.1 - Book - 8 pages + grey covers, side stapled, issued by the Australian Standards Association, "Electrical Voltages and electrical frequencies for new installations ", C1 (a&b) - 1926, December 1926. .2 - Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Overhead Line wire material for telegraph and telephone purposes", C3-11-1925, November 1925. .3 - Book - 20 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Telephone cable, paper insulated lead covered", C12 - 1928, January 1928. .4 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Marking for Switchboard bus-bars and connections" C13 - 1925, December 1925 - with a pasted green label noting that the "tentative standard is now endorsed as Australian Standard without amendment" - dated Oct. 1930. .5 - Book - 32 pages + grey covers, side stapled, issued by the Australian Standards Association, Tentative Australian Standard "Dimensions and Resistances of Bare Annealed Copper Wire for Electrical Machinery and Apparatus", C 18-1926, October 1926. .6 - Book - 12 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Slate Slabs for Electrical Purposes", C19 - 1926, July 1926. .7 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Moulded Flat Top Insulation Bushes" C20-1926, October 1926. .8 - Book - 16 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Insulation dimensions and resistance of enamelled plain copper wire for instruments and apparatus" C21-1928, January 1928. .9 Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Watertight Glands for electric cables" C22-1926, September 1926. .10 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Air-break knife switches and laminated brush switches for voltages not exceeding 660Volts" - C23 - 1926, August 1926" On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

.1 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Air-break knife switches and laminated brush switches for voltages not exceeding 660Volts" - C23 - 1926, August 1926" .2 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Flame proof air break switches for Voltages Not Exceeding 600Volts", C25-1926, October 1926. .3 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Flame proof air break circuit breakers for Voltages Not Exceeding 600Volts", C26-1926, October 1926. .4 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Totally Enclosed air-break Circuit Breakers for Voltages not exceeding 660 Volts" - C27 - 1926, September 1926. .5 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Totally Enclosed air-break Switches for Voltages not exceeding 660 Volts" - C28 - 1926, December 1926. .6 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Metallic Resistance Materials for Electrical Purposes" - C29-1926, November 1926. .7 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Face Plate controllers and resistances for use therewith Electric Motors (DC and AC Slip ring)" - C31-1926 - December 1926. .8 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Contactor Controllers and Resistances for use therewith Electric Motors (DC and AC Slip ring)" - C32-1926 - December 1926. .9 Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Industrial Electric Motors and Generators with class A insulation" - C34-1927, October 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .10 - Book - 56 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Large Electric Generators and Motors - Rating permitting overloads" - C35-1927, April 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

.1 - Book - 56 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Large Electric Generators and Motors - Continuous Maximum Rating" - C36-1927, May 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .2 - Book - 48 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electrical Performance of Alternators of the Steam Driven Type" - C38-1927 - December 1927 with a green label dated September 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .3 - Book - 32 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Electricity Meters" C39-1927, August 1927. .4 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Pressboard for Electrical Purposes" - C40-1927, January 1927. .5 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Hard Drawn copper stranded circular conductors for overhead power transmission purposes" C41-1930, August 1927, with a green label dated October 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .6 - Book - 48 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "for Indicating Ammeters, Voltmeters, wattmeters, frequency and power factor meters" - C42-1927 - December 1927, with a green label dated October 1932 advised that the tentative standard has been endorsed as a Standard with amendment. .7 - Book - 32 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Instrument Transformers" - C45-1928, June 1928. .8 - Book - 28 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Liquid Starters for Electric Motors" C46-1927, December 1927. .9 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Star Delta switch starters for Electric Motors" C47-1927, December 1927. .10 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Multiple switch starters for Electric Motors" C48-1927, December 1927. On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems

Yields information about the closure of the SEC operated Ballarat tram system and the people involved.Set of two photographs of the last tram leaving the Borough of Sebastopol where the tram keys were handed over to to Cr. J. Chisholm , at the town boundary. Cr. N. Donald, Mr. L. J. Denmead (behind Lew Walker), L. Walker, Cr. Walker, Mrs. Chisholm and Mrs Donald. Photo taken 19/9/1971. For The Courier newspaper photographs of the event see Reg Item 3335.On rear is the Photography stamp - "N.L. Harvey & Son - Photographers - 131 Sturt St, Ballarat" with phone numbertrams, tramways, closure, sebastopol, last tram, city of ballaarat, borough of sebastopol, closure, tram 40

Yields information about the closure of the SEC operated Ballarat tram system and the people involved.Photograph of a pipe band piping the last tram from Sebastopol over the town boundary into the City of Ballarat with the Ford Eclipse Motors in the background. Cr. N. F. Donald, the Mayor of Sebastopol is part of the band. For The Courier newspaper photographs of the event see Reg Item 3335.On rear is the Photography stamp - "N.L. Harvey & Son - Photographers - 131 Sturt St, Ballarat" with phone numbertrams, tramways, closure, sebastopol, last tram, city of ballaarat, borough of sebastopol, closure, pipe band, tram 40

Yields information about the closure of the SEC operated Ballarat tram system and the people involved.Black and white photographs of tram 40 entering the depot area on the night of the closure of the Ballarat Tramway system - 19/9/1971 with Lew Walker at the controls. Taken by N. L. Harvey & Son. For other photographs of the event see Reg Item 1864 and 6426.On rear is the Photography stamp - "N.L. Harvey & Son - Photographers - 131 Sturt St, Ballarat" with phone numbertrams, tramways, ballarat, closure, depot, last tram, tram 40

Yields information about the closure of the SEC operated Ballarat tram system and the people involved.Black and white photographs of tram 40 entering the depot area on the night of the closure of the Ballarat Tramway system - 19/9/1971 with Lew Walker at the controls and two other trammies alongside. Taken by N. L. Harvey & Son. For other photographs of the event see Reg Item 1864 and 6426.On rear is the Photography stamp - "N.L. Harvey & Son - Photographers - 131 Sturt St, Ballarat" with phone numbertrams, tramways, ballarat, closure, depot, last tram, tram 40

Black and White print contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Photo of Geelong No. 33 on the Barwon Bridge, with the destination of Belmont. Photo by Leon Marshall Wood, 29-3-1948. Printed on Kodak Velox paper. On rear in ink "Geelong 29.3.48, Barwon Bridge". Has the L. M Wood copyright stamp on rear.trams, tramways, geelong, belmont, tram 33

Black and white photograph of tram 17 on a low loader being transported to the TMSV site at Bylands on 20/9/1971, following the closure of the SEC System. A similar photograph appears in the Oct. 1971 issue of the TMSV Running Journal.Yields information about the move of Ballarat 17 to Bylands in Sept. 1971.Black and white photograph with photographers details on the rearStamp on the rear "WELT Collection, A G Culpeffer Cooke Victoria Australia, Ref... Date Sep 1971"trams, tramways, tram 17, tmsv, transporting trams

Voting registers, or electoral rolls, are a census of those who were eligible to vote. They are valuable because a country-wide census was not taken until 1911. Early electoral rolls give an individual name, residence, status of property occupation/ownership, and the rate value of the property. Electoral rolls are arranged by electoral district and subdistrict. Name, Address, Occupation and gender for thirteen subdivisions (Bendigo, Carisbrook, Castlemaine, Eaglehawk, Elmore, Golden Square, Heathcote, Maldon, Marong, Maryborough, Raywood, Sandhurst East & Strathfieldsaye). Electoral rolls were published by each state during election years..Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo for 1952 (made up to 8th September 1952). Includes Name, Address, Occupation and gender for thirteen subdivisions (Bendigo, Carisbrook, Castlemaine, Eaglehawk, Elmore, Golden Square, Heathcote, Maldon, Marong, Maryborough, Raywood, Sandhurst East & Strathfieldsaye). Assembled and bound with string, and a red light-card cover.Stamped on cover as owned by Harold Curnow, Accountant and Auditor, Colonial mutual Building, View Street, Bendigo.electoral rolls, voting in bendigo

Voting registers, or electoral rolls, are a census of those who were eligible to vote. They are valuable because a country-wide census was not taken until 1911. Early electoral rolls give an individual name, residence, status of property occupation/ownership, and the rate value of the property. Supplementary Electoral Rolls are arranged by electoral district and subdistrict. Name, Address, Occupation and gender for thirteen subdivisions. Electoral rolls were published by each state during election years.Supplementary Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo for 1952 (made up to 16th May 1952). Includes Name, Address, Occupation and gender for thirteen subdivisions. Assembled and bound with staples, and a light green card cover and pages.Stamped on cover as owned by Harold Curnow, Accountant and Auditor, Colonial mutual Building, View Street, Bendigo.electoral rolls, voting in bendigo

Hardcover book with brown paper cover. "Getting on in the World" or, hints on success in life by William Mathews. Second edition published in London by Sampson Low, Marston, Searle & Rivington in 1876. the book has 389 pages plus a preface and an index Aileen and john Ellison Collection.Getting on in life - L.J. Ellison on front cover. A blue stamp with the name LJ Ellison on first page.etiquette, philosophy, life

Ballarat tram No. 41 at Victoria St. terminus, 26-12-1960. Tram has been painted with small white strip under drivers windows prior to putting lights on. Has large triangles on front. Showing Gardens via Sturt St. West on destination. Has Penfolds Sherry Ad.'SEC Ballarat No. 41, Victoria St. terminus, 26-12-1960' in blue ink and 'W.Jack' stamped on.tramways, trams, ballarat, victoria st., tram 41

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 7/8” Beading. Stamped with owner name ‘G. Greenwood’. Later engraved number ‘13’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

Original photograph donated to the Kew Historical Society by the City's Engineering Department before the amalgamation of Kew into the City of Boroondara in 1994.This 1955 photograph provides a fine snapshot of the work of local government engineering departments in the 1950s. They reveal they types of labour conducted, the techniques used and the equipment and machinery in the possession of the local government authority.Trees in Barry Street, Kew. Barry Street, Kew, looking south to the intersection of Stawell Street. Inscription [pencil] B1955. Stamped: "Please quote No. Gx2320 when ordering. Laurie Richards JW 1528"barry street (kew), gutters, nature strips, street trees

4 matching object set. Object 1:Tea cup, object 2: saucer, object 3:plate, object 4: milk jug. Off white china tea set with moulded ribbed pattern. Floral painted design on all items in black and deep red. All items have gold leaf trim on edges.On object 4, milk jug: Rd64638 stamped on bottom and 2339 written in gold paint also on bottom.domestic items, food & drink consumption, tea set, milk jug, cup, saucer, plate, floral design, set, matching.

Marjorie Morgan discovered some of his carvings and found nothing about the carver. She set herself the project and contacted many family members who had received a carving as a gift. She organised a family reunion so everyone could bring their carvings to one place (Surrey Gardens) and have them photographed for the book. This book traces the recorded life of John Kendrick Blogg, prominent citizen, industrial chemist, poet and woodcarver. It is liberally illustrated with photographs of some of his 300 or more carvings.This book traces the recorded life of John Kendrick Blogg, prominent citizen, industrial chemist, poet and woodcarver. It is liberally illustrated with photographs of some of his 300 or more carvings.stamp "SURREY HILLS NEIGHBOURHOOD CENTRE INC. / 157 UNION ROAD / SURREY HILLS VIC 3127"(mr) john kendrick blogg, wood-carvers, chemists, poets, (mrs) marjorie morgan

Brown hardboard cover Missing spine, loose back cover xiv ; 464 pages ; 19cm Handwritten inscription on front page '73' 'The last of the Barons' Stamp on various pages 'Kilmore Machines Institute' lord lytton, kilmore mechanics institute library.

Hardboard cover with leather spine and corners Gold inscription on spine 'Cassell's Magazine Vol 9. Mechanics Institute Kilmore' viii ; 430 pages ; 25cm ; IllusHandwritten inscription on front page '136' '050 R61' Stamp on various pages 'Kilmore Mechanics Institute'british magazine, kilmore mechanics institute library.

Faded green cloth & embossed cover, with gold writing on cover and spine 'The Australian Handbook and Almanac and Shippers' and Importers' Directory' Some damage to the spine xx ; 218 pages ; 22 cm ; IlluHandwritten inscription on page 3'188' 'Kilmore Mechanics Institute' Stamp on multiple pages 'Kilmore Mechanics Institute'directory, 1876, shippers' and importers', kilmore mechanics institute library.

The History of the Decline and Fall of the Roman Empire with variorum [sic] notes, including those of Guizot, Wenck, Schreiter, & Hugo. Edited, with further illustrations from the most recent sources, by an English Churchman.Brown speckled black cloth-covered hardcover book. Spine torn, wear on spine edges. Moderate foxing throughout. 534 pp. Fair condition.Inside front cover, 'No.(32) Kilmore Mechanics Institute'. Kilmore Mechanics Institute stamp on opposite page.gibbon's rome, kilmore mechanics institute library.

Wedding gift to Mrs. and Mrs. Wandin Sebire in 1905. From their home in Sebire Avenue Wandin.An antique black painted cast iron treadle sewing machine with gold decoration on the front and mounted on a wooden base with one small drawer on each side and a foot operated treadle below. It has a wooden detachable cover. There are two cotton reels included.Plate reads "Deutsche Nahmaschinen Fabrik. Vormals. Jos. Werthheim : Frankfurt a/m".Stamped Hugo Werthheim.sewing machines, cabinet sewing machines, machines, sewing equipment

A photo of Legatee Stan Savige at a microphone. The function or event is unknown. There are two Australian flags in the background. Legatee Stan Savige was the founder of Legacy and many items in the archive record his life.Black and white photo of Legatee Stan Savige at a microphone.Stamped on the reverse '___ Branch / GPO Melbourne / Photograph / Neg No. P119/1 / Draught__s section' in purple ink.savige, event, stan savige, founding legatee

A class photo of a group of young legatees at a gymnastics class in Auburn. There are 31 boys, of various ages, in gymnastics gear and 5 men who could be the instructors and Legacy members. Legacy clubs ran classes for junior legatees for many years. It was part of providing for the children of their deceased comrades. The skills they learned were show cased in an annual demonstration usually at the Melbourne Town Hall. It appears to be photo taken professionally, as there are several photos of different classes (see 00862 - 00867) perhaps to record Legacy classes for promotion purposes. The photo featured in the September 1953 Newsletter.A record of a way Legacy provided classes for junior legatees.Black and white photo of Legacy boys posing for a class photo.Printed on the back 'Auburn'. Stamped 'S5324/1--' and '531' in blue ink. Handwritten 'Same size' in pencil.junior legatee, boys' classes

A photo of a group of female junior legatees in sporting outfits. There are 20 girls of various ages, and 1 lady who could be the instructor. Legacy clubs ran classes for junior legatees for many years such as gymnastics, swimming or dancing classes. It was part of providing for the children of their deceased comrades. The skills they learned were show cased in an annual demonstration usually at the Melbourne Town Hall. It appears to be photo taken professionally, as there are several photos of different classes (see 00862 - 00873) perhaps to record Legacy classes for promotion purposes. A note with the photo identifies two young ladies; "Kneeling at the front Michelle and Anne O'Connor. Date is estimated as the 1960s as they joined classes in 1962.A record of a way Legacy provided classes for junior legatees.Black and white photo of girls and young ladies in sports outfits with the Legacy logo.Stamped on the back Copyright, Herald and Weekly Times in grey ink. Handwritten 'Legacy P2' in blue penjunior legatee, girls' classes

A photo of Barbara Leach, volunteering with a badge tray, and a bag piper in the centre of St Kilda Road. The slogan says "Please buy a badge". It appears to have been professionally taken to publicise Legacy Week in the newspapers. The photo appeared on the front page of the Herald Sun on 6 September 1991. The accompanying articles says that police piper Constable Ross Bates played outside Legacy House to pipe in Legacy Day, which saw hundreds of collectors spread across Melbourne for the badge appeal. The appeal was aiming to reach $500000 to beat the previous year's total of $467,702. The reference number 910906/9 could mean the date was the 6th September 1991. The picture is attributed to George Salpigtidis.A record of promoting Legacy in Badge Week.Black and white photo of a bag piper and a lady collecting for the Legacy Appeal.Stamped with copyright of Herald and Weekly Times in green ink. Hand written 910906/9 on blue pen.fundraising, legacy appeal, legacy week, badge week

Rose Series postcard No. P 3032, titled "Collins Street (The Block) Melbourne Vic.", looking west from near Swanston Street. Has W2 class tram No 522 (City) and part of W class No. 267 in the view. Several cars are waiting to do a hook turn. The Australian Provincial Assurance (APA) Association Ltd tower is in the final stages of construction; completed in 1929. Yields information about Collins Street from Swanston Street 1929cPostcard - printed real photograph with Rose Stereograph Co. name on the rear. UsedHas a letter to "Aunty" from Carolyn in Albury, undated. Has the Ken Magor stamp on the top edge.trams, tramways, tram 522, tram 267, collins st, w class, w2 class

The “Hulse Company” made leather belts in Australia..1) GREEN ENAMEL WATER BOTTLE. THE CAP IS A STEEL ONE WITH A "BAYONET" LUG. A SMALL STEEL CHAIN HOLDS CAP TO BOTTLE. THIS IS SMALLER THAN STANDARD BRITISH PATTERN. .2) CARRIER LEATHER WITH STRAP. THE STRAPS AROUND BOTTLE ARE 25MM WIDTH. THE SHOULDER STRAP IS 50 MM WIDE. LEATHER IS BROWN. THE 50 MM STRAP HAS A BRASS ADJUSTING BUCKLE.The Broad belt has several: “Holden (?) (FRE) 1913”. The name "HULSE" is stamped twice on the belt strap.equipment, water bottle, army, passchendaele barracks trust

1.& 2, Gaitors, webbing. Stained green - two straps - leather. Two brass buckles, old WW2 British pattern. 3. Belt, webbing. Stained green. Size large. Brass Buckles.1. & 2. Inside is stamped “A. Chaloner” (plus faint written as well). 3. “CGCF ^ (1953)”Large.post ww2, cmf, passchendaele barracks trust