Showing 16158 items
matching metals.
-
Mont De Lancey
Berry Barrel
Small round wooden berry barrel. Metal bands and metal handles.barrels -
Mont De Lancey
Lamp, H. Miller & Co, Early 1900's
Metal 'Miller Monarch' lamp with glass globe and metal connection to bike.bicycle lamps -
Warrnambool and District Historical Society Inc.
Stencils x 3
Stencils were used to mark produce before it went to markets and/or in transit. Produce such as bales of wool, dairy and fresh produce were so marked and the account credited to the relevant producer. The origins and provenance of the stencils is not known at this time.These stencils have no known provenance but have interpretive interest and significance..1 Oval metal stencil with the number 373 cut out of the metal and with WTC engraved above it. Circular hole in the metal on the left side. .2 Circular metal with 549 cut out of metal and S of W engraved above. One large circle and two smaller circles also cut out of the metal. .3 Oval metal stencil with the numbers 199 cut out of metal and TCW engraved above it. Circular hole has been cut out on the left..1 WTC Old catalogue number on rear 437 .2 S of W Old catalogue number on rear 442 .3 TCW. Old catalogue number on rear.433warrnambool, metal stencils, farm stencils -
Warrnambool and District Historical Society Inc.
Office Equipment, Stamp holder, Mid 20th century
This item would have been used in an office or business for holding stamps of various kinds. It would have been particularly useful in a legal business or a Government Department such as a Post Office where several different kinds of stamps and seals were needed. Stamps are still used in some business and office circles and an object such as this could still be useful. This item is of interest as an example of office equipment in frequent use in the years gone by. It will be useful for display.This is a black metal object. It has a metal stand with a circular column inserted in the centre of the stand. The top of the column has an oval-shaped handle. A circular piece of metal is attached to the column by a series of radiating spokes. Attached to the outer rim are twelve metal clips for holding office stamps (usually held by the handle of the stamp). The metal clips are held in place by metal studs. The ends of the metal clips clamp over to hold the stamps. The metal clips are all slightly misshapen. history of warrnambool, vintage office equipment -
Flagstaff Hill Maritime Museum and Village
Container - Cocoa Tin, First half of 20th Century
The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/The use of tin to protect and store food and other items, revolutionised the world.Tin base and external tin lid, with round internal lid .Colour printed. Used for cocoa. Caption of a woman drinking cocoa, red Australian flag and British flag on other faces. Top embossed "H". Marked - "Old Dutch Cocoa", "Net Weight 8 ozs," (Display side) "Manufactured by Hoadley's Chocolates Ltd, Australia.Top embossed "H". Marked - "Old Dutch Cocoa", "Net Weight 8 ozs," "Manufactured by Hoadley's Chocolates Ltd, Australia.warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, tin, tin plating, food containers -
Flagstaff Hill Maritime Museum and Village
Container - Tea Tin, First half of 20th Century
The history of metal packaging began in Bohemia in the 1200s. Metal has been produced for a very long time. But the first metal used for packaging was tin. In particular, it was the process of tin plating that was invented in Bohemia. Before this no other metal was economically able to be used for packaging. Later, in 1667 Andrew Yarranton, and English engineer, and Ambrose Crowley brought the method to England. Here it was improved by ironmasters including Philip Foley. Then by 1697, John Hanbury had a rolling mill at Pontypool in South Wales. The method they developed involved rolling iron plates using cylinders. This process enabled more uniform blank plates to be produced than was possible by just hammering the tin. https://www.shilohplastics.com.au/history-of-metal-packaging/The use of tin to protect and store food and other items, revolutionised the world.Tin container painted yellow with printed crosses and circles,. The lid is labelled "Robur Cross Stitch Company" and "R" imprinted in the centre although the lid is badly corroded. ‘Cross – Stitch’ (printed green in small crosses and circles) followed by ‘Nett Weight ¾ lb. (printed beige in crosses and circles). Pure Blended Tea. Robur Tea Co Ltd’ flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, robur tea co ltd, tea, tea caddy, tin, tin plating, food containers -
Stanley Athenaeum & Public Room
Tool - Library stamp, "AR" library stamp
Stamp used in Stanley Athenaeum book collection. ÄR" meaning unknown but has been seen in other libraries.Wooden handled stamp. A metal stamp is attached to the end of the bulb shaped wooden handle. The metal metal stamp is small and oval shaped. ÄR"library, stanley library, book stamp, athenaeum -
National Vietnam Veterans Museum (NVVM)
Equipment - Equipment, Army, Lamp
Glass bulb with metal lid & wick. Metal collar connected to glass bulb. Chain attached to collar with ring holding the metal lid.Alcool DeMenthelamp -
Dandenong/Cranbourne RSL Sub Branch
Memorabilia - Whiskey Bottle, George Morton Limited
Glass whiskey bottle with dark green metal covering on the lower half. Inscription on both sides of the metal covering and on the green metal lid.George Morton Limited / Dundee / Celebrated Scotch Whiskieswhiskey, ration, australia, scotland, military -
Whitehorse Historical Society Inc.
Functional object - Cherry Pipper
Small metal utensil to remove cherry pips. Two metal rings for fingers, a metal "push" to remove the pip when plunged down.food preparation, domestic item -
Tennis Australia
Black and white transparency, 1963
Metal plate photographic negative image of 1963 Davis Cup team. Metal plate fixed to wood block. Materials: Wood, Metaltennis -
Tennis Australia
Black and white transparency, 1965
Metal plate photographic negative image of 1965 Davis Cup team. Metal plate fixed to wood block. Materials: Wood, Metaltennis -
Tennis Australia
Black and white transparency, 1958
Metal plate photographic negative image of 1958 Davis Cup team. metal plate fixed to wood block. Materials: Wood, Metaltennis -
Tennis Australia
Black and white transparency, 1960
Metal plate photographic negative image of 1960 Davis Cup team. metal plate fixed to wood block. Materials: Wood, Metaltennis -
Tennis Australia
Black and white transparency, 1964
Metal plate photographic negative image of 1964 Davis Cup team. Metal plate fixed to wood block. Materials: Wood, Metaltennis -
Maldon Vintage Machinery Museum Inc
Perforating Machine
Metal and timber perforator with multiple metal pins. Operated by a hand lever on RHS. Four metal feet with holes for screwing to bench top.trades; printing; machinery; -
Warrnambool and District Historical Society Inc.
Bell, Cow, Late 19th century
This item was originally made to put around a farm or herd animal to enable it to be identified and found if it strayed. Horses, cows, goats and oxen were the animals most commonly given neck bells in Australia as a way of identifying and finding cattle particularly in areas where prpoerties were unfenced or when droving large herds of mixed cattle. Drovers often marked these bells as a way of identifying which cattle belonged to them. Some of these bells from the 1860's onwards were imported to Australia and some were manufactured locally. The cow bell in various sizes is often still produced to sell to tourists, particularly those in Europe. Many of these souvenir bells contain some form of art work. Although this item has no known local provenance it is retained as an early example of the bells placed around animals’ necks to stop them from straying. This is a piece of metal welded to form a cover or a bell container with a bottom opening to hold a metal clapper which is held in place by a metal ring. The top has a metal handle. The bell is very rusted and stained.animal husbandry, warrnambool, history of warrnambool, cow bell -
Bendigo Military Museum
Equipment - MAP MEASURER/OPISMETER, DEPOSE
Vintage opisometer used for measuring distances on maps. Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record..1) Circular chromed metal instrument with handle. Calibrated dial with black markings and hand on a white background. Reverse face has unit conversion details in black text on white background. Each face is covered with a convex glass lens. On the opposite end to the handle is a small wheel with milled edge. As it turns, the hand on the front dial turns to measure distance. .2) Rigid plastic rectangular storage case in two parts. Base is yellow, top is clear..1) Printed on front dial: 'INCHES, MADE IN FRANCE'. Printed on back dial: 'Unit conversion details'. Stamped on metal near wheel: 'DEPOSE, H(logo)B'. .2) Stamped on clear cover: 'CURVIMETRE, MAP MEASURER, H(logo)B, MADE IN FRANCE'.map, map measure, equipment, opisometer, kevin john herdman -
Forests Commission Retired Personnel Association (FCRPA)
Branding Hammer issued to FCV overseer Jim Browning at Beechworth
Metal branding hammers were the most common way to control the sale and movement of hardwood timber produce like logs, railway sleepers, fence posts, and poles from Victorian State forests. Royalty was also paid on this basis. The hammer has a crown stamp on one end with a unique number in the middle (453) which identified its owner, and a crows foot or broad arrow on the other. The broad arrow was a symbol traditionally used in Britain and its colonies to mark government property. Forest regulations state that an authorised officer may use the crown mark to identify produce which has been sold and may be removed from the forest, whereas the broad arrow can be used to brand and mark trees which are not to be felled, or to indicate forest produce which has been seized. Hammers were traditionally only ever issued to forest officers and were an important, and closely guarded tool-of-trade. They were not transferred between staff and lending hammers was not permitted. But it was an onerous task for staff to hammer and tally hundreds of logs, or thousands of fence posts each week, so in about 1990 a system was introduced whereby hammers were allocated to logging contractors to grade logs and tally them instead. But there was still spot checking by authorised officers. A register was kept, and contractors paid a substantial deposit to make sure they didn't lose them, but they occasionally turn up by fossickers with metal detectors. While branding hammers are still used in some smaller locations, plastic tags and barcodes are now more common.Metal log branding hammer with a crown stamp on one end with a unique number (453) in the middle which identified its owner, and a crows foot or broad arrow on the other. The unusual bent metal handle was designed to protect user from banging their fingers on the log. It was also fitted with a rubber hand grip. Most FCV branding hammers were issued with wooden handles. The branding hammer 453 was initially issued to Wally Cowell at Beechworth. It was reissued to Jim Browning upon Wally’s retirement The hammer still had a wooden handle, but the it broke and became loose inside hammer head. Russel Pritchard from the Beechworth Depot replaced the handle with a new metal one and put a dog leg in it It mainly branded forest produce cut in Mt. Pilot and Reedy Creek areas. The main logging contractors were Gordon Habeck from Chiltern and Steven Goldsworthy from BeechworthCrown mark one end (453) and Crows foot other endforest harvesting, forests commission victoria (fcv) -
Stawell Historical Society Inc
Archive - Display Folder, Navarre Minerals, Navarre Minerals Newspaper Clippings, 2008
Precious Metals Exploration CompanyLarge Black A3 Sized Pocket FoldersNavarre News Articles 2008 to 2020mining -
Trafalgar Holden Museum
Tool - Foot print wrench
used in Metal construction and plumbingImported and sold by Holden and FrostTwo part steel adjustable wrench, with outer covering inner, pivoted so that wrench is adjustableMade in Englandsteel, footprint, wrench -
Flagstaff Hill Maritime Museum and Village
Functional object - Trunk, Bef. 06-10-1855
This metal travelling trunk belonged to David and Alice Ellis, a young couple married in Dublin in 1855. They left for Australia on the Schomberg clipper ship on October 6 that same year, joining the other passengers for the luxury sailing ship’s first voyage, bound for Melbourne, Australia. The Schomberg was grounded on a sand spit near Peterborough. All passengers and crew were safely rescued. They had been allowed to take something small with them when leaving the sinking vessel, and as such, Alice took a small can basket and coin purse. The metal trunk was also amongst the couple’s possessions, along with a pair of candlesticks and a Bible. Their trunk was later retrieved from the ship’s deck by the crew of a steamer sent from Melbourne. At that time, David was 23 years old (born in Wales, in 1832) and Alice was 26 (born in Ireland, 1829). The couple lived in Tasmania for a short period before settling in the Western Districts of Victoria. David worked as a gardener and, when land in the area was available to purchase, David and Alice claimed a selection on Noorat Road near Terang. They settled there for the remainder of their lives, expanding the property that they named, ‘Allambah’, and had six children. David died in 1911, aged 79, and Alice passed away the following year, aged 83. B, B & B. Brand: - The company was renowned for its strongly constructed and high-quality travel goods. In 1906 the company was sold and renamed Buffalo Trunk Manufacturing Co. Interestingly, the trunk maker’s promise on its printed label is certainly fulfilled: - "B B BRAND. These Goods are manufactured of the best steel sheets, and are guaranteed to give every satisfaction, and will last for years."David and Alice Ellis’s donated possessions have great significance as a group of personal belongings saved from the sinking luxury clipper ship, the Schomberg, in 1855. The strong, well-crafted metal trunk is an example of high-quality travel luggage owned by newlyweds on their journey to a new life across the world. The well-made trunk is a rare shape. It joins Flagstaff Hill’s collection of artefacts from the Schomberg shipwreck, which is listed on the Victorian Heritage Register (VHR S612). The ship has historical significance as a rare example of a large, fast clipper ship on the England to Australia run, built to carry emigrants at the time of the Victorian gold rush. The ship’s design included the technical advances needed to break sailing records between Europe and Australia. The relationship of the objects in Flagstaff Hill’s Schomberg collection allows has potential interpretation of the story of the Schomberg. The collection of objects is archaeologically significant as the remains of an international passenger ship, as it represents aspects of Victoria’s shipping history, in addition to its association with the shipwreck and the ship.Traveller's metal trunk; small brown woodgrain patterned trunk with dark red features and brass lock. This well-made strong and sturdy piece of secure hand luggage has rounded corners and sides, with the ends of the lid slightly bulbous. The lid is reinforced inside across the centre. The lid and sides have dark red metal D-shaped handles that fold down. The two hinges on the lid have their fittings inside the trunk which is hinged across the back. Two dark red painted latches secure the front along with a brass rod and lockable latch in the centre front. The metal is shaped with a group of corrugated ribs on each side of the centre, around the trunk. A white printed and lacquered label is inside the lid and has additional handwritten text. The truck was the luggage of David and Alice Ellis on the sailing ship SCHOMBERG in 1855. Printed on the label: "B B BRAND./ These Goods are manufactured of the best / steel sheets, and are guaranteed to give every / satisfaction, and will last for years." Handwritten on the label: "8/3- 7/-" (possibly meaning Eight shillings and three pence, Seven shillings)flagstaff hill maritime museum and village, great ocean road, shipwreck coast, schomberg, sailing ship, 1855, david and alice ellis, schomberg passengers, b b brand, american made, traveller's trunk, hand luggage, metal trunk, schomberg ship, 1855 shipwreck, peterborough shipwreck, ss queen, david ellis, alice ellis, allambah terang, dublin emigrants, terang presbyterian church, western district victoria, antique trunk, vintage trunk, travel goods, travelling trunk, steel trunk, tin trunk, schomberg trunk, newlyweds, b b & b, boyd boyd & boyd, pittsburgh, rare shape, luggage, vintage luggage, victorian era, travel trunk, three locks, steamer trunk -
National Vietnam Veterans Museum (NVVM)
Plaque, Australian Force Vietnam
Wooden shield with emblem bordered with 16 military crests surrounding centre featuring globe of the world, sword and yellow and red striped bannerSmall metal plaque on top reads "Presented to Maj. K.M. Batters by All Members HQ AFV. 1967-68"plaque, australian force vietnam -
Whitehorse Historical Society Inc.
Functional object - Book Ends, Metal Book Ends decorated with Copper Horses, C1920s
Belong to donor's mother-in-law, the late Mrs Doris Keene.Silver coated horse book ends.Metal book ends with copper horses standing on base. Curled design at one end. Green baize under base.domestic items, ornaments / decorative -
Kew Historical Society Inc
Machine - Dictaphone, 1900-1920
Dictaphone from the Kew Town HallLocal historic significance due to its use and wider scientific significance for its technological innovationDictaphone used in the Kew Town Hall in Walpole StreetMetal label: "THE DICTAPHONE / TRADE MARK / 35 WILLIAMS STREET / MELBOURNE / PHONES 3688-11572 / AND AT SYDNEY - BRISBANE - ADELAIDEdictaphone, kew town hall (walpole street), office equipment, recording equipment -
Ballarat Diocesan Historical Commission
Irish Hibernian collar, Hibernian ceremonial collar
Ceremonial collar from Derry (Londonderry) Ireland in Northern Ireland for the Ancient Order of Hibernians and belonging to John Duddy donated in 2013 by the Macalinden family Port Fairy.A rare example of Irish Hibernian regalia in an Australian collection brought to Australia by the immigrant owner and later donated to the Diocesan Archive by his family. The object is significant in its embroidery and applique work and as an example of the importation of an Irish form contrasting to Australian variants of such collars. Significant in its representation of the contribution of migrants and the Irish to Australian culture.applique red hand of Ulster, Shamrock, Harp, Celtic cross with stars on each shoulder. Fringed in gold metal braid.port fairy, hibernian, derry, londonderry, northern ireland. -
Wodonga & District Historical Society Inc
Domestic object - Vintage cane basket
This handmade basket is typical of baskets used for domestic purposes for many years in the early to mid 20th century. It was produced in Australia by Graf's. Wicker baskets were popular at this time as they were light but durable. They were made in a wide range of shapes and sizes, including laundry baskets, storage items in the home, in shops and by travelling hawkers. Wicker was also a common material used for furniture. Vintage baskets by Graf's are still in demand by collectors.This item is significant as it is representative of basketry items popular throughout Australia in the 1960s. This basket was hand-made in Australia and used by a resident of the Wodonga district.A woven cane shopping basket with a wooden base and single bamboo handle. The basket is made from mixed weaving of cane and light-blue strips. Underneath basket: Original GRAF'S Basket Hand made in AUSTRALIA On metal attached to handle: GRAF’S HANDLE BINDING, PAT.PEND vintage cane wear, vintage basket -
Warrnambool and District Historical Society Inc.
Meat Safe, Household, Early 20th century
This meat safe has no known local provenance but it would be typical of the safes used in a domestic situation to house fresh meat. Usually the safe was hung in a house corridor or verandah or outside in a cool place where there was a breeze that passed through the mesh and kept the contents cool. The mesh also prevented flies and other insects from getting into the safe. Meat safes were widely used in Australian homes in the 19th century and early to mid 20th century, sometimes in conjunction with ice chests, until they were replaced by refrigerators. This item is retained for display purposes as an example of domestic food preservation in Australia 80 to 100 years ago.This is a metal box with a rectangular-shape base and a semi-circular top. All sides except the top and the bottom are made of fine metal mesh. The front is reinforced with metal strips and has a metal clip. The curved top is ridged and has a metal clip.The safe is somewhat rusted and damaged. Registered under Commonwealth Act Nos. 101-102-103 G.W.Rowleyfood preservation – australia, warrnambool, history of warrnambool -
Numurkah & District Historical Society
Candle Lantern
Metal rectangular box with curved top and curved handle. Two sides are glass and two sides are metal. One metal side has a sliding door, the other metal side has a clip for hooking onto objects. Inside the box is a metal candle holder with a candle in place candle light, lmap, lantern -
Warrnambool and District Historical Society Inc.
Steroscope, Underwood & Underwood, Circa 1900
Underwood and Underwood commenced manufacturing stereoscopes and cards in the 1880’s, and by 1900 they were selling 300,000 stereoscopes a year and producing 25,000 cards a day. A large volume of their photographic work survives to this day.A popular item which was in common use around 1900. The cards used, provide a useful view of people and places around that time. They were pioneers in the field of news photography. Many of their images are still available today.Metal viewing section with glass inserts with wooden extension with a sliding viewing section with metal brackets. Metal part has figured marking around top. It has a fold down wooden handle with metal hinge.Manuf’d Underwood & Underwood Patented June 11 1901Foreign patents applied for.warrnambool, stereoscope, underwood & underwood