Showing 8639 items
matching ashton-wood
-
Tennis Australia
Racquet, Circa 1910
Wood tennis racquet branded 'The Match' by Geo. Bussey & Co. Wood frame, bare grooved wood handle. Tape and string whipping around shoulders. Gut strings. Head slightly warped. Materials: Metal, Wood, Guttennis -
Flagstaff Hill Maritime Museum and Village
Accessory - Walking Stick, William Dale, early 1900's
In the words of the Donor, Betty Stone, "This walking stick was made by William Dale from wood obtained from his property Bluestone Quarries situated at Wangoom, Warrnambool. William Dale, the son of William Booth and Hannah (nee Broadbent) Dale was born on 8 July 1828 in Saddleworth, Yorkshire, England. He emigrated to Australia in 1852 and seven years later purchased twenty acres of land in the shire of Wangoom, Warrnambool where he operated a quarry known as The Dale Bluestone Quarries. According to family legend, when William and his wife Elizabeth (nee Chamberlain) first moved into their bluestone cottage on the property, it was surrounded by dense bush that abounded with wildlife. William Dale used this walking stick in his later years. Although physically bent after years of toil, his grandchildren remembered him wheeling his barrow and walking with his stick around the quarries when aged well over eighty years. William Dale died at his residence on 14 December 1913 aged 85 years." (Note: For additional information please refer to Betty Stone’s book “Pioneers and Places - A History of three Warrnambool Pioneering Families” ie. Chamberlain, Dale and Lees Families) This item is associated with the families of Chamberlain, Dale and Lees. These families are listed in the "Pioneers' Register" for Warrnambool Township and Shire, 1835-1900, published by A.I.G.S. Warrnambool Branch. The handmade walking stick was made from local resources.Walking Stick, polished wood with grain and knots showing. Brass tip, 'J' shaped handle. Made by William Dale in the early 1900's of wood from his property, "Dale Bluestone Quarries", Wangoom, Warrnambool. From the 'Chamberlain Dale and Lees Collection'.flagstaff hill, warrnaflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, chamberlain, dale, lees, stone, betty stone, warrnambool pioneers, mbool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, dale bluestone quarries, william dale, walking aid, walking stick, mobility aid -
Gippsland Vehicle Collection
Radiator Cap, Early 20th century
Radiator cap from a 1914 Wolseley owned by Maffra architect Steven Ashton and featured in a photo of Maffra Post Office and Court House, just prior to the Great War, held by the East Gippsland Historical Society.Solid brass, screw-on radiator cap with Vauxhall Griffion emblem attached. Griffion missing end of left front leg.Inscribed "REG No 729889" under leading edge and "JOSEPH FRAY LTD, BIRMINGHAM" under trailing edge. 1914, maffra, ashton, wolseley, vauxhall, steven -
Bendigo Historical Society Inc.
Photograph - BERT GRAHAM COLLECTION: GROUP PHOTO, 1956-57
Black & white photograph, Bert Graham Collection, a group of young and younger women from the Bendigo East Swimming Club (Possibly), at the back are; Glanda Ashton, /, Mrs. Masters, Mrs. Castles, ?, ?, Mrs. Nelson, and at the front are; Mrs.Ashton, Mrs. Moore, Mrs. Graham,, Mrs. Charles, ?, ?,. They are mentioned on the back as well as 56-57 Graham in red ink.bendigo, clubs, bendigo east swimming club -
Flagstaff Hill Maritime Museum and Village
Functional object - Wood sample
This oak wood sample is part of the wooden barque, the Grange, built in 1840. The wood sample was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The wood sample is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The sample is historically significant as an example of the work and trade of blacksmith. The sample is also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The sample is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard. Wood sample, oak wood fixed between plates and secured by a washer and bolt. There are five layers, each decreasing in size from base to the top. The bottom is a five-sided copper plate, above it is the oak sample that is crumbling and fragile, then a half-disc metal plate, then a square metal washer, then a round metal bolt head. The metal plate has unequal sides, the longest is parallel to the strait side of the half disc. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, wood sample, wooden ship, oak timber, ship fitting -
Bendigo Military Museum
Photograph - PHOTOGRAPH WW1, FRAMED, Post WW1
Thomas William Francis No 2584. Enlisted on 7.7.1915 in 4th reinforcements 29th Batt AIF age 25 years 6 months. Embarked for Eygpt 14.3.16, embark for France 16.6.1916, reported missing 19/20.7.1916, listed as KIA 20.7.16 (Fromelles) no known grave. The photo is one of a number that originally hung in the "Gallery of Honour" foyer of the Soldiers Memorial Institute Pall Mall Bendigo now the Bendigo Military Museum. In 2008 a mass grave was found with 250 remains in. On 12.4.2013 it was announced that the remains of Thomas Francis had been identified. Francis is now buried in the new Pheasant Wood Military Cemetery. Refer Cat No 8003.Portrait photo B &W of a soldier in uniform, Great coat and peak hat re T.W Francis. Photo is set in a grey background with a dark stained wood frame."Pte T.W Francis 29th Batt D Coy A.I.F, enlisted July 1915, embarked March 1916. Killed in Action July 1916". brsl, smirsl, fromelles -
Flagstaff Hill Maritime Museum and Village
Snatch Block
Snatch Block, 1 sheave wood block with hook. Wood is stained medium brown.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Block
1 sheave wood block with loop painted white. Wood plate both sidesflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Port Melbourne Historical & Preservation Society
Photograph - Guests, wedding of Violet Wood, 1946
Photograph of guests at wedding of Violet Wood, featuring 6 of the 11 Wood children, 1946.families, henry wood, laurie wood, lionel wood, alf wood, maurie wood, bill wood, ernie wood, les wood, des wood, vic johnson, frank king, leo doige, jim mcintosh, jim king, ron robinson -
Tennis Australia
Racquet, Circa 1965
Dunlop 'Marty Riessen' wood tennis racquet. Materials: Metal, Wood, Leather, Vinyltennis -
Bendigo Military Museum
Literary work - STORY BOARD - FRAMED - WW1, Bendigo District RSL Sub - Branch Inc. et al, c2008/09
Refer Cat No. 1280. "JACK GRINTON No. 1038". 38th Battalion - refer Cat No. 1280 for his service history.Story Board - framed. Story board - black print on white and pale blue background on synthetic paper adhered to backing board. Illustrated - four black and white photographs. Frame - metal with wood backing board."A Camera on the Somme". "Portraiture and Remembrance", Photographs - Top left - "Jack Grinton, France 1918 - 19" Top Right - "Australian soldiers and French civilians 1918-19". Middle Right "Field grave of Lance Corporal Risbey (38th Battalion) killed in action 29 September 1918, France 1919". Bottom right - "Vaire Wood field cemetery, France 1919"framed accessories, camera on the somme, ww1, 38th bn, grinton, risbey -
Whitehorse Historical Society Inc.
Leisure object - Lotts Tudor Blocks 4, 1920s
The Tudor Blocks sets included new blocks that were interchangeable with the other Lott's bricks, but had with one profiled surface with a single colour of paint on the raised surface, which gave the appearance of the panels of a wood-framed Tudor building, or of leaded windowsLarge cardboard box containing many blocks & four "trees". A book of illustrations of models. The Tudor Blocks sets included new blocks that were interchangeable with the other Lott's bricks, but had with one profiled surface with a single colour of paint on the raised surface, which gave the appearance of the panels of a wood-framed Tudor building, or of leaded windows.Lott's Tudor Blocks new series illustrations of models. Boxes 1-6, price1/6, Lotts Bricks Ltd, Watford England. Note: Price 1/6 means one pound 6 shillingstoys, lotts tudor blocks, building blocks -
Coal Creek Community Park & Museum
Desk
8670.1 - Wood table/desk with two draws either side. 8670.2 - Wood draw with curved wooden handle. 8670.3 - Wood draw with curved wooden handle. -
Tennis Australia
Racquet, Circa 1890
Wood tennis racquet branded Buckley & Nunn Melbourne. bare wood handle. Convex throat piece. Small oval head. Materials: Metal, Wood, Leathertennis -
Tennis Australia
Racquet, Circa 1890
Wood tennis racquet branded Buckley & Nunn Melbourne. bare wood handle. Convex throat piece. Small oval head. Materials: Metal, Wood, Leathertennis -
Melbourne Tram Museum
Ephemera - Ticket/s, Australian Electric Traction Association (AETA), "Fifty Questions and Answers about trams in Australia", 1947
Set of two tickets for an Australian Electric Traction Association tram tours: .1 - 40 Mile Tram Tour - 15/2/1947 - leaving Glenhuntly Depot - P. W. Duckett Secretary and L. Marshall-Wood - President. Ticket No. 33 on Manila cardboard. .2 - 30 Mile Tram Tour - 29/11/1947 - leaving Camberwell Depot - C. L. Busch - Secretary and L. Marshall-Wood President. Ticket No. 31 on Blue cardboard. On the rear of .2 is an advert for Coles and Garrard, Optometrists Bourke St.trams, tramways, aeta, tours -
Wangaratta RSL Sub Branch
Instrument - Pilot Balloon Slide Rule
The Mark II Pilot Balloon Slide Rule was made of wood laminated with heavy white plastic with a length of 24.5-in. and width of 2.5 inches. Mark II rules were manufactured in Australia by W & G (Melbourne). The W & G rule differs only slightly from the English A. G. Thornton LTD rule. The W & G rule uses serif fonts and has some fiducial marks that the English rule lacks. Exact dates of production are not known but the MK II is known to have started production by 1927. The printed scales are engraved in the plastic faces. The slide rule has 4 captive cursors (glass windows and brass guides) that ride in slots on the top and bottom edges. Each can be moved independently of one another. The cursors are missing from this item. Brass knobs at both ends of the slide facilitate its movement. The case is fabric covered wood with felt lining. No known history for this item as located in a property after purchase. The Pilot Balloon slide rule is used to convert the observed azimuth and elevation readings into wind velocity and direction records. The use of slide rules was abandoned with the wide spread adoption of computers and programs to do the calculations, as well as the decline in the use of optical pilot balloon theodolites.Made in Australia by White & Gillespie (Melb) Pty Ltd. Established in 1910, the firm was involved mainly in printing plate manufacture, but during the Second World War it manufactured a variety of navigational aids and range finding devices for the military. About 250,000 instruments were made during that period. After the war the company produced, among other items, drawing instruments and slide rules. The case is fabric covered wood with felt fabric lining containing a long black laminate ruler with numerous white markings and numbers. Top of the ruler is in three sections with the centre section movable by small gold metal knobs at either end. This slide rule contains a engraved notation on the rear face "IMPORTANT. NORMALLY NUMBER OF GRATICULE SCALE DIVISIONS PER RADIAN (K) X LENGTH OF TAIL IN FEET (I) = 12X 105. IN OTHER CASES MULTIPLY GRATICULE READINGS BY 1.2/KI BEFORE CALCULATION ON RULE" Top of Slide Rule - RAAF Ident No G268/480 Serial WG/22pilot balloon slide rule, raaf -
Kiewa Valley Historical Society
Photo Framed, Bogong School 1944, October 1944
Photo of the first 13 children enrolled at Bogong SchoolHistorical record of Bogong School life in 1944 History of Kiewa Hydro SchemeA rectangle framed sepia photo of 13 children seated outside Bogong School dated October 1944To Bogong School with best wishes from Thomas Wood taken Oct 1944bogong school photo 1944, education, school, kiewa hydro scheme -
Robin Boyd Foundation
Functional object - Rug
The Boyd's saw this type of floor covering at the Shelmerdine's house and liked it and purchased it. See also item F071.Cream wool with fringe."Woods Carpets Cleaning" 2 labels. Cleaned 11/9/96 and "1960".walsh st furnishings, robin boyd -
Flagstaff Hill Maritime Museum and Village
Block & tackle
2 sheave wood block with ring & thimble & 2 sheave wood block with hook & straps flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, 2 sheave wood block, wood block -
Tatura Irrigation & Wartime Camps Museum
Cups - Wooden, 1940's
Sent from Germany by Elfriede & Paul Faig.2 solid dark wood cups made on the small lathe (no. 2955) or wood turning bench.tatura, camp 3, lathe, faig, p, kaltenbach, g, hermann, w, handcrafts, woodwork -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Ammunition
Wood projectile dummy or wood 030M1906 RA: Remington Arms Company Inc Bridgeport Conneticutammunition, ww2, army -
Tennis Australia
Racquet, Circa 1975
A Donnay 'Bjorn' wood tennis racquet. Materials: Wood, Plastic, Adhesive tape, Leather, Nylontennis -
Tennis Australia
Button, Circa 1915
Set of 4 wood buttons each with a crossed racquet and ball motif. Materials: Wood, Inktennis -
Tennis Australia
Racquet, Circa 1920
Wright & Ditson 'George Wright' model wood tennis racquet. Materials: Metal, Wood, Leathertennis -
Flagstaff Hill Maritime Museum and Village
Tool - Moulding wood Plane, Mid to Late 19th Century
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. John Moseley & Son: Records indicate that before 1834, the firm is listed at number 16 New Street, London and according to an 1862 advertisement the shop had been established in New Street since 1730, The Sun insurance records from the time show that John Moseley was the possessor of a horse mill in the yard of his premises, which means that some kind of manufacturing was taking place, as the mill would have provided power to run a saw or perhaps a grinding wheel so the probability is that he did not just sell tools, he made them as well. John Moseley died in 1828 and his will he names his four sons: John, Thomas, William and Richard. To complicate matters he also had brothers with the same first names; brothers Richard (of Piccadilly) and William (of Peckham Rye) are named as two of the executors. Brother Thomas is not mentioned in this will, but became a minister and was one of the executors of brother Richard’s estate when he died in 1856. From John’s will, we also learn that, although the shop was in New Street, he resided in Lympstone, Devon. The family must have had a house in that county for quite some time as both sons Richard and William are baptised in Devon, although John and Thomas were baptised in London. In the 1841 and 1851 census records, we just find William in New Street, but in 1861 both William and Richard are listed there as toolmakers. That Richard was staying overnight at New Street was probably just accidental as in 1851 and 1871, we find him with his wife Jane and children in Clapham and Lambeth respectively. In 1851 Richard is listed as “assistant clerk cutlery warehouse” and in 1871 as “retired plane maker and cutler”. Although the actual place of work is not stated, one may assume he worked in the family business. 1862 is a year full of changes for the firm. In that year, William had a new property built at 27 Bedford Street. In the catalogue for the 1862 International Exhibition, 54 Broad Street (later 54-55 Broad Street) is listed for the first time, which may very well coincide with the split of the business into a retail and a wholesale branch. Around the same time, they must have moved from New Street to 17 & 18 King Street because their manufacturing premises had been pulled down to form the New Street from Cranbourne Street to King Street. In January 1865, William died and Richard continued the business. In 1867, the partnership he had with his son Walker and Thomas Elis Hooker, is dissolved. Richard continued tool making at King Street and Bedford Street. Richard retired somewhere between 1867 and 1871, but the business continued. The business is taken over by W M Marples & Sons and tools continued to be made in London until 1904 when manufacturing relocated to Sheffield. A vintage tool made by a well documented company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Wood Moulding Plane J Moseley & Son maker also stamped (Previous Owners) HIT & E Dunstan, RA Dixon with an N inside a W flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, moseley -
Glenelg Shire Council Cultural Collection
Weapon - Harpoon gun and harpoon, Harpoon, n.d
20/04/2000Wood and metal harpoon. -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Photo
Trooper A R Woodsphoto, ww1, army -
Tatura Irrigation & Wartime Camps Museum
Calipers, 1940's
Made by internee at Camp 3Wood and metal caliperscalipers, camp 3, tatura, ww2 camp 3, trades, tools -
Yarrawonga and Mulwala Pioneer Museum
Long Jointing Plane
Wood Working Tools