Showing 3212 items
matching engineers
-
Wodonga & District Historical Society Inc
Album - Hume Reservoir Australia Album - Introduction - Part 2, Department of Public Works, N.S.W, 1927
This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. (continued from previous image). have been completed, Locks Nos. 2, 4 and 6, also in South Australia, are under construction. In the description of the Hume Dam the following emendations have to be made. The total length will be 5,300 feet of which 4,258 feet will consist of an earthen embankment. The maximum depth of water conserved will be 24 feet more than originally intended with an additional allowance of 9 feet for surcharge, the total capacity will be 2,000,000 acre feet, the water surface at full supply level 44,000 acres, and provision is being made for a flood discharge of 182,000 cusecs. For handy reference, the main dimensions and figures and comparisons with other dams throughout the world are given in a tabulated statement attached. The Hume Reservoir will be the largest in the British Empire. Photographs showing the work at various stages of construction are appended. The Resident Engineer for New South Wales from the start of the work until his recent promotion to the position of Inspecting Engineer was Mr J. Keith Ross, M.A., B.Sc., A.M.Inst.C.E., who has been succeeded by Mr S.W. Jones, B.E., A.M.Inst.C.E. The Resident Engineer for Victoria is Mr A.W. Johnson, B.E. (Signed) M. Inst.C.E. Chief Engineer New South Wales Constructing Authority 27th October 1927. hume reservoir australia, river murray waters scheme -
Learmonth and District Historical Society Inc.
Photo - Rain W.A, Thornton Richards & Co, Rain WIlliam Alexander,Secreatary and Shire Engineer, 1942-43
Mr William.Alexander Rain was Secretary and Engineer for the Ballarat Shire Council for 1942-43.Original Historic Photo of Councilors 1942-43.Sepia photo, in brown mount,oval in shape, of Mr William Alexander Rain, Secretary and Engineer.Situated bottom row,second from right which forms part of collection of photos of all councilors and staff for 1942-43.Presented to Ballarat Shire Council by Councilor R.T.White,(J.P.),President 1942-43.1942, 43, rain, ballarat shire council, wa -
Tatura Irrigation & Wartime Camps Museum
Audio Tape, Alois Murr, 1981
Interview with Alois Murr, agricultural engineer, resident in Australia, interned Camp 1.Philips FS 90 audio tapetalk by alois murr, lanz tractor engineer, interned in australia, camp 1 -
Tatura Irrigation & Wartime Camps Museum
Photograph, William Rooney
William Rooney, First Secretary Engineer to the Shire of Rodney.|Rodney Shire|Taturaphotograph, people -
Flagstaff Hill Maritime Museum and Village
Machine - Diving Compressor, Siebe Gorman & Co. Ltd, 1880-1890
This compressor was part of the E.G. Ward Collection. It is connected to the diving suit and boots also in our collection. Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water-pumps, refrigeration equipment and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12 bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air and under the sea (including mine rescue, tunneling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman fortunes began to decline as an ageing Sir Robert Davis failed to invest, or change the company business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr. E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998).The compressor is a very significant item as it gives a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. Siebe & Gorman the company that made the equipment was a leading inventor, developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job during the early days of marine exploration.A single cylinder divers' pump by Siebe Gorman & Co Ltd, London, eccentric hand cranked in brass mounted mahogany case with instructions to the underside of the lid, brass covered pressure gauge and air outlet, brass makers plaque to the front, water inlet and outlet to the rear, green painted lifting rings. Machinery has some blue painted areas on the metal.Plate on the back 'WATER SUPPLY" "WATER OVERFLOW" "WATER DRAIN-IN" Pressure gauge dial "BOURDON'S PRESSURE GAUGE" STEBE GORMAN & CO. LONDON", "LBS PRESSURE" "FEET OF SALT WATER" Plate on the front " PATENT, Siebe Gorman & Co Ltd Submarine Engineers" below emblem (Lion, Crown, Horse)flagstaff hill, warrnambool, flagstaff-hill, maritime-museum, diving compressor, london, siebe gorman & co ltd, marine technology, life saving, deep sea diving, maritime museum, maritime village, manine history -
Kiewa Valley Historical Society
Ron White's Collection - 1920 - 2019
Ron White was born in 1920. He received a Diploma of Mechanical Engineering at Footscray Technical School in 1946. He started work as a laboratory assistant and after several promotions was appointed Senior Operator in 1948. In 1949, he was Engineer, Grade 1 (Hydro Areas). After further promotions he became Assistant Area Engineer, Rubicon at new Eildon Power Station and Area Engineer, Kiewa in commissioning Mt Beauty Terminal Station and West Kiewa Power Station.. By 1956, he was the Area Operations Engineer at Kiewa and four years later the Kiewa Electrical Superintendent (Operations and Maintenance) . In 1961, he was officially recognised as deputy for the General Superintendent, Kiewa. In 1966 he was appointed General Superintendent Kiewa and Kiewa became 'a branch of the Transmission Department'. In 1974, the Rubicon / Eildon Area was also under Ron's control. His title was "Principal Hydro Engineer, Hydro Division, Transmission Operations Department. He held this position until his retirement in 1985.Ron White was an important identity in his role as Principal Hydro Engineer from 1966 to 1985 after the completion of the Kiewa Hydro Electric Scheme. His long period of service involved him in the construction, operation and maintenance of the SECV's Hydro Electric Schemes and administration of related catchment areas. He had a close association with the local communities and care for the welfare of employees. He lived in Mt Beauty and was well respected in the community and beyond. He passed away on 30 September 2019, aged 99 years.A) History of Ron White's Working Life: including papers relating to "Promotion & Staff Appointment" B) Ron White's Retirement - 11th Jan. 1985: papers, cards, letters, photos, disc/plaque C) Ron White's Certificates: Diploma of Mechanical Engineering; First Aid; D) Ron White's Correspondence - miscellaneous E) Ron White's History of the 'Kiewa Scheme' from 1936- 1966. Written 1986 F) Ron White's Photo album Includes photos of him and the 2003 bushfires G) Miscellaneous Photos (not labelled) from Ron's photo album. Possibly relatives including nieces and nephews. H) Pewter Mug presented to Ron - Water Board I) Wall hanging presented to Ron - Scouts J) Ron White's Slide Ruler & Mathematical Instruments K) Collection of 7 books owned by Ron L) Starting Pistol Caps box M) Ice-cream serverF) One photo of Ron with 'Ken Connors'. One photo with 'l to r: Norm Middleton, Graham Napier, Ron White, Les Peart.' G) 2003 fires has a note re time, date and whereabouts of fires H) "Presented To / Ron White / In Appreciation For Service / To The / Kiewa Valley / Water Authority / And / Its predecessor Bodies / December 1994 I) Wall hanging: On emblem - "Lord Baden-Powell Society / The Scout Association of Australia". On Name Plate below - Ronald K. White 1989" J) mathematical Instruments have 'R. W' embossed in red on the corner of the cover M) 100 Straitline, Starting Pistol Caps N) National Ice-cream Server with stainless steel spring Size 20 ron white, hydro engineer, kiewa hydro electric scheme -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Booklet, Field Engineering & Mine Warfare Pam 8 Assault River Crossing, 1951
Soft covered booklet providing the necessary information to enable instructors of Royal Engineers and Assault Pioneers to train their men in methods of getting supporting weapons and some vehicles across water obstacles. 2 copies. One copy has amendments Nos 4 & 5WO Code No 8668. Part II Rafting and Watermanship (RE and Aslt Pnrs) 1951military engineering, river crossings -
Orbost & District Historical Society
ledger, LOAN ACCOUNT CASH BOOK SHIRE OF ORBOST, 1935-1971
This ledger was used by the Shire of Orbost from 1935-1971. The item was donated to Orbost & District Historical society from P.R.O.V. as a Place of Deposit (POD) item for safe keeping by a local history group or museum. The shire covered an area of 9,347 square kilometres and existed from 1892 until 1994 when it became part of the East Gippsland Shire Council. Orbost was at first included in the Bairnsdale Shire from 1882 and was later part of the Tambo Shire. Because of travelling distances the Croajingalong Shire was created in 1892 (name changed to Orbost Shire 17.2.1893 with James Cameron as the first Shire President. In 1994 it amalgamated to become part of East Gippsland Shire Council. This item comprises records that belonged to the local government accounting system. The Shire of Orbost Council no longer exists having been absorbed by the East Gippsland Shire Council. This is a hand-written record created before the widespread use of computer accounting records.A black, hard cover ledger with light brown leather binding. it is titled "CASh BOOK LOAN ACCOUNT, SHIRE OF ORBOST". Records are hand-written. Inside the back cover is a loose-leaf typed document titled, "Shire Engineers Report 11 Sept 1970".cash-book ledger shire-of-orbost accounting -
Federation University Historical Collection
Correspondence, W. Robinson, Correspondence on Soho Foundry Letterhead, 1898, 22/04/1898
Correspondence from W. Robinson of Soho Foundry Maryborough to the Director of the Ballarat School of Mines. The letter is on letterhead which includes details for Abraham Robinson, Engineer, iron and brass founder, boiler maker, blacksmith, etc. The correspondence related to two samples of tailings for assay.soho foundry maryborough, abraham robinson, w. robinson, assay, ballarat school of mines, engineer, brass founder, iron founder, boiler maker, blacksmith -
Bendigo Historical Society Inc.
Document - HOLLAND BROS ENGINEERS CATALOGUE
Holland Bros. Engineers, iron and brass founders, Bendigo. Catalogue for grave rails, caste iron lace work, balcony panels, spandrills, Corinthian caps, newel posts, veranda columns, crushing roller, wheels. The catalogue is made up of 27 loose pages.books, catalogues, holland bros -
Whitehorse Historical Society Inc.
Article, Mullauna remembers
Mullauna Secondary College unveiled a commemorative plaque and members of Mitcham R.S.L. planted rosemary bushes on the 75th November 11th Remembrance Day anniversary.Mullauna Secondary College unveiled a commemorative plaque and members of Mitcham R.S.L. planted rosemary bushes on the 75th November 11th Remembrance Day anniversary. A military ceremonial guard from the 10th Field Squadron, Royal Australian Engineers posted a guard throughout the ceremony. Mullauna Secondary College unveiled a commemorative plaque and members of Mitcham R.S.L. planted rosemary bushes on the 75th November 11th Remembrance Day anniversary. mullauna secondary college, royal australian engineers, armed forces -
Ballarat Heritage Services
Photograph - Colour, Plaque at The George Hotel, Ballarat
This plaque commemorates the decision in July 1892 at a meeting in the George Hotel, Ballarat of The Amalgamated Mining Managers Association of Australasia to form The Australasian Institute of Mining Engineers which was established in Adelaide in February 1893. Now know as The Australasian Institute of Mining & Metallurgy. April, 1993.ballarat, george hotel, ausimm, amalgamated mining managers association of australasia, australasian institute of mining engineers, australasian institute of mining and metallurgy -
Ballarat Heritage Services
Photograph - Colour, The George Hotel, Ballarat
This plaque commemorates the decision in July 1892 at a meeting in the George Hotel, Ballarat of The Amalgamated Mining Managers Association of Australasia to form The Australasian Institute of Mining Engineers which was established in Adelaide in February 1893. Now know as The Australasian Institute of Mining & Metallurgy. April, 1993.ballarat, george hotel, ausimm -
Ballarat Tramway Museum
Administrative record - Memorandum, State Electricity Commission of Victoria (SEC) and The Courier Ballarat, cutting from The Courier re possible closure, Aug. 1962
Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system., Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system.Memorandum to the Engineer & Manager, from the Manager Ballarat Branch: Enclosing cuttings from The Courier, 15/8, 17/8 and 18/8 (Memo dated 22/8/2020) See Reg Item 7895 and 7897 for these items. Sheet has rounded corners.trams, tramways, closure, letter to the editor, editorial -
Ballarat Tramway Museum
Administrative record - Memorandum, State Electricity Commission of Victoria (SEC) and The Courier Ballarat, cuttings from The Courier re possible closure, 9/03/1962 12:00:00 AM
Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system., Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system.Memorandums to the Engineer & Manager from the Ballarat Manager, on green paper - all with rounded corners. 1 - enclosing cuttings from The Courier, 7/3, 8/3 and 9/3 (dated 9/3/62) See Reg Item 7926 and 7927 for these items. trams, tramways, closure, letter to the editor, editorial -
Ballarat Tramway Museum
Administrative record - Memorandum, State Electricity Commission of Victoria (SECV), cuttings from The Courier re possible closure, 22/02/1962 12:00:00 AM
Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system., Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system.Memorandum to the Engineer & Manager from the Ballarat Manager, on green paper - all with rounded corners. 1 - enclosing cuttings from The Courier, 20/2, 21/2 and 22/2 (dated 22/2/62) See Reg Item 7940.1 > 7940.3 for these items. trams, tramways, closure, letter to the editor, editorial -
Ballarat Tramway Museum
Administrative record - Memorandum, State Electricity Commission of Victoria (SECV), cuttings from The Courier re possible closure, 20/02/1962 12:00:00 AM
Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system., Yields information about the method of advising SEC Management of letters to the Editor concerning the possible closure of the SEC Ballarat system.Memorandum to the Engineer & Manager from the Ballarat Manager, on green paper - all with rounded corners. 1 - enclosing cuttings from The Courier, 14, 15, 16, 17 and 19/2 (dated 20/2/62) See Reg Item 7940.1 > 7940.3 for these items. trams, tramways, closure, letter to the editor, editorial -
Ballarat Tramway Museum
Document - Letter/s, State Electricity Commission of Victoria (SECV), "Crossing Under Tramway Tracks", Aug. 1957
Yields information about the correspondence that was sent to the PMG from the SEC re the installation of services in Albert St.Carbon copy of letter back to PMG Divisional Engineer dated 30/8/1957 - authorising work to install a service under Albert St. Copy of letter typed in red ink "Copy for Works Superintendent" See Reg Item 4952 for original letter.Has initials in ink.trams, tramways, letters, sec, tram track, pmg -
Kew Historical Society Inc
Photograph - Instructional photograph No.1: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."1st - Filling forms with Concrete. Construction of Combined Concrete Cerb and Gutter"street works, kerbing, gutters, concrete, portland cement association -
Kew Historical Society Inc
Photograph - Instructional photograph No.2: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."2nd - Tamping Concrete into Approximate Contour"street works, kerbing, gutters, concrete, portland cement association -
Kew Historical Society Inc
Photograph - Instructional photograph No.3: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."3rd - Metal template for Trimming Concrete 1/2" below Finished Surface ready for Application of Mortar facing." street works, kerbing, gutters, concrete, portland cement association -
Kew Historical Society Inc
Photograph - Instructional photograph No.4: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."4th - showing the three principal filling operations - 1st Trimming base course; 2nd Mortar facing applied and Trimmed 1/8th high with wooden template; 3rd - Mortar face finished to exact contour with metal finishing trowel, having a rounded face in contact with mortar facing." street works, kerbing, gutters, concrete, portland cement association -
Kew Historical Society Inc
Photograph - Instructional photograph No.5: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."5th Detail. showing use of finishing tool on Mortar Surface" street works, kerbing, gutters, concrete, portland cement association -
Kew Historical Society Inc
Photograph - Instructional photograph No.6: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."6th - Tooling and Edging the back edge of curb. Metal dividing plates partly withdrawn" street works, kerbing, gutters, concrete, portland cement association -
Kew Historical Society Inc
Photograph - Instructional photograph No.7: Using concrete for street kerbs, Portland Cement Association, 1921
One of seven photographs produced by the Portland Cement Association in 1921 showing how concrete kerbs could be created. Portland Cement Association (PCA) was founded in 1916. From 1917, the association actively promoted the benefits of concrete for road works in Australian newspapers. In the nineteenth century in Melbourne (Vic.) 'made roads' typically had gutters and kerbing lined with bluestone.The photographs are important evidence of the availability of instructional models for the use of concrete in street works in Victoria. While the photographs date from the early 1920s, the use of concrete for kerbing did not reach its maturity until after World War 2. The photos demonstrate knowledge about and the use of concrete in street works in a major Melbourne municipality at an early period.Black and white photograph with printed instructions on the reverse showing the production of concrete kerbing on 67th Street, West Allis, Milwaukee, Wisconsin (USA). The photograph was produced by the Portland Cement Association of Chicago in 1921 and used within the Chief Engineer's Department of the City of Kew (Vic.)."7th - Brushing Surface with flat brush, wet with clean water, to remove tool marks and small surface irregularities." street works, kerbing, gutters, concrete, portland cement association -
University of Melbourne, Burnley Campus Archives
Plan, Yarra Boulevard, Burnley, c.1987
Miscellaneous collection of concept plans and printed plans relating to areas around Yarra Boulevard, Burnley. (1) 3 coloured concept plans on tracing paper. (2) 4 plans from the City of Richmond City Engineers Department Series Yarra 500/042.yarra boulevard, burnley -
Melbourne Tram Museum
Document - Report, Melbourne & Metropolitan Tramways Board (MMTB), "Staggering of Office Houses of State Public Services Effect on trams and buses", Jun. 1972
Report - Foolscap, card covers, red cloth binding, 3 pages plus graphs, tables and diagrams, titled "Staggering of Office Houses of State Public Services Effect on trams and buses" Dated June 1972 Signed D W Lees, Planning Engineer.trams, tramways, routes, passengers, planning, development, victorian government -
Bendigo Military Museum
Badge - COLLAR BADGES
These collar badges were for Officers of RAE. (Royal Australian Engineers). Ubique is translated as "Everywhere".Two WO golden collar badges with the word "UBIQUE" across bottom, mounted above is a round basket on bomb out of which is coming spreading flames. On back small hook on top and bottom.On bottom written in latin "UBIQUE"badges, rae -
Glenelg Shire Council Cultural Collection
Film - Set of 2 DVD'S - Construction of the Port of Portland 1950-1961, Portland Harbour Development, c. 2010
From slides from personal collection of Chief Engineer for the Port, Mr E.P.C. Hughes.Front: 'Power Point Presentation Portland Harbour Development Slides of the construction at Portland Harbour in the 1950's' 'Apple Keynote Presentation Portland Harbour Development Slides of the construction at Portland Harbour in the 1950's'port of portland -
Glenelg Shire Council Cultural Collection
Administrative record - Set of 2 DVD's - Portland Harbour Development 1950-1961, Portland Harbour Development, c. 2010
From slides from personal collection of Chief Engineer for the Port, Mr E.P.C. Hughes.Front: 'Power Point Presentation Portland Harbour Development Slides of the construction at Portland Harbour in the 1950's' 'Apple Keynote Presentation Portland Harbour Development Slides of the construction at Portland Harbour in the 1950's'port of portland