Demonstrates and yields information about the considerations made for Weekly Tickets during the late 1920's.Set of handmade or hand written sheets regarding weekly tickets in Ballarat - using ink and pencil .1 - Lined foolscap sheet dated 3-10-26, titled "Notes on Weekly tickets", regarding availability, point of sale, sections, availability, midday or lunch time usage, numbering, use of tokens, fare boxes, disadvantages, and possible layout sketches. .2 - ditto, pencil notes, about ticket revenues, overlapping sections, limit of times, holidays. See also Reg Item 8019 for a 1921 and 1928 documents. trams, tramways, tickets, esco, weekly tickets

These photographs appear to have been used for lantern slidesHandmade photograph album made from cardboard tied together with cord. Large photographs pasted in. "Lantern Slide," or "Slide," handwritten beside each photograph. Also see B10.0021. (1)6 female students working in the flower garden with a member of staff. (2) View of the Lily Ponds with the Principal's Residence in the background. (3) The Croquet lawn. (4) Side of the Principal's Residence looking towards the Pavilion in the background. (5) Path to the Principal's Residence with the roof of it in the background. (6) Blossom tree. Also see Bfemale students, flower gardens, staff, lily ponds, principal's residence, croquet lawn, pavilion, blossom trees, lantern slides

Used by ESCo to enable identification of depot employees when travelling on the trams. Date made and when used unknown. Has hammer marks on rear of badge. See item 9038 for another example.Demonstrates a employee's free pass for travelling on Ballarat's trams.Handmade metal badge from brass sheet about 52 in diameter with a slot (long oval shape) about 23 long x 5 deep through which a leather strap about 100 long x 10 wide with a steel buckle is fitted. Stamped in capital letters on the badge are "BALLARAT TRAMWAYS" on the outside, "EMPLOYEES DEPOT PASS", in the centre of the badge, with the word "Employees" in a semi-circle. Near the bottom of the badge is the number "12", the one formed using an "I". The letters have been filled with a white paint.tramways, trams, esco, depot, employees pass, badges

These handmade skittles in this set appear to have had a lot of use as the surfaces of the skittles are well worn. The skittles have a hole in the top, indicating that they were made on a wood lathe. The game of skittles is played indoors and outdoors. It is a traditional target game or sport and the forerunner of the sport of bowling. A standard skittle set has nine skittles and one or two balls. The skittles would be arranged in a diagonal square pattern and a ball would be bowled towards them, for a given distance away. The object is to knock down as many skittles as possible. These skittles are representative of the traditional games played by children and adults over the centuries.Set of four wooden skittles, cylindrical body tapering inwards to form a narrow keck with a knob on top. Knob has two flat surfaces. The bodies and knob tops of the skittles sow remnants of wood stain but the bodies' surfaces are worn. The tops have a scored line around their circumference. The bases are rounded, with the edges off the floor. The top and base of the skittles have a hole in the centre. flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, skittles, pins, game, children's game, traditional game, bowling, toy

The Fashion, Textiles & Design Collection includes a number of examples of household or domestic textiles dating from the Nineteenth and Twentieth centuries. Some had a purely functional role while others were essentially decorative. These textiles were mass-produced or handmade, and sometimes including elements of both. Many were constructed of, or include elements of, lacework, tatting, embroidery or crochet. Donated throughout the Society’s history by members or residents of Kew, the provenance of many items is now unknown, however they remain in the Collection to illustrate the social history of the Australian home.White crocheted doily incorporating the motto of the Australian Natives Association and a pictorial representation of an emblem that would become the Commonwealth Coat of Arms.doilies - patriotic, doilies - symbolic, soft furnishings, australian natives association, advance australia

This wooden spokeshave was used in the making of ship model Sovereign of the Seas. It would have been used to shave and shape wood in a similar way that a plane would be used. Its name comes from its use for shaping curved objects such as wheel spokes, oars, paddles, chair legs and bows. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker.This spokeshave is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spokeshave was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Spokeshave; two-handled, medium coloured wood tool, slightly curved centre. The front has two blade screws protruding from it, the back has a flat ‘sole’ with removable brass blade attached by screws. This spokeshave is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. (Illegible text is pressed into the top side of the spoke shave.)flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, spokeshave, spoke shave, sovereign of the sea, ship model, hobby, ship model tool, english war ship

This fine Reeves paint brush was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. REEVES - Reeves & Sons Ltd, makers of fine art supplies, operated under this name in London, England, 1891-1976. The company was founded as Thomas Reeves and Son in 1784. SOVEREIGN OF THE SEAS - Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This brush is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This brush was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Paint brush, narrow ‘0’ size, Reeves brand, no. 157, made in England. Inscription printed in silver paint. This paint brush is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. Printed on handle -“MADE IN / ENGLAND” , “REEVES”, “157”, “0”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, paint brush, reeves of england, sovereign of the sea, ship model, hobby, ship model tool, brush

There is evidence of the game of marbles in the ruins of Pompeii and the tombs of Egyptians as well as early American Indians. The earliest marbles were simply rounded stones which had been polished but this was refined to handmade versions made of clay, stone and glass. It was in the late 19th century that mass production began and it gives testament to the popularity of the game that the Dyke factory of Ohio could produce 1,000,000 marbles a day. It was around 1915 that the mass production of glass marbles began. The game reached the height of popularity in the 1920-1930’s. Many were prized for their designs.The game of marbles was one of the most common games played universally, from childhood hence has a strong link with people of all ages and cultures. Five marbles in glass jar. All are various sizes ranging from large yellow streaked with red and blue, black striped with white, marbled tan, clear with multi coloured streaks and bright blue. Shapes are roughly spherical. Materials range from glass to glazed and stone. Three have pontil marks either on end.The lid of the jar has Nestle vacuumed sealed for extra protection. Use special key to open. Old sticker on base with 173 written in black lead pencil. toys, marbles, children's games, warrnambool, handmade marbles, glass marbles, clay marbles, agate marbles

The Wied family were settled in Palestine upon the beginning of WWII. Being of German nationality, they were considered a threat to security by Allied forces & were interned in temporary camps, before being shipped to Australia. In Australia they were interned in Camp 3, Tatura, a family camp for enemy nationals. Many of the internees came with few possessions. This item is just one of the handmade domestic items fashioned in the camp from largely scrap materials to give some home comforts in the initially barren surroundings of the camps, particularly to those interned with families and young children. Butterfly shaped brooch made from Paua shell. Fixed to a brass safety pin. world war ii, camp 3, palestine, tatura, jewellery, internment camps

A gift to Ron Cochrane, a member of the Navy commissioning team of HMAS Voyager. The box was handmade by two brothers CLARK/E (?) from Benalla. The signatures done in ball point pen belonged to the crew attached to the portside Forward Mess. They presented the box to Cochrane who was responsible for the Mess as a token of appreciation. Ron Cochrane R46195 served as a Leading Hand with the Royal Australian Navy between 1951 and 1957 and served on numerous ships including HMAS Voyager between 6/2 - 6/10/1957. He was born on 20/3/1933 at Ballarat East. Daring class destroyer, Voyager, was the first ship of her class to enter Australian service, and the first all-welded ship to be built in Australia. During the night of 10 February 1964, Voyager and the aircraft carrier HMAS Melbourne collided off Jervis Bay, when the destroyer passed in front of the carrier during post-refit sea trials. Voyager was cut in two by the collision, sinking with the loss of 82 of the 314 people aboard. This was the largest loss of Australian military personnel in peacetime, and the subsequent investigations resulted in the holding of two Royal Commissions—the only time in Australian history this has occurred.Cream painted wooden box with metal hinges. There is an inscription and ship on the lid and autographs written in ink on the underside of the lid. On top of lid - HMAS Voyager 1957 On bottom: Bills, bills and more bills !!!!!! Dotted line R Cochranehmas, voyager

The loom was made by John Charles Mann in the late 1920s-early 1930s for Lilian Joyce Mann. Mr Mann enjoyed woodwork. He died in 1945. Ms Mann was very interested in crafts and owned a shop in Jacob Street which sold handmade soft toys and items woven from the loom, for example table mats. The shop was later bought out by Henry Jacobs and later became Myer. Ms Mann died on the 17th July 2007. Ms Mann was a founding and life member of the Geelong Handweavers and Spinners Guild.W7219 (Mann loom) Lilian Joyce Mann's loom in house Lilian Joyce Mann's loom in houseOxy & Electric Welding Motor & Gehandicrafts, geelong handweavers and spinners guild inc., weaving looms, weaving, mann, mr john charles mann, ms lilian joyce, geelong, victoria

Dress worn by Mary (Molly) Sprunt on marriage to John (Jack) Leith on 12 March 1938 at St Andrews Presbyterian Church, Rushworth. Veil was handmade by mother Madge Brydon in 1912 for her wedding. Dress and veil donated by Molly's daughter. Dress also worn by sister - Lyndsay (Lyn) Sprunt for her marriage to George Hendrie on 10 November 1945 at St John's Church Elsternwick. Gown made by Molly and Lyn's aunt Edith Brydon. Veil (NA3495) worn was made by mother Madge Brydon. Donated by Molly's daughter.Cream damask 1938 satin dress. Long sleeves, cross over neckline to a diamond front panel. Skirt cut on the cross, with front pleat. Back skirt has long train. Self-covered buttons at centre back.|See also NA3495 - Veil. Also worn for 1945 wedding with veil. NA3496 - Shawl.costume, female ceremonial

Thomas Burch Ford (1818-1892) began producing blotting paper and filter papers for personal and industrial use, after taking over Slade's Original Handmade Blotting Company in 1881. John Letts produced the first commercially available diary in 1812. In 1835 the business was taken over by his son Thomas and grandson Charles John joined the company in 1870. In 1881, after a brief hiatus, Charles restarted the business as Charles Letts and Company, the name it retains today. The blotters were included in the diaries as a form of advertising both for Letts and for TB Ford.A Collection of Ford's Blotting Paper: Orange(1), blue(1), green(2), light green(1) yellow(1), light pink(1) and pink(1) coloured blotting paper with blue print. Advertising * Charles Letts's Diary Blotter. An Alliance of Quality Comfort and Economy. Fords Gold medal absorbent Blotting. Ford 428 Mill Made in 22 Colours and white. The very best obtainable Ford's Gold Medal Absorbent Blotting. Box 625T.B. Ford, Ltd. Snakeley Mill, Loudwater, High Wycombe, London Showroom 72 Piccadilly, W.1. Ch.L. - 2- F8064ephemera, mementoes, blotting paper

The items in this collection of Ecclesiastical Linen were used by St. Andrews Anglican Church on the corner of the Esplanade and 14 Drummond St, Dennington, Victoria. The first Anglican service was conducted on December 22nd, 1907. The church was decommissioned in January 2003. The items donated include Maniples, Chalice Covers, a Goblet Cover, Altar Cloths, Matts, Priest's scarf, armband and sashes, and a bag that is a cover for the Baptismal Towel. HISTORY OF ST ANDREWS, DENNINGTON The land on which St Andrews Church was built in Dennington was surveyed in the 1840s and reserved for church purposes in 1855. In 1889 the Farnham Dairy factory relocated to Dennington and the town began to grow as involvement in the dairy industry increased in the area. In 1896 plans for a church hall on the reserved land were considered and on 22nd December 1907, the first Anglican Service was conducted in Dennington, with 60 people attending. In August 1909 the first building was opened with a midweek evening service conducted by the Rev. J.A. Coe. The Sunday School was opened the following year. In that same year, Nestle took over the Farnham dairy plant. On December 20th, 1914, a new church was opened in memory of Andrew Peacock, who passed away in 1912. The funds had been raised by the community and 150 attended the morning service. The building was described as a simple edifice with a plain exterior and high, wide pointed windows, and a comfortable porch entrance, all of which gave a pleasing impression of light and space. In 1935 the average attendance for morning services was just over 22 people. In 1936 extensive repairs and replacements were carried out. In 1947 the first recorded Pastoral Festival took place and in the same year, a Ladies Guild was formed. In 1954 water services were connected to the church building. Many items of furniture, furnishings and books were donated over the life of the church, including handworked linen items. Further items were added due to the work of the Ladies Guild, as well as donations in memory of church and community members.These items of Ecclesiastical Linen are significant as examples of handworked embroidery and drawn-thread work from the early 20th century. They are also examples of a collection of items used for church services during this period. The Ecclesiastical Linen is also significant for its association with the early development of the local township of Dennington and the importance of setting aside land in the 1850s for the purpose of religious worship. The Ecclesiastical Linen is also significant for its connection to St Andrews Anglican Church, Dennington. The church was funded and attended by the local community in the early 1900s and is now listed on the Victorian Heritage Database (VHD 118083) as a building of historical and social significance. Set of Ecclesiastical Linen. The items were once used in St. Andrew's Anglican Church, Dennington, Victoria, between the years 1907 and 2003. All of the handmade items are in white fabric. Some also have embroidered emblems, tassels and drawn-thread work. White embroidery thread has been used for most of the decorated items, with the following exceptions, which have been embroidered with coloured thread; the communion linen, the Priest's scarf, armband and sash, the altar cloths, mats and a cover for the baptismal towel. Two items have hand written inscriptions.(See individual objects for details)flagstaff hill, warrnambool, maritime museum, shipwreck coast, great ocean road, st andrews anglican church dennington, dennington church, warrnambool church 1907, ecclesiastical linen, linen for religious service, communion linen, priest's sash, baptismal towel, maniple, eucharist, emblem of rope and cross, embroidered religious cloths, embroidered celtic cross, drawn thread, chalice covers, handmade linen, embroidered linen, stylised cross, the english church, ladies guild dennington, nestle, farnham dairy, andrew peacock, victorian heritage register vhr 118083, hand worked linen, handworked embroidery, j.a. coe

Handmade brown wooden honour board, retangular with octagon-style corners, white painted names of those who served and small Australian and UK flags. Lists the following names: W. Gale, B. Withers, A. Charles, J.B. Dixon, H. Eggleston, M. Harrison *, R. Thompson, W.J. Tanner, W. G. Rail, Wm. Gale, A. W. Ellis, A.P. Smith*, N. Clarke*, T. Fraser*, J. A.McLean, H. Withers*, R. Daglish, A. E. Ellis*, R. B. Dixon, C. Withers, J. Thompson*, J. ClarkeAbove the names listed reads: 19 LILLIPUT 17 / Methodist Church / Honor Roll / Attendants of this Church who / fought for the Empire in the Great Warhonour boards, wwi, the great war, first world war, lilliput

Very old hand-made wooden stool 47 centimetres long, 14 centimeters wide and 19 centimetres high. The top is one and a half centimeters thick. The two sides are made from one centimetres thick wood and are 47 centimetres long tapering to 36 centimeters and seven centimeters wide. The two ends are 17 centimetres long, 14 centimetres wide and two centimetres thick, it checked out to fit into the sides of the stool, there are two centimetre notches cut into the bottom which create the impression of legs. The nails that hold it together are handmade.wooden stool, miner's item

This spiky, pointy metal flower holder, often called a flower frog or kenzan, was made around the late 19th to the early 20th centuries by Stayput Products of Melbourne, Australia. The flat metal base has been made in layers with the head of the spikes between the layers. It is likely to be handmade. Heavy flower holders made of non-corrosive metals are designed to sit in the base of a vase, dish, bowl or other suitable holder so that cut flower stems can be pushed into the spikes and held firmly in the arrangement. Flower frogs can be made of glass, ceramics or, more recently, synthetic materials.The flower holder is an example of Victorian era domestic decoration aids that have carried through to the 21st century.Flower holder, rectangular block made from layers of metal, with spikes embedded into the metal. The block is heavy, likely to be lead, and the spikes are strong brass pints arranged evenly in rows. There are remnants of florist's putty between some spikes. An inscription within concentric oval rings is moulded in the flat base. Made by Stayput Products, Melbourne, Australia.Stamped into the metal: "STAYPUT / PRODUCTS / MELB. AUST."flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, flower frog, flower arrangements, flower holder, pin-holder, stayput, flower aid, ikebana flower arrangement, kenzan, moribana style, flower support, melbourne manufacturer, spiky pin frog, metal flower holder, stayput products, flower block, flower arranger, vintage, antique, late 19th to early 20th centuries, vase accessory, decorative item, floral arrangement support, florist accessory, floral art, needle aids, victorian era

This beaded dress collar is of a style from the mid 20th century - possibly even as early as the 1930's. It is designed to be easily removed and worn with different outfits - e.g. a dress, knitted top or blouse. Articles from Australian newspapers (particularly the Women's fashion pages) in the decades from the 1930's through to the 1950's often mentioned society ladies wearing "beaded collars" when describing their fashions and in the 1950's "beaded collars" were being made and imported from Japan however this particular collar appears to have been handmade. Unfortunately the maker of this collar is unknown.This item is an example of how women in the mid 20th century used their needlework skills to personalise and embellish an item of clothing (a collar) designed in a practical way to be able to be used with different items of clothing. Lady's beaded collar with a decorative floral design of flowers made with blue beads, outlined with bronze beads on a white beaded background. Bronze beads have also been used to "draw" leaf shapes and tendrils and outline a border all around the collar. A hook and eye are attached to a fine cotton bias band at the top of the collar and the beading is sewn onto a fine net lining.flagstaff hill maritime museum and village, warrnambool, great ocean road, fashion, beaded collar, beading, decorative fashion, collar, lady's fashion

This broken black glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a cylindrical dip mould. The molten glass was blown into the mould to give the body a uniform symmetrical shape and size. After the body was blown, the glassblower removed it from the mould and formed the shoulder and neck by free-blowing the glass. The base was pushed up with a pontil tool that gave it the concave shape. The finish for the mouth was added by hand to form the collar. The mould gives the body a slightly textured surface. There is usually a line around the shoulder where the mould meet the base, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, black glass, 'gallon' style. Applied lip, straight collar with circular lines from being hand moulded. Shoulder seam, body tapers inwards towards base. Heel has varied width, shallow base has small pontil mark. Mouth is chipped. Glass is discoloured and has uneven surface and encrustations. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, black glass

Jacket - Khaki colour wool serge fabric. Battle Dress style with belt at waist. Brown metal buttons with shank and split pin. Buttons have raised emblem - map of Australa and Crown and lettering "AUSTRALIAN MILITARY FORCES". Collar, shoulder epaulettes, four front pockets with button down flaps, sleeve cuffs. Unit colour patch insignia - handmade purple over red - 38th Battalion. Collar badges - metal - Rising Sun Badge. Shoulder epaulettes - metal "AUSTRALIA" badge. Manufacturers white cotton fabric label - inside right pocket.Manufacturers information on two labels. Black ink print - "REGIMENTAL NO./NAME" Red ink print - "V162/ MADE IN/ AUSTRALIA/ 1942/ size". Handwritten black ink pen "XXX/ 20X" uniform, army, battle dress, ww2

The ring was made for the donor by her father in Camp 3, Tatura. The Wied family were settled in Palestine upon the beginning of WWII. Being of German nationality, they were considered a threat to security by Allied forces & were interned in temporary camps, before being shipped to Australia. In Australia they were interned in Camp 3, Tatura, a family camp for enemy nationals. Many of the internees came with few possessions. This item is just one of the handmade domestic items fashioned in the camp from largely scrap materials to give some home comforts in the initially barren surroundings of the camps, particularly to those interned with families and young children. Small brown metal ring, with a small heart soldered to the ring. camp 3, tatura, world war ii, internment camps

Norway, around 1840, was the first country to produce and use glass fishing floats. Many of them can still be found in local boathouses. Christopher Faye, a Norwegian merchant from Bergen, is credited with their invention. The earliest floats, including most Japanese glass fishing floats, were handmade by a glassblower. Recycled glass, especially old sake bottles in Japan, was typically used and air bubbles/imperfections in the glass are a result of the rapid recycling process. Glass floats have since been replaced by aluminum, plastic, or Styrofoam. Today most of the glass floats remaining in the ocean are stuck in a circular pattern of ocean currents in the North Pacific.By the 1940s, glass had replaced wood or cork throughout much of Europe, Russia, North America, and Japan. Japan started using the glass floats as early as 1910. Now they are still highly sought after as decoration.A glass float with intact knotted rope net attachedfishing, floats, glass floats

This building at 21 Brougham Street, Eltham, known previously as The Light Factory, now Second Home restaurant, was designed by Alistair Knox and is one of the few commercial buildings he designed. It was a combined residential (rear) and factory (front) development. The Light Factory Gallery; OnlyMelbourne "The Light Factory Gallery was built in 1973 and is a classic example of his design. Exposed soaring six metre Oregon beams, handmade bricks, clerestory windows flood the building with natural daylight giving treetop views of the eucalypts that he designed the building around." The Light Factory Gallery. (2024, March 31). Retrieved from https://www.onlymelbourne.com.au/the-light-factory-galleryjim connor collection, brougham steet, eltham, alistair knox design, industries, restaurants, second home, the light factory gallery

Owned at the time by architect, Ian Jelbart, the property had been in the Jelbart family since the 1940s; a 5560sqm secluded hilltop parcel in Eltham. When the manor house and its barn were built, Eltham was a rural community; Jelbart’s grandfather Ronald was a businessman whose poultry farm formed part of the family’s original 100ha holding. A portion would later be subdivided into residential lots to make way for new homes that would form the basis of the Woodridge Estate in the early 1970s. The Barn was developed as a residence by Ian Jelbart in the late 1960;'s. Handmade mud bricks were used in its construction. This is a view from The Barn looking towards the Manor HouseDigital file only; created from scan undertaken by EDHSarthur street, eltham, houses, jelbart barn, jelbart property, kinloch gardens, verandah, mud bricks, enclosure

This was the uniform of junior girls from the 1960s until the new campus for secondary students began at Truganina in 1978. Shortly after the opening of the secondary campus a new dress, green in colour, was adopted for all girls. This summer uniform dress, donated by a past parent, was handmade and worn by a prep student in 1977. It is a rare example of the school dress from this period. Together with a dress pattern and a sample of the same fabric donated by another past parent, these items have historic significance and interpretive capacity. Current students enjoy learning about how different the provision of school uniforms was not so long ago, as Westbourne uniforms can now be ordered online.Small belted dress in blue checked pattern with white collar and sleeve cuffs and three white buttons down the front.

This broken, handmade black glass bottle was made around the mid 1800s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is now part of the John Chance collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late-1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to be made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body was blown, the glass blower continued blowing free-form (without the mould) to form the shoulder and neck, then the base was pushed up with a pontil tool, and the finish for the mouth was added. The dip mould gives the body a slightly textured surface, with the free blown shoulders and neck usually looking smoother and shinier. A horizontal line can often be seen around the shoulder where the mould of the body meets the free-blown shoulder. A lump or mark in the centre of the base, called a 'ponty' mark (named after the pontil tool), is also common on this type of bottle. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. (Similar bottles were recovered from the 'Loch Ard' shipwreck, lost in 1898.) The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, thick black glass (dark olive) with matt surface. Mouth has been broken off, leaving sharp edges. Short neck, wide shoulders, body tapers slightly inwards towards base. Wide uneven heel and deep concave base with a fold line in glass. No visible seams.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, bottle, black glass, antique bottle, handmade, mouth blown, blown bottle, liquor bottle, ale bottle, 19th century bottle

This broken black glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a three piece dip mould with a cylindrical base and two removable neck pieces. The molten glass was blown into the mould to give the body a uniform symmetrical shape and size. After the bottle was blown, the glassblower removed it from the mould then the base was pushed up with a pontil tool that gave it the concave shape. The finish for the mouth was added by hand or with another tool to form the ring collar. The mould gives the body a slightly textured surface. There is usually a line around the shoulder and on the sides of the neck where the mould meet, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, black glass. Mouth is broken off. Roughly applied ring collar. Bottle has shoulder seam and two neck seams. Heel is uneven, base is concave with tool mark. Glass has crease lines, a drip and imperfections. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, black bottle, three pece mould

This broken black glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a three piece dip mould with a cylindrical base and two removable neck pieces. The molten glass was blown into the mould to give the body a uniform symmetrical shape and size. After the bottle was blown, the glassblower removed it from the mould then the base was pushed up with a pontil tool that gave it the concave shape. The finish for the mouth was added by hand or with another tool to form the ring collar. The mould gives the body a slightly textured surface. There is usually a line around the shoulder and on the sides of the neck where the mould meet, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, black glass, 'gallon' style. Applied broken lip, wide collar. Shoulder seam, two side seams, body tapers inwards towards base. Concave base. Glass has bumps, creases and imperfections.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, black bottle, three pece mould

Shillinglaw Cottage looks stable enough now but it was the first colonial building in Australia to be pulled apart brick by brick and reconstructed on a different site. Community outrage prevented the council from demolishing the cottage in 1963 to make way for Eltham’s Shire Offices and local people paid for the cottage to be moved. Originally built by respected local builder George Stebbing in 1859, the cottage is typical of European farmhouses, but is constructed of handmade local bricks in a style known as “Flemish Bond.” The chequered pattern created by the burnt “header” bricks is a unique feature of this style. The cottage’s name comes from its long association with the Shillinglaw family, who loved there for more than eighty years. The Cottage is classified by the National Trust. Tomorrow's history documented todayeltham, jim connor collection, main road, shillinglaw cottage

This handmade blouse with its matching belt was donated along with a note that says, "This jacket was owned by Marion Leishman who married Captain Eadie. They lived in Warrnambool and are buried at Tower Hill Cemetery." The spelling on the headstone is "Edie" rather than "Eadie". Marion Leishman Edie was born in 1835 and died on August 7, 1914. She married Captain Richard Wilson C Edie in 1865. Capt. Edie drowned at sea on 16th June 1883 aged 49 years. Marion Leishman Edie died on 7th August 1914 aged 79 years. Her sister Alison Keishman Sprod, died in 1863, aged 25 years, and is also buried in the same grave at Tower Hill. The fine satin blouse and matching belt is an example of clothing worn by women in the mid-to-late 19th century. It demonstrates the beautiful and talented skills applied to handmade garments. The decoration indicates that the blouse or jacket was worn for a special occasion.Blouse of black satin, decorated with lace and sequins. Long sleeves are puffed at the shoulder fitted at the lower arm and cuff. The belt has sequins and tassels. Black lace is added around the neck and bodice, fastened at the front with hook and eye.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, costume, blouse, belt, female adult, clothing, fashion, satin, lace, wonem's clothing, marion leishman, captain eadie, tower hill cemetery, marion eadie, jacket, black satin jacket, sequins, marion edie, richard wilson c edie, drowned at sea, marion leishman edie, handmade, black jacket, sequined satin jacket