Wooden mallet. Natural wooden construction, possibly aboriginal club Previously #140 Timber knots on head end. Approx 50cm long.

Caulking is the use of cork or other substances to seal the seams and joints of the vessel to make them watertight. Caulking lasts for quite some time but eventually dries out and needs to be replaced. A mallet or hammer is often used with a caulking iron to drive it along the seams. The caulking iron’s blade is tapered to be narrower at the tip to make it easier to remove it from the joint. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Caulking mallet; a thick wooden handle with a round ‘T’ cross-bar near the end. Metal reinforcing is added around the ends of the head. Both sides of the wooden head are flared outwards towards the end. The head is reinforced where it intersects with the handle and around the ends of the head just above the tips. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, caulking mallet, caulking iron, laurie dilks, l dilks, port and harbours melbourne

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron narrow pointed jerry iron used to jerry or chip out the old pitch and oakum from corked seams. It was held at 45 degree angle to the seam and hit with malletflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron long heavily off set broad set iron with this iron not having a flared head a hammer was used as the driving force. Used in places where the user could not come at it with malletflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

From the home of the late Mr and Mrs W.J. Sebire, C1890Beaten brass dinner gong with silver trim on two supporting horns at side, mounted on a wooden base. Mallet is silver with hanging ring and leather surround on knob. Has a leather hanging strap.gongs, gong strikers

This gavel (or mallet) and stand was used by the Shire of Strathfieldsaye Mayor or a presiding officer of a meeting to signal for attention or order.Wooden gavel with carved handle and stand. Front of stand has enameled circular badge containing the Shire of Strathfieldsaye coat of arms with words Shire of Strathfieldsaye Victoria 1866.Shire of Strathfieldsaye Victoria 1866.shire of strathfieldsaye, city of greater bendigo administration item

This gavel (or mallet) and stand was gifted from the Provincial Cities and Towns Association of Victoria to mark the centenary of the City of Bendigo.Wooden gavel with carved handle and stand. Front of stand has engraved plaquePresented to / The City of Bendigo / to mark the / Centenary of the Municipality / as a City / By the Provincial Cities and Towns / Association of Victoria / 21st July 1971city of bendigo

Bell was presented to the Melbourne Legacy Club by the departing president E.R.F. Serman in 1929. It was used during Comradeship Committee meetings.E.R.F. Serman was the Melbourne Legacy Club president in 1928-1929. Comradeship Committee meetings were very important to the Legatees.18 Pounder Shell casing that has been polished and had a small brass hook welded to the base. The casing has been split and bears the signs of being hit with a hammer. There is an inscription engraved on the front. The shell is hung from a brass arch which has been mounted to a wooden base. Two small brass hooks on the base act as a mount for the mallet. The brass arch and hooks are attached to the wooden base via flat head screws from the underside. The mallet is constructed of a brass rod with a felt head.Presented to the Melbourne Legacy Club by E.F. SERMAN PRES.1928-9comradeship, committee, legatee event

This is the sixth in a series beginning with Cat No 8255 showing the progress towards the Restoration of the Bendigo Cenotaph over the Bendigo Creek. All in the photos are Bendigo RSL Committee personal except Councilor Mary Hall. .1) People from left to right. Rex Willis, Roy Thurlow, Max O' Haloran, Jack Plant, Cr Mary Hall. .2) People from left to right, Jack Barnes, Rex Willis, Max O' Haloran, Norm Smart, Cr Mary Hall, unknown. .3) The wording on the sign. City of Bendigo. Project: Restoration of the Cenotaph. Consultants. Architect. Robinson LOO WYSS & Schneder PTY LTD. Engineer. R Kelleher & Associates. Bridgework. TE & FA HPD. Cenotaph Stone Mason. Lodge Bros PTY LTD. Builder. HF. Yuncken PTY LTD Bendigo..1) Photograph colour, shows 5 people one with a mallet on the Bendogo Cenotaph. .2) Photograph B&W shows 6 people on the same structure. .3) Photograph colour shows signage at the Cenotaph restoration site..1) On rear in red pen, "Cenotpah - laying last brick", stamped on rear, "17 March 88". .2) On rear in blue pen, "March 88". .3) On rear in red pen, "Renovating Cenotaph Dec 87 - taken by Frank Thomas"brsl, smirsl, cenotaph, bendigo

Caulking iron narrow pointed jerry iron used to jerry or chip out the old pitch and oakum from corked seams. It was held at 45 degree angle to the seam and hit with mallet. Has JN&Co stamped both sides.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Caulking iron (hand made) narrow pointed jerry iron used to jerry or chip out the old pitch and oakum from corked seams. It was held at 45 degree angle to the seam and hit with mallet. 265mm long, 22mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, caulking iron

Bossing Mallet, wooden (Boxwood or lignum vatae) head conical shaped and has three grooves around circumference. End of handle is bulbed, has a groove around circumference and a hole through handle. Used by plumbers for forming lead sheetflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bossing mallet

Used in the timber industry for making split palings. The palings are shaped by hand with the bottom edge put onto the timber and a mallet hit onto the top of the blade. This pre-dates sawn palings. Associated with the timber and household building industry in the Orbost region.A rectangular flat iron blade attached to a wooden handle. The cutting edge of the knife is along the bottom (rather than the end as with an axe). The wooden handle appears to be made from a small tree branch.paling-knife splitting-timber

A wooden chest (.1) containing lawn tennis and badminton equipment, specifically: a tennis net (.2); a badminton net (.3); net posts (.4 - .5, 3 parts each); guy ropes (.6 - .7); stick (.8); pegs (.9 - .12); a fold-out stool (.13); and a mallet (.14). Extra, (probably non-original), objects are: guy ropes (.15 - .16); pegs (.17 - .20); mallets (.21 - .22). Black and green lithographic print on inside of lid features the image of a mixed doubles amtch, with inscription: TENNIS. Materials: Wood, Metal, Lacquer, Cord, Ink, Paper, Rope, Cloth, Painttennis

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron blacksmith made boot iron, this iron is used for setting down deck seams where they are crossed by a steam or water pipe over the deck. They were also useful in other awkward places e.g. around winches. Driving force either mallet or hammer.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A joiners mallet constructed with a mortised handle into a metal shell bound around the striking faces. It is used for tapping wooden joints together such as mortise and tenon joints. There is an unidentified symbol on one side of the metal casting. Wooden striking faces are a reddish colour and could be red gum. Symboljoinery, woodworking, timber forestry branding hammer

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

An unknown couple are outside the nursing home. A man holds a wooden handle, possibly a croquet mallet, while a female in a blue cardigan smiles as she looks on and holds his elbow. It is unknown where these images were taken, however assumed to be at Elanora.1 colour photograph of man holding wooden stick whilst female smiles and looks onelanora home (brighton), recreation, association for the blind

Pittock leather maker's collection * 15 leather maker's awls (120-150mm long), * four chisels (200-245mm long), * one wooden mallet 285mm long. * three timber straight edge marker and plumb line * one bird ornament Items stored in coach builder's box, reference 13000.1.

Train world poster for use in roof ad rack of Ballarat trams. A3 size poster of a Uganda Railway Steam Locomotive (Mallet) drawn by David Frost and details of "Train World" hobby shop. Poster photocopied and glued onto a cardboard cut from another poster. Image added 20-12-2016.trams, tramways, train world, posters, roof ads

A silver table gong. (1/2) Gong section is a recessed disc of beaten silver; (2/2) Mallet is wood with a felt and foam head. Gong disc is suspended from a silver frame anchored in a wood base. Each pillar of the frame is a representation in silver of a tennis racquet. Materials: Silver/Metal, String, Wood, Felttennis

Congues and Mowlam families Images of two families who lived in Cruikshank Street from the 1930s to 1950s. .14 - St Joseph's debutants 1947 Left to right from rear (little girls not included) Shirley Payne, Pat Mowlam, ??, Mary Dawson, Carmel Mills, ??, Norma Davis, Pat Ryan, ??, Shirley Mallet, Joan Bath, ??, Lorraine Murphyfamilies, congues family, mowlam family, barbara gardiner nee hegarty, pat frisby nee mowlam, joan bath, lorraine murphy, shirley mallet, pat ryan, mary dawson, shirley payne, norma davis, religion - roman catholic church (st josephs)

Plaque on the James Mallet Bennett memorial in O'Donnell Gardens, Built in 1926-7 by H B Corbett & Sons and designed by William H Lacey. Accompanied as engineer Sir Ross and Sir Keith Smith on the first flight from England to Australia 1919. Killed in aeroplane crash at Hendon England, 13th April 1922.colour photograph, unmountedIn Honoured Memory of Liet J.M. Bennett MSM AFM, of the Australian Flying Corps who accompanied as engineer Sir Ross and Sir Keith Smith on the first flight from England to Australia 1919. Killed in aeroplane crach at Hendon, England, 3 April 1922.aviators

An e.21st century digital print on canvas, of an original e.20th century sepia photographic print. Image features a group portrait of men, women, and children. Some of the subjects hold tennis racquets, whilst one lady holds a croquet mallet. Behind the subjects is a wooden pavillion. Materials: Canvas/Cotton, Ink, Wood, Metal, Paper, Paint, Linentennis

This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” This hand held, wooden bottle corker would have been used by soft drink or wine producers to insert corks into their bottles to seal the drink inside. It seems it may have had a metal tip on the end of the plunger, as do other similar bottle corkers, because this plunger has a compressed end and a ring shape impressed into the wood a little way up from the tip. How to use the bottle corker … - soak a long, bullet shaped cork in water to soften it - place the bottle corker over the bottle’s neck - insert the cork through the side opening and place onto the metal funnel - push the plunger down onto the cork, forcing it into the tapered, which will squeeze the cork to size as it enters the bottle. Use a mallet or hammer if necessary The design of this bottle corker is very similar to “"Redlich's Apparatus for Corking Bottles", which was invented and patented by Henry Redlich of Chicago, USA, in 1862, US patent #35,325. H. Redlich’s gave the following instructions for the use of the bottle corker: “DIRECTIONS: SOAK THE CORK, DROP INTO THE OPENING AND TAP THE PLUNGER WITH A MALLET OR HAMMER.” Bottle corker, a hand operated wooden corking device for sealing bottles. Bottle corker has two parts comprising a wooden plunger rod with knob handle, and wooden cylinder containing a metal tube that is flared to a funnel shape on the top. The cylinder has a hole the diameter of the rod at both ends and an oval insertion slot in one side. The tip of the plunger rod is slightly compressed and it has an indented line around the circumference as though it has had something attached to it. Manufactured in the late 1899s to early 1900s in Melbourne.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cork

A mortise axe is a specialist axe designed for hewing sills and notches in joints. The axe has a long, narrow head, making it easier to work on large logs. The shape enables the user to hew a long way down into the notch, where otherwise a chisel would be used. This tool has one blade, which may be pushed, swung or struck with a mallet. Others, have two, one of which is used for separating the fibres, and the other for levering out the waste.This is an example of a common woodworking tool used by the early settlers in the Orbost district.A long wooden handled axe used to cut mortises in posts for post and rail fences. The blade is made of iron and is quite long.axe mortise-axe fencing timber farm-tool