Date based on other similar display panels visible in images of the Shire of Eltham display at the Eltham Community Festival, 7 November 1987. 20 x 25 cm Shire of Eltham Engineering Department Providing the resources to undertake • Survey, design, consultation • Road construction and maintenance • Bridge construction and maintenance • Street sweeping • Drain and pit cleaning • Traffic engineering installation and maintenance • Garbage collection • Tip management, land reclamation and beautification • Maintenance of community buildings • Provision of community and recreation facilitiesunidentified, display panel, eltham festival, footpaths and gutters, infrastructure, residential, roads, shire of eltham, streets, 1987

Date based on other similar display panels visible in images of the Shire of Eltham display at the Eltham Community Festival, 7 November 1987. 20 x 25 cm Shire of Eltham Engineering Department Providing the resources to undertake • Survey, design, consultation • Road construction and maintenance • Bridge construction and maintenance • Street sweeping • Drain and pit cleaning • Traffic engineering installation and maintenance • Garbage collection • Tip management, land reclamation and beautification • Maintenance of community buildings • Provision of community and recreation facilitiesunidentified, display panel, eltham festival, footpaths and gutters, infrastructure, residential, roads, shire of eltham, streets, 1987

Date based on other similar display panels visible in images of the Shire of Eltham display at the Eltham Community Festival, 7 November 1987. 20 x 25 cm Shire of Eltham Engineering Department Providing the resources to undertake • Survey, design, consultation • Road construction and maintenance • Bridge construction and maintenance • Street sweeping • Drain and pit cleaning • Traffic engineering installation and maintenance • Garbage collection • Tip management, land reclamation and beautification • Maintenance of community buildings • Provision of community and recreation facilitiesunidentified, display panel, eltham festival, footpaths and gutters, infrastructure, residential, roads, shire of eltham, streets, 1987

Amy Clayton (1874-1961) centre with her children. "My Great Grandmother Amy Clayton née Burkett who owned tearooms corner Henry Street Greensborough opposite school. Here with five of her children. Six more were to follow - eleven in all. Baby on knee is Olive who married Jack Poulter. Little girl is my Gran Ivy, the eldest girl who did many chores for her siblings. Love this photo.. all so beautifully clean and obviously dearly loved."Digital copy of black and white photographclayton family, amy ann clayton, amy ann burkett

The RDNS Sister is from Camberwell Centre and is visiting the lady in her home where she is attending to wound care needed on the lady's left foot. She has already attended to the wound care required on the ladies right foot. The Sister had used a dressing tray which, contained a bowl for lotion, the forceps and swabs which had been sterilized at Camberwell Centre. Sterile dressing material had been used to clean and dress the wound. The scissors had been sterilized before use..The Trained nurses of the Melbourne District Nursing Society (MDNS), from its inception in 1885, provided wound care to their patients, who ranged in age from the very young to the elderly. As research developed better products and dressing materials, the methods and medication applied to wounds changed. MDNS received Royal patronage in 1966 and as Royal District Nursing Service (RDNS), the Education department developed programs, such as the Leg Ulcer Management Program to provide their Sisters with methods of best quality care. They introduced RDNS Wound Care Specialists who did assessments and provided advice and support to the District nurses working in the field. The Sisters liaised with the patient’s doctors and hospitals to provide information on the progress of patient’s wounds and to receive any change of wound care from the Doctors. A black and white photograph showing a Royal District Nursing Service (RDNS), Sister looking down at the white wound dressing which is over the toes of an elderly lady's left foot. Her left hand is holding it, while her right hand is applying tape. The Sister has short, dark, curly hair and is wearing a white gown over her uniform. The lady has short, slightly curled, light grey hair and is wearing a light coloured patterned dressing gown over light coloured pyjamas. She is watching the procedure as she sits on a chair with her right hand bent up to rest near her ear. Both her legs are elevated and resting on a white surgical drape. There is also a white dressing over the toes of the lady's right foot. In the left foreground, part of a dressing tray, two forceps and a pair of scissors are seen on the sterile drape protruding from under the dressing tray..Handwritten 'Camberwell staff and patient'royal district nursing service, rdns, rdns patient care - wound dressing, rdns camberwell centre

This jacket is part of the dress uniform of a Major in the Army Reserve. Major Bernard Farley who owned this jacket wore it to official functions in the Mess dining room. He served in this capacity from 1998-2001. Bernard also served in the RAAF for a number of years.These trousers are part of the dress uniform of a Major in the Army Reserve. Major Bernard Farley, who owned the uniform, wore it to official functions in the Mess dining room. He served in this capacity from 1998-2001. Bernard also served in the RAAF for a number of years.Long black trousers with a single red stripe running down either side from the top of the waistband to the base of the legs. There are two pockets just eunderneath the waistband on either side of the trousers. The fabric frms two stiff peaks at the centre of the back of the waistband. The trousers have a black zip with a metallic clip just above and six black plastic buttons along the interior of the waistband. There is one white square label with inscriptions attached to the back/left of the interior section of the waistband. Directly underneath this is another rectangular white label of the same length however much shorter. This also has inscriptions.Inscriptions on the larger square label: Fletcher Jones / Victoria / 1998 / NSN: 8405-66-095-9737 / NAME........... / SERVICE NO............ / 70% Wool / 30% Polyester / DRY CLEAN ONLY (A) / Press on original creases. Use damp cloth. Medium to hot iron / ZT782 AR0009 Inscriptions on the smaller rectangular label: 425267283.ZT782G / 94-92-76 / 347 044 07063222 / CLOTH / AR0009 / . . 5 . D40. 5 / J10066. . W *army reserve, dress uniform, dress trousers, trousers, army uniform, uniform, bernard farley, farley, warrnambool rsl, warrnambool

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. Mrs Florence Potts invented in 1871 a detachable handle made from walnut wood with a metal latch to release the handle. These wooden handles prevented burned hands and were sold to grateful women all over the world. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.Mrs Florence Potts invented this type of detachable walnut wood handle with a meta release latch for sad irons in 1871 and it sold widely throughout the world to grateful women including those in Moorabbin Shire. The family of Ms May Curtis were early settlers in Moorabbin ShireA) A sad iron, made of cast iron , has a special handle invented in 1871 by Mrs Florence Potts of Iowa, USA. B) The detachable handle made of walnut wood to prevent burned hands, was attached to the iron by a metal latch.A) UNITED/ N0 / 50 / AUSTRALIApotts florence, iowa usa, melbourne, moorabbin, sad irons, kitchen equipmentn fireplaces, walnut wood, sewing, laundry, table ware, linen, pioneers, early settlers, washing days, craftwork

Form - duplicated - "Progress Certificate - Preston Workshops - Form R18", giving a summary of work undertaken by Preston Workshops. Has space for the Electrical Shop, Air shop, Body Shop, Truck shop, and Paint shop. Form used to advise that works car 19 had a loose tyre 2C, advised by South Melbourne Depot 3-12-1970. Tram 19W. Electrical shop cleaned and checked both controllers with dates of test, air shop - air and sand ok, and truck shop put notes in as well, not sure what they mean, though the axle is 33" by Thomson's & Co and it was fitted with GE 241 motors. Noted it was test run 21-12-70. Item was located within Reg Item 3912.trams, tramways, preston workshops, forms, tramcar trucks, axles, wheels, maintenance, advertising trams, tram 19, tram 19w

The wool was shorn from sheep of the Wyndarra and Rockbank bloodlines. A flock of 290 sheep were kept undercover at Kadinia, the property of the Appledore family from Brim in the Wimmera district of Victoria. Their record-breaking wool was produced by giving the sheep a special diet and providing each one with a UV-protective coat. Around 180 fleeces were selected for the million dollar bale. The sale of the first bale of wool measuring below 14 microns was held in the Auction Room here at the National Wool Museum. Bidding began at $600/kg and steadily increased until there were only two bidders left. The bidders represented the Japanese firm Aoki International and Loro Piana of Italy. The hammer fell at $10,300/kg, with Aoki International paying $1,194,800 for the 116kg bale. The fleece was scoured (cleaned) at the Goulburn Wool Scour, New South Wales. The degree of preparation and care taken with the task was extreme. The Scour closed production three days before and was extensively cleaned. On the day of scouring 12 tonnes of 17 micron wool was washed to condition the water, then nine bales of extra super fine wool, worth over $300,000 was washed as a trial run. Toabo Agaki Japan was employed to process the scoured wool into suit cloth. Taobo required the scoured wool to contain 0.5% residual grease, 12% moisture and a yield of 83kg. These requirements were met. The entire staff of the Scour wanted to be part of washing the best wool in the world. Without asking for payment both the night shift and afternoon shift crews assisted the day shift in the task. The bale was fed into the scour in seven minutes and fitted into three bowls, half the scour. It completely disappeared into the dryer and the last wool was fed before the first wool was out. The clean wool was hand-packed into cardboard cartons and freighted to Japan. Aoki International, based in Yokohama Japan, cut three suit lengths from the cloth, then blended the remaining wool into an exclusive line of commercially-available suits. These suits are labeled Kadinia.Wool sample from the Million Dollar Balewool sales, million dollar bale

Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped.This bottle is an example of a product manufactured by a local industry which no longer exists.A clear glass bottle which has a broken top. The bottle is seamed.Base - AGM F516 Front (written sideways) - A DROSSOU ORBOST Bottom (written around whole bottle) This bottle is the property of A Drossou Orbost M bottle drossou container soft-drink

Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped.This bottle is an example of a product manufactured by a local industry which no longer exists.A clear glass soft drink bottle with a crown seal top. The bottle is seamed.A DROSSOU ORBOST This bottle is the property of A DROSSOU ORBOST Base - AGM F 860 Mbottle container drossou

Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped.This bottle is an example of a product manufacture by a local industry no longer existing.Drossou lemonade bottle. Large bottle tinted light blue.Front - D. Drossou, Orbost Bottom G938, 647drossou bottle glass lemonade-bottle

A machine fitted with sharp blades, for mashing, crushing or liquefying food ingredients. i.e vitamizing. The jug, made of glass, steel, aluminium or plastic, contains rotor blades that engage with a bit protruding from the base containing an electric motor. When activated by the switch on the base the sharp rotor blades chop, mix , mince, pulverize the ingredients in the jug . The degree of mince depends on the time the motor is running. The jug is easily removed from the base to pour the mixed ingredients where needed and the rotors are safely and easily cleaned by rinsing under water.c1940, an electric, 'Vulcan' Vitamizer, with the original cloth covered flex and bake-lite lever switch at front of the cream bake-lite base . The jug- shaped chrome blender has a red, thick, rubber lid. Front: : Vulcan / LM1 Base ; VULCAN / TYPE LM1 / Patent Pending Design / Volts 220 Amps 8vitamizer, food preparation, cooking, vulcan pty ltd australia, moorabbin, bentleigh, cheltenham, ormond, housekeeping

Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped. This bottle is an example of a product manufacture by a local industry no longer existing.A clear glass soda syphon bottle. It has a red syphon pump.D.DROSSOU, ORBOST Soda Watersyphon-bottle drosseau

A male at a kitchen sink, tap running and starting to wash up. Next to him, closer to camera, a female has her hand over some scraped plates that sit next to a soaking saucepan. Another male approaches the sink area from the far side. Poster hang above the sink, whilst to the left of the sink are white overhead cupboards holding kitchen items and below the white bench top are dark orange cupboard doors. Between the two males, there is possibly a microwave. Below the picture are the words "Luncheon over ... the clean up begins".Digital image of three people in a kitchen arealife skills, rvib burwood school

Set of four full colour posters advising passengers on how to travel safely. Part of the Tram Coach series 1 - using strap hangers or handles - 2017 2 - holding onto poles etc - also tram cleaning and washing hands - Covid19 - 2020 3 - tram travel for visitors to Melbourne - from a far away place? - 2019 4 - offering priority seats to passengers - 2018 - 2 copies 5 - day dreaming = stop before you cross tram tracks - has an E class in Nicholson St City area - not dated.Demonstrates the methods that Yarra Trams & PTV use to advise passengers how to travel safely.Set of four A3 size colour posters passenger safety postersposters, tramways, passengers, tramcars, safety, covid-19

Document titled "Tramway Maintenance Minutes of 3rd Annual Conference March 30 and April 13, 1953" in the Bendigo and the Geelong offices. See item 9192 for Notes and Agenda for this meeting. Topics covered - cleaning of trams, tracks, track surface repairs, sleepers, car renovation, painting, flooring, notes on a Ballarat Field inspection, disinfecting blinds, electrical systems, truck maintenance, castings, maintenance costs, trolley wheels, employees duties and a summary of actions. Each item where relevant looks back at the actions from the previous conference. Has a list of attendees.Yields information and demonstrates SEC Meeting minutes about discussions between the three Provincial operators about tramcars and operations.Minutes - 50 duplicated foolscap sheets pinned with a folding clip in top left hand corner.trams, tramways, minutes, sec, geelong, ballarat, bendigo, tramcar equipment, maintenance, trackwork, overhead, painting, trolley wheels, motors, one man trams, employees

1. Shirt - light Khaki colour cotton/polyester fabric. Short sleeves, shoulder epaulettes, two front pockets with button down flap. Plastic buttons. Left sleeve - fabric patch, embroidered Rising Sun Badge "THE AUSTRALIAN ARMY". Fabric patch, embroidered 'Crossed Rifles'. Right sleeve - fabric patch, embroidered, 'Parachute Wings'. Left and right sleeves, fabric patch embroidered, Australian Coat of Arms. Warrant Officer, 1st class. White manufacturers label, back below collar. 2. Trousers, khaki colour wool/polyester fabric. Service dress style with fob pocket, two side pockets, one back pocket with concealed button down flap. Plastic buttons and metal zipper fly khaki colour polyester fabric lining waist and pocket lining. White cotton manufacturers label back pocket lining. Manufacturers information on labels - black ink print. 1. "ADA/4500297929/FEB 2006/ NSN: 8405 66 133 5954/SIZE: 39/NAME/ SERVICE NO/ 65% POLYESTER/ 35% COTTON/ MADE IN AUSTRALIA" 2. "ADA/ VIC 1996/ ^/ 8405 66 ?? 7101/ SIZE 90T/ NAME/ SERVICE NO/ 50% WOOL/ 50% POLYESTER/ DRY CLEAN ONLY/ REPRESS ON ORIGINAL/ CREASES/ USE DAMP CLOTH OR / MEDIUM TO HOT/ STEAM IRON.uniform, army, service dress

3. Sam Browne Belt issued to "V101972 LT. E. HUMPHREYS" - AR AUSTRALIA 31/8 - 1970.1. Jacket - Khaki wool/polyester fabric, Service dress style with belt, silver colour plastic buttons with shank and split pin. Buttons have raised emblem - Armoured Corps. Collar, shoulder epaulettes with silver "1AR" Metal insignia badge - 1st Armoured Regiment; four front pockets, top two with buttons and two metal press studs on flap, lower with flap. Two lapel badges, metal, Armoured Corps. Green colour polyester fabric lining with white cotton manufactureres label - inside right. 2. Belt, Khaki colour wool/polyester fabric, with brass colour metal buckle, brown plastic buttons and leather belt keepers. 3. "Sam Browne" belt, consists of waist belt and shoulder strap, brown colour leather with brass buckle, studs and keepers.1. Manufacturers information on label. Black ink print "E.W. P/LTD/SOUTH AUSTRALIA/1966/ ^/SIZE 42 LONG/ CLASS 8505/66-019-8493/ ARMY NO/ NAME/ DRY CLEAN ONLY/ REPRESS USING IRON AND DAMP/ CLOTH OR MEDIUM TO HOT/ STEAM IRON/ CREASE UPPER HALF OF LAPELS/ ONLY" Handwritten blue ink pen "V101972 LT E. HUMPHREYS/ 1-AR AUSTRALIA/ 31/8 - 1970" uniform, army, service dress, sam browne belt

This tea spoon is from the wreck of the LOCH ARD, a Loch Line ship of 1,693 tons which sailed from Gravesend, London, on 2 March 1878 with 17 passengers and a crew of 36 under Captain George Gibbs. “The intention was to discharge cargo in Melbourne, before returning to London via the Horn with wool and wheat”. Instead, on 1 June 1878, after 90 days at sea, she struck the sandstone cliffs of Mutton Bird Island on the south west coast of Victoria, and sank with the loss of 52 lives and all her cargo. The manifest of the LOCH ARD listed an array of manufactured goods and bulk metals being exported to the Colony of Victoria, with a declared value of £53,700. (202 bills of lading show an actual invoice value of £68, 456, with insurance underwriting to £30,000 of all cargo). Included in the manifest is the item of “Tin hardware & cutlery £7,530”. This teaspoon is one of 482 similar items of electro-plated cutlery from the LOCH ARD site, comprising spoons and forks of various sizes but all sharing the same general shape or design and metallic composition. 49 of these pieces display a legible makers’ mark — the initials “W” and “P” placed within a raised diamond outline, which is in turn contained within a sunken crown shape — identifying the manufacturer as William Page & Co of Birmingham. An electroplater’s makers’ marks, unlike sterling silver hallmarks, are not consistent identifiers of quality or date and place of manufacture. A similar line of five impressions was usually made to impress the consumer with an implication of industry standards, but what each one actually signified was not regulated and so they varied according to the whim of the individual foundry. In this case, the maker’s marks are often obscured by sedimentary accretion or removed by corrosion after a century of submersion in the ocean. However sufficient detail has survived to indicate that these samples of electro-plated cutlery probably originated from the same consignment in the LOCH ARD’s cargo. The following descriptions of maker’s marks are drawn from 255 tea spoons, 125 dessert spoons, and 99 table forks. These marks are clearly visible in 66 instances, while the same sequence of general outlines, or depression shapes, is discernible in another 166 examples. 1. A recessed Crown containing a raised Diamond outline and the initials “W” and “P” (the recognised trademark of William Page & Co) 2. An impressed Ellipse containing a raised, pivoted, Triangle in its lower part and bearing a Resurrection Cross on its upper section (a possible dissenting church symbol reflecting religious affiliation); OR a rounded Square impression containing a raised, ‘lazy’, letter “B” (possibly mimicking sterling silver hallmark signifying city of manufacture i.e. Birmingham) 3. An impressed rounded Square filled with a raised Maltese Cross (the base metal composite of nickel silver was also known as ‘German silver’ after its Berlin inventors in 1823) 4. A recessed Circle containing a Crab or Scarab Beetle image; OR a recessed Circle containing a rotated ‘fleur de lys’ or ‘fasces’ design 5. A depressed Diamond shape enclosing a large raised letter “R” and a small raised letter “D” (mimicking the U.K. Patent Office stamp which abbreviated the term ‘registered’ to “RD”, but also included date and class of patent) Suggested trade names for William Page & Co’s particular blend of brass plating are ‘roman silver’ or ‘silverite’. This copper alloy polishes to a lustrous gold when new, discolouring to a murky grey with greenish hue when neglected. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only seven in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The LOCH ARD shipwreck is of State significance – Victorian Heritage Register S 417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Handle and stem of a teaspoon from the wreck of the LOCH ARD. The original spoon design has a flattened fiddle-back handle, with a thin stem or shank, flared collar, and elongated bowl. The spoons metallic composition is a thin layer of brass alloy which has partially corroded back to a nickel-silver base metal. An attempt has been made to clean the rear of the incomplete spoon handle to reveal makers marks - Five are now visible: (1) Trade Mark (2) Letters EP (3) Fleur de Lys (4) Bundled Fasces (5) Letter D. Marks (2) and (5) have not been observed elsewhere in this cutlery series,but the artefact hasthe same appearance and wear in all other respects to the spoons recovered from the Loch Ardflagstaff hill maritime museum, shipwreck coast, great ocean road, loch line, loch ard, mutton bird island, loch ard gorge, electroplated cutlery, loch ard shipwreck, nickel silver, william page & co, makers marks, birmingham brass plating, william page & co, william page & co

The stereoscope was an interpretation device used to interpret aerial photography and the landscape. It was used by National Parks Victoria located at Mt Beauty to look at aerial photos so that they showed up the relief of the topography and therefore looked 3D.Used by National Parks Victoria staff located at the Mt Beauty office during the 1970's and early 1980's.Dark green wooden box with padded protection around the perimeter and on lid where 2 rectangular pieces of wood touch the stereoscope. The box is fitted with wooden dividers that fit around the stereoscope. The stereoscope is green metal with folding legs and sides attached to allow the stereoscope to sit on a surface. The instrument has 2 round glass ('mirrored viewing lens') cylinders eye distance apart, that allow light in from the side swinging doors. The amount of light is constricted by a rectangular piece of metal at the top of each leg. The box has swing clips used to close it and a metal swing handle all on the front side.The hinges are reinforced (and offer protection) by additional rubber pieces at each end. Inside the box is a brush made of bristle with a wooden handle - used for cleaning.Outside and top of box: written in black: No. 1026. On blue tape beneath: Mirror stereoscope 1026. written in black centre top of box: W10/WKA.0233. On front edge of box written in black: W10/WKA 0233. Inside box lid on silver plaque: Stereoscope Universal/ Made in / Australia / Die Casters Ltd. Victorianational parks victoria. stereoscope. aerial photographs. scientific instrument. mt beauty. 3d

B+W Photo of 8 adults in a line, 4 men + 4 Women. Seems to an advertisement for ''Monkey Brand'' Cleaning products. Women are dressed as maids with white 1/2 length aprons and white caps. The men are wearing monkey masks and dinner suits (White tie + Tails). They are holding Bleaming aluminium frying pans. Women have black knee-length dresses and white stockings. 2 have ankle strap shoes. Women have 2 paper advertisements pinned to their aprons + Holding another one, suspended from a block. Inscription: In Image:- * Advertisements 'Monkey/Brand/Won't/Wash/Clothes'. On Board:- Lower R.H. Corner 'Kalma/57&59/PallMall/Bendigo'. On Back: Lower L.H. Corner indentation- mark of photographer (?)Kalma 57 & 59 Pall Mall Bendigoorganization, business, monkey brand, see: 829

Set of 10 colour photographs / prints of Scrubber 8 in Wendouree Parade and depot track on 20/1/2002, working and testing the sprinkler bar on No. 1 end of the tram. Photos by Warren Doubleday. On Kodak paper. 1962.1 - Scrubber 8 on access track .2 - At depot junction, with 45 behind, ice cream van alongside. .3 - With sprinkler bar operating .4 - ditto .5 - ditto .6 - showing the very end of the sprinkler bar under No. 1 end, at the back of the flusher hood. .7 - showing the valve and water line for the sprinkler bar. .8 - ditto .9 - showing the watered roadway coming down into depot junction from Carlton St. .10 - Simon Green cleaning depot junction points. (Photo used in Jan. 2002 Fares Please!) On .10 only in blue ink, date "20/1/02" scrubber tram, btm, sprinkler bar, depot junction, tram 8

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, 1963, No. 324 printed by Collins Bros, pattered dark red cover with green cloth binding on cover, card covers, sewn sections with ruled sheets providing a diary for 1963, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc In the Memoranda section (page 4 and 5), list of names and addresses of track gang and notes on materials used, costs, scrubber use and hours, and length of track. Lancaster Wiseman Lakey Edwards Dowie Marks Fish Smith Bartlett (started 4/11/63) Loose contents 22/7/63 - sketch showing Webster St Crossover welding points?tram, trams, sec, ballarat, depot, trackwork, rails, scrubber tram

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, 1968, No. 324 printed by Collins Bros, dark red card covers, sewn sections with ruled sheets providing a diary for 1968, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc. Names of gang often mentioned in the diary undertaking specific jobs and when on leave. Loose contents April Cash Account sheets 1. - Envelope addressed to Mr. H. Smith - Track Foreman 2 - 3 Number SECV Daily Time Sheet - Day Shift, form FTK 4-60. 26/5/1968 - blank Statutory declaration form for sick leave from the SECV.tram, trams, sec, ballarat, depot, trackwork

Yields information about the an unusual accident with a milk cart, no horse in the view, on the Mt Pleasant line outside a milk bar.Black and White copy photograph of a newspaper photograph taken by The Courier - Bogie car after collision with horse drawn milk cart, Barkly & Gladstone Sts corner. Photo taken 28/6/1966, published 29/6/1966. Has Frampton's Milk bar in the left hand side of the photo with a Peters ad, workers recovering bottles. Note the milk in the grooves of the track. Would appear tram was inbound with destination of Gardens via Drummond St. Nth, member of the crew reversing the tram to assist in the clean up, with an inspector at the far end. Collected by Alan Bradley from the Ballarat Courier early 1980's. See Excel file "Record of Ballarat Courier Photos SEC era" (Archive Documents) for source of details.On rear stamped "Copyright, The Ballarat Courier Proprietary Limited."tramways, trams, milk cart, accidents, mt pleasant

Yields information about Ballarat No. 39 and the street scene at the corner of Sturt and Lydiard St in 1953 and Holden Motor carsBlack and white digital print from a scan of a donated negative bogie tram No. 39 in Sturt St with the intersection of Grenville Street behind. In the rear are the buildings on the south west corner of the corner - featuring Mc Nultys Dry cleaning, a milk bar and grill room next door and Paterson's in the background. Note the Holden's (FJ's ?) parked with the rear into the kerbs. Black and White print made from scan of negative. Original Negative stored with Negatives. Image rescanned from copy neg and updated 31/5/2020. See On this basis, the envelope and marking matches that of Reg Item 4158, photo of No. 40, by John Webster and assumed taken on the same day as Item 4157, 4158, 4168, 4178 - 11/4/1953. Contained within Envelope No. 31.On left hand side of the negative in ink is "EI 36".tramways, trams, sturt st, grenville st, tram 39

Set of ten colour photographs of the 1995 Begonia Festival taken by Carolyn Dean - on Kodak paper. 2004.1 - tram 38, northbound, Gardens Loop .2 - tram 26 ditto .3 - Richard Gilbert and Darren Hutchesson standing by 661 .4 - No. 26 running out - Depot Junction .5 - Peter Winspur cleaning sides of No. 26 .6 - Richard Gilbert (as Inspector) and Greg Rogers and friends at Depot junction .7 - John Phillips, Paul Mong, Alastair Reither and Clayton Giles standing in front of No. 13 .8 - No. 33 running out across Wendouree Parade, with 27 and 26 in background. .9 - Len Millar, Roy Sheedy, Travis Jeffrey standing in front of No. 26 .10 - Gavin Young walking across Wendouree Parade at Gardens Loop.On rear of all photos "March 95 C. Dean"begonia festival, btm, wendouree parade, staff, tram 26, tram 27, tram 33, tram 38, tram 13, tram 661