The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 216 NQR - Open Medium Truck 15/ 1/1914 NWS Built new VR Service History *NQR 216.VA - 15/ 1/1914 NWS Built new - / /1926 - To NQ 216.VA - Puffing Billy Service History or Notes April 2016 - Trial fitting of brake rigging May 2016 - Riveting of the draw gear castings in progress July 2016 - Riveting of the draw gear castings in progress. Truss rods threaded ready for fitting Aug 2016 - Rivetting of the draw gear castings in progress. Draw gear and couplers being evaluated. Sept 2016 - Riveting of the draw gear castings in progress. Draw gear and couplers being overhauled. Oct 2016 - Riveting of the draw gear castings completed, brake piping installed. Nov 2016 - Floor installed, under framing welding completed, fitting of side doors, hand brake fitted Dec 2016 - Car Workshop - Side panels fitted, end panels to be fitted Jan 2017 - Couplers fitted, brake rodding connected, transferred to Emerald for bogie work and sign writing. Feb 2017 - At Emerald - Tyres machined, braking system being prepared Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck216 NQR - Open Medium Truck made of Steel and metal216 NQRpuffing billy railway, pbr, rolling stock , 216 nqr - open medium truck, victorian railways, nqr - open medium truck

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 23 NQR - Open Medium Truck VR Service History - NQR 23.VA - 10/12/1898 NWS Built new - / /1926 - To NQ 23 Puffing Billy Service History or Notes Untrafficable at Emerald Historic - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck 23 NQR - NQR at Emerald - Open Medium Truck made of Steel and metal23 NQR puffing billy railway, pbr, rolling stock , ? nqr - open medium truck, narrow gauge rolling stock, nqr wagon, 23 nqr, victorian railways

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 203 NQR at Clematis - Open Medium Truck 203 NQR - Open Medium Truck (11) VR Service History - NQR 203.VA - 5/12/1913 NWS Built new - / /1926 - To NQ 203.VA - NQ 203.VA - / /1973 NWS Stored minus bogies, NR4/73 Puffing Billy Service History or Notes Untrafficable at ClematisHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck 203 NQR at Clematis - Open Medium Truck made of Steel and metal203 NQRpuffing billy railway, pbr, rolling stock , ? nqr - open medium truck, victorian railways

Section of Narrow Gauge Railway Track. Two standard spaced section joining holes at one end of the Rail

A collection of Locomotive operation manuals. All are paperback and feature an image of the relevant locomotive on the cover. Relevant illustrations are included in each publication. Cover is of card and they are bound with staples.fictionThe manuals refer to the following locomotives:- Westrail L Class (November 1983) originally built by Clyde Engineering from 1967 for the Western Australian Government Railways (WAGR) for use on the Eastern Goldfields Railway between Perth and Kalgoorlie. In 1983, three were leased to V/Line to haul services on the standard gauge Melbourne to Albury line, sometimes extending through to Sydney.A class (January 1984) were initially used for "Intercity" passenger services within Victoria. In this service, they operated at speeds up towards 125 km/h. Later, they were also used for freight services.N class (September 1985) produced by Clyde Engineering and entered service in 1985 and still operating in 2023. 422 Class diesel-electric locomotives (August 1983), designed by Clyde Engineering were introduced in January 1969. Following crew training, the engines entered service on the Main Southern line between Sydney and Albury and the Illawarra line from Sydney to Port Kembla and Moss Vale. Among the passenger services they hauled were the Southern Aurora and the Spirit of Progress. From 1982, they began to operate through to Melbourne. This ceased in February 1990 when non-air-conditioned locomotives would no longer be accepted by Victorian drivers.railways victoria, diesel-electric locomotives

ill, maps, p.298.non-fictionA listing of the industrial steam locomotives standard & narrow gauge that operated on the industrial railways of the Illawarra district in New South Wales.industrial railroads - australia - history, steam locomotives - nsw – pictorial

ill, maps, p.64.non-fictionA history of the standard gauge railway from Sydney to Perth finished in 1970.transcontinental railway - australia - history, railroad construction - australia - history

ill, maps, p.67.non-fictionA guide to the standard gauge railway from Sydney to Whyalla & Maree for a special passenger train run in 1972 complete with maps of the route.special passenger train - australia, transcontinental railway - australia - history

ill, maps, p.72.non-fictionThe story of the first steam train to cross Australia with the special Western Endeavour train from Sydney to Perth to commemorate the opening of the standard gauge all the way through from 22-08 to 12-09-1970.railroad passenger trains - australia, western endeavour special passenger train - australia

ill, p96.non-fictionA pictorial history of the standard gauge railway from Melbourne to Sydney from 1962 to 1982railroad operations - australia - pictorial, locomotives -- australia -- pictorial works

ill, maps, p.40.non-fictionA promotional brochure from the Western Australian Government Railways in 1970 to mark the introduction of the standard gauge from Sydney all the way to Perth.railroad operations - australia - pictorial, indian pacific passenger train - australia

ill, p.18.non-fictionA brief history of the railway from Perth to Kalgoorlie from 1897 to 1971 and the introduction of the standard gauge railway from Kalgoorlie to Perth.railroads - passenger - western australia, railroad construction - western australia - history

ill, p.10.non-fictionA ceremonial brochure produced to commemorate the opening of the new Forestfield marshalling yard in Perth by the Western Australia's as part of the new standard gauge railway from Kwinana and Fremantle to Port Pirie in South Australia.railroad construction - western australia - history, transcontinental railway - australia - history

ill, maps, p.24.non-fictionA ceremonial brochure produced to mark the inauguration of the first flow of traffic on the new Western Australian standard gauge railway from Kwinana and Fremantle to Kalgoorlie to meet the existing Trans Australian Railway to Port Pirie in South Australia.railroad construction - western australia - history, transcontinental railway - australia - history

ill, maps, p.48non-fictionA history of the broad gauge railway to Port Pirie in South Australia to meet the Commonwealth Railways standard gauge and 3'6" narrow gauge S.A.R. line.railroad construction - south australia - history, railroad operations - south australia - history

ill, maps, p.16.non-fictionBooklet to commemorate the opening of the standard gauge railway from Port Augusta to Whyalla on Friday 6th October 1972railroad construction - south australia - history, commonwealth railways (australia) -- history.

ill, p.19.non-fictionBooklet to commemorate the opening of the standard gauge railway from Stirling North to Marree in South Australia on the 27th July 1957.railroad construction - south australia - history, commonwealth railways (australia) -- history.

ill, maps, p.38.non-fictionA tour program... possibly run by the ARHS SA division... for the farewell narrow gauge 3'6" S.A.R. from Port Pirie South Australia to Cockburn, before the start of standard gauge operations begin. Friday 10th to Monday 13th October 1969.railroad operations - south australia - history, preserved locomotives - south australia - history

ill. p.258.non-fictionRails Across Australia is an album of photographs taken by David Cable, a well-regarded British author of several albums of train pictures throughout the world. The photos were taken initially during the period between 1967 and 1973 when David lived in Adelaide, and then during several visits around the Commonwealth during the twenty-first century. The photos cover a wide variety of trains in the mainland states, from Queensland to the Pilbara region of Western Australia, and include pictures showing trains in the landscapes, as well as close-up photos of locomotives for the modelling enthusiasts. The well-known problems of different gauges originally established in the various states are illustrated by the individual classes designed for them, in addition to the newest designs for the standard gauge tracks now linking them.railroad trains -- australia -- history -- pictorial works., railroad trains -- australia -- history.

index, ill, maps, p.248.non-fiction"Ron Fitch was born in 1910 into a railway family. He began his career as a 16-year-old engineering cadet and completed it, 46 years later, having worked at various times for two state railways and the Commonwealth, as Commissioner of South Australian Railways. In this book Fitch gives a vivid account not only of his career but of the camaraderie of the greater railway community, often experienced in the most trying of conditions. Fitch gives an account of laying track and the remarkable breed of men who do so, of advances in line-building techniques, of derailments and floods and washaways, of wrangles over attempts to implement standard gauge, of the politics of railways. In 2002 when 92 Fitch earned recognition from the Guinness Book of World Records when his thesis on South Australian railways made him the World's oldest recipient of a PhD."--Jacket.fitch, r. j. (ronald john), 1910-, railroad engineers -- australia -- .biography

ill, maps, p.30.non-fictionA promotional booklet for the completion of the standard gauge railway into Perth Western Australia.railroad trains -- australia -- history., railway construction - western australia

ill, p.68.non-fictionA history of steam & diesel locomotives on the Commonwealth Railways narrow gauge and standard gauge.locomotives - south australia - history, locomotives - commonwealth railways - history

ill, p.32.non-fictionA history of preserved locomotives in South Australia on broad gauge, standard or narrow gauge.preserved locomotives - australia - history, preserved locomotives - south australia - history

ill, p.24.non-fictionA brief history of narrow gauge 3'6" & standard gauge diesel locomotives built of the Western Australian Government Railways (Westrail).railroad locomotives - western australia - history, diesel locomotives - western australia - history

Kids of all ages enjoy the Miniature Railway. Published: Nillumbik Now and Then /​ Marguerite Marshall 2008; photographs Alan King with Marguerite Marshall.; p163 On Sundays in Eltham thousands of children, mums, dads and grandparents can be seen travelling around Lower Eltham Park in tiny trains. They are among the two and half million passengers who have travelled on the Diamond Valley Railway since it officially began in 1961. The miniature railway originally operated from the 1940s at Chelsworth Park, Ivanhoe, until flooding caused it to be moved to the Eltham Lower Park in 1959. The railway is modelled on the 1920s era – the heyday of passenger rail travel – and the trains are built on a scale of two inches to the foot (1/6). Although not exact replicas, trains include models of the Spirit of Progress, Puffing Billy, The Overland, Dog Boxes, Vic Rail S class, G class and a NSW 81 Class. The three and a half kilometres of track is set amongst native plants and picnic areas. A friendly hoot or the clang of a bell occasionally punctuates the tranquillity as a train emerges from a treed bend with passengers excitedly waving to onlookers. For $3 the train takes you on a 13-minute two-kilometre ride. Passengers sit in single file in the narrow train, which clatters along tracks built to the scale of the Australian narrow gauge of three feet six inches (1.1m). These are used in Queensland, South Australia, Tasmania and Western Australia. Safety standards are stringently kept. Even before you buy a ticket notices tell you that you must wear closed shoes. You can even borrow these, and you are given a pair of socks for the ride! Blue-overalled volunteers check tickets, see you aboard, and drive the train. They are mainly retired men who can at last devote their time to what little boys dream of – playing with trains. Passengers are instructed in safe behaviour, then the station master waves a white flag and off we go. The guard sits at the back with his whistle and green flag at the ready. The winding track, fringed by native trees and bushes planted by volunteers, stands on crown land managed by Nillumbik Council. The train clatters along the track and crosses a bridge over a drain elevated by name to The Blow Fly Creek. We pass by Meadmore Junction at a speed of three kilometres an hour. Then on through a tunnel, accompanied by squeals of delight, and after a few moments of blackness, light glimmers at the end. On we go, past the original platform, along another route past busy Main Road through Pine Creek Station, over a bridge and through another tunnel with more screams of delight.Then a signal stops us before the ‘all clear’ to return to our original point of departure. The railway services its passengers – the largest number of any miniature railway in Australia – with a fleet including: six diesel locomotives, three steam locomotives, eight sets of passenger cars and one battery electric Dog Box set. Members also privately own 20 locomotives and powered carriage sets as well as four carriage sets.1 All the trains are stored on-site in workshops, sheds and a tunnel. The railway is entirely run by volunteers, so that all ticket money is used for maintenance and extensions, and some goes to local charities. Since 1991, the entire railway has been rebuilt, including an upgraded signalling system. About half of the 120 volunteer members are active with about 35 working each Sunday, and a dozen or so working every Wednesday. Members are trained to positions of station assistant, booking officer, train guard, train driver or signalman. Members construct new carriages and locomotives as well as maintaining track, signalling and rolling stock.This collection of almost 130 photos about places and people within the Shire of Nillumbik, an urban and rural municipality in Melbourne's north, contributes to an understanding of the history of the Shire. Published in 2008 immediately prior to the Black Saturday bushfires of February 7, 2009, it documents sites that were impacted, and in some cases destroyed by the fires. It includes photographs taken especially for the publication, creating a unique time capsule representing the Shire in the early 21st century. It remains the most recent comprehenesive publication devoted to the Shire's history connecting local residents to the past. nillumbik now and then (marshall-king) collection, diamond valley railway, eltham lower park

ill, maps, p.16.A commemorative booklet to mark the start of the building of the standard gauge railway from Tarcoola to Alice Springs on 12th April 1975.railway construction - australia, trans-australian railway - history

ill, maps, p.16.A commemorative booklet to mark the start of the building of the standard gauge railway from Stirling North to Maree on 27th July 1957.railway construction - australia, north australia railway - australia - history

A small booklet of 14 pages including articles and images.This booklet is one of a series featuring news items from Victorian Railways from the early 1960s until the late 1980s. During this period the corporate name changed to VLine and the newsletter continued to be published as VLine Newsletter. This issue from April 1961 features an article "Wodonga Links the States" which explains the complexity of operations of the railways at Wodonga and Albury due to the break of gauge in gauge between the two railway networks. The article was written to acknowledge the work carried out by the railway at both stations prior to the opening of the standard gauge track. Until this time Victorian trains operated on 4’ 8½” tracks whilst New South Wales were 5’ 3” wide. With an overall stall of 241, Wodonga railmen prepared, serviced and manned 14 "up" and 11 "down" trains as well as specials each day. Special migrant trains to Bonegilla were often a feature at this time as well as transport of heavy equipment to the Snowy Mountain Scheme.wodonga railways, victorian railways, victorian railways wodonga