Item used to hold a light bulb inside a tram roof. Made in England, with a horse shoe makers mark and that it is "Vitreous" formed into the base of the item. Recovered from tram 14 during the project to rewire the trams. New light fittings are 24V rather than 125V DC.Demonstrates an item to hold a Edison Screw lamp inside a tram.White ceramic base fitted with a brass formed Edison Screw lamp holder fitted with screw terminals and brass parts. One of the securing brass screws remains in the holder.tram 14, tramcars, lights, electric lighting, tramcar maintenance

Camp ovens were used for cooking indoors and outdoors. They were used to perform a variety of tasks and to last forever.The use of dry sand moulds for casting the iron created a smoother surface. A more even surface meant more even contact points with food. The lid is close fitting.Used by people in the Kiewa Valley including campers, drovers, shearers, bushmen, miners and groups eg.scouts to cook food.Camp ovens originally named Dutch ovens were made from cast iron, were heavy and were developed in the Netherlands in the 1700s. Australian drovers, shearers, bushmen, campers and miners used the cast iron camp ovens. This one has legs and was used outside. The lid is slightly concave enabling coals from the cooking fire to be placed on top as well as below. This provides more uniform internal heat and lets the inside act as an oven. Formerly UKV 023cast iron oven, outdoor cooking

The ship building company E. & A. Sewall, from Bath, Maine, USA, built many ships that had wheels with the same decorative, starburst pattern on them as this particular wheel segment, including the Eric the Red. The wheel was manufactured by their local Bath foundry, Geo. Moulton & Co. and sold to the Sewall yard for $100, according to the construction accounts of the vessel. Eric the Red was a wooden, three masted clipper ship. She had 1,580 tons register and was the largest full-rigged ship built at Bath, Maine, USA in 1871. She was built and registered by Arthur Sewall, later to become the partnership E. & A. Sewall, and was the 51st ship built by this company. The annually-published List of Merchant Vessels of the U.S. shows that Bath was still the home port of Eric the Red in 1880. The vessel was named after the Viking discoverer, Eric the Red, who was the first European to reach the shores of North America (in 980AD). The ship Eric the Red at first traded in coal between America and Britain, and later traded in guano nitrates from South America. In 1879 she was re-metalled and was in first class condition. On 10th June 1880 (some records say 12th June) Eric the Red departed New York for Melbourne and then Sydney. She had been commissioned by American trade representatives to carry a special cargo of 500 exhibits (1400 tons) - about a quarter to a third of America’s total exhibits - from America for the U.S.A. pavilion at Melbourne’s first International Exhibition. The exhibits included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, samples of corn and the choicest of leaf tobacco. Other general cargo included merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The Eric the Red left New York under the command of Captain Z. Allen (or some records say Captain Jacques Allen) and 24 other crew including the owner’s son third mate Ned Sewall. There were 2 saloon passengers also. On 4th September 1880 the ship had been sailing for an uneventful 85 days and the voyage was almost at its end. Eric the Red approached Cape Otway in a moderate north-west wind and hazy and overcast atmosphere. Around 1:30am Captain Allen sighted the Cape Otway light and was keeping the ship 5-6 miles offshore to stay clear of the hazardous Otway Reef. However he had badly misjudged his position. The ship hit the Otway Reef about 2 miles out to sea, south west of the Cape Otway light station. Captain Allen ordered the wheel to be put ‘hard up’ thinking that she might float off the reef. A heavy sea knocked the man away from the wheel, broke the wheel ropes and carried away the rudder. The sea swamped the lifeboats, the mizzenmast fell, with all of its rigging, then the mainmast fell and the ship broke in two. Some said that the passenger Vaughan, who was travelling for his health and not very strong, was washed overboard and never seen again. The ship started breaking up. The forward house came adrift with three of the crew on it as well as a longboat, which the men succeeded in launching and keeping afloat by continually bailing with their sea boots. The captain, the third mate (the owner’s son) and others clung to the mizzenmast in the sea. Then the owner’s son was washed away off the mast. Within 10 minutes the rest of the ship was in pieces, completely wrecked, with cargo and wreckage floating in the sea. The captain encouraged the second mate to swim with him to the deckhouse where there were other crew but the second mate wouldn’t go with him. Eventually the Captain made it to the deckhouse and the men pulled him up. At about 4:30am the group of men on the deckhouse saw the lights of a steamer and called for help. At the same time they noticed the second mate and the other man had drifted nearby, still on the spur, and pulled them both onto the wreck. The coastal steamer Dawn was returning to Warrnambool from Melbourne, its sailing time different to its usual schedule. Cries were heard coming from out of the darkness. Captain Jones sent out two life boats, and fired off rockets and blue lights to illuminate the area. They picked up the three survivors who were in the long boat from Eric the Red. Two men were picked up out of the water, one being the owner’s son who was clinging to floating kerosene boxes. At daylight the Dawn then rescued the 18 men from the floating portion of the deckhouse, which had drifted about 4 miles from where they’d struck the reef. Shortly after the rescue the deckhouse drifted onto breakers and was thrown onto rocks at Point Franklin, about 2 miles east of Cape Otway. Captain Jones had signalled to Cape Otway lighthouse the number of the Eric the Red and later signalled that there was a wreck at Otway Reef but there was no response from the lighthouse. The captain and crew of the Dawn spent several more hours searching unsuccessfully for more survivors, even going back as far as Apollo Bay. On board the Dawn the exhausted men received care and attention to their needs and wants, including much needed clothing. Captain Allen was amongst the 23 battered and injured men who were rescued and later taken to Warrnambool for care. Warrnambool’s mayor and town clerk offered them all hospitality, the three badly injured men going to the hospital and others to the Olive Branch Hotel, then on to Melbourne. Captain Allen’s leg injury prevented him from going ashore so he and three other men travelled on the Dawn to Portland. They were met by the mayor who also treated them all with great kindness. Captain Allen took the train back to Melbourne then returned to America. Those saved were Captain Z. Allen (or Jacques Allen), J. Darcy chief mate, James F. Lawrence second mate, Ned Sewall third mate and owner’s son, John French the cook, C. Nelson sail maker, Clarence W. New passenger, and the able seamen Dickenson, J. Black, Denis White, C. Herbert, C. Thompson, A. Brooks, D. Wilson, J. Ellis, Q. Thompson, C. Newman, W. Paul, J. Davis, M. Horenleng, J. Ogduff, T. W. Drew, R. Richardson. Four men had lost their lives; three of them were crew (Gus Dahlgreen ship’s carpenter, H. Ackman steward, who drowned in his cabin, and George Silver seaman) and one a passenger (J. B. Vaughan). The body of one of them had been found washed up at Cape Otway and was later buried in the lighthouse cemetery; another body was seen on an inaccessible ledge. Twelve months later the second mate James F. Lawrence, from Nova Scotia, passed away in the Warrnambool district; an obituary was displayed in the local paper. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts and bravery, being thanked and presented with substantial monetary rewards, medals and gifts. Neither the ship, nor its cargo, was insured. The ship was worth about £15,000 and the cargo was reportedly worth £40,000; only about £2,000 worth had been recovered. Cargo and wreckage washed up at Apollo Bay, Peterborough, Port Campbell, Western Port and according to some reports, even as far away as the beaches of New Zealand. The day after the wreck the government steam ship Pharos was sent from Queenscliff to clear the shipping lanes of debris that could be a danger to ships. The large midship deckhouse of the ship was found floating in a calm sea near Henty Reef. Items such as an American chair, a ladder and a nest of boxes were all on top of the deckhouse. As it was so large and could cause danger to passing ships, Captain Payne had the deckhouse towed towards the shore just beyond Apollo Bay. Between Apollo Bay and Blanket Bay the captain and crew of Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag-board bearing the words “Eric the Red” was found on the deckhouse; finally those on board the Pharos had the name of the wrecked vessel. During this operation Pharos came across the government steamer Victoria and also a steamer S.S. Otway, both of which were picking up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated on to Point Franklin. Some of the vessels yards and portions of her masts were on shore. The pieces of canvas attached to the yards and masts confirmed that the vessel had been under sail. The beach there was piled with debris several feet high. There were many cases of Diamond Oil kerosene, labelled R. W. Cameron and Company, New York. There were also many large planks of red pine, portions of a small white boat and a large, well-used oar. Other items found ashore included sewing machines (some consigned to ‘Long and Co.”) and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire (some branded “T.S” and Co, Melbourne”), kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts, croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a fly wheel, a cooking stove, timber, boxes, pianos, organs and a ladder. (Wooden clothes pegs drifted in for many years). There seemed to be no personal luggage or clothing. The Pharos encountered a long line, about one and a half miles, of floating wreckage about 10 miles off land, south east of Cape Otway, and in some places about 40 feet wide. It seemed that more than half of it was from Eric the Red. The ship’s crew rescued 3 cases that were for the Melbourne Exhibition and other items from amongst the debris. There were also chairs, doors, musical instruments, washing boards, nests of trunks and fly catchers floating in the sea. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. (There is a photograph of a life belt on the verandah of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. This is rather a mystery as the ship was registered in Bath, Maine, USA.) Parts of the ship are on display at Bimbi Park Caravan Park and at Apollo Bay Museum. Flagstaff Hill Maritime Village also has part of the helm (steering wheel), a carved wooden sword (said to be the only remaining portion of the ship’s figurehead; further research is currently being carried out), a door, a metal rod, samples of wood and a medal for bravery. Much of the wreckage was recovered by the local residents before police and other authorities arrived at the scene. Looters went to great effort to salvage goods, being lowered down the high cliff faces to areas with little or no beach to collect items from the wreckage, their mates above watching out for dangerous waves. A Tasmanian newspaper reports on a court case in Stawell, Victoria, noting a man who was caught 2 months later selling tobacco from the wreckage of Eric the Red. Some of the silverware is still treasured by descendants of Mr Mackenzie who was given these items by officials for his help in securing the cargo. The gifts included silver coffee and tea pots, half a dozen silver serviette rings and two sewing machines. The wreck and cargo were sold to a Melbourne man who salvaged a quantity of high quality tobacco and dental and surgical instruments. Timbers from the ship were salvaged and used in the construction of houses and sheds around Apollo Bay, including a guest house, Milford House (since burnt down in bushfires), which had furniture, fittings and timber on the dining room floor from the ship. A 39.7 foot long trading ketch, the Apollo, was also built from its timbers by Mr Burgess in 1883 and subsequently used in Tasmanian waters. It was the first attempt at ship building in Apollo bay. In 1881 a red light was installed about 300 feet above sea level at the base of the Cape Otway lighthouse to warn ships when they were too close to shore; It would not be visible unless a ship came within 3 miles from it. This has proved to be an effective warning. The State Library of Victoria has a lithograph in its collection depicting the steamer Dawn and the shipwrecked men, titled. "Wreck of the ship Eric the Red, Cape Otway: rescue of the crew by the Dawn". “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA) Segment of a ship's wheel, or helm, from the wreck of the sailing ship Eric the Red. The wheel part is an arc shape from the outer rim of the wheel and is made up of three layers of timber. The centre layer is a dark, dense timber and is wider than the two outer layers, which are less dense and lighter in colour. The wheel segment has a vertically symmetrical, decorative copper plate inlaid on the front. The plate has a starburst pattern; six stars decorate it, each at a point where there is a metal fitting going through the three layers of timber to the rear side of the wheel. On the rear each of the six fittings has an individual copper star around it. The edges of the helm are rounded and bevelled, polished to a shine in a dark stain. Around each of the stars, front and back, the wood is a lighter colour, as though the metal in that area being polished frequently. The length of the segment suggests that it has probably come from a wheel or helm that had ten spokes. (Ref: F.H.M.M. 16th March 1994, 239.6.610.3.7. Artefact Reg No ER/1.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's-wheel, eric-the-red, helm, shei's wheel, ship's steering wheel

A shock of different voltages was delivered to a person using the two metal handles or two heavy soft wire combs (missing but known of) were moved across the skin. Perhaps this was an early TENS Unit. The unit came to the donor's grandfather (Roy F. Leibig - Chief Electrical Inspector of the Brunswick (Melbourne) Electric Supply) for repair and returned to his keeping once it had become obsolete (upgraded by newer machine). Donor often helped his Pa repair electrical equipment.Historical: The Resuscitator or Electric Therapy Unit was used in hospitals, possibly Mental hospitals. Provenance: The donor worked at Mt Beauty in the Kiewa Hydro Electric Scheme with the State Electric Commission of Victoria as an electrician. Black wooden smooth box with clip fastener which is screwed on - 3 screws for the base and 2 for the lid. On top of the box is a leather strap for the handle fastened by steel screwed into the box. Inside: A mask with attached strap. Tap fitting loosely into steel box. Metal cylinders and a Cardboard box. A wooden lockable case, housing electrical equipment suitable for issuing high voltage shocks.In red, middle of the side with fastener - "SPARKLETS RESUSCITATOR" Scruff marks inside the lid. A cream plastic tag is screwed on and inscribed"Manufacturers:- / SPARKLETS LIMITED / EDMONTON, LONDON, N.18 / Made in ENGLANDmedical, hospital equipment, resuscitator, tawonga district hospital, doctor

Items in collection re T. Pattison, refer Cat No 5342.4..1) Shirt, light khaki, cotton, long sleeved with patch on each sleeve of Warrant Officer insignia. .2) Tie, khaki, woollen, rib pattern. .3) Belt, black, webb, brass fittings at end. .4) & .5) Belt, brass, keeper clips. .6) & .7) Belt, brass clips. .8) .9) .10) & .11) Hooks, brass, for securing clothing to the belt.uniforms - army, accessories

This flip top pocket steel ash tray was at the beginning of the social "cleaning up" of cigarette ash and related products. This cigarette waste container was for those occasions when it was polite not to throw the cigarette ash and used up cigarettes "buts" on the ground, or if working in any rural area during a dry fire prone season, when discarding burning cigarette waste could set up a severe "bush" fire. It was also at the beginning of an intensive look at the affects of smoking upon the health of users. Later in the 1900s was a time when medical evidence supported a ground swell of the anti smoking movement which resulted in further restrictions of the use cigarette smoking in public places. Before the anti cigarette smoking revolution, it was both fashionable and manly to either roll your own cigarette or open up a packet of "tailor made's". In the rural and man's man environment the roll your own provided a visual acknowledgement that the user was "true blue" Aussie male and not a city boy. The cycle of use of cigarettes has drastically changed from when this item was first used. Today's society (post 2000) has produced a ground swell of government and non government organisations whose aim is provide a cigarette "ash" free environment and society. This is highlighted in the beginning of the 2000 millennium by a cigarette "Free" Australia campaign, and the pocket flip top personal ash tray as a practical solution for butt litter disposal.This pocket ash tray not only was used when social graces required it to, but also provided a container for any unfinished cigarettes or stogies (cheap half used cigars). In rural areas (open fresh air countryside), where time was always made available for the "smoko" (Australian rest period), at any time, especially after some hard physical work, the ability to have a self contained ashing apparatus, not to offend the gentler folk, was a pre-requisite . The rural environment, in the days of these cigarette ash containers,was one which could range from harsh and unforgiving to mild and relaxing. Smoking could be enjoyed anywhere and at any time without too much "fussing" around. This ash tray was mobile, convenient, unobtrusive and regarded by the user as being considerate to those around. It also eliminated the tell tale evidence that the "no smoking" signs had been ignored. The Kiewa Valley was like many rural ares that found it hard for smokers to come to grips with a governmental "non smoking policy" to indoor recreational and other "confined space" environments. Tin plated mild steel round container with a lid. The opening lid is spring loaded, hinged top, circular and fixed by a clasp, pop- riveted (4) onto the main housing. Opposite the hinge the lid is held closed by a small metal ball fitting tightly to the top wall of the container. The lid is opened by the use of a fingernail positioned at junction of lid to body. This edge is bevelled to allow access. personal effects, tobacco waste products, smoking accessories

Contract of sale of land dated 10th June, 1954 between Mrs H. Edgecumbe (seller) and Mrs A.L. Pye (buyer) for land part of Crown allotment thirteen AB and twenty section K described in certificate of title volume 5223 folio 518, together with all buildings and erections thereon also all linos, blinds and electric fittings and shades. Price 1900 poundsorganization, business, h.a. & s.r wilkinson real estate

Journal of the Tramway Museum Society of Victoria. Ltd., Volume 4, No. 2. October 1967, fifteen pages. Front cover (right) photo by courtesy R.W.O. Pearson. Shows Birney tram no. 217 is shown at Malvern Depot ten days before it was moved to Hawthorn Depot. A few fitting, such as destination boards, have yet to be installed. History of document: Part of 'Basil Miller Tramways Collection'.Tramway Museum Society of Vic Ltddocument

Believed to have been owned originally by Alice and Arthur Fisher who had a 16 acre property in Mullum Mullum Road, Ringwood. The house was called Greenhill and was located at the highest point, now no. 28. They had a mixed farm including an orchard of fruit and nut trees, and a dairy cow. Alice milked the cow much to the amusement of her English family, who delighted in visiting. When the property was sold the butter churn went to Red Hill on the Mornington Peninsula. Arthur Lunt, donor has memories of its use in Red Hill, where his parents had a mixed farm. That property was sold c. 1950, and the butter Churn returned to the Ringwood Croydon area where it has remained unused for the last 65 years.|The butter churn has been in Croydon and Ringwood since 1952; it is typical of manually operated equipment in use on small properties 100 years ago.Cylindrical container, brown, mounted on board with handle underneath. To one side is a wooden handle and drive gears to spin cylinder. Cylinder has tight fitting lid and makers metal label on the side; opposite side has direction arrow embossed. Mounted on wooden base. Cream was put into churn, handle turned to spin drum until butter was produced. Five parts to the Churn.SVENSKA STOCKHOLM SWEDEN CENTRIFUGA,B.DAHLIA N0:0 SLATER PATENTdomestic items, food preparation

Yields information about the materials and the methods of installing electrical domestic cables in Ballarat houses during the 1920's.Section of timber or wooden electrical conduit used in houses c1920, to contain wires for electrical lamps and fittings. Consists of a timber base (very light softwood - ??) with two slots that was nailed to a wall and after the cable installed a cover strip applied. Has one end mitred or cut at 45 degrees. See Early Electrical wiring systems in American buildings - L. D. Mitchelltrams, tramways, esco, electrical equipment, house extensions, houses, electricity

Demonstrates the use of the trams in the city area of Ballarat, late 1950's and their use.Black and white photograph of Ballarat 28 and a bogie tram at the Sturt St City stop, south side. No. 28 has the destination of Bell St. In the background are the Commonwealth Bank, Berry Anderson printers and the National Mutual building. A number of passengers are boarding the tram. Photographer unknown - see history of object. Keith Kings, The Bendigo Tramways, re the fitting of reflective tape in 1956, page 59.In the rear in pencil - "Ballarat"trams, tramways, city, sturt st, lydiard st, tram 28

Gives the design details of the device or fitting known as a trolley wire ears that holds a tramway copper trolley wire in position. Notes that the drawing was traced in 1924 from a MMTB drawing. Has details for a splicing ear, straight line ear. feeder ear and curve ear along with details for nuts and screws.Yields information about the design of four different types of trolley wire fittings and how they were fabricated for use on the two tram lines, or electric street railways operated by the Victorian Railways.Dyeline print of Victorian Railways drawing number 4057 - Ears for Tramway Overhead ConstructionHas number "7513 D.33" in black pen in bottom right hand corner.tramways, trams, overhead, victorian railways, trolley wire, engineering, electrical engineering

This book was written with the aim of assisting students attending the Fitting and Turning classes at New South Wales Technical Schools early in the 20th century. The book is inscribed with the name ‘N.F.Heazlewood’. This surname is a common one in the 20th century history of Warrnambool, in particular South Warrnambool. But no specific details have been found on N. Heazlewood. This book is mainly of interest because it is a good example of a technical school text book in the first half of the 20th century. It is also of interest as belonging to a member of a family whose name is known in Warrnambool’s history This is a hard cover book of 128 pages. The cover is dark green with a lighter green binding on the outside of the cover. There is black lettering on the front cover. There are blank pages for notes at the back of the book and some trade advertisements at the front of the book. The book has a dedication and a preface. On the first page are a stamp from a publisher and an inscription hand-printed in red ink.‘N.F.Heazlewood’ heazlewood (warrnambool), history of warrnambool

The bone from this shoe horn probably comes from the horn of a cow. It has been adapted for use in putting on tight-fitting shoes or boots. Animal horn was the original material used to make such an item – hence the name ‘shoe horn’. Today shoe horns are still used but they are usually made of plastic or metal. This item is retained as an example of a shoe horn made from animal bone, a relic of the past.This is an animal bone horn tapering to an end that has been shaped to a point to form a handle. The horn is brown and cream-coloured. The horn is chipped on the sides and slightly gouged out at the top. household items, shoehorn, shoe horn, shoespooner

We walked northwards to a new building, yes the toilets you wouldn't know it by the design. The new trustees are working miracles very fitting for a cemetery. A brief collection of reminiscences by Diana Bassett-Smith of locals who are buried at Kangaroo Ground Cemetery along with 17 photographs following a visit on 1 October 2001.Colour photograph print1983 bushfire, air vice marshall wackett, ambrose erswell, barry roach-pierson, bill pelling, billy roach-pierson, birrarung, bourchiers road, ca 13, crichton, david grant, diamond street, diana bassett-smith, donald grant, donaldson road, dorrie bourchier, duff, early settlers, elizabeth cottee, ewan cameron mp, grey house, helen kohn, isabella grant (nee stevenson), jack bourchier, james balfour, james wilson, jean stewart, jessie bull (nee haughton), jimmy cook, jocelyn, joseph stevenson, judge book village, judith furphy, kangaroo ground cemetery, kay roach-pierson, keith jocelyn, kraft foods, lacey, lloyd stuart, louise grant (nee gordon), mardi crocker, marion erswell, ned haughton, nursery, pam chevallier, passiona, peter bassett-smith, pigeon bank, rath, ricketson, robinson, ruth boyd, steven crawford baes, tintagell, tosch, vera jackson, wackett trainer, watershed jackson, willandra poultry farm, zac crocker

Typed report on the type of brake shoe fittings fitted to each tram as at 8/7/1963. The report lists each passenger tram from VR 52 to W71040, and what their status was if not in use - eg stored, sold, scrapped. The list excludes the early MMTB trams of A to V class. Works cars are not listed. Yields information about the status of the MMTB Passenger fleet in 1963 and the type of brake shoe types fitted to each.Document or report 5 foolscap sheets - carbon copytramways, tramcars, lists, scrapped trams, brakes

Hanger, William Robert B. 1907 Aust Inf Corps. VP3651 NAA file covers 1935. The jacket was probably from Hanger, William Robert.1. Dark Khaki woollen jacket. Four pockets. Darkened AMF buttons. 38Bn colour patch on shoulders. darkened Major's badge on epaulettes. Rising Sun on collars. One medal ribbon on chest - Efficiency decoration. 2. Cotton polyester short sleeve shirt. light plastic buttons with epaulettes. 3. Tie, Khaki, Polyester. 4. Belt, Sam Browne, tan leather with brass fittings.4. Belt. Written inside belt is "Donated by Capt. D.F.V. Hufer A3/92041. There was another name, it has been obliterated. Another name - Capt. W.R. Hanger VP 3651.ww2, 38 bn, passchendaele barracks trust

A razor strop is flexible strip of leather or canvas used to maintain a shaving edge on a thin blade such as a straight razor. Fine powdered jeweler's rouge or other pastes can be added as an abrasive to polish the blade. The strop may be a hanging strip or a hand-held paddle. This one is a hanging strop. Strops were quite commonly found in barber shops and homes before the invention of the safety razor, They are still used for sharpening tool blades. The person using the strop would draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish. KEEN EDGE MANUFACTURER In March 1906 Popular Mechanics magazine included an advertisement for Keen Edge Strop. The promise given by the advertiser, Eddy Mfg. Co. (206 Broadway, New York) was “Use the Keen Edge strop for 90 days and if not satisfied return to us and we will refund your money“. The advertisement was for a Combination Razor Strop, “the only strop made which requires no dressing.” Readers were invited to send for a booklet on Razor and the Face. In 1924 Popular Mechanics, published by Hearst Magazines, displayed an advertisement seeking a sales manager “… to sell [to] drug, hardware and cigar stores Keen Edge Strop Dressing, which sharpens straight razors and safety blades and removes old razor strops.” At that time the Keen Edge Mfg. Company was in Dallas, Texas. Razor strops are of historical significance, representing personal effects of men from the time period when men relied on strops to keep a sharp edge on their shaving blade. Strops were commonly owned and used until the acceptance of safety razors.Razor strop, leather and metal. Keen Edge brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has padded, bulbous shaped leather handle, the other end has metal, swivel hook hanger. Inscriptions pressed into leather at the ends of the straps. Impressed into leather "FINEST SELECTED HIDE", "KEEN EDGE", "FINISH" (black stained side), “A SHARPENER" (red stained side), “1 2 3”warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, shaving leather, shaving accessory, barber’s equipment, barber shop razor strop, razor strop, straight razor, razor and knife sharpener, keen edge razor strop

Part of the Uebergang Collection (H49). This would have been used by Ray and Joyce Uebergang as children during the 1930s.Wooden frame with two-lense metal viewer. The metal viewer is an oval shape with an etched pattern and suede-covered edge. A removable wood and metal attachment has two wire holders for the stereograph cards. There is a folding spindle-shaped wooden handle attached to the base with a metal fitting. The stereograph is housed in a black cardboard box with 'Rose Stereographs' on the lid. The double-image stereo cards are stored separately.Base: PAT'D APR 20 1897 SEP 20 uebergang, george rose, stereoscope, rose stereographs

A razor strop such as this one was used to sharpen and polish straight-edged razors. This particular design has a swivel hook with a locking clip that allows for movement as the strop is being used. This strop is branded "Sherlite". On May 5th, 1922 the Commonwealth officially accepted and advertised the Trade Mark Application of Thomas Sherry of Victoria, for the Trade Mark of "Sherlite" to be used under the heading of "Leather, Skins unwrought and Wrought”. Thomas Sherry’s application was to use the word “Sherlite” for detachable soles made of rubberised leather. Straight razors and cut-throat razors were the major tools for shaving before the safety razor was invented in the 1880s and even today specialist shaving shops still sell straight razors. Along with the razor, the process of shaving would commonly involve lathering up shaving soap with a shaving brush that had boar bristles. Men could own several razors and rotate them through the week and some shops sold the razors in a set, a razor for each day of the week. Straight razors could require stropping more than once during the shaving of a heavy beard, and stropping would also be performed at the end of each shave. Honing would only be performed two or three times a year, preserving the blade's edge. A lot of skill was needed to hone and strop the blades of these early razors and the methods to do so were a large part of the curriculum in Barber colleges. The razor would be sharpened on a grinding wheel then honed on sharpening stone and finally finished using a strop. Straight edge razors would usually be sold unfinished and that process would be completed by the customer. A razor strop, usually made from leather, thick canvas, or light timber, would be used to straighten and polish the straight razor for shaving. Strops could also be used to polish other blades such as knives, small metal tools, and chisels. Sometimes an abrasive polishing compound is also used to give a mirror finish. Some strops, such as this one in our Collection, are designed to be used while hanging from a nail or peg, while others are handheld. The person using the strop would draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish.Razor strop, leather, and metal. Sherlite brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has a padded, bulbous-shaped leather grip handle, the other end has a metal, swivel hook hanger. Inscriptions painted in gold on leather at the hook end.Razor strop, leather and metal. Sherlite brand, double straps: two straps of different grade leather joined at ends with metal fittings. Stropping faces; sharpening surface is stained red and finishing surface is stained black. One end has padded, bulbous shaped leather grip handle, the other end has metal, swivel hook hanger. Inscriptions printed in gold on leather at hook end.Printed gold lettering stamped “Sherlite”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shaving leather, shaving accessory, barber’s equipment, barber shop razor strop, razor strop, straight razor, razor and knife sharpener, sherlite razor strop, personal effects, toiletries, thomas sherry

Conditions of sale by private contract dated 1st February, 1944 between D.B. Julyan (seller) and J.E. Salter (buyer) for that fruit and confectionary business situate 175 View Street, Bendigo, together with the goodwill, stock fittings Salter Spring balance scales, all shelving and ''Westinghouse'' Frigidaire as inspected by the purchaser and everything connected with said business in the shop and which belongs to the vendor. Price 300 pounds.organization, business, h.a. & s.r wilkinson real estate

Advertising material for Stilwell's, Hargreaves Street, Bendigo. 1) four pages summer circular, Season 1937-38 items includes: garden hose, fittings and reels. Lawn mowers, blinds, outdoor furniture and fly doors. 2) Paint or perish! Advertising for various paint brands and wallpapers. 3) article from the Bendigo Advertiser January 1951 titled: the Story of Stilwell's a link with Bendigo's progress.bendigo, business, stilwell

Two black and white photographs of a Scalebuoy Unit ready to be installed on the water supply. It is a long tubular shape with ends bolted onto it. At the top it has two vertical fittings with gate valves on each one. Above the gate valves are 2 T's and another gate valve in the centre. The name Scalebuoy is along the side of the barrel. Teal and white label on the back Reg. V. Brock of Bendigo and the photo number.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, scalebuoy unit

For pumping air into petrol irons, the maker is probably Coleman. Liquid fuel irons were a great advancement from Sad Irons in the late 1800's and were used before electricity was availableBrass air pump with wooden handle. A brass tube two centimetres diameter and 14 ccentimetres long with a half centimetre diameter. A 14 centimetre long metal rod with a two and a half centimetre diameter and a three and a half centimetre long wooden handle which slides in and out of the tube. Presumably there is a fitting inside the tube on the end of the rod to push air out of the hole on the other end of the tube.K15.3coleman iron, brass air pump

Textiles. Black leather hand bag with very decorative black bakelite clasp with silver twist fastener on front flap. Inside front has zippered section,(broken). Inner section has Art deco clasp with silver fitting on centre purse section. Centre section containing a coin purse on a silver bar. Side sections have side pockets- inside linings and purse of taffeta fabric.Label on inside purse section, ''Guarenteed First Quality A CB Bag''textiles, domestic, black leather hand bag

In the early 1970s, Arthur Boyd bought and restored a large, two-storey traditional farmhouse called Il Paretaio. Situated on the crest of a hill and surrounded by fields and olive groves, it is five kilometres from the village of Palaia in the province of Pisa, Tuscany. Boyd established this farmhouse as a residency programme, (which was later managed by the Australia Council). The residency program ended in 1990. Anthony Pryor undertook an Australia Council residency at Paretaio in 1984. This work is one in a series made during his time there. This work was entered into the Shire of Eltham Art Award in 1985.Pryor is an artist of national significance. This work is an example of his series of 'boxes' made principally for his own pleasure and often swapped with artists and other friends as soon as they were finished. The 'box' series was part inspired by Japanese techniques of wooden construction. Pryor first visited Japan in 1975 and was immediately drawn to Japanese methods of working with stone and wood. Many of these boxes are based upon the principles of the Japanese Zen Buddhist monk Sengai Gibon (1750-1838). This work relates to Sengai's famous hanging scroll Circle, Triangle and Square in which the circle can be read to stand for the cosmos, the square for the individual, and the triangle for aspiration. A heavy, box-like (cube) structure created from huon pine, with bronze, brass and stone elements. Within the cube is an eastern inspired, rear lattice wall in combination with bronze domestic fittings, and symbols (cube, pyramid and circle). Metal lightning, clouds and wooden rainbow hover over an asymmetrical bronze bed floating within the cube. A chair leans and a tilting ladder reaches towards the sky. Stamped into wood: lower right 'ANTHONY PRYOR PARETAIO'huon pine, pryor, brass, bronze, stone, cube, paretaio, italy, eastern, japan, sengai gibon, symbols, zen buddhism, sculpture, personal

This item is part of the Di Reidie collection. Diane Reidie was a much loved volunteer and President of Brighton Historical Society from 1999 until 2016. Originally from New Zealand, Di and her family lived in Male Street, Brighton for many years. A vibrant and energetic person with a zest for life and a gift for bringing people together, Di was a friend to many in the Bayside community and active in local community organisations. Her tireless work as President of BHS saw her named Bayside Citizen of the Year in 2008. As a seller and collector of vintage clothing, she was passionate about fashion history; one of her many enduring contributions to BHS was her extensive work in preserving, developing and promoting the Society's costume collection. In 2018-19, Di donated more than one hundred items from her personal vintage clothing collection to the Society. The collection, which includes clothing, hats, handbags and shoes from local and international designers, is representative of Di's wide-ranging interests, colourful personality, creativity, humour and love of fashion and travel. Di purchased this 1930s dress in 1983 to wear to her sister's Registry Office wedding in William Street, Melbourne. It was the first vintage clothing item she ever purchased and was the starting point of a lifelong love of collecting, preserving and promoting historical clothing. She subsequently wore the dress to a great number of events and considered it an important piece in her wardrobe. c1930s black cotton filet net dress with white cotton embroidered flowers. The dress fastens centre front with three hook and eyes, eleven black silk covered buttons and finished with black acetate ribbon band pussy bow at the neck , is slim fitting and finishes at approximately knee length. The head of the sleeve is gathered with a small shoulder band and finishes above the elbow with a black silk band. filet net, 1930s, di reidie, vintage clothing

Black and White Photograph of L 106 soon after commissioning. Has the M&MTB on the side of the trams and four doorways as ordered by the PMTT. Prior to fitting the standard destination boxes and removing one of the doorways. Elsternwick Post Office in the background. See Keith's notes on the rear of the photograph for more information. See Reg Item 5251 for a better image from a copy negative. Printed on Kodak Paper.On rear in ink a description - see image i2 and KSK number "S-A-133"trams, tramways, pmtt, l class, new tramcars, mmtb, tram 106