Excellent example of first aid 'in the field' in WW2Canvas bag with strap and leather trim; press stud fasteners. Interior has 5 small pockets and large front pocket (contents described separately-359-2 etc)labelled 'Sanax' First Aid

Hard fawn coloured cover with dotted cross lines dispersed overall. There is a blue leather binding strap & 2 eyelets on spine. Pages are black cardboard with 2 photos per page. The pages have worked loose due to no binding cord. There is white handwriting adjacent to each photo. Subjects include Jerusalem religious buildings, Tel Aviv, beach scenes, Australian soldiers on leave, Palestine farm labourers, Tiberias local people.album, photograph, religious

These goggles and helmets were issued to flying recruits for learning to fly biplanes.Leather helmet with suede lining, under chin strap, earphone inlets with snap locked flaps. Metal framed goggles with leather surrounds, adjustable rubber strap and split glass lenses.Made in England Patent. R51067 scratched into metal.

wORN BY MEMBERS OF THE 6TH Battalion Royal Melbourne Regiment Worn by an anticedent unit of the battalion Black bearskin hat made from the skin of American Black Bears,with brown leather and metal chin strap, and black leather inside cap with drawstring. 12cm tear to top of bearskin. no inscriptions or markings, white sticker with 'swan club'. bearskin hat

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Australian Army felt slouch hat with seven fold khaki puggaree. A brass clip is on the left side to allow for the brim to be pinned up. No chin strap. Brown leather sweat band on the inside.Stamped on the leather sweat band in gold lettering: 'Bardsley hats, 1991 (upwards arrow), FURFELT, 57'slouch hat, headwear, major thomas b. williams

Made of leather and placed on either side of a horse's eyes and attached either to a bridle or an independent hood. Used by farmers, carters, bullock drivers etc specially when the horse is in a team of horses.Used by farmers in the Kiewa Valley.Drag Blinkers, also known as binders or winkers. Used beside the horse's eyes so that the horse can only look forward and not be distracted by other horses in the team. Straps are leather with steel buckles.horse blinkers, horse equipment

Collar box and collar. Leather circular box with strap around body and plated buckle. Lid is attached to box. Contains 1 starched white detachable collar. Collar has markings inside.Printed inside the collar " Rexbilt" and "16½" x1¾""flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, collar, collar box, starched collar, gentleman s collar, detachable collar

Leather and steel bridle, with leather blinkers and nose strap. Blinkers are domed for extra space against head. Two leather belts to go over horses head and neck, steel chain at bottom.No visible markingsrural industry, agriculture, bridle, blinker, horse, farm, plough, leather, steel

Use to identify a tramway employee, involved in signalling duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in signalling duties.Round pressed brass badge with the words "Signalman" pressed into the centre of the badge, and around the top part "17 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, cable trams, tramway board, signalmen

Use to identify a tramway employee, involved in equipment testing duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in equipment testing duties.Round pressed brass badge with the words "Tester" pressed into the centre of the badge, and around the top part "4 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, tramway board

This is an original policeman’s helmet, known as a ‘Wolsley’. The design was in use by Victoria Police from 1877 to 1947 then replaced by more suitable caps. The helmets were made in Ballarat by the Victoria Police's official supplier, A W Sudweeks. Some of these helmets were re-sold at Stokes and Sons in Melbourne and would carry that company’s name. This Victoria Police helmet represents an early era in its uniforms, from 1877 to 1947, when the design was based on the English versions. The design was later replaced by head wear that better suited the local climate and conditions. Helmets of a similar shape to this one were worn by the local Volunteer Corps.Policeman’s helmet, Victoria Police. The black, stiffened canvas hat has a high crown and a leather chin strap. The five panels of stiffened canvas are stitched together. The helmet has a metal ventilation dome at the top. The two small holes at the front are for the officer’s identification badge. The helmet has a leather sweatband, and the brim and sweatband are lined with beige fabric. The helmet’s brim is wider at the front. A maker’s label in the shape of a shield is attached inside the helmet, which is made by A.W. Sudweeks of Ballarat. "A. W. SUDWEEKS / MANUFACTURER / BALLARAT"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, police, victoria police, police uniform, policeman's hat, helmet, policeman's helmet, wolsley, law and order, victorian government, bobby, stokes and sons, official supplier, government supplier, a w sudweeks, ballarat

This parasol belonged to Clara Johnstone Miller (nee Bell, 1866-1910). Clara was the only daughter of Mr James Bell, a councillor of the Shire of Leigh (today a part of Golden Plains Shire) and owner of Woolbrook Homestead in Teesdale, near Geelong. In 1888, Clara married prominent businessman, racehorse owner, racing identity and pastoralist Septimus Miller (1854-1925). Septimus was the sixth of seven children born to Henry 'Money' Miller and Eliza Miller (nee Mattinson). 'Money' Miller was a well known financier and politician and reputedly one of Australia's wealthiest people in his time. In 1889, Clara and Septimus moved into the house 'Cantala' in Dandenong Road, Caulfield. They had one child, Gwendoline Stewart Miller, who died in 1902 at the age of thirteen of diabetes - a largely untreatable condition at the time (insulin would not be discovered until 1921). Clara died in 1910, aged only 44. Septimus subsequently married Helen (nee Henderson), with whom he had a son, Ronald (1915-1990). The Millers were buried in the Brighton General Cemetery in a large Gothic-style vault. Upon Clara's death, Septimus sent much of her clothing and Gwendoline's to her mother Mary Bell. Some of these items were passed down to two of Clara's nieces, Miss Mary Bell and Mrs Lois Lillies, who donated them to BHS around 1973.A black silk, wood and ivory handled parasol from circa 1900. The black silk of the parasol body has been treated with a decorative hemstitch towards the lower edge. The handle and frame are made of wood, metal and either ivory or an early plastic designed to mimic ivory. The ivory section is carved with a design reminiscent of a palm tree trunk and finished with a ball. The handle also features a leather looped strap that the hand would pass through to aid holding the parasol.The handle bears an engraved inscription that appears to be 'VML' in a highly florid script. The frame bears the name 'Hartnells'.clara miller, woolbrook, septimus miller, henry 'money' miller, gwendoline miller, cantala, parasols, caulfield, brighton general cemetery

This case and its contents are believed to have been owned and used by a jockey who rode in the Orbost area. It contained a set of stirrups, two sets of spurs, and two leather jockey leggings.Horse racing as a sport and recreational activity were once part of Orbost's history.A brown leather case, rectangular in shape, a leather handle, with a metal plate on the lid, and leather loops through which straps could be threaded to surround the case. The leather has been tooled with a "crocodile" pattern.leather-case jockey's- case horse-racing

Camera Kodak No. 1A Autographic Junior. Last patent date 7/1/1913. Bellows type. Winged front door with track for lens. Leather covered body. In leather carry case with strap. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, camera kodak no. 1a, kodak camera

Leather, oval shaped hat box (in which is stored a men's silk top hat - 11400.834). Lined in blue velvet, and blue silk. Looped handle, 29cm long, attached with 2.5cm circular metal studs - possibly brass. An oval shaped insert, lined with blue velvet and silk, hold the inverted top hat. This hat was owned by John Sargood ( refer enclosed notes) whose initials are marked on trhe hat-box - J.S. - two cms high. An internal strap of black fabric, has a leather tab at one end with a metal key shaped fastener. Unfortunately the other end is broken off. This strap would hold the hat in the cavity. An outer leather strap, 4cm wide passes over the lid, and fastens at a 6.5cm diameter, circular metal disk with key lock. End of this strap is also broken - a piece of leather is inside the hat box. Strap is marked with a two cm high letter H which lines up with the owners initials when closed J.H.S..Sargood Family Notes in Clothing Box 157.costume accessories, male, leather hat box

This photograph depicts the style of MDNS uniform worn at that time, which was a grey cotton dress and red cardigan, over which was a woolen grey coat. The beret was of grey felt and had a red Maltese cross attached to the centre. Sister Wilson is about to enter her MDNS car, which was one of the early cars in the MDNS fleet, to drive to a patient to give nursing care.Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state they were sold in 1927. A Motor Auxiliary was formed in 1929 to take Sisters to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph of Sister Jill Wilson of the Melbourne District Nursing Society (MDNS) about to enter her work car. Sister Wilson is wearing her winter uniform, with a light grey beret over her short dark curled hair, and a long light grey coat which has lapels. She is standing side on, and to the left of the partially seen small white car. She is smiling and looking at the camera. Her right arm is extended with her hand on the handle of the partially opened car door and she is holding a white bag and cloth in her left hand. At her feet is her dark coloured, square shaped, nursing case which has a leather strap around the middle and two light coloured clasps each end, as well as a thick hard handle on the top. She is standing on the road and to her left, on the grass, are two lamp posts; small bushes can be seen as well as two trees in the distance. Two dark coloured buildings, one with a hip roof and one a flat roof, can be seen behind the car. rdns, motor vehicle, nurse, uniform, melbourne district nursing society, mdns, rdns transport, royal district nursing service, sister jill wilson

Possibly used as plough winkers on farms in the 19th and 20th century.A pair of vintage leather horse winkers with metal rings and side leather buckles to strap it around the horse's head and eyes. The pole and neck straps are adjustable and can be lengthened and tightened without altering the blinds. The front strap goes around the horse's muzzle. They were possibly Plough Winkers. The bit is missing.horse accessories, horse tack, horses, agriculture

Used in the Kiewa Valley to measure the height of distant points relative to a known point used in surveying and construction. The older levels consist of a telescope fitted with a spirit level and, are generally, mounted on a tripod. Modern levels are automatic.This Cowley automatic level was used in the Kiewa Valley by a Mount Beauty resident."The Cowley" Automatic Level. Automatic Level made of metal with black leather carry strap. Metal plaque with black background fixed with four nails "Cowley Automatic Level. Made in Australia". Stamped under the plaque are numbers 80950. A sticker above the plaque in red print "Warning level will not operate unless placed on tripod." A silver sticker on top of the unit "It is unnecessary to see a complete circle when finding level" it includes three diagrams to assist. Comes in the original cardboard box with instruction booklet. cowley tripod; surveying; kiewa valley

This item(razor) was used by men, only before fashion dictated that women should shave their legs and underarms. There is information that this razor was first used circa 1922 and it lasted up until circa 1958. It permitted the user to have a compact shaving apparatus at hand in any environment. It provided a safe and easy way of sharpening the more permanent blade. This type of razor replaced the straight, open, or cut-throat razors. The mobility of this item was further enhanced by Gillette with their double bladed disposable razor. Time taken(shaving) and costs involved where crucial factors in the ever growing pace of domestic lifestyle in the post 1920s.This historical item presents that, even though the Kiewa Region was an inland rural settlement which in the 1920's was not as close to "modern" fashions and "gadgets", the basic living conditions where still maintained at city levels. This particular razor was in its heyday a sophisticated safety razor and brought down the demand for the services of the "professional" barber(shaver). One of the problems of the superseded straight razor was the high levels of cuts and nicks to the face. As this particular razor was fairly expensive it would have been used by men who were in the middle to upper socio-economical position in Kiewa Valley before the late 1950'sThis item is a Sheffield steel(stamped inside) metal box(Viscount model) containing a red leather fine shaving strap and in its lid a grey honing stone. Both bottom and top lids are removable to allow for replacements of strap and stone. On the bottom lid appears "The Whetter" trade mark, registered in the U.S.A. in 1950.Three bands of a Greek key pattern has been pressed on the lid. A circled identification inscription. " ROLLS RAZOR Ltd, MADE IN ENGLAND" and patented information appears within this inscription. "Patented in England and Abroad. English patents numbers 467383. 284428. 242718. 242717" On the outside of the base lid within a circle are "ROLLS RAZOR" and the sketch of a long haired naked man (side view), crouched, with both hands stretched forward operating the razor. On a slab underneath are the words "The Whetter"safety razor, non disposable, men's shaving implement

Ladies black leather sandal with wide strap across foot and supporting leather around ankle. Leather has reptile-skin type pattern. Shoes are joined together by elastic and still have Rubi label on them Rubi 39shoes, footwear, ladies, sandals, leather

Used pre or during WW2.1. and 2. These are small size ankle gaitors, British pattern. They are made out of canvas - 2 layers. The hem at the bottom is brown leather. There are two straps and buckles to fit the gaitors on with. The canvas has been painted jungle green. ww2, uniform

The item was purchased from Robinson & Moffatt department store at Post Office Place Melbourne between 1884 when the store opened. Between 1911 and 1934 Robinson & Moffatt appeared to have sold out along with other businesses to became part of the Myer Emporium. Robinson & Moffatt were an early upmarket department store for the wealthy with a branch in Perth that was opened in 1899. During their time in business Robinson & Moffatt appear to have imported goods from England and Europe. The hatbox appears to be a British pattern made for a beaver type top hat around late 19th or early 20th century. A personal item made for Robinson and Moffatt department store, imported from England and sold to a wealthy colonial gentleman sometime between the late 19th and early 20th century. The item was purchased from one of the earliest department stores in Melbourne, that later was incorporated into what has become an iconic Australian department store operating out of one of Melbourne's iconic building locations,the Myer emporium.Gents leather oval hat Box, with concave lid reinforcing strap and leather handle. Has metal locking device and key hole. Handle held to top with 2 studs. Velvet inside lid. Catch inside box."Made for Robertson & Moffatt Melbourne"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, hat box, gentleman's hat, gent's hat box, hatbox

This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties. This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Leather Belt with 31 Badges and Buttons from WW1 attachedSee Mediaww1, world war 1, australian army, badges, button, belt, stable belt

This belt belonged to a WW1 Australian Anzac who most probably, because of the buttons and badges, served on the Western Front. Records destroyed in 1969 bush fires at Lara means we are unable to determine who owned this in the RSL. The belts is called a 'stable belt' and the one you have acquired is an early example with a leather pocket. It became common in WW1 for both, leather belts (especially that from the 1903 bandolier equipment as worn by those in the Boer War), and stable belts to be used to hold badges collected from fellow soldiers and for that reason it was often known as a 'souvenir belt'. The evolution of the stable belt: It seems that stable belts began to become popular across the Army as a whole around the turn of the 20th century, although they probably originated with the cavalry a little earlier sometime in the 1880s/1890s. All units at that time had horses on their establishment and those soldiers told off to attend them reported for Stable Parade in Stable Dress which consisted of very high waisted and pocket less breeches, or trousers, held up by braces and collarless, woollen flannel shirts with sleeves rolled up. This was to facilitate the rigorous physical effort and flexibility of movement necessary for mucking out and grooming. Braces at that time had no elastic as rubber was expensive, they were made of cotton with no 'give' whatsoever and so soldiers commonly allowed the braces to flop down from the waist so that they could bend over freely. For trousers that fitted loosely (due to the high waist) this meant that they tended to slip down and at first soldiers cinched them in with leather belts. Later on the regimental saddlers began to make belts from the same, plain canvas or wool strapping used for the horses Surcingle and utilising the same double leather strap and buckle arrangement for security (if one strap broke the other would hold and prevent the saddle from coming unseated). One particular feature of these early stable belts was a sewn on (or in) pocket, secured by a stud or clip, within which loose change could be kept, or a pocket watch, as there were no pockets in the breeches. As you might imagine these became very popular as the pocket was useful and the extra breadth afforded by the canvas strapping made them very comfortable. Around about the turn of the 20th century it began to be popular for officers to wear neckties in regimental colours both for sport and less formal, country dress. This habit probably began with the Queens Household troops and Line Cavalry, but quickly spread throughout the Army and it appears as if this use of regimental colours spread to the canvas or wool strapping used to make stable belts. For this reason the stable belts invariably followed the same colour scheme (but not always the same pattern arrangement) of regimental neck ties.This belt is an example of what Australian troops collected when on the Western Front during WW1 and when on leave.Webbing Belt with Badges and Buttons WW1See Mediaarmy, australian army, western front, aif, s.w.ellis, service number 640, 2 m.g.c., buttons, badges, belt, stable belt

A razor strop such as this one was used to sharpen and polish straight-edged razors. This particular design has a swivel hook with a locking clip that allows for movement as the strop is being used. This strop is branded "Sherlite". On May 5th, 1922 the Commonwealth officially accepted and advertised the Trade Mark Application of Thomas Sherry of Victoria, for the Trade Mark of "Sherlite" to be used under the heading of "Leather, Skins unwrought and Wrought”. Thomas Sherry’s application was to use the word “Sherlite” for detachable soles made of rubberised leather. Straight razors and cut-throat razors were the major tools for shaving before the safety razor was invented in the 1880s and even today specialist shaving shops still sell straight razors. Along with the razor, the process of shaving would commonly involve lathering up shaving soap with a shaving brush that had boar bristles. Men could own several razors and rotate them through the week and some shops sold the razors in a set, a razor for each day of the week. Straight razors could require stropping more than once during the shaving of a heavy beard, and stropping would also be performed at the end of each shave. Honing would only be performed two or three times a year, preserving the blade's edge. A lot of skill was needed to hone and strop the blades of these early razors and the methods to do so were a large part of the curriculum in Barber colleges. The razor would be sharpened on a grinding wheel then honed on sharpening stone and finally finished using a strop. Straight edge razors would usually be sold unfinished and that process would be completed by the customer. A razor strop, usually made from leather, thick canvas, or light timber, would be used to straighten and polish the straight razor for shaving. Strops could also be used to polish other blades such as knives, small metal tools, and chisels. Sometimes an abrasive polishing compound is also used to give a mirror finish. Some strops, such as this one in our Collection, are designed to be used while hanging from a nail or peg, while others are handheld. The person using the strop would draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish.Razor strop, leather, and metal. Sherlite brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has a padded, bulbous-shaped leather grip handle, the other end has a metal, swivel hook hanger. Inscriptions painted in gold on leather at the hook end.Razor strop, leather and metal. Sherlite brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has padded, bulbous shaped leather grip handle, the other end has metal, swivel hook hanger. Inscriptions printed in gold on leather at hook end.Printed gold lettering stamped “Sherlite”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shaving leather, shaving accessory, barber’s equipment, barber shop razor strop, razor strop, straight razor, razor and knife sharpener, sherlite razor strop, personal effects, toiletries, thomas sherry

This sheath knife belonging originally to German seaman Julius Gebauhr and an artifact associated with the story of the survivors of the wreck of Fiji. A three-masted iron barque Fiji had been built in Belfast, Ireland, in 1875 by Harland and Wolfe for a Liverpool based shipping company. The ship departed Hamburg on 22nd May 1891 bound for Melbourne, under the command of Captain William Vickers with a crew of 25. The ship’s manifest shows that she was loaded with a varied cargo consisting of cases of dynamite, pig iron, steel goods, various spirits, sailcloth, tobacco, coiled fencing wire, concrete, 400 German pianos and other musical instruments. On September 5th, one hundred days out from Hamburg in a squally and boisterous south-west wind, the Cape Otway light was sighted on a bearing differing from Captain Vickers' calculation of his position. At about 2:30 am, Sunday 6th September 1891 land was reported 4-5 miles off the port bow. The captain tried to put the ship on the other tack, but she would not respond. He then tried to turn her the other way but just as the manoeuvre was being completed Fiji struck rock only 274 meters from shore. The place is known as Wreck Bay, Moonlight Head. Efforts were made to lower boats but all capsized or became swamped two of the younger crewmen volunteered to swim for the shore, taking a line. One, a Russian named Daniel Carkland, drowned after the line broke. The other, 17-year-old able seaman Julius Gebauhr, a German, reached shore safely on his second attempt without a line, which he had cut loose with his sheath-knife when it becomes tangled in kelp. He rested on the beach a while then climbed the cliffs in search of help. At about 10 am on Sunday a party of land selectors including F. J. Stanmore, Leslie Dickson found Gebauer. They were on their travels back from Princetown towards Moonlight Head. Gebauer was lying in the scrub in a poor state, bleeding and dressed only in a singlet, socks, belt and his sheath-knife. His rescues gave him food and brandy and some clothing and gain information about the wreck. Some of the men took him to Rivernook, a nearby guest house owned by John Evans, where he was cared for. Stanmore and Dickson rode off to try and summon help. Messages for rescuing the rest of the crew were sent both to Port Campbell for the rocket rescue crew and to Warrnambool for the lifeboat. The S.S. Casino sailed from Portland towards the scene. After travelling the 25 miles to the scene, half of the Port Campbell rocket crew and equipment arrived and was set up on the beach below the cliffs. By this time the crew of Fiji had been clinging to the jib-boom for almost 15 hours. Mr Tregear from the Rocket Crew fired the line the light line broke and the rocket was carried away. A second line was successfully fired across the ship and made fast. The anxious sailors then attempted to come ashore along the line but, as many as five at a time, however, some were washed off. Only 14 of the 24 men who had remained on the ship made it to shore. Many onlookers on the beach took it in turns to go into the surf and drag half-drowned seamen to safety. The wreck of Fiji has smashed apart within 20 minutes of the last man being brought ashore, and it settled in about 6 m of water. Of the 26 men on Fiji, 11 in total lost their lives. The remains of 7 bodies were washed onto the beach. They were buried on the clifftop above the wreck. Captain Vickers was severely reprimanded for his mishandling of the ship and his Masters Certificate was suspended for 12 months. At the time there was a great deal of public criticism at the slow and disorganised rescue attempt to save those on board. The important canvas ‘breech buoy’ or ‘bucket chair’ and the heavy line from the Rocket Rescue was in the half of the rocket outfit that didn’t make it in time for the rescue: they had been delayed at the Gellibrand River ferry. Communications to Warrnambool were down so the call for help didn’t get through on time and the two or three boats that had been notified of the wreck failed to reach it in time. Captain Vickers presented Bill Robe who had dragged the captain out of the surf with his silver cased pocket watch, the only possession that he had left, as a token for having saved his life and the lives of some of the crew. Years later Bill passed the watch to his brother in law Gilbert Hulands as payment of a debt. Since that time it has been passed down the family to Gilbert Hulands’ grandson, John Hulands. Seaman Julius Gebauhr later gave his knife, in its hand crafted leather sheath, to F. J. Stanmore for caring for him when he came ashore. The knife handle has a personal inscription on it. A marble headstone on the 200 m high cliffs overlooking Wreck Beach, west of Moonlight Head, paying tribute to the men who lost their lives when Fiji ran aground. The scene of the wreck is marked by the anchor from the Fiji, erected by Warrnambool skin divers in 1967. Amongst the artefacts salvaged from the Fiji are china miniature animals, limbs from small china dolls, rubber balls, a glass bottle, sample of rope from the distress rocket and a candlestick holder. These items are now part of the Fiji collection at Flagstaff Hill Maritime Museum, along with this sheath knife and Captain Vickers’ pocket watch. Flagstaff Hill’s collection from the wreck of the Fiji and Julius Gebauhr knife is of historical significance at a State level because of its association with the vessel, which is on the Victorian Heritage Register (VHR S 259). The Fiji is archaeologically significant as the wreck of a typical 19th-century international sailing ship with cargo. It is educationally and recreationally significant as one of Victoria's most spectacular historic shipwreck dive sites with structural features and remains of the cargo still evident. Also the story of the heroic attempt by many to save the crew of the Fiji. The knife also represents an aspect of shipping history and fits in well with Victoria's framework of historical themes of living with natural processes as items such as these contribute to a better understanding of Victoria’s cultural history.Knife, metal with black wooden handle. Handle is riveted to knife in 3 places, with shaft of knife between the 2 parts of the handle. The handle also has a carved ring around the end, possibly for attaching a wrist strap. Knife blade is pointed in the centre of the tip and is rusty. The knife has a rectangular metal plaque on handle with inscription. The hand crafted dark brown, soft leather sheath is shaped to fit the knife and joined at the back with cross stitching. The sheath also has a leather belt strap that has come away from the sheath at one end.Metal plaque “FROM JULIUS GEBAUHR/”FIJI” /TO F.J.S.” (F J Standmore recipient)1891, shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwrecked artefact, flagstaff hill maritime village, shipwreck coast, warrnambool, knife, fiji, pocket watch, moonlight head, gebauhr, stansmore, wreck bay, sheath knife

Royal Australian Navy officer's peaked cap with a woven dark navy band and off-white piqued top in synthetic material. Patent leather peak is black with green underside. The cap has a black patent leather chin strap that runs across the top of the peak, secured on left and right with press stud buttons. Above the peak is an embroidered insignia of the Royal Australian Navy, a crown with an anchor underneath. Hat brim is stiffened by foam and bears a brown leather band with punched holes, presumably for ventilation. The interior lining is black.Interior tag at back of hat reads "59". Inscription on underside of hat peak is illegible.royal australian navy, navy, hat, cap, uniform

Wrist, electronic, watch, issued for the celebration of 100 years of electric trams in Melbourne, stainless steel case / plastic watch front, leather wrist strap within a plastic envelope with a paper information slip - two year warranty. Watch returns to City Life Aust. Pty Ltd, service centre, PO Box 515 Milton, Qld 4064. Has time only function. Made in China. 2nd copy added 16-6-2018 - completed with original packing and warranty dockets - from donation of Evan Cochrane.trams, tramways, 100 years of electric trams, yarra trams, souvenirs