Wooden mallet and handle, with an overall rectangular head that has one curved face and one wedge shaped face. Head set at angle and tilted to one side.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, mallet

Caulking is the use of cork or other substances to seal the seams and joints of the vessel to make them watertight. Caulking lasts for quite some time but eventually dries out and needs to be replaced. A mallet or hammer is often used with a caulking iron to drive it along the seams. The caulking iron’s blade is tapered to be narrower at the tip to make it easier to remove it from the joint. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Caulking mallet; a thick wooden handle with a round ‘T’ cross-bar near the end. Metal reinforcing is added around the ends of the head. Both sides of the wooden head are flared outwards towards the end. The head is reinforced where it intersects with the handle and around the ends of the head just above the tips. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, caulking mallet, caulking iron, laurie dilks, l dilks, port and harbours melbourne

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron narrow pointed jerry iron used to jerry or chip out the old pitch and oakum from corked seams. It was held at 45 degree angle to the seam and hit with malletflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron long heavily off set broad set iron with this iron not having a flared head a hammer was used as the driving force. Used in places where the user could not come at it with malletflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

From the home of the late Mr and Mrs W.J. Sebire, C1890Beaten brass dinner gong with silver trim on two supporting horns at side, mounted on a wooden base. Mallet is silver with hanging ring and leather surround on knob. Has a leather hanging strap.gongs, gong strikers

This gavel (or mallet) and stand was used by the Shire of Strathfieldsaye Mayor or a presiding officer of a meeting to signal for attention or order.Wooden gavel with carved handle and stand. Front of stand has enameled circular badge containing the Shire of Strathfieldsaye coat of arms with words Shire of Strathfieldsaye Victoria 1866.Shire of Strathfieldsaye Victoria 1866.shire of strathfieldsaye, city of greater bendigo administration item

This gavel (or mallet) and stand was gifted from the Provincial Cities and Towns Association of Victoria to mark the centenary of the City of Bendigo.Wooden gavel with carved handle and stand. Front of stand has engraved plaquePresented to / The City of Bendigo / to mark the / Centenary of the Municipality / as a City / By the Provincial Cities and Towns / Association of Victoria / 21st July 1971city of bendigo

Sports Clubs in Kew in the final decades of the 19th century and in the early 20th century were often umbrella organisations with facilities for a number of sports. Typically in Kew, this included teams in lawn bowls, tennis and croquet. The Kew Bowling Club was formed in 1880 while the privately owned Auburn Heights Recreation Club was opened in 1904. The croquet courts at the Kew Recreation Club were opened in 1906, two years after the Club's formation. By 1998, the two Clubs decided to amalgamate at the Auburn Heights site in Barkers Road, forming the Kew Heights Sports Club. The combined club was itself taken over by the Melbourne Cricket Club in 2012 becoming MCC Kew Sports Club. In 2017 MCC Kew closed and its landholding was subsequently sold to Carey Baptist Grammar School. Both the Kew and Auburn Heights Clubs assembled important collections. These historically significant and large collections were donated to the Society in 2020. The collections include manuscripts, pictures, trophies, plans, honour boards etc. References Barnard FGA 1910, 'Sports and Pastimes' in Jubilee History of Kew Victoria: Its origin & progress 1803-1910. Chapman J & C 1999, The history of the Auburn Heights Recreation Club, 1904 to 1908. Reeve S 2012, City of Boroondara: Thematic Environmental History, p.216.The combined collections of the four sporting clubs making up the collection number hundreds of items that are historically significant locally. They are also significant to the sporting history of the greater Melbourne area and to the sports of lawn bowls and tennis in Australia in the 19th and 20th centuries. The collection illuminates two of the Victorian historic themes - 'Building community life' through forming community organisations and 'Shaping cultural and creative life' by participating in sport and recreation.Croquet mallet, Shaft made of a number of separate rectangular sections of pale wood, mostly wrapped with cotton cord and strips of leather. The rectangular head is made of a darker heavier wood and it is banded with a strip of lighter wood.croquet -- mallets, croquet -- equipment, auburn heights croquet club, auburn heights recreation club

Bell was presented to the Melbourne Legacy Club by the departing president E.R.F. Serman in 1929. It was used during Comradeship Committee meetings.E.R.F. Serman was the Melbourne Legacy Club president in 1928-1929. Comradeship Committee meetings were very important to the Legatees.18 Pounder Shell casing that has been polished and had a small brass hook welded to the base. The casing has been split and bears the signs of being hit with a hammer. There is an inscription engraved on the front. The shell is hung from a brass arch which has been mounted to a wooden base. Two small brass hooks on the base act as a mount for the mallet. The brass arch and hooks are attached to the wooden base via flat head screws from the underside. The mallet is constructed of a brass rod with a felt head.Presented to the Melbourne Legacy Club by E.F. SERMAN PRES.1928-9comradeship, committee, legatee event

Caulking iron narrow pointed jerry iron used to jerry or chip out the old pitch and oakum from corked seams. It was held at 45 degree angle to the seam and hit with mallet. Has JN&Co stamped both sides.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Caulking iron (hand made) narrow pointed jerry iron used to jerry or chip out the old pitch and oakum from corked seams. It was held at 45 degree angle to the seam and hit with mallet. 265mm long, 22mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, caulking iron

Bossing Mallet, wooden (Boxwood or lignum vatae) head conical shaped and has three grooves around circumference. End of handle is bulbed, has a groove around circumference and a hole through handle. Used by plumbers for forming lead sheetflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bossing mallet

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingMetal Wedge long and tapered at one end, worn and flattened at top end ( maybe from being struck with a hammer )kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingMetal Wedge long and tapered at one end, worn and flattened at top end ( maybe from being struck with a hammer )kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingAwl and wooden handle with metal ferrule at end, thin metal shaft , slightly bent coming to a sharp point. Spare handle in a light wood with a brass ferrule.kazenwadel, blacksmith, wood, tools camp 3, chisels, mallets

Used in the timber industry for making split palings. The palings are shaped by hand with the bottom edge put onto the timber and a mallet hit onto the top of the blade. This pre-dates sawn palings. Associated with the timber and household building industry in the Orbost region.A rectangular flat iron blade attached to a wooden handle. The cutting edge of the knife is along the bottom (rather than the end as with an axe). The wooden handle appears to be made from a small tree branch.paling-knife splitting-timber

A wooden chest (.1) containing lawn tennis and badminton equipment, specifically: a tennis net (.2); a badminton net (.3); net posts (.4 - .5, 3 parts each); guy ropes (.6 - .7); stick (.8); pegs (.9 - .12); a fold-out stool (.13); and a mallet (.14). Extra, (probably non-original), objects are: guy ropes (.15 - .16); pegs (.17 - .20); mallets (.21 - .22). Black and green lithographic print on inside of lid features the image of a mixed doubles amtch, with inscription: TENNIS. Materials: Wood, Metal, Lacquer, Cord, Ink, Paper, Rope, Cloth, Painttennis

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron blacksmith made boot iron, this iron is used for setting down deck seams where they are crossed by a steam or water pipe over the deck. They were also useful in other awkward places e.g. around winches. Driving force either mallet or hammer.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A joiners mallet constructed with a mortised handle into a metal shell bound around the striking faces. It is used for tapping wooden joints together such as mortise and tenon joints. There is an unidentified symbol on one side of the metal casting. Wooden striking faces are a reddish colour and could be red gum. Symboljoinery, woodworking, timber forestry branding hammer

The mallet was given to the College by the staff of St Mark’s Hospital, London to celebrate the inauguration of the Proctological (later Colonic and Rectal) Section, on 28 May 1963. It was presented by J.C. Stewart to Alan Lendon, then Vice-President and Chairman of the Court of Examiners. Although it is usually described as a gavel, the form of the piece is in fact that of an ancient stonemason’s mallet. The action required to use it is a straight up-and-down motion, unlike that of a normal gavel, which is handled like a hammer. Made of black bean, 22.5cm high and 12cm in diameter, the mallet rests in a wooden stand made of Queensland walnut, with a square base of English oak. The mallet and stand are housed in a travelling case covered in red leather and lined in red velvet and white satin. On the front of the stand are four crests, those of St Mark’s Hospital, the Royal College of Surgeons of England, the Royal Society of Medicine, and the Royal Australasian College of Surgeons. St Mark’s was founded in 1835 as a specialist hospital for the treatment of fistula in ano, a common condition in the days of travelling on horseback, and other anorectal disorders. Over the years the hospital developed into a centre for gastroenterology, colonic and rectal surgery, and many Australians went to further their training there. Some noted Fellows of the College, including Robert Officer, James Guest, Reg Magee, Brian Collopy and Adrian Polglase, and three Presidents, Mervyn Smith, Sir Edward Hughes and Russell Stitz, are alumni of St Mark’s. This mallet is a reminder of the establishment of a significant surgical section within the College, and is a fitting gift from an institution with which so many eminent Australian surgeons formed close ties.GAVEL ON STAND WITH PAINTED COATS-OF-ARMS IN RED LEATHER PRESENTATION BOXPLAQUE ON GAVEL: "PRESENTED BY THE STAFF OF ST. MARK'S HOSPITAL TO COMMEMORATE THE FOUNDING OF THE PATHOLOGICAL SECTION OF THE RACS 28TH MAY 1963"

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

The cutter is placed over finished cloth, inserted block is pressed down to flatten any wrinkles and the needed sample is optain by tapping cutter top with a wooden mallet. The sample is then weighed to ascertain whether the processes have produced the desired result.textile design, collins bros mill pty ltd

An unknown couple are outside the nursing home. A man holds a wooden handle, possibly a croquet mallet, while a female in a blue cardigan smiles as she looks on and holds his elbow. It is unknown where these images were taken, however assumed to be at Elanora.1 colour photograph of man holding wooden stick whilst female smiles and looks onelanora home (brighton), recreation, association for the blind

Pittock leather maker's collection * 15 leather maker's awls (120-150mm long), * four chisels (200-245mm long), * one wooden mallet 285mm long. * three timber straight edge marker and plumb line * one bird ornament Items stored in coach builder's box, reference 13000.1.

Train world poster for use in roof ad rack of Ballarat trams. A3 size poster of a Uganda Railway Steam Locomotive (Mallet) drawn by David Frost and details of "Train World" hobby shop. Poster photocopied and glued onto a cardboard cut from another poster. Image added 20-12-2016.trams, tramways, train world, posters, roof ads

A silver table gong. (1/2) Gong section is a recessed disc of beaten silver; (2/2) Mallet is wood with a felt and foam head. Gong disc is suspended from a silver frame anchored in a wood base. Each pillar of the frame is a representation in silver of a tennis racquet. Materials: Silver/Metal, String, Wood, Felttennis

Plaque on the James Mallet Bennett memorial in O'Donnell Gardens, Built in 1926-7 by H B Corbett & Sons and designed by William H Lacey. Accompanied as engineer Sir Ross and Sir Keith Smith on the first flight from England to Australia 1919. Killed in aeroplane crash at Hendon England, 13th April 1922.colour photograph, unmountedIn Honoured Memory of Liet J.M. Bennett MSM AFM, of the Australian Flying Corps who accompanied as engineer Sir Ross and Sir Keith Smith on the first flight from England to Australia 1919. Killed in aeroplane crach at Hendon, England, 3 April 1922.aviators

Congues and Mowlam families Images of two families who lived in Cruikshank Street from the 1930s to 1950s. .14 - St Joseph's debutants 1947 Left to right from rear (little girls not included) Shirley Payne, Pat Mowlam, ??, Mary Dawson, Carmel Mills, ??, Norma Davis, Pat Ryan, ??, Shirley Mallet, Joan Bath, ??, Lorraine Murphyfamilies, congues family, mowlam family, barbara gardiner nee hegarty, pat frisby nee mowlam, joan bath, lorraine murphy, shirley mallet, pat ryan, mary dawson, shirley payne, norma davis, religion - roman catholic church (st josephs)