Memorandum hand written on preprinted ruled paper with rounded corners dated Friday 11/5/1962, titled "Tramway Traffic" detailing the Revenue and wages along with passenger counts for weekdays, Saturdays, Sundays after 8pm and Sundays after 9pm. Not detailed whether a date or an average over the summer loading. Wages for the crews only.,trams, tramways, closure, fares, wages, revenue, passengers

Circa 1974 Location Unknown - Group Photo From Left to Right: Unknown, Joe Lukesiswiz, Ron Boucher (Works Foreman), Harold Ennor (Assist. Foreman), Hugh Ward (District Manager), Graham Sheckelton (Works Chemist, John Rooney (Leading Hand Stoker), John Varker, Driver Front end Loader and Truck.person, group, business

Technical Bulletin from A. K. Lever & Co. Pty. Ltd., manufacturers of 'Nulon' Nylon Bearings & Bushes. Headings include: General Characteristics, Co-efficients of friction for Nylon on steel, Chemical Resistance, Water Absorption, Condition of material, General, Lubrication, Load and Speed, Heat Conductivity - Wall thickness, Thermal Expansion, Fitting and Wear - Running in,sciences, bill ashman collection - correspondence, a k lever & co pty ltd, nulon nylon bearings & bushes technical bulletin, mcpherson's limited

Two men place large paper packages on to a pallet, with another pallet load of packages to the right of the image. In the background, four workers sit - two of them working on making the paper packages.1 B/W photographroyal victorian institute for the blind

The Germans bought some guns during World War I, but used them as infantry guns in direct support of the infantry where their light weight would allow them to move with the infantry. They complained that the guns were too fragile and didn't have a high enough muzzle velocity to act as an anti-tank gun. Considering that the guns were designed to be disassembled it's not too surprising that they couldn't stand the abuse moving through the shell-pocketed front lines on the Western Front.This particular Gun was captured by Australian Soldiers at the Battle of ST Martins Wood near Ypres in the 3rd Battle for the Somme. The German crew were all killed as were a number of AustraliansThe Skoda 7.5 cm Gebirgskanone M. 15 was a mountain gun used by Austria-Hungary in World War I. In German service it was known as the 7.5 cm GebK 15. Its development was quite prolonged as the Austrians couldn't decide on the specifications that they wanted. Initially they wanted a gun that could be broken-down into no more than 5 pack-animal loads to replace the various 7 cm mountain guns in service, but prolonged trials proved that the 7.5 cm M. 12 prototype to be the best gun. The guns were delivered beginning in April 1915 instead of the planned date of April 1914. For transport, the gun could be dismantled into 6 parts, generally carried in 4 loads. In addition, there was a gun shield fitted on some (perhaps many) such guns. ypres st martins wood skoda gun

2107 ton iron clad monitor vessel with 4'10" loading muzzle. Built in Newcastle, UK in 1868. and arrived in Melbourne in 1870 Harbour service from 1906. Scuttled at Sandringham September 1921Visited Port Fairy 18th April 1871Black & white photograph of HMVS Cerberus and other naval vessels ship, coastal steamer

Historical Details: The Bristol Freighter was the first post war heavy freight aircraft to enter service in Australia. It featured large clam shell doors at the front of a large "container" like fuselage allowing complete cars and other large loads to be carried. In 1966 th. Description: The Bristol Freighter was the first post war heavy freight aircraft to enter service in Australia. It featured large clam shell doors at the front of a large "container" like fuselage allowing complete cars and other large loads to be carried. Designe. Level of Importance: Nationalfreighter, bristol

This handmade barrel sling is used for hoisting barrels onto ships. It is made from hemp fibre and is part of the equipment carried on 19th and early 20th century vessels for loading and unloading barrels and casks at the docks.This barrel sling is significant as equipment typically carried on board sailing ships for use in port when loading and unloading cargo.Barrel sling, handmade from hemp fibre.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, barrel sling, cask, dock, loading cargo, ship equipment, sailmaker, ropework

Train Sand Bucket The Train Sand Bucket was usually carried in the guards van of a train and was used to sand the rails when required to provide traction for the locomotive to haul its load up steep grades.Historic - Railways - Train Sand BucketTrain Sand Bucket made of metal puffing billy, train sand bucket

On 8 March 1962, after the line from Crowes to Weeaproinah was shut down. Beginning at Crowes, groups of gangers started removing the tracks, loading them into NQR open wagons pushed by locomotive G42.B/W. Four empty NQR open wagons with a group of gangers tearing up the lines.crowes; beech forest; weeaproinah; railways;

Provides a detailed listing of Melbourne's tram in 1965 and details of their numbers, No in service, type, capacity - seated and crush load, trucks, wheel and truck centres, tare weight, controllers, compressors and length over bumpers.Yields information about the Melbourne tram fleet in 1965.Drawing or document - A4 sheet, photocopied from a Foolscap sheet, titled "Rolling Stock Data Tramcars" dated 11/5/1965tramways, tramcars, mmtb, melbourne, data sheet, w class

Circular artillery prime charge powder bag made of canvas material. Set of five in a string bag. This item is two sets of five. These are made in a hexagonal shape with one side unstitched. The bag was filled with the chosen powder type and charge in the field prior to loading the artillery piece. Believed to be of Turkish origin and presumably of World War 1 origin.

Newspaper clipping, Bendigo Advertiser Tuesday June 24 1947. Photo shows a load of 'Barblock' wire being unloaded in Bendigo for distribution by the Abbott Supply Company. Advice has also been received 'Barblock' has been adopted as standard wire for the Australian Military forces and the British Imperial Forces, and efforts are being made to produce it in England.rural industry, fencing, barbed wire, h. a abbott

Railways Collection - colour photo (part of a series ) of an Unspecified number of Multi wheel Super Heavy Transport Vehicles-all of which appear to be transporting Railway related items. The front vehicle appears to be carrying a partly scrapped Locomotive Diesel engine there is a sign on the front vehicle - 'Danger Long wide Load' and a boy is standing on the step to the Passenger door.photograph, train, diesel

Gredgwin Weighbridge docket duplicate with a decorated perforated centre. Date line ends 193-. Both dockets are identical. Printed on the dockets are Gredgwin Weighbridge, date line 193-.. Owner's Name, Buyer, Carter's Name, Table with Weight in Tons Cwts, Qrs. Lbs, Description of Loading, Description of Vehicle, Gross, Tare, Net and underneath Charges and Weigher.business, printers, cambridge press, cambridge press collection, gredgwin weighbridge

Bendigo advertiser "The way we were" from Wednesday, February 2, 2005. A growing concern: eucalyptus was a big industry in Bendigo in the late 1940s early 1950s. This picture of eucy cutter Jimmy Fairborn, in front, and truck owner Eric Finch, with a load of eucalyptus on its way to the distillery, was taken in Union Street, West Bendigo.. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Yields information about the use of trams for school tours prior to closure of the Ballarat system.Digital image of trams 37, 41 and 40 loading school children at the Lydiard St North on a tour prior to the closure of the tramway. Photo by John Ward 18 August 1971. Slide title "04678 180871 7169-G SECV bogie trams 37, 41 & 40 with school children terminus Lydiard St North Ballarat Vic"trams, tramways, schools, tours, special trams, lydiard st north, tram 37, tram 41, tram 40

Yields information about the dispersal of tramcars after the closure of the Ballarat system, in particular the scrubber tram to the TMSV.Newspaper clipping from The Courier, Ballarat, 22/9/1971 with a photo and caption of the Ballarat Scrubber tram loaded on a truck prior to being transported to Bylands for the TMSV. Photo shows a worker with a long pole to prop up the overhead so the truck with load could clear the depot area. See Reg Item 3776 for a print of the Courier photograph.scrubber tram, tmsv, transport

Yields information about the disposal of tramcars from the SEC Ballarat system to the TMSV following closure.Colour print of Ballarat tramcar 17, being prepared for loading at the SEC Ballarat depot with poles supporting the overhead and a person (Mr Ward?) standing on the roof of the tramcar. Photo taken 20/9/1971. Item was placed in an envelope marked "Mr. G Ward" - retained with photograph in storage folder. Photo printed on Kodak Paper. Photograph by Lilian Butler?in ink on rear "Tram Depot - Wendouree Parade, Ballarat Monday 20th September 1971. With my compliments Lilian Butlertrams, tramways, tmsv, tram disposal, sec, depot, loading trams, tram 17

The horse collar would have been used on draught horses to pull a wagon or plough on farms.A large vintage leather horse collar with leather straps and buckles at the bottom. It is padded possibly with straw and lined with felt, fur or animal hair. It was part of the horse harness used to distribute the load around the horse's neck and shoulders when pulling a plough or wagon. It often supports and pads a pair of curved wooden or metal hames to which the traces of the harness are attached.horse accessories, horses, agriculture, harnesses, horse tack

Thirteen page report within Manila covers with a red comb binder, foolscap size titled "Loading / Unloading characteristics Z-class trams, Interim Report", dated July 1975, summarising the findings of experiments at Preston Workshops and studies during June and July 1975. Gives a view on the design of the Z-class design. Includes tables and graphs.Marked on top of the front over "Embargoed" and "74/1.5 (part 5 of 5)trams, tramways, mmtb, z class, preston workshops, reports

Two buff coloured documents. On top of page: Fortnightly Statement, Sheepshead Shaft, Fortnight ending Nov. 7 and 24/10/17. Columns filled in include: mine or tributor, mill share delivered, loads and gold (if ascertained), footage, number of rock drill shifts and fuel used. Statement is part of the Margaret Roberts Collection of mining documents.bendigo, margaret roberts, , goldmining, sheepshead shaft, garden gully mill, wood burnt, fuel, rock drill shifts

This is the paired before paired photograph used in the 150 year Lakes Entrance 1858-2008 display.|The after paired photograph number is 01464.1|Also one 12 x 16 framed photograph used in room display.Black and white photograph of the foreshore, showing a small steamer moored at a rough timber jetty, known as 'the Landing' (later Barrier Landing). Three small rowing boats moored to jetty loading fish to steamer identified as ss Bogong. Five men on jetty. Sandy shore strewn with dead seaweed, coastal banksia on bank. Lakes Entrance Victoriajetties, waterfront, boats and boating, vegetation, room display

This original tunic or jacket is part of the full dress uniform of the pre-Federation Victorian Permanent Artillery regiment. Its owner had the rank of Sergeant, as indicated by the three inverted chevrons. The Artillery design of the badges and buttons indicate the date of the tunic to be from 1893 to 1903. However the maker of the tunic, W. Moncton, began manufacture in Melbourne in 1899, so this the tunic can be dated between 1899 and 1903. The donor's grandfather was given this tunic but not the name of the original owner. It has since been suggested to the family that the tunic was worn by a local Western District Light Horse member. This could very well have been the case because mounted troops were officially referred to as the Light Horse in the late 19th to early 20th century. Several local men were involved in the Light Horse during the First World War. The donor's grandfather wore this tunic in the local district when riding a penny farthing bicycle. The donor's father also wore the tunic when dressed as a 'Captain' hosting a local disco dance. BRIEF MILITARY HISTORY- The Crimean War began In 1854 and many people in colonial Australia were afraid of a Russian attack. Volunteer forces were established to strengthen the British Imperial troops posted here. A battery of artillery was raised in Victoria as well as in other Australian states. In 1870 Australia became responsible for its own naval and military defence. The Volunteer Corps and Victorian Navy shared the responsibility of defending the existing forts, assisted by volunteer coastal and mobile field batteries. The Permanent Victorian Artillery force was established. It was disbanded in 1880 then re-formed in 1882 as the Victorian Garrison Artillery Corps. In 1895 the Geelong, Warrnambool, Port Fairy and Portland Batteries became part of the Western District Garrison Artillery. Many of the volunteers who served in the Artillery were from rural areas. They belonged to rifle clubs and were experience horsemen as well. Australia's defence at this time relied on these mounted troops, or Light Horse men. In 1899 the Victorian Garrison Artillery Corps amalgamated with the New South Wales and Queensland Permanent Artillery to become the Victorian Regiment of the Royal Australian Artillery (RAA). Then prior to Federation, the RAA and the Permanent Artillery of South Australia, Western Australia and Tasmania all combined, becoming the Royal Australian Artillery Regiment with two Batteries of Field Artillery; Battery A from Sydney and Battery B from Melbourne.This original uniform tunic of the pre-Federation Victorian Permanent Artillery is significant for its association with Australia's military defence and the fortifications of our district, state and country. The tunic is also significant, representing part of the history and evolution of uniforms in the Australian military forces. The tunic is also significant in its representation of Australia's independence in forming its own defences. The tunic has local significance in its connection with local social events.Tunic or jacket, part of the full dress uniform of the pre-Federation Victorian Permanent Artillery operating from 1893 to 1903. Original, single-breasted tunic of dark blue wool, red piping trim, black cotton lining in body. Sleeves lined with blue striped, white cotton. Front closure has eight brass buttons. Red band-style collar with hook-and-eye closure has gold bullion braid trim and a brass badge pinned each side at the front. Upper right sleeve has three inverted chevrons on red fabric with gold bullion braid trim (rank of Sergeant). Both sleeves have gold bullion braid 'Austrian knot' emblems stitched onto lower arm, with ends finishing on the inner sleeve. Shoulder epaulettes have red piping and smaller brass buttons. Closed back vent has vertical scalloped design with six brass buttons, in two columns of three, and red piping trim. Brass belt hook is attached to the left back waist, close to the seam (right side has a mark indicating a previous similar clip). Inside left breast is a concealed pocket. Tunic has both machine and hand stitching. All brass shank-style buttons have matching Artillery emblems with inscriptions on the back. The two brass collar badges have additional artillery emblems of exploding grenade and star as well as an inscription. Buttons were made for W. Moncton, of Melbourne and marked with his name. He traded from 1899, dating the tunic to between 1899 and 1903.Button front: Artillery emblem on front (field cannon facing left, in front of a muzzle-loading ram rod). Button back: engraved "W. MONCTON . MELBOURNE ." Collar badges: Artillery emblem (field cannon facing right | stars | exploding grenade | "AUSTRALIA")flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, uniform jacket, uniform tunic, garrison volunteer uniform, fortifications in victoria, victorian permanent artillery, pre-federation military uniform, sergeant's uniform, jacket, militia, victoria, victorian volunteer forces, victorian regiment, royal australian artillery, raa, field gun, sergeant, w. moncton, garrison, dress uniform, tunic, scarlet collar, red collar, scarlet piping, red piping, gold bullion, artillery emblem, light horse, artillery, mounted troops, victorian garrison artillery corps

The dray was pulled by a horse and used to transport road building materials such as gravel. The tray carried 0.7 of a cubic metre which would have weighed about 1 tonne (varying on the load being wet or dry).This tipping dray was owned by John Briggs who carried gravel on the Tawonga to German Creek Road from 1894 to 1895. Workers were paid 2/- (shillings) per day to cover sections that were called 'a paddock' resulting in workers finishing at 10 or 11 pm. The road opened on the 17th March 1896 at a cost of 1700 pounds. See KVHS 0960 for newspaper article re Tom Briggs and making (and photo) of the Tawonga Gap road.Old single axil wooden dray with wooden spoke wheels and a tipping wooden tray.tipping dray. john briggs. tawonga. german creek. road building. transport.