenfabrik Thyssen & Co. is laid in 1883 with the purchase of a neighboring mechanical engineering company. In 1891 August Thyssen takes the first step toward creating a vertical company at the Gewerkschaft Deutscher Kaiser coal mine in [Duisburg-]Hamborn, which he expands to an integrated iron and steelmaking plant on the River Rhine. Just before the First World War he starts to expand his group internationally (Netherlands, UK, France, Russia, Mediterranean region, Argentina). info from The company thyssenkrupp - History https://www.thyssenkrupp.com/en/company/history/the-founding-families/alfred-krupp.htmlHistoric - Victorian Railways - Track Rail - made by Krupp in 1888Section of VR Krupp 1888 Rail mounted on a piece of varnished wood. Rail made of ironpuffing billy, krupp, rail, victorian railways

Saw Bench - New Record Saw Bench Timber framed with steel wheels, belt driven saw blade powered by a Rosbery internal combustion engine. The Rosebery Engine No C28437 R.P.M 800 H.P. 6 Manufactured By Westinghouse Rosebery Pty.Ltd. Sydney Rosebery Engine Works Ltd began as the engine and pump manufacturing division of Buzacott & Company, and in 1923 became an incorporated company. In 1935, Westinghouse gave Rosebery Engine Works the right to manufacture and sell nearly all Westinghouse products. The name of the company then changed to Westinghouse Rosebery Ltd From the late nineteenth century, petrol engines gradually supplanted steam engines for running a wide range of machines, and in turn petrol engines were largely supplanted by electric motors. The Champion was a successful small petrol engine made by the large Sydney company, Westinghouse Rosebery, based on the American-designed Fuller and Johnson engine. With hopper cooling and a fuel tank between the skids, and weighing only 240 pounds (109 kg), it was easy to mount on wheeled transport, making the Champion a self-contained mobile source of power. Engines of this type were used in rural areas for driving chaff cutters, small saw benches, pumps and orchard sprayers. These engines were also commonly used in both rural and urban areas for powering concrete mixers. Both Westinghouse Rosebery in NSW and Toowoomba Foundry in Queensland made these engines in large quantities, beginning in the 1920s when tariff protection made local manufacturing viable. The production of small petrol engines continued in Australia until the 1970s, when reduced tariff protection led to increased competition from cheaper imported engines. Historic - Industrial Timber working - belt driven saw blade powered by a Rosbery internal combustion engine. Timber framed with steel wheels, belt driven saw blade powered by a Rosbery internal combustion engine. The Rosebery Engine No c28437 R.P.M 800 H.P. 6 Manufactured By Westinghouse Rosebery Pty.ltd. Sydneysaw bench, puffing billy, new record, internal combustioin, westinghouse rosebery pty.ltd., rosebery pty, internal combustion engine.

Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112 The Phoenix Foundry (1857-1906) fabricated iron and brass products - including engines and pumping gear for the mining industry, locomotives, steam rollers, water pipes, water gauges and diverse small items. Throughout its operation the business was located at premises on Armstrong Street, Ballarat . Background In 1852, at the age of thirty-three and after a year of operating his own engineering business at Williamstown, Lancashire-born blacksmith and engineer George Threlfall (1819-1897) arrived on the Sebastopol gold plain and immediately undertook blacksmith work repairing picks and tools for the miners. Little did he know that this fledgling business would be the genesis of the most iconic business of nineteenth-century Ballarat. At approximately thirty-nine years of age, English mechanical engineer Richard Carter (c1814-1883) came to Australia on board the Arrogant - arriving in Melbourne on 19 April 1853. He soon travelled to the Ballarat goldfields. Born in the year 1830 in Belfast (Ireland), mechanical engineer William Henry Shaw (1830-1896) arrived in Australia in October 1853. He worked briefly with George Threlfall at Sebastopol, then moved to Geelong to manage the small foundry of Frederick Moore. Twenty-four year old English-born iron moulder Robert Holden (c1831-?) left his home in Belfast (Ireland) in late 1854 and travelled from Liverpool to Melbourne on board the James Baines - arriving in February 1855. Afterwards he joined his brother-in-law William Henry Shaw in Ballarat. History Foundation to Incorporation In March 1857 George Threlfall joined in business with Richard Carter, William Henry Shaw and Robert Holden. They relocated Threlfall's successful engineering enterprise from Sebastopol to new premises in Armstrong Street, Ballarat. This business was then known variously as the Phoenix Iron Works Company, Phoenix Foundry or Messrs Carter and Co. By 15 April 1857 they were advertising that they were open for business as engineers, millwrights, boiler makers, smiths, iron founders and brass founders. In January 1858 George Threlfall left the partnership. Incorporation to 1889 1890 to Closing locomotive Y112 Builder: Phoenix Foundry, Ballarat Builder’s Number & Year: 238 of 1889 Designer: Kitson & Co Wheel Arrangement: 0-6-0 No. in class: 31 Entered Service: 24 July 1889 Taken off Register: 11 May 1961 The origins of the Victorian Railways Y-class lay with the decision by Kitson & Co, Leeds to place a 0-6-0 freight locomotive on display at the Centennial International Exhibition, Melbourne in 1888, together with a 2-4-2T suburban passenger locomotive. This marketing initiative proved successful as the Victorian Railways were clearly impressed with these machines, with both purchased after the exhibition and becoming the patterns for new standard locomotive types. Thirty examples of the 0-6-0 heavy freight design were ordered from the Phoenix Foundry, Ballarat, becoming the Y-class for main line heavy freight duties, while the 2-4-2T design became the E-class for Melbourne suburban passenger duties (represented by preserved locomotive E 236). The Y-class prove successful in service and accrued high mileages. They were inevitably superseded by more modern and powerful steam locomotives and a number cascaded into shunting and yard pilot duties, often with the addition of shunters steps along both locomotive and tender. Y 112 was one of the last in service when withdrawn in 1961. Fortunately it was saved for preservation and plinthed in central Ballarat, ostensibly in commemoration of Phoenix Foundry. I understand it is owned by the Sovereign Hill Museums Association. During the 1980’s, Y 112 was leased to Steamrail Victoria and restored to operation at an industrial site in Ballarat. Y 112 features an attractive lined apple green livery and has performed various rail tours around Victoria since restoration. It is normally based at the Steamrail depot in Ballarat East. Y 112 is the only 19th century design in operational condition in Victoria and as such is one of the oldest working steam locomotive in Victoria . Historic - Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112Phoenix Foundry Plate Oval shaped plate with an image of a phoenix centered at the top with lettering surrounding it.Phoenix Foundry No 238 Ballarat Company Limited 1889.puffing billy, phoenix foundry, ballarat, locomotive y112, phoenix foundry plate - replica

Munro Engineers Pty Ltd, Handilift Stacker & Loader' The Land on which the Menzies Creek railway station and Museum are built on was once apart of James Hermon's & his son William Hermon's property on which this Munro Handilift Stacker & Loader was used. Historic -Industrial Tool - Handilift Stacker & Loader - used on Jame's Hermon's property on which the Menzies Creek Railway is built on Munro Engineers Pty Ltd, Handilift Stacker & Loader made of steel and wood and wrought ironMunro Engineers Pty ( symbol map of Australia ) Ltd, Ballarat Vic. On side - No. 3147 On wheel - no, 2052puffing billy, munro engineers, handilift stacker & loader, hermon, menzies creek

This Jones sewing machine was one of the few sewing machines that accompanied the Germans who were deported from Palestine in 1941 to Australia where they were interned at Tatura. The machine was owned by Nelly Wied (nee Glenk). See notes in Item receipt form.Lid is plywood constructed with domed top. Brown handle on top and a clip each end to fasten to machine base. Machine is on a wooden base with clips on each end to fasten to lid. Right hand side of machine has a rectangular hole with wooden lid and brown wooden knob. To keep accessories in. Machine is made from metal, painted black and has fancy gold patterns on front right, "Jones" in gold and gold design around the metal base. It has a silver turning wheelJONESjones sewing machine, palestine germans, german templers, palestine internees, templer internees, nelly wied, nelly glenk, helmut glenk, tatura internment camps

Jones Lock-Stitch Sewing Machine made of black painted heavy metal with gold-leafed pattern on the fiddle-shaped base and along the upper arm. Four claw feet moulded on to base and handle attached to wheel - metal workings visible under hollow base.Maker's insignia on centre of base in gold and green circle reads "JONES MACHINE" around circumference and 'HAND" in central shield.machine, sewing, hand operated

Sewing machine, hand operated with transverse shuttle, spool wound by running on to a large wheel. Serial no. S6362996|Wooden cover with inlaid pattern on top, metal handle. Painted black gold leaf pattern on arm and plate.Wertheim written in gold on front and a pattern also around metal keyhole.|WERTHEIM FRANCFORT impressed on oval medallion depicting workman with hammer on shoulder.textile machinery, sewing, domestic items

Belong to Mary Cruickshank, Peter Simmenauer's mother-in-law.Victa motor mower UTILITY series 70. Four rubber wheels, front smaller than rear. All wheel adjustable for height. Two stroke motor with a cord pull start. Petrol tank is mounted on top of motor with transfer advising the use of BP Zoom Green petrol mix. Plastic tube connects tank with top of carburetter on motor. Long handles which can be collapsed for storage. Breather tube and air filter mounted on handle together with controls for starting and running.VICTA - cast into housing|Series 70 - transfer|UTILITY - orange and white transfer on front of motor.|BP Zoom Green - transfer on tank|CAUTION Transfer on back of tankmachinery, engines - internal combustion, domestic items, gardening

Toy Singer sewing machine - cast metal and plastic with needle and operating mechanism. Hand operated. Finished in dark beige.'Singer' on arm of machine. Both sides has a red, white and green 'S' logo near wheel. Underside stamped with 'Singer 22851'; 'the Singer Company' under the handle and Great Britain.toys, mechanical

WERTHEIM sewing machine transverse shuttle. Hand operated with thread winding attachment, uprights for reels of thread, tension adjuster and sewing mechanism. Serial no. S6005404|Handles folds into wheel for storage. Has a metal base with pearl insert on outer edge. originally painted black with gold scroll work - base is hinged to a wooden base. Wooden veneered cover stored separately. Aluminium label on body of machine with 'Werthiem Frankfort' around a figure sitting - all embossed.Wertheim Frankfort|Pes. Gesch and emblem on bobbin boxtextile machinery, sewing, domestic items

Small hand operated sewing machine with wooden handle to turn wheel which operates mechanism. Black iron baseTodd's Champion of Englandtextile machinery, sewing, domestic items

Negotiated by Jean Field (former Secretary of Society) Cost $89.00Wooden spinning wheel on standhandcrafts, spinning

Metal painted black with gold leaf design decoration. Large wheel with handle. Circular base on sewing area. Set on four claw legs. In working order.domestic items, sewing, textile machinery

This plough was hand wrought on a forge by Thomas Gibbs and used by him in ploughing competitions. It is a good example of forge welding. It include some 'found' items.Small horse drawn long board plough with one wheel and one shear.It is hand made on a forge and includes some 'found' objectsrural industry, agriculture

Large caste iron wheel on which two knife cutters are fitted - hand rotated - material to be cut is fed through a canter-levered wooden box - reduction gears are used to ease the effort for the person operating it. All of this is mounted on a caste iron frame. Capable of cutting 'I/2 . 1/2 Chaff'|Similar one sold by Welch, Perrin & Co P/L in 1929 for 8 pound .The 'Bentall' Chaff Cutter moulded on the reduction gear cover. 'Bentall Improved (or Patented?) Chaff Cutter 913 Heybridge, Maldon, England' - on the body and wheel.rural industry, livestock

Item was handed to Society members in the late 1970s by Mr. Davey.Green painted metal four legged stand to which is attached a large red painted wheel with two cutting blades and a handle.A green wooden chute extends out and two large cog wheels are at the start of this. See NA1416 for comments.The 'Bentall' CPB chaff cutter.rural industry, livestock, farm machinery

Single farrow plough or spring tooth orchard harrow with wooden handles. It is minus its jointer.GU8 on wheel|33 1/2 on rear shear.rural industry, agriculture

Small, very early sewing machine with spindle handle which moves upper arm and allows needle to drop between teeth. Screws onto a bench.Wheeler & Wilson MFG.Co. New York Union Square.domestic items, sewing

Mr Blaickie an Uncle of Mr S.W. McDonald, Local ResidentBlack and white photograph, mounted on grey cardboard, of Blackies Traction Engine and Threshing Machines - 16 Men in photo - child sitting on wheel- Bags of chaff in Foreground - Tree covered hill in background.On back of photo: "Blaikies Traction Engine & Thresher. Taken Porepunkah 1900 early. Blaikies were Uncles of Mr [illeg] McDonald. A Mr Blackies on engine"agriculture, threshing, blackie, traction engine, farm equipment

Believed to have been made 1939/43. In 1904 the British Army adopted a new General Service (GS) pack saddle with an adjustable tree, known as the Mark V pack saddle. The main innovation was the adjustable tree created by having the front and back steel arches jointed to the wooden sidebars, which allowed them to turn to adjust to the size of the back of whatever animal carried the saddle, from the largest horse to the smallest donkey, and eliminated the need to manufacture saddles in different sizes. The saddle could be adapted, by the addition of hanging bars, or universal slats, to carry a wide variety of stores, tools and equipment, and also wounded men. The GS pack saddle was used in both world wars by both the British and Australian armies. The use of pack saddles was especially important in the campaign in Palestine during the First World War where wheeled transport was often not an option. Each machine gun carried by light horse units was transported on a pack saddle, and was accompanied by a second pack animal carrying spare ammunition. During the Second World War pack animals were routinely used by patrols, and larger units such as Norforce, in remote areas of northern Australia. The saddle shown here has two separate girths, which crossed under the animal's belly. Most later versions of the saddle used a shorter single girth buckled to a 'V' attachment, which was in turn buckled to the sidebars. Use of the 'V' attachment gave greater strength and stability to the saddle, and decreased 'rocking' of the load.

Vinyl exterior and paper pages of text and pictures.The finest flying machines of the day wheel their way around a pylon in artist Paul Lengall'e's conception of the worlds first great air meet at Rheims, France.

The Bridge Hotel was located in Bridge Street. The timber paling fence stopped people falling off the bridge. Next to the hotel was the premises of Wheeler & Wilson Sewing Machines.bridge hotel, wheeler & wilson, building, commercial, hotel, ballarat, bridge

Black metal sewing machine with gold trim on wooden base. Wooden base has a compartment for cotton, needles, etc. Swing machine has handle on the wheel for operating. Arched Wooden Cover.Singer Singer Manufacturing Co Manufactured in Great Britainsewing, sewing machine, hand-operated, hobby

Hand operated Singer sewing machine, painted black metal with wooden handle on wheel Sits on black rectangular base, with no wooden frame.see photos (brand, very faded)sewing machine, sewing, singer, hand-operated

in 1887 six Ashford Litters were purchased by St John Ambulance Association after Lady Janet Clarke (of Rupertswood) and her friends raised enough money to allow these items to be ordered. These were Victoria's first official ambulances. The litter consisted of a two wheeled undercarriage with elliptical springs which supported a stretcher. It has four legs which support the carriage when stationary but fold up to form handles so that one person could push the machine while another pushed. Four Ashford Litter ambulances were located at the Russell Street, Little Bourke Street, King Street and West Melbourne police stations. Another was located at the Melbourne Town Hall on Swanston Street and from 1896 the sixth was located at the Eastern Hill Metropolitan Fire Brigade station. Initially is was expected that police and fire fighters would take patients to hospitals if required.Two wheeled ambulance cart with sprung wheels.ashford, ashford litter, st john