Handle Weld line Weld Splodge Rusted holes in bottom of bucket (2)

8676.1 - Dark stain draw set with metal handles that have slots for labelling. 8676.2 - Wooden draw with metal handle that has a slot for labelling. 8676.3 - Wooden draw with metal handle that has a slot for labelling. 8676.4 - Wooden draw with metal handle that has a slot for labelling. 8676.5 - Wooden draw with metal handle that has a slot for labelling. 8676.6 - Wooden draw with metal handle that has a slot for labelling.- NUDEX

8691.1 - Large brass measuring container, it measures a gallon in total. It has brass handles at the base of the container. It also has a glass lid. 8691.2 - Large brass measuring container, it measures a half gallon in total. It has brass handles at the base of the container. It also has a glass lid. 8691.3 - Medium brass measuring container, it measures a quarter gallon in total. It has brass handles at the base of the container. It also has a glass lid. 8691.4 - Medium-ish sized brass measuring container which measures a pint in total. It has brass handles at the base of the container. It also has a glass lid. 8691.5 - Small brass measuring container which measures a gill in total. It also has a glass lid. 8691.6 - Small brass measuring container which measures a gill in total. It also has a glass lid. 8691.7 - Very small brass measuring container which measures a half gill in total. It also has a glass lid.8691.1 - Imperial Standard Gallon - Victoria 8691.2 - Imperial Standard Half Gallon - Victoria 8691.3 - Imperial Standard Quart - Victoria 8691.4 - Imperial Standard Pint - Victoria 8691.5 - Imperial Standard Half Pint - Victoria 8691.6 - Imperial Standard Gill - Victoria 8691.7 - Imperial Standard Half Gill - Victoria

8694.1 - Medium sized wooden box with two pull down latches and a hinged lid. It also has a metal handle on top. 8694.2 - Large brass weight with handle on top. 8694.3 - Medium brass weight with handle on top. 8694.4 - Small brass weight with knob-like handle on top.

8508.1 - Conical, with hooked wire handle and tubular spout. Lid missing.

8491.1 - Small tin box with a hinged lid, brass lock and a loop of wire for a handle.

8488.1 - Small truncated cone with flat disc lid, bent wire hook/ handle and tubular metal spout.

8484.1 - Small overall cylindrical lamp and reflector disc may be missing but pertaining bent wire handle.

8471.1 - Truncated cone with bent wire handle and long spout. The end of which seems to have been crushed closed around some cotton wick, lid is missing, though wire loop hinge remains.

8469.1 - Tall truncated cone with a small flat hinged disc lid, bent wire handle and long tapering spout with cotton wick present.

8468.1 - Small tallow lamp, truncated cone with bent wire handle, simple flat disc hinged lid and long near cylindrical spout.

8467.1 - Small tallow lamp, truncated cone with bent wire handle, simple flat disk lid and long near cylindrical spout. It appears to still retain cotton wick in the end of its spout.

8667.1 - Black painted metal box with a metal handle on the top. The lid opens with hinges at the back. It also has a key hole at the front. 8667.2 - Small black painted metal box used for coins. On the left and right of the small box are lids with little handles on top.

8422.1 - Pickaxe- wooden handle, thickened and flared at one end to which is attached a narrow double-pointed pick head

Cream yellow box with three objects and a velvet blue lining. 11008.1 - box is yellow cream with blue velvet and a rusted ribbon (black). 11008.2 - cream yellow dome handle. 11008.3 - cream yellow large tweezers - is rusted on the ring that opens object. 11008.4 - large handle with rusted hook and small design on bottom.Made in England 11008.1 - who it was donated by.

Prior to the 1900s, complicated births, particularly where there was a disproportion between the size of the woman’s pelvis and the foetus’ head, often meant the death of the baby and the mother. Instruments for removing a dead or ailing foetus from within the mother were used to attempt to save the mother’s life. The cranioclast, first invented by Dr. James Simpson in the mid-19th century and later redesigned by others, was used for fetal destruction and removal. Fundamentally a strong pair of forceps, the cranioclast was used to crush the skull, decreasing its diameter. In some cases, this would allow normal uterine contractions to expel the foetus; in others, the physicians would use an obstetrical hook to pull the body out of the mother. Doctors disagreed as to the pelvic diameter that would necessitate this drastic intervention, but generally found that 3 to 3.5 inches was the smallest size through which a living infant could pass. Equally of debate was the pelvic size through which the dead fetus could be extracted. When vaginal extraction was deemed unadvisable, Caesarian section would be performed. As caesarean section became safer and more common with the advent of anaesthetics and antiseptic techniques, the use of cranioclasts and obstetrical hooks diminished. (Museum of Health Care, Kingston) Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Hinged metal tool with bakelite handles at one end and serrated teeth at other end. The instrument is in two sections. The right or upper blade has a black bakelite handle. There are two screws on the inside of the handle, 5.5cm apart. In the centre of the blade is a screw notch in the shape of a small horseshoe. On the inner side of the blade is a depression extending most of the length. The left, or lower, blade also has a black bakelite handle. There are two screws on the inside of the handle approximately 6cm apart. Mobile metal clasps in the shape of an 'S' , with three serrations, is attached to the distal end of the handle, which enables the blades to be opened or closed. destructive instruments

Uterine dilator, with a measurement dial and screw. The screw is at the top of handle and is used to activate the dilator. There is a number inscribed on the handle. There is a small metal attachment below the dial at an approximately 45 degree angle. The attachment has a flange, and in a fixture for fitting rubber tubing and a douche to the dilator.

Created as American motor vehicle first aid kit in World War 2 but used in Vietnam. Green metal first aid box with hinge, two metal clasps and metal carry handle. Inside lid has label "24 Unit Kit" and general first aid instructions.Kit contains 11 cardboard boxes containing: 3x 4 inch bandage compress, 2 inch bandage compress, eye dressings, 3 eye dressing sets, 3x burn injury set each with 2 orange tubes of ointment and small wooden spatula , 2 large first aid dressing, I card with 5 safety pins, one tourniquet with instruction label attached, jar of Vaseline, 2 x pieces of cotton fabric ( possibly cut from a singlet)'First aid for emergency use only"/ U.S. Army Medical departmentfirst aid, medical, united states equipment, kit, us army, bandages, tourniquet

Collection item from Kyneton MuseumSmall black pouch shaped drawstring purse Woven with ribbed effect and pink and green chevron stripes Metal ring gathers top and two metal rods and linked chain handles

This Victorian era china cup with gilded gold writing and decoration, along with the words " A Present", may have been given as a gift or, because of its small size, been a replica coffee cup for a child to play with.743.1 - Small white china cup, cylinder-shaped, gilded and glazed, with forefinger and thumb grip handle. Gilt decoration and lettering.Gilt Lettering in gold colour- "A Present" on front of coffee cup.cup, miniature, coffee, present, china, white, children, gift, gilding, handle, christening, victorian, font, printing, collectables, gold lettering

Small wooden gavel used by Auctioneers, round cylinder head and narrow handle held by nail.commerce, office equipment, gavel

A small round jug from Bendigo's pottery.Bendigo Pottery Australia logo next to the handlebusiness, retail, material, bendigo pottery's website

Object. (a) A circular metal disk, slightly convex with six tiny crosses spaced around the outer rim. Shaped like a funnel at the rear, the handle extends into a 16 cm stem which would fit over the walking cane. Eight raised circles decorate the stem, giving a .8 cm decorative ridge. Four circles impressed below the lower edge. A hallmark is impressed below these circles, xo.... with remainder unreadable. (b) Circular rounded top, decorated with concentric small circles, raised slightly, and each centred with a tiny blue gemstone. A larger Royal Blue, circular raised gem stone is at the centre. This knob is 6 cm in diameter.costume accessories, female, ladies walking cane

Object. Rectangular in shape, 15 cms x 10.5 cms mirror frame, with a 17 cms handle. The mirror has a bevelled edge, and is backed with a deep cream linen fabric embroidered in a fine silk floral-spray petit pomt embroidery. The frame is marked 24 ct. GPL (24ct gold plate). The handle adjoins the mirror with three graduated circles, and three more circles, graduated in diameter, form a small ''knob''at the lower edge.24ct Gold Platedomestic equipment, gold, 24ct gold plate hand mirror

.A clear glass bottle with eight one centimetre wide vertical groves in most of its length. Painted on the bottle in white is, C.J.GLOVER ,TRADE MARK PROGRESS REGISTERED, which has a coat of arms over it, BENDIGO, BRITISH SYPHON CO, LTD LONDON, REGNO 762. The bottle is 10.5 centimetres diameter at its base and tapers to eight and a half diameter, in the next 20 centimetres, the next eight centimetres tapers to three and a half centimetres the last eight centimetres to two and a half centimetres, the next three centimetres it rounds off to three centimetres. There is a red metal cap on top which is three centimetres diameter for two centimetres then tapers for two centimetres to one and a half centimetres which continues for two and a half centimetres with a slight flair at the top There is a small wooden cap on the top and a four by one centimetre curved wooden handle is attached near the top. On the tapered part of the cap there is metal tube protruding down at a 45-degree angle and is four centimetres long and one centimetre diameter. The bottle has a small amount of liquid in it.bottle, c.j.glover, soda bottle

The Corona Paint Company Pty. Ltd. Bendigo was formed in November 1920 with £10,000 capital, in £1 shares. By July 1921, the Company had completed its factory and plant at Bendigo East, ready to begin the manufacture of paints. The Corona Paint works were opened on Saturday 28 January by the Prime Minister (Mr. Hughes) during a visit to Bendigo. Many new manufacturing industries were opened during this time after calls to address the decline of mining in the region. The factory of the CORONA PAINT COMPANY, BENDIGO, was advertised for sale in The Argus on 5 October 1923. It consisted of a “building on a railway siding, plant and machinery, including dry grinding plant, kalsomine mixer, paint mill, furnace, electric motor, etc., large stores of raw and finished material, kalsomine with range of 21 colours, oil paints, &c.”A cast iron embossing press. It's painted black with gold coulered floral decorations. The base is 18 centimetres long, nine centimetres wide and one and a half centimetres thick. A curved protrusion rises from the base that is eight centimetres by four centimetres which narrows to four centimetres by two and a half centimetres with a three-quarter centimetre wide slot. Inside the slot is a lever action with a ten centimetre by two and a half centimetre wooden handle. There is a removeable die on the end of the lever and an opposite removeable die the base. A small oval metal disc with paten no 3965 on is attached. The seal is The Corona Paint Company proprietary Limited seal embossing press, corona paint company