An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value is $10. The badge was for sale in 2022. It is in the collection to show the modern equivalent of the older style badges. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. The card makes a tax deductible receipt.Example of Legacy badges that were sold up to raise money for Legacy's work. Circular Legacy Appeal badge with the Legacy torch, it is made of gold coloured metal with sky blue enamel around a torch and wreath, the word Legacy and the date 2022. It is on a white card with blue printing showing it's value of $10. Badge has a post and a separate butterfly clutch.legacy appeal, fundraising, badge week

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. The donation value is $5. The bear is one of the Legacy symbols. It is in the collection to show the modern equivalent of the older style badges. The card makes a tax deductible receipt.Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal badge of a bear's face with a dark green hat and blue around the words 'Melbourne Legacy'. It is made of gold coloured metal with coloured enamel. It is on a white card with blue printing showing it's value. Badge has two posts and two separate butterfly clutches.legacy appeal, fundraising, badge week, bear

Index, notes, p.132.non-fictionThis 1866 collection of essays on "Work," "Traffic," and "War," begins with a preface condemning the human depletion of nature for what Ruskin saw as valueless gains. In this way, mining the ground for metals, water, and other resources parallels the work of the three lecture topics--all is done for the money. But what Ruskin wants to know is what the ultimate effect and product of their work is? john ruskin 1819-1900, ethics

It is not clear that this fringe was ever attached to the curtain suite; it may have come from an associated part of the original ensemble (eg pelmet) or from associated furniture. However, it is certainly connected to the fringe on the tieback tassels, whose tassels are finished with the same product. The detached gilt metal fringe has aesthetic significance as specimen of an opulent furnishing decoration in very lavish contexts, such as gold rush Victoria. Part of it still preserves the original bright gold metal, ie is untarnished; this is probably quite rare in Australian collections.Board wrapped w c.17m of heavy gilt metal fringe (known as bullion fringe) in several pieces, evidently detached from curtains, and/or furniture items. (No sign of it having been attached to the curtains). The fringe is composed of metallic thread very tightly wound over a cotton/linen thread, attached to a narrow header braid with an ornamental design worked in metallic gimp cord. The colour was originally gold, now tarnished on all parts exposed to air, but sections of the fringe under the top layers retain the luxurious gold finish. Westman (2019: 242) explains that 'gold thread' was made of gold fired onto silver bars from which thin, flat or round wires were cut to wrap around a core linen thread for use in trimmings. Shen notes that the very thin layer of gold often wears away, exposing the silver which tarnishes. Bullion fringe: fringe made of bullion, in the sense of precious metal, used for prestigious royal, ecclesiastical and military garments and furnishings. Westman (2019: 193, 240) says that by the 19thC, the name was also used for twisted thread long fringe made of wool, silk, cotton or a mix, as it is today. In this form, 'bullion fringe' became a lavish edge-trim in the early-mid-19thC wherever its vertical look could add richness to drapery. interior decoration - history

See cat 5727.2 for Service details. Dust coats were donated with the Keith Balfour Gordon GILL RAAF uniforms.1. & 2. Dust coat - Khaki colour cotton fabric, long lenhth, half pintucks on bodice, long sleeves, full belt with metal buckle. Dust coats appear to be female. 2. Long sleeves have been cut off.Maker's labels - Black print on white cotton label - "Q136 MADE IN AUSTRALIA/1944/ size 24. - Black print on beige colour paper - MADE IN AUSTRALIA/Q136 1944/ size 24/ Height 6.0/Bust 42.uniforms, raaf, ww2

Used on tram 27 to celebrate is "1,000,000" miles, but later work determined that there had a been an error in addition of the miles operated statistics - see reference for the background story. Three copies held. See item 3315 for other copies.Demonstrates a banner to mark a tram that had been calculated to achieve 1,000,000 miles of running in Ballarat.Bammer - Painted on treated white linen, banner used to celebrate Tram No. 27, reaching 1,000,000 miles. Has wording in large red capital letters "This tram has just completed 1,000,000 miles in Ballarat". Fitted with metal eyelets in each corner and centre of top and bottom edges. See Reg. Item 3316 for photo taken by The Courier on 29/6/1968. Has been rolled around a tube for storage. Not known who made it - SEC or TMSV. See item 3315 for another two copies.tramways, trams, million miles, banner, signs

Commendation issued to the team which worked on amalgamating various units to form Bandiana Logistics Group. Keith Cooper was part of this team. Part of the Cooper Collection. See Catalogue No. 9586.2 for details of service for "Keith Cooper" No. 3798359.Framed certificate on cream coloured card. Australian Army Insignia at top. Lettering in black printing. Copy of issuing officers signature on bottom RH corner. Frame is black coloured wood with gold border. Glass covering the certificate. Wire strand attached to back with small metal eyes to facilitate hanging.cooper collection, keith cooper, commendation, certificate, bandiana logistics group

The savage face of war unmasked, the best work of fiction about the Vietnam Warvietnam war, 1961-1975 - fiction, full metal jacket (movie)

This woodgraining was done in the early twentieth century by Ballarat painter and decorator C. Pennant who did similar work in the city. As with his work throughout the house it shows that the metal locks were similarly woodgrained and this is a rare surviving example of his work especially in a domestic home.nil,door, architecture, interior decoration

This image is one of a series of photographs taken by Melbourne based photographers Stevenson and McNicoll who visited Bacchus Marsh and its nearby districts between September and November 1883. William Marshall opened his new premises in Main Street in June 1869. In the following November he opened a wheelwright shop adjacent to his smithy. Mr T. Carlton was the wheelwright. The Marshall Blacksmith building was located next to the ANA Hall in Main Street. It was demolished in 1910 to make way for a new building known as the Chambers Building. In the nineteenth and early twentieth centuries, the blacksmith played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Complementing this work, the forge was often allied with a wheelwright's shop. These premises also acted as a meeting place for the men of the town, where news was shared and friendships forged. Small sepia 'carte de viste' style unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. William Marshall opened his new premises in June 1869, and in the following November opened a wheelwright shop adjacent to his smithy. Mr T. Carlton was the wheelwright. The photograph shows a brick building with two gables and two large doors, indicating that a second workshop has been added to the original building. Parts of a picket fence and two cartwheels lean against the wall. Three men stand at the front, two wearing the distinctive farrier’s apron slit between the knees. The third man is wearing more formal clothing. Two of the men hold the reins of two horses. A picket fence runs along the front of a spare block at the side of the building. The deep gutter is straddled by two crossing points. Printed On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. blacksmiths, shops bacchus marsh vic., william marshall 1839-1914

James Reid was born in Scotland near Glasgow and came to Victoria as a young man in 1854. Shortly after arriving he came to Bacchus Marsh where he lived until his death in 1902 at the age of 74 years. For most of these years he conducted a wheelwrights and coach builders business in Bacchus Marsh. In the nineteenth and early twentieth centuries, wheelwrights and blacksmiths played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, wheels and other components of vehicles for transport, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Complementing this work, the forge was often allied with a wheelwright's shop. These premises also acted as a meeting place for the men of the town, where news was shared and friendships forged.Small sepia 'carte de viste' style unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. An image depicting a wheelwright and blacksmith's shop, with a group of men, boys and a woman shown in front. Two men are wearing the work clothes of the blacksmith, including the split leather apron worn by farriers to enable them to work on the hooves of the horses needing shoeing. Two young boys are standing by the door. A portly gentleman in formal clothes stands before the shop. The house shown at the rear was James Reid's residence. Two people, an elderly gentleman and a younger woman, are seated in a jinker on the road to the side of the shop. A collection of wheels and farm tools leans on the walls. A triple-tiered sign above the shop reads: JAMES REID WHEELWRIGHT BLACKSMITH. TIMBER - YARD PAINTS, OILS & GLASS.Printed On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE.wheelwrights, james reid 1828?-1902, stevenson and mcnicoll 1883 photographs of bacchus marsh and district

This timepiece uses raised dots to indicate the position of the numbers, which the wearer could then use to orient themselves and tell the time from the metal hands. The 12 position is indicated by three dots, with the 3,6,9 positions by two dots. The user would start with a finger at the centre of the face and work outwards to the end of each hand to determine position and hence be able to figure out the time. Since the watch is designed and made for touching, the metal hands are particularly robust.Silver fob watch with raised dots to indicate number position. assistive devices, braille

Photo shows Geelong tram 36 outbound to North in Mercer St at Ginn St. In the background is a shop selling Franklins Lemon Swish, a four & Twenty Pie shop, Toppa Ice cream, a Coca Cola truck, a Hotel advertising Richmond Lager, three parked buses and a shop advertising hot pies. On the pole is a tram stop with a metal "CARS STOP HERE" sign. On the left-hand side of the photograph a surveyor can be seen at work.Yields information about the Geelong operations toward the closure of the tram system.Black and white Negative - 120 sizetramways, geelong, mercer st, tram 36, tram stops

Polish-born designer David Waters first began producing swimwear in 1952. His mother Halina had recently opened a stall at Melbourne Queen Victoria Markets and was looking for swimsuits to sell; unable to find any she liked, she asked David to design something. He began making swimming costumes using his mother's sewing machine, in between his shifts working at a knitting factory. He had soon set up a small business in his parents' home, cutting patterns in one room while a machinist sewed them together in the next. His company, which he named Watersun, would become an iconic Australian swimwear label. During the early 1960s, Watersun developed its "Unquestionable Bra", an inbuilt moulded bra which was marketed as giving wearers a more natural bustline than other labels. The company was also known for its matching swimwear and beachwear, producing dresses, kaftans, tops and skirts in identical colours and prints to those used for many of its swimsuits. By 1967, the company was reportedly one of Australia's two biggest swimwear manufacturers, with over one hundred employees. Watersun was sold to Ada Productions in 1984 and was later acquired by Trackerjack Australasia. This swimsuit is believed to be one of a large quantity of samples, seconds and unsold Ada Productions stock donated to Brighton Historical Society in late 1990 by Brian Samuel, who worked at the company between 1979 and 1990.Two-piece swimsuit with navy blue and white horizontal stripes. Cropped top (.1) has inbuilt underwire bra and metal fastening at back. Shorts (.2) are high-waisted with longer legs. Matching top (.3) has diagonal navy and white stripes and an asymmetrical hem. Sleeveless with round neck. Velcro fastening on shoulder and side seam of shorter side. No label.swimwear, watersun, david waters, ada productions, melbourne designers

The Australian Tramway Employees Association commissioned in 1915, a banner for use in marches or events. It was painted in 1916 by George Grant with its first public appearance at the Eight-Hour Day Diamond Jubilee on 10 April 1916, celebrating the 60th anniversary of the introduction of an eight-hour working day in Victoria. The reference gives a detailed history of the banner, it significance and the background to its painting. It is now held in the collection of Museums Victoria. The ATEA was the forerunner to the Australian Tramway and Motor Omnibus Employees' Association, now part of the Rail Tram and Bus Union. Image provided by Museum's Victoria to the donor - Peter Jewell. The image demonstrates the artists work and the use of symbols in the roles of a union.Framed Image - old gold coloured metal frame, Artglass, with red colour card surround with bevelled gold card inlay containing a high resolution image of the Australian Tramway Employees Association banner. Fitted with a metal hanging wire and a white surround, tape and the framers lable.tramways, unions, atea, atmoea, rtbu, banners, george grant, eight hour day

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. In this example, the Rules of Membership for the Victorian Braille Writers were attached to the board.1 wooden back board with metal hand frame and stylus156 carved into wooden framebraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. Sometimes the board was labelled with organisational labels. In this example, the Rules of Membership for the Victorian Association of Braille Writers was attached, which included the costs of being a transcribing member and the length of the loan period. It is signed by Millicent Ritchie (Hon. Secretary) and Minnie H Crabb (Asst Sec and Librarian) at the base of the sheet.Brown rectangular wooden board with hinged paper clamp and metal hinged guideFree Lending Library for the Blind label is attached to boardbraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping.Brown plastic rectangular hand frame with holes evenly spaced on either long side. Hinged Braille metal guide with space for 2 rows of Braille, each 35 cells long. braille equipment, rnib

During surgery under general anaesthetic, these forceps were used to pull the tongue forward to keep the patient's airways clear from obstruction. This tool was in general use from the 1930s onwards in teaching hospitals, and became a standard piece of equipment on all anaesthetic trolleys. In the majority of teaching hospitals, the blades of these forceps were smooth and wide to cause less trauma to the tongue. This particular style of tongue forceps is known as Guy's tongue forceps.Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Pair of metal forceps. Similar in appearance to a pair of scissors, and other surgical forceps, but with rounded teardrop shaped tips. There is also a notch clip for the handle to keep the forceps open. Inner aspect of both forceps blades engraved with the number '3'. The left hand blade is also engraved with a 'P'.anaesthesia

Originally this teaching model belonged to Prince Henry's hospit�l library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Model of female uterus with cross-section revealing a foetus, also, fallopian tubes and ovaries with cut away section revealing vagina and cervix. Painted plastic on metal rod with round wooden stand. Labelled on base "AV618.2 / 01 Fetus". Stamped on base, "PRINCE HENRY'S HOSPITAL/ NURSES LIBRARY." Label underneath base"Adam Rouilly/ London England".teaching model, anatomy, female uterus

Nell Grigg, in uniform, was a Red Cross Transport Driver during the second World War.Original black and white photograph, in ornate metal frame, of man in wheelchair being pushed into ambulance.nell grigg, red cross, world war ii, war work

This plan is of great significance to the local history of Warrnambool, in particular the Breakwater and its impact on Warrnambool's maritime and trade history. The plan shows the existing jetties at the Port of Warrnambool, plus the partially erected Breakwater and proposed works to the Breakwater by both the Borough of Warrnambool Surveyor and Sir John Coode. The plan was signed 28th February 1879 by Sir John Coode. The legend at the bottom left describes the existing works and the proposed works. The Warrnambool Breakwater Sir John Coode was a British harbour engineer. He was brought to Melbourne by the Melbourne Harbour Trust to advise on works to improve the Port of Melbourne. The Victorian Government commissioned him to present a plan to complete the Warrnambool Breakwater. His original plan was too expensive so he prepared a revised plan for a shorter structure. The work was completed in 1890. The construction proved to be too short to protect adequately from the weather and didn't allow enough depth for larger vessels to come into port. The decreasing trade was further affected by siltation in the bay due to the breakwater, and the completion of the railway line. The situation of the harbour became a real problem that, by 1910, required continuous dredging. In 1914 the Breakwater was extended but proved to be a failure because the work began to subside and by 1920 about two thirds of the harbour was silted up. Alterations made in the 1920's increased the silting problem and by the 1940's the harbour was no longer used. More alterations were made in the 1950's and 1960's. The Warrnambool Breakwater is registered as a place of significance on the Victorian Heritage Database. This plan of the proposed works for the existing Warrnambool Breakwater is of great significance to the local history of Warrnambool, in particular the Breakwater and its impact on Warrnambool's maritime and trade history. The Warrnambool Breakwater is registered as a place of significance on the Victorian Heritage Database (VHR H2024). It is historically significant to Victoria as one of the most important maritime engineering projects in Victoria in the late 19th century. The Warrnambool Breakwater is of historical significance as one of the most important maritime engineering projects in Victoria in the late nineteenth century. It is evidence of Victoria's nineteenth century investment in regional port infrastructure and the development of Victorian coastal shipping. It is of significance for its association with the English civil engineer Sir John Coode, the most distinguished harbour engineer of the nineteenth century, who was brought to Victoria to advise on works to improve the Port of Melbourne, but was retained by the Government to advise on improvements to the harbours at Portland, Geelong, Port Fairy, and Lakes Entrance, as well as Warrnambool. His projects for Melbourne, Lakes Entrance and Warrnambool were major engineering projects of the nineteenth century. The breakwater is historically significant as a reminder of Warrnambool's early maritime history as a Western District port, and as one of Victoria's major 'outer ports'. While the Warrnambool Breakwater is a demonstration of the engineering skills of the nineteenth century, it also demonstrates the limitations of knowledge relating to sedimentology at the time and the confidence apparent in a number of nineteenth century plans which assumed that natural forces could be overcome or contained by engineering.Plan of Warrnambool Harbour, Port of Warrnambool, dated 28 Feb 1879. Plan shows existing Breakwater and work proposed by both Warrnambool Borough Surveyor and Sir John Coode. Plan has gold coloured quarter-dowel rods top and bottom and a metal ring at the top. Stamped with title. Signed by Sir John Coode.Stamped "VICTORIAN HARBOURS / WARRNAMBOOL / PLAN / to accompany / SIR JOHN GOODE'S REPORT / DATED 28 FEB 1879" Signature "John Coode"flagstaff hill, warrnambool, maritime museum, shipwreck coast, great ocean road, sir john coode, borough of warrnambool surveyor, plan of warrnambool, victorian harbours, warrnambool harbour, warrnambool breakwater, port of warrnambool, vhd vhr h2024, flagstaff hill maritime museum & village, maritime village, map, chart, plan, lady bay, breakwater, jetty, pier, vhr h2024, proposed works, 1879

Poem entitled Bruce Ruxton by Fred Homburg aka Barry from the Bush Bruce Carlyle Ruxton, AM, OBE (6 February 1926 – 23 December 2011) was an Australian ex-serviceman and President of the Victorian Returned and Services League from 1979 to 2002.Black metal frame with poem on cream paperPoem entitled Bruce Ruxton bruce ruxton, poem, fred homburg

Framed certificate or presentation to Ron Scholten when he retired from Malvern depot in 2011 after 32 years of service for the tramways. Titled "Ron Scholten - This is your life", outline's Ron's tramway life as a young enthusiast, work at 332 Flinders St (the Shoe shop), TMSV, MMTB, trip to Germany for Siemens. Printed onto sheets with tram photos top or bottom, has been framed with a black cardboard trimmed for the sheets of paper. Frame from a silver finished timber frame (outside edge covered in plastic), Perspex cover, timber backing with tape around rear edges metal hanging strips, with plastic covered wire and black plastic bumpers in the lower corners.trams, tramways, certificates, presentations, malvern depot

Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, and nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together and neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.A pair of handmade, adult brown leather work boots, with brown leather laces, decorative stitching, metal eyelets and are stitched with waxed thread. The soles are covered with hob nails in a decorative pattern. They have metal caps on the heels. bootlaces, boots, footwear, clothing

Silver tray or plate - presentation for 25 years service to George Neil Alfick, pressed silver plated metal with etched centre scroll work with details of the presentation in the centre. "YARRA TRAMS PRESENTED TO George Elfick IN RECOGNITION OF 25 YEARS CONTINUOUS SERVICE TO PUBLIC TRANSPORT" Has a small "Made in Indonesia" yellow label on rear. Donated with the presentation box - a light blue fitted box with two openings, the words "Whitehill and Whitehill Resource Design whitehill.com.au Has a name label on back for person receiving presentation and the model of the tray - "WP147 Tray Gadroon 30cm" See also Reg Item 204 for another example.trams, tramways, personnel, presentations, southbank depot, 25th anniversary, yarra trams, silverware

Used by the MMTB Supply Department for photograpy. Based on the wikipedia reference and the markings on top of the front face of the camera, made prior to the Second World War. Camera takes 120 film.Demonstrates the type of equipment the MMTB used to record their work, problems and to illustrate reports etc.Camera - metal frame, twin lenses folding view finder within a leather caseMarked "Melbourne Tramways Australia" on the top of the leather cover, and the full name of the MMTB , Melbourne Australia on one side of the camera.mmtb, camera, photography

Stamped metal uniform badge for MMTB Depot starters. Tramways Board logo at top of badge in silver finish, the words "DEPOT STARTER" and the scroll outline in brass or gold colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "RG LUKE MELB" stamped into . Two metal rings were soldiered onto the rear of the badge, but have been removed.trams, tramways, badges, depot starter, mmtb