Showing 728 items
matching metal work
-
Vision Australia
Award - Object, Takeo Iwahashi prize plaque, 1988
Plaque commemorating the awarding of the Takeo Iwahashi Prize to Hugh Jeffrey in 1988. Takeo Iwahashi was the founder of the Nippon Lighhouse for the Blind in Japan. He made an enormous contribution to the lives and progress of blind people around the world, and was a great friend of Helen Keller. The annual Takeo Iwahashi Award was founded in his memory and is awarded to a "worker for the blind whose contribution to work for the blind in the fields of education, training, rehabilitation, placement, prevention and cure of blindness, administration of services for the welfare of the blind or any other program related to the welfare of the blind has been outstanding." The plaque features two roughly rectangular wooden veneer boards, one smaller layered on top of the larger, with the top edges aligning. On the smaller top layer is a round metal disc featuring a raised relief portrait of Takeo Iwahashi. Printed above in gold lettering is the following: The 13th Annual Takeo Iwahashi Prize Mr Harold Hugh Jeffrey" Below the disc is printed "March 16 1988. Nomination Committee Takeo Iwahashi Award. Nippon Lighthouse, Welfare Center for the Blind." On the back of the plaque is a metal plate with a Braille transcription of the text.1 wooden block with metal plaqueThe 13th Annual Takeo Iwahashi Prize Mr Harold Hugh Jeffrey March 16 1988. Nomination Committee Takeo Iwahashi Award. Nippon Lighthouse, Welfare Center for the Blind.hugh jeffrey, awards -
Federation University Art Collection
Ceramic, 'Whitebait I' by Alan Peascod, 1989
Alan PEASCOD (1943-2007). Born England. Arrived Australia 1952. Alan Peascod was one of Australia’s most highly acclaimed ceramic artists. For over 35 years his work has been at the forefront of the Australian ceramics movement, developing radical techniques previously unexplored with his developments in unusual glazes and firing methods. His creative repertoire includes dry glazed vessels, alkaline glazes, majolica, saturated metals, and many post firing finishes. Alan's work with the very difficult reduced lustre technique is highly regarded. He was taught the method by Professor Said El Sadr in Cairo, Egypt in 1972 and this led to lifelong research of the technique throughout the Middle East and Europe. His work in the field led to the completion of his doctoral studies at the University of Wollongong in 1994. This study also led to satirical figurative sculpture themes dealing with the human condition. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Lustre glazed earthenware form with sgraffito decoration.art, artwork, ceramics, alan peascod, available, available ceramics, lustre glaze, university of woolongong -
Federation University Art Collection
Sculpture - Metal, 'Chysalid'
It is thought that is work of a student of Sculpture, but the identity of the artist is unknown. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007. If you can assist with information on this artist or artwork please use the comment link below. art, artwork, alumni, sculpture, available -
Federation University Art Collection
Sculpture - Sculpture - metal, Collier, Betty, [Kangaroo] by Betty Collier
Betty Collier (nee Thege) was a student of the Ballarat Technical Art School, and lectured in Sculpture at the University of Ballarat, both predecessor institutions of Federation University Australia. This work was requested for the collection by Brian McLennan. This item is part of the Federation University Art Collection. The Art Collection features over @000 works and was listed as a 'Ballarat Treasure' in 2007.A large oxy welded sheet steel reclining kangaroo.art, artwork, betty collier, collier, kangaroo, sculpture -
Federation University Art Collection
Etched metal, Henry Moritz, [Jack Barker's Farewell] by Henry Moritz
Historical Information Henry MORITZ (1931- ) Born Mainz, Germany Arrived Australia c1952 Henry Moritz was an experienced commercial artist when he left Germany for Australia. After working as a railwayman, coal miner, fruit picker and steelworker, he started teaching commercial art at the Ballarat School of Mines Technical Art School in 1963. He moved to the Mount Helen Tertiary Division, and was head of the Art School at the Ballarat College of Advanced Education (BCAE) when he produced this work. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007.art, artwork, henry moritz, jack barker -
Federation University Art Collection
Sculpture - Artwork -Sculpture, Representation of Das From A Temple in Area, c2000
Clive MURRAY-WHITE (20 February 1946 - ) Born Walton-on-Thames, Surrey, England Arrived Australia 1959 With an impressive career that has included sculpting marble for over 25 years Clive Murray-White has informed his at practice by studying at Brisbane Central Technical College, Guildford School of Art, United Kingdom, Royal Melbourne Institute of Technology and Preston Institute of Technology, Monash University. His early work used welded and cast metal objects. In the 1980s he transitioned to marble sculpture Clive Murray White was Head of Sculpture at the Monash University Churchill (now Federation University Gippsland). He established the Cowwarr Art Space with Carolyn Crossley. Sculpture of a head carved from Cooper's Creek Black Limestone. artwork, artist, sculpture, gippsland campus -
Vision Australia
Photograph - Image, Top Opp recognition plaque
Part of the AFB network of fundraising involved the use of opportunity shops in various locations. The Top Opp was a large contributor and the work of those who volunteered is acknowledged in this plaque.Gold coloured metal plate with black writingAssociation for the Blind gratefully recognises the financial contribution made by the Top Opp at the Chadstone Shopping Centre through the efforts of its many volunteers August 1995association for the blind, fundraising -
Vision Australia
Functional object - Object, Algex, Silver Braille pocket watch
This timepiece uses Braille to indicate the position of the numbers, which the wearer could then use to orient themselves and tell the time from the metal hands. The 12 position is indicated by three dots, with the 3,6,9 positions by two dots. The user would start with a finger at the centre of the face and work outwards to the end of each hand to determine position and hence be able to figure out the time. Since the watch is designed and made for touching, the metal hands are particularly robust.Silver pocket watch with Braille to indicate number position. Clock face = "Algex in Cabloc 17 jewels Swiss made" On back watch sticker "Ali".assistive devices, braille -
Vision Australia
Plaque - Object, Guiding Light plate, 1964?
The plaque believed to have been attached to the Guiding Light structure, which was installed at AFB's Brighton office due to the efforts of President Bruce Small. Although removed some years ago, the structure was a symbol used by the Association for the Blind as a visual way to represent it's work within the community. 1 metal plate with engraving "This Guiding Light symbol of the Association for the Blind was donated by Bruce Small, Esq. Member of Committee 1944-1954. President 1954-1964. Honorary Counsellor 1964-"association for the blind, fundraising, nameplates -
Vision Australia
Container - Object, Donation tin - round RVIB circa 1980's, 1980s
Coin collections have a long and varied history. Coins were often collected in churches in a box located near the entrance/exit, and later via a collection plate that was passed amongst the congregation Funds were used to repair the church or feed the poorest of the parish. The donation of coins is and was considered part of religious life and mentioned in Christian, Jewish and Islamic texts. With the need and expansion of charitable works occurring outside religious life, charity boxes began to spread into hospitals, orphanages and asylums. The need for non-fixed boxes grew with the rise in charities and their activities outside a fixed building. Collection boxes could be large (and therefore hard to move) or could be held by individuals acting as collection agents, working at a specific location, moving between dwellings or at events. In this example, the RVIB tin could be used gathering coins at events such as Carols by Candlelight, White Cane day or other special marketing days.1 metal coin collection tin with handle and paper wrapYour Donation Supports the Work of The Royal Victorian Institute for the Blind RVIB lighthouse logo 557 St Kilda Road, Melbourne, Telephone 9529 3544royal victorian institute for the blind, equipment -
Vision Australia
Plaque - Object, John Wicking Wing, 1996
Constructed in 1996, the new wing at Elanora Nursing Home was named after John Wicking, President of the Association for the Blind for over 10 years, and a strong supporter of the Association and it's work.1 round metal plate with raised inscriptionThis plaque commemorates the turning of the first sod in the construction of the John Wicking Wing, 21st October 1996. This building recognises the outstanding contribution by J O Wicking AM President of the Association for the Blind 1972-1984 and long time friend of blind and vision impaired people throughout Victoria.association for the blind, john wicking, elanora home (brighton), nameplates -
Vision Australia
Photograph - Image, Tilly Aston - H.M. Lightfoot Centre, 1991
Tilly Aston was a writer, educator and social reformist for blind and visually impaired people. Her desire to overcome the limitations in her own life, and that of others, led to the establishment of the Victorian Braille Writers Association (later the Braille Library of Victoria) and the Association for the Advancement of the Blind (later Association for the Blind). When the Kooyong site of the AFB required redevelopment due to the success of activities at Paterson Hall, a new building was constructed and named the H.M. Lightfoot Centre. As part of their contribution to acknowledging the work of Miss Aston, as well as two of the men who later worked with her, this plaque was struck and presented by the Blind Members' Council of the AFB.Brown metal plaque with gold writing"All noble things we do and dare, Must be fruitful, sometime, somewhere" Tilly Aston 11.12.1873 to 1.11.1947 Founder of The Association for the Blind Ltd. A gift to the H.M. Lightfoot Centre from The Blind Members' Council November 1991association for the blind, tilly aston, h.m. lightfoot -
Vision Australia
Photograph (item) - Image, Ballarat Home for the Aged Blind
Kelaston (Ballarat Day Centre) was formerly known as the Ballarat Home for the Aged Blind. This plaque recognises work that was done by the home during the Governor's visit in 1964.From Shire of Ballarat to The Ballarat Home for the Aged Blind In recognition of services rendered during The visit by the Governor on 17th July 1964kelaston, plaques -
Federation University Art Collection
Sculpture, 'Hygea' by Clive Murray-White, 2008
Clive MURRAY-WHITE (20 February 1946 - ) Born Walton-on-Thames, Surrey, England Arrived Australia 1959 With an impressive career that has included sculpting marble for over 25 years Clive Murray-White has informed his at practice by studying at Brisbane Central Technical College, Guildford School of Art, United Kingdom, Royal Melbourne Institute of Technology and Preston Institute of Technology, Monash University. His early work used welded and cast metal objects. In the 1980s he transitioned to marble sculpture Clive Murray White was Head of Sculpture at the Monash University Churchill (now Federation University Gippsland). He established the Cowwarr Art Space with Carolyn Crossley.Marble sculpture of Hygia, the Greek goddess of health and healing. Daughter of Asciepius the God of Medicine, Hygeia symbolises the preservation of good heallth and prevention of illness. Presented to the Gippsland Medical School from the Campus. churchill, gippslands campus, clive murray white, sculpture, clive murray-white -
Federation University Art Collection
Artwork, other - Artwork, 'Ghosts in the Himalayas (Shot Up)' by Lisa Anderson, 2016
Dr Lisa ANDERSON (1958- ) Dr Anderson’s research questions environmental issues that impact on the social structures of communities and their mapped or metaphysical borders. She develops projects around ways of understanding the effects of climate change. These include work with folklore, legends and religions that tell stories of coping with weather, forced migration of animals and people and coping with difference. She has undertaken international residency programs and exhibitions in the Arctic, Iceland, Paris, Norway, London and China, and she was the first Artist in Residence at the Australian Museum. These unique opportunities continue an extensive art practice of installation work, video, photography and sculpture. Anderson has an extensive record of exhibitions in Australia and overseas with work included in both private and corporate collections. Her exhibitions include Journeys: Due North, a large installation work that includes work created over a 10-year period of engagement in expedition and science work North of the Arctic Circle. Beneath the Beauty of Architecture, an exhibition at her London Gallery, Bicha, used images created in China, Nunuvut Territory in Canada and the Antarctic while working with the migration stories of survival. Dr Anderson has created many large scale artworks that challenge notions of occupation of the City, including Writing the City, a three-year program of installation works to shift the use of Sydney to being a city of public space in its pre-Olympic development. Singing up Stones celebrated the people who created and use the Opera House and the Quay for performance and ideas. This included the first image projection onto the Sydney Opera House, a projection onto the Sydney Harbour Bridge and a ballet of cruise liners with the sound simulcast on the local radio station. Two digital prints with acrylic on metal and bullet holes. This work is the result of research on the hidden voice of landscape undertaken by Dr Lisa Anderson while an Honorary Professor at Federation University Australia. lisa anderson, available -
Friends of Ballarat Botanical Gardens History Group
Work on paper - Address Delivered by Mr A.E.C.Kerr, President, Adam Lindsay Gordon Memorial Cottage Committee, 3/4/1938, To honour the Late President Mr Fred J. Martell. Photograph attached of metal plaque at Craig's Hotel entitled "Royal Hotel Stables", 3/4/1938. Photograph-date unknown
The Address in honour of the memory of the Late Fred J. Martell given 3/4/1938, President of the Adam Lindsay Gordon Memorial Cottage was delivered by Mr A.E.C.Kerr, President of the Adam Lindsay Gordon Memorial Cottage Committee, Ballarat. The photograph of Craig's Hotel Stables' sign is included as Adam Lindsay Gordon held the leasehold of these livery stables in 1867.Mr Martell made valuable contributions to the Ballarat community as one of the Founders of the Ballarat Art Gallery, Registrar of the School of Mines and was "really [the] founder" of the Lindsay Gordon Memorial Cottage. His ashes were scattered around the Cottage.8 pages with 3 illustrations and 2 title pages. The 3 black and white illustrations are of Fred J. Martell, the Adam Lindsay Gordon Memorial Cottage and Adam Lindsay Gordon. The photograph of Craig's Stables is high gloss in colour. Nonejohn garner, doctor, john garner collection, ballarat botanic gardens, friends of ballarat botanical gardens, fred j. martell, mr a.e.c.kerr, adam lindsay gordon cottage, adam lindsay gordon memorial cottage committee, craig's royal hotel ballarat, craig's hotel livery stables, craig's hotel livery stables metal plaque, dougles sladen, poet's corner westminster abbey, bath lane, australian poet, adam lindsay gordon bust, gardens, ballarat -
Friends of Ballarat Botanical Gardens History Group
Work on paper - The Northern Gardens and the Cutting of Grass, The Use of the Northern Gardens by the Mental Hospital for Grazing Cattle
The Northern Gardens and the Cutting of Grass. The Use of the Northern Gardens by the Mental Hospital for Grazing Cattle.john garner collection, ballarat botanical gardens, metal hospital, grass, northern gardens, gardens, ballarat -
Ballarat Diocesan Historical Commission
Irish Hibernian collar, Hibernian ceremonial collar
Ceremonial collar from Derry (Londonderry) Ireland in Northern Ireland for the Ancient Order of Hibernians and belonging to John Duddy donated in 2013 by the Macalinden family Port Fairy.A rare example of Irish Hibernian regalia in an Australian collection brought to Australia by the immigrant owner and later donated to the Diocesan Archive by his family. The object is significant in its embroidery and applique work and as an example of the importation of an Irish form contrasting to Australian variants of such collars. Significant in its representation of the contribution of migrants and the Irish to Australian culture.applique red hand of Ulster, Shamrock, Harp, Celtic cross with stars on each shoulder. Fringed in gold metal braid.port fairy, hibernian, derry, londonderry, northern ireland. -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, Barry Sutton, 26.06.1972
The photograph of the Royal District Nursing Service (RDNS) Holden Torana vehicles was taken in the RDNS Headquarters car park at the rear of 452 St Kilda Road. These cars are part of the RDNS fleet, with others housed at RDNS Centres. The cars were used by the RDNS District nurses to visit patients in their own homes. This photograph depicts two door Holden Torana cars of 1972.Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a woman Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding and a Motor Auxiliary was formed in 1929 to take the Trained nurses (Sisters) to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph of 14, some partly hidden, new grey Holden Torana two door vehicles parked in two rows in the RDNS concrete based car park. The cars are parked with their front lights, grill, bumper bars and number plates facing the left of the photograph. The cars are seen side-on with the full side-on view of the two cars at the beginning of the rows seen in the foreground of the photograph. The flat bonnet is the same width as the rest of the body of the car; the windscreen slopes upward and joins the flat roof; there are two wiper blades resting at the base of the windscreen. In line, and at the level of the windscreen, a quarter window, and two windows divided by a narrow pillar can be seen running along the side of the car above the slightly convex body work and front door. The rear window slopes back from the roof and the slope continues on the upper bodywork of the boot lid. A metal strip runs along the side of the car about half way down the bodywork, and another runs just up from the beginning of the front wheel arch to the rear wheel arch; beside the front wheel arch is the word 'Torana'. The round, with capital letters 'RDNS', insignia can be seen on the upper centre of the front door of the two cars. The solid wheel caps have the Holden logo on them. The front grill which runs between the headlights on either side of the car, slopes slightly backwards from the central Holden badge. The bumper bar below this is metal. Black number plates with white written capital letters and numbers 'LFA - 208' and 'LFA - 207' are seen on two of the cars in the front row. The tops of two front seats with headrests and the top of a long back seat can be seen inside the car. A tall brick fence is seen running along the rear and right hand side of the car park. In the left background is a two storey building with a flat roof, and behind this on its left is a part of a tall building and to its right part of a bare tree can be seen. To the buildings right rear part of a house can be seen. In front and to the right of this is a three storey brick building, with the top two storeys seen above the car park fence. Multiple windows run along both levels of this building which has a tiled hip roof. The tops of some bushes are seen behind parts of the car park fence.Barry Sutton Photographer's Stamp Quote KX83rdns, royal district nursing service, rdns transport, rdns headquarters, rdns car park -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Digital image, c.1930
The name of the Melbourne District Nursing Society (MDNS) After-Care 'Home', changed to 'Hospital' in 1934 and major extensions occurred in 1936.Melbourne District Nursing society (MDNS) opened the After-Care Home, situated at 39 Victoria Parade Collingwood in 1926 following a public appeal for funds. The name changed from MDNS 'Home' to 'Hospital' in 1934. The After-Care Home was originally established to provide nurse-managed convalescent care to poor and underprivileged people who could not look after themselves at home due to illness or on release from hospital. Opening in 1926, at a cost of £27,000, the Home included maternity, children’s and adult wards as well as accommodation for Matron, twelve nurses and four domestic staff. In 1930 an ante-natal clinic was opened at the home. During 1934 the Women’s Welfare Clinic including, at the time, a very controversial Family Planning Clinic, the first of its kind in Australia, was opened to support women at risk following multiple and difficult pregnancies. Major extensions occurred in 1936. Following Government intervention, the After-Care Hospital was separated from the Melbourne District Nursing Society in 1957 and the District division of Melbourne District Nursing Society became the Melbourne District Nursing Service and relocated to 452 St Kilda Road, Melbourne. Following Royal patronage in 1966 this became the Royal District Nursing Service (RDNS). The After-care Hospital continued to operate at the same address in Collingwood until 1985 when it became the Melbourne Geriatric Centre. Black and white digital image taken of the rear of the Melbourne District Nursing Society (MDNS) After-Care Home showing, on the right, part of a three story section of the brick built new wing. Long windows are seen along each storey separated by brick work. Above each window is a wide light strip. Attached to this wing is a narrow three storey section with one long window, with light top strip, shown on each storey. Attached to the left of this are three walkways running to the left of the image. Tall metal handrails run along each walkway. In the background beyond the lowest walkway, part of a hip roof building and a leafy tree can be seen.melbourne district nursing society, after- care hospital, after care home, rdns, royal district nursing service -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, 1967
Royal District Nursing Service (RDNS), Sister Meisser is visiting Mrs. Lata to attend to the nursing care she requires in her home. She is greeting Mrs. Lata on her veranda and is observing her interaction with her dog. Sr. Meisser is wearing her RDNS uniform of a grey cotton short sleeve frock with a small white arched material logo with 'Royal District Nursing Service' in blue capital letters emblazoned on it, attached to the upper sleeve. She is wearing her grey peaked hat. This had a metal RDNS logo attached to the centre front. Sister Meisser worked from the RDNS Moorabbin centre.From its earliest years when the Trained nurses of the Melbourne District Nursing Society (MDNS) began to wear uniforms, the chosen colour was grey, though the style changed throughout the years as fashions changed from the late 1800s through to the 1970s. Their Trained nurses (Nurses) firstly wore long grey frocks and a white cap with a long white tail hanging from the centre back. When bicycles were introduced the headgear changed to a white pith helmet adorned with a red Maltese cross in the centre front. This was held on with a veil going over the hat and tied under the chin. Over the years there were complaints that the veils became wet in the rain and they asked for a change of uniform, but this did not happen until 1921. Later the Nurses complained their skirts became wet when riding their bicycles in the rain and asked, when raining, to be able to wear breeches and gaiters. This was granted provided they wore aprons when attending patients. It was not long before the uniform changed to a shorter length grey frock, red cardigan, grey coat and grey brimmed hat; later changed to a peaked grey hat. This uniform was used when MDNS was granted Royal patronage in 1966 and worn until 1971 when the uniform changed to a blue V necked frock over a short sleeve white blouse in summer and a blue/grey skivvie under a blue/grey herringbone V neck tunic style frock made of winter material in the cooler weather. Black and white photograph of Royal District Nursing Service (RDNS), Sister Meisser, of Moorabbin Centre. She is standing on the left of the photograph; has short dark hair and is wearing her grey uniform with peaked hat and black shoes, and is holding her rectangular nursing case. She is standing on the veranda of Mrs. Lata's brick home, and is smiling as she observes, to her right, Mrs. Lata, who has grey curly hair and is wearing a light coloured floral frock. Mrs. Lata is sitting in her wheelchair and with her left hand is patting her pale coloured Labrador dog who has a dark collar and is sitting to her right. Mrs. Lata is in front of her security door which has a white door frame. The house has a white lantern shaped light attached to the wall on the left hand side of the photographPhotographer's stamp and the word 'Publicity'royal district nursing service, rdns, rdns uniform, moorabbin centre, mrs lata, sister m. meisser -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, 09 05 1967
In 1964 Melbourne District Nursing Service (MDNS) commenced a Domiciliary Postnatal Service, later called Domiciliary Infant and Maternal.Care (DIMC), when Royal patronage was granted in 1966 (RDNS). The Sisters gave Post-natal care to the mother and babes and visited for support and advice as long as needed. The central RDNS badges on the Sisters hats is made of metal and has 'Royal District Nursing Service' written in the outside royal blue circle. The inner area is divided in three parts, the top and bottom sections are a silver rising sun and the central royal blue horizontal band has the letters 'RDNS' written white capital letters.In August 1893 Melbourne District Nursing Society (MDNS), commenced a Midwifery Service with Nurse Fowler, who was Hospital trained in General nursing and Midwifery nursing, being the first Midwife employed. Mothers were assessed for suitability of a home birth, or if they required delivery at the Women’s Hospital. The Midwife worked in conjunction with the Doctors at the Women’s Hospital and if a complication arose the patient was transferred to their care. Following birth they gave Post-Natal care to both the mother and babe. In 1898 the service ceased due to lack of funds but recommenced in 1906, and in the August 1925 Annual Report the number of MDNS home births was recorded at 478. MDNS built the After-Care Home and an Anti-Natal Clinic was opened in 1930. The last Ante-Natal clinic was held there in December 1951 and the MDNS Midwifery service ceased in February 1952. In 1964 MDNS commenced a Post-Natal service with General and Midwifery trained MDNS Sisters working from a room at Footscray Hospital, and visiting early discharged Footscray Hospital maternity cases at home. Later, as Royal District Nursing Service (RDNS), this service was extended to a Domiciliary Infant and Maternal Care (DIMC), service operating from most Centres and visiting early discharged, often 24 hours after birth, maternity cases from hospitals to give post-natal care to the mother and babe. Many of the RDNS Sisters who did DIMC had their Triple Certificate (Infant Welfare), though Midwifery trained nurses also visited. Black and white photograph showing two Royal District Nursing Service, (RDNS), Postnatal Service Sisters visiting a mother and her triplets in their home. Both Sisters and the mother are smiling and sitting on a dark coloured couch with each holding one of the babes who are wrapped in light coloured bunny rugs. The Sister on the left is wearing a white gown, with the grey peaks of her uniform showing; her nursing badge is attached to the right hand peak of her uniform. She is wearing her grey peaked hat, with central attached RDNS badge, over her short dark curled hair. To her right is the mother, who has short straight dark hair, and is wearing a white blouse and dark tartan skirt. On the far right is Sister Barbara Weisart, wearing a white gown; with the grey peaks of her uniform showing, and wearing her grey peaked hat with central RDNS badge over her short dark straight hair. A set of white baby scales are seen to her rightPhotographers Stamp. Quote No. GE 13mdns, melbourne district nursing society, melbourne district nursing service, royal district nursing service, rdns, rdns domiciliary postnatal service, dimc, sister barbara weisart -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Digital image, 07.05.1937
This sepia digital image shows the Austin car which was donated to the Melbourne District Nursing Society (MDNS) in !937 by the Rotary Club of Victoria. It was used by the Matron of the MDNS District Division to visit patients weekly. The photograph is taken outside the MDNS Headquarters at 39 Victoria Parade, Collingwood. The photograph appeared along with an article in The Age Friday May 7, 1937. The photograph appeared in the MDNS Annual Report of 1937. On page 8, mention is made of J.D Johnston Esq, President of the Rotary Club of Victoria, presenting the Austin vehicle to MDNS. Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a woman Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding and a Motor Auxiliary was formed in 1929 to take the Trained nurses (Sisters) to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. In the foreground of this sepia photograph is a side-on view of a four door 1937 style small grey car with a nose shaped bonnet, parked on the road beside the kerb with the headlight facing to the right of the photograph.The bonnet joins onto a straight windscreen which adjoins a slightly curved hood running back along the car. This adjoins a back window which joins onto the sloping rear body of the car with a small protruding boot. Windows are seen above the body work of both facing doors and a smaller sloping window above the body work and rear wheel arch. On the drivers door is a Maltese cross and the words "Melbourne District" written above the Maltese cross and "Nursing Society" below it. In front of this door the body work forms a wheel arch and the headlight is attached between this body work and the bonnet. Rubber tyred wheels with solid hub caps are seen below each wheel arch. On the footpath, behind the bonnet of the car, four Melbourne District Nursing Society (MDNS) Trained nurses (Sisters) are standing. They are wearing dark grey coats over their grey uniforms with white collars, and brimmed grey hats with a Maltese cross on the light coloured headband. The Sister on the right has her left hand gripping the handle on top of her oblong nursing case. A metal spiked fence is behind the Sisters, which runs to the left into one of the two square concrete columns which sit either side of a path. A hedge is behind the fence, and behind this part of a building with three arched windows can be seen. A white plaque is attached to the fence near one of the columns.mdns, melbourne district nursing society, rotary club of victoria, mdns transport, rdns, royal district nursing service, rdns transport -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, Barry Sutton, 24.06.1971
The photograph of the Commission Van is taken at the RDNS Service Centre at Chessell Street, South Melbourne. The three men are employed by the Royal District Nursing Service.In 1971 the Commission shop donated a Van to the Royal District Nursing Service (RDNS), to be used by the Maintenance crew for delivery of equipment and transporting goods and documents between RDNS Centres and Headquarters. It was also used for transporting Maintenance staff and the equipment they required to do maintenance work at RDNS Centres as needed. The Commission Van was kept at the RDNS Service Centre at Chessell Street, South Melbourne.Black and white photograph showing the side view of the Royal District Nursing Service (RDNS), Commission Van. The white snub nose Van, which has a closed passenger door and another further along, is standing with its front close to a brick building and sits on brick paving which extends onto earth. Three short windows can be seen along the top quarter of the Van. Both back doors are open. Mr. J. Grigg, with receding dark hair, is standing to the left of the photograph near the rear door, and has his hands on the hand grips of a wheelchair. Mr. J. Greet, is standing in the back of the van with his hands on the metal handles of a square metal commode as he hands it to Mr. Pincher, who has wavy short hair and is standing on the ground to his right. He has his hands on the main body of the commode. The three men are wearing their grey work coats over their clothes. In the background part of a two story dark brick building can be seen. On the ground floor, on the left, part of a dark door can be seen with a small window immediately above it, and further.above this is some light fan shaped brick work, three vertical bricks in height. To its right part of a window with the same brickwork can be seen and to the right along the building is part of a window with arched light brickwork followed by more brickwork and part of a door. Black pipework runs down some of the brickwork. Above the brickwork runs a row of light colour material, and above this part of the upper section in grey concrete can be seen.Photographers stamp. Quote No. KH 80mr j grigg, mr. j. greet, mr pincher, rdns equipment, royal district nursing service, rdns, rdns maintenance -
University of Melbourne, School of Chemistry
Microbalance
An original Kerr-Grant Microbalance, modified by E.J.Hartung This balance was invented in the chemistry department by Bertram Dillon Steele, later first Professor of Chemistry at the University of Queensland 1910-1930, in collaboration with Professor Kerr Grant, Physics. The design was widely used by other chemists, including Masson's mentor, Professor Ramsay, working in London on newly discovered rare gases (especially Radon), and Professor Hartung in Melbourne, investigating the chemistry of the decomposition of silver salts in photographic processes. The principle of the microbalance was to measure the change in density of a gas by the shift in the balancing beam due to a change in pressure of the gas in the balance case. The quartz balancing beam was made by Bertram Steele who was particularly skilled in glassblowing. A quartz beam is the beam of the Aston microbalance based on the Steele/Grant instrument, and described by F.W. Aston, the inventor of the mass spectrometer. The bulb at one end of the beam contained a fixed amount of air, so that a change in the pressure of gas in the balance case changed the buoyancy of the beam, yielding a displacement in the beam which could be measured. By this means, differences in weight of about 10 nanogram could be measured, in amounts of up to 0.1 gram. Such differences are significant the increase in weight of a metal sample due to surface oxidation (Steele's interest) in the weight loss due to radioactive decay of Radium (Ramsay's work), and in the estimates of density change due to the isotopic distribution of Neon (Aston). Ernst Johannes Hartung was a chemist and astronomer. Educated at the University of Melbourne (BSc 1913, DSc 1919), he became lecturer in 1919, associate professor in 1924, and succeeded Rivett as chair of chemistry in 1928, remaining in this position until 1953. Hartung?s lecturing style surged with enthusiasm and he employed the use of screen projections to demonstrate chemical phenomena to large undergraduate classes. In 1935 he recorded Brownian movement in colloidal solutions on 35 mm cinefilm, which was later copied onto 16 mm film for the Eastman Kodak Co. World Science Library. This can be viewed in the Chemistry laboratory. He researched the photo decomposition of silver halides, and was awarded the David Syme Prize in 1926. He devoted time to the design and construction of a large, new chemistry building for the School of Chemistry (built 1938?1939). During World War II he was approached by Professor Thomas Laby, chairman of the Optical Munitions Panel, to chair the advisory committee on optical materials, to produce high quality optical glass in Australia. This was successful, with large-scale production achieved within ten months at a reasonable cost. Hartung served three terms as general President of the (Royal) Australian Chemical Institute, was an ex-officio councillor of the Council for Scientific and Industrial Research, and a Trustee of the Museum of Applied Science (now part of Museum Victoria).An original Kerr-Grant Microbalance, modified by E.J. Hartung. -
Melton City Libraries
Photograph, Melton Railway Bridge, c.1884
"The Melton Viaduct, opened in 1886, is of State heritage significance as a very large and visually distinctive wrought iron, lattice girder trestle bridge over the Werribee River (now Melton Reservoir). It comprises 18.3 and 9.1 metre spans, in a generally alternate arrangement, of total length 375 metres, and standing 38 metres over the Werribee River. Wrought iron small section iron was used to build tension trussed trestle legs, which supported four lines of rivetted wrought-iron deck-type double lattice trusses. It has bluestone abutments and pier bases of coursed rock-faced bluestone with drafted margins. The larger half-piers, now usually submerged in the Melton Reservoir have sharp tapered cutwaters and curved coping at the tops. While designed to carry two rail tracks it has only ever been used as a single track line. Despite several alterations to its deck structure, it remains an outstanding example of a lighter structural design employing open metal trestle supports and metal truss girders. The direct Melbourne to Ballarat railway link of which the Melton viaduct was the major engineering work contributed significantly to the history and development of Victoria. This new link reflected Ballarat’s diversifying economy as well as the commercial and political influence of the metropolis. Construction of the bridge, and the associated large workers camp, were extensively photographed, documenting an important episode in local history. The railway enabled the development of new industries in the Melton area, notably the timber industry and a chaff industry of national importance, greatly facilitated the later transition of the Shire from a pastoral to a farming economy, and struck a major blow to Melton township’s era as a wayside town servicing Ballarat road (especially coach) traffic". Melton Railway Bridge being built across the Werribee Rivertransport -
Parks Victoria - Wilsons Promontory Lightstation
Anvil
As quoted from Wikipedia, ‘An anvil is a block with a hard surface on which another object is, struck. The block is as massive as it is practical, because the higher the inertia of the anvil, the more efficiently it causes the energy of the striking tool to be transferred to the work piece’. The lightstation’s anvil is a red-painted iron block with a conical beak or horn at one end that was used for hammering curved pieces of metal. It would have stood on a heavy free-standing pedestal, such as a large tree stump, to allow complete access to the item being hammered. Some anvils display the manufacturer’s name in the metal on the side, but this is not the case here, and its age, although unknown appears to be quite old, perhaps c.1900. It appears to have had a lot of use, and although no record of this survives, it is presumed that a forge operated on site for hammering, cutting, shaping and repairing tools such as bolts, nails, hooks, chain segments, pulley blocks, hinges, crow bars, picks, chisels, horseshoes and harness hardware. A hames hook (which forms part of the collar worn by a draught horse) survives at the lightstation as do many other heavy metal tools and pieces of equipment. The anvil is an example of the necessary resourcefulness and self sufficiency practiced by lightkeepers working and living in a remotely located workplace and home, and many of the iron items in the collection may have been repaired or even made on its working surface. As a lightstation manager Chris Richter used the anvil to manufacture pulley blocks for sash windows, repair brass door hinges & sharpen cold chisels, crowbars and picks and other lightkeepers have used this anvil for many fabricating jobs such as manufacturing ducting for the generator room ventilation system."The lightship only came in every three months with supplies and there would have been repairs to do between visits from a blacksmith - who would have had to travel on the ship. Also, the ship was only anchored in the bay long enough to unload supplies and collect and deliver lightkeeping staff – probably not enough time to get much smithy work done – especially if the weather packed it in and the ship had to depart. Lightkeepers in our time had to be self sufficient, resourceful and innovative and I imagine that would have been the case in the past." It has second level contributory significance.Red painted blacksmith's anvil. -
Melbourne Legacy
Badge, Legacy Appeal Badge 2019 - $10, 2019
An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value is $10. The badge was for sale in 2019 as the date is on the badge. It is in the collection to show the modern equivalent of the older style badges. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. The card makes a tax deductible receipt.Example of Legacy badges that were sold up to raise money for Legacy's work. Circular emerald green Legacy Appeal badge x 2 with the Legacy torch, it is made of gold coloured metal with green enamel around a torch and wreath, the word Legacy and the date 2019. It is on a white card with blue printing showing it's value. Badge has a post and a separate butterfly clutch.legacy appeal, fundraising, badge week -
Falls Creek Historical Society
Ski Lift Tokens, 1970s
These tokens were used at Falls Creek throughout the 1970s to ride on the chair lifts. The tokens were donated by Veikko Tanner. He owned and operated Karelia Lodge at Falls Creek during the 1970s. At that time Veikko was also area manager for the ski resort. He also worked as a "powder monkey" during the blasting of the ski runs.These tokens are significant because they represent a stage in the progression of chair lifts and technical developments at Falls Creek.2 tokens for use on the Ski Lifts at Falls Creek. The bronze token is for use on the Novice Lift and the gold metal token is for one ride on a Major lift.Both tokens - an image of a skier and "Falls Creek" Gold metal token reverse - Around edge - ALPINE DEVELOPMENTS HOLDINGS FALLS CREEK In centre - SINGLE RIDE MAJOR LIFT Brass token reverse - Around edge - ALPINE DEVELOPMENTS HOLDINGS FALLS CREEK In centre - SINGLE RIDE NOVICE LIFTfalls creek chairlifts, chair lift tokens, veikko tanner, karelia lodge, alpine development holdings pty ltd -
Falls Creek Historical Society
Equipment - De-Icing Hammer, 1970s - 1990s
This hammer was used by workers on the ski lifts to clear them of ice. The hammer was turned by the Ski Lift Company and had a long reach. It was mainly used on the Summit T-Bar and the International Poma before they had catwalks to enable easier access for maintenance. This item was donated by Douglas Zolla. He has worked in Falls Creek for over 30 years. From 1987 until 2002. Doug worked as a De-icer with the Falls Creek Ski Lifts Company. For many years he has been a guide with Falls Creek Snowmobile Tours.This equipment is significant as it was created by the Falls Creek Ski Lift Company to ensure safe operation of their ski lifts.A metal hammer with orange tape on the handle and a rope attached.ski lift maintenance, falls creek ski lifts, de-icing ski lifts