Showing 2814 items
matching jim-gillespie
-
University of Melbourne, Burnley Campus Archives
Document, Review of The University of Melbourne Centre for Urban Horticulture, 2002
By Prof. Jim Kollmorgenjim kollmorgen, university of melbourne, urban horticulture -
Ballarat RSL Sub-Branch Inc.
Book - "Return to Civil Life"
From Jim Wallacesecond world war (ww2), 1939 - 1945, literature, ballarat rsl, ballarat -
St Patrick's Old Collegians Association (SPOCA)
Photograph - Alumni, General
-
St Patrick's Old Collegians Association (SPOCA)
Photograph - Alumni, General
-
Orbost & District Historical Society
gramophone record, 1930's
James Hutchinson (Jim) Davidson (1902-1982), band leader, was born on 6 August 1902 at Balmain, Sydney. Davidson opened the winter season of 1933 at Sydney’s Palais Royal Dance Hall, which drew crowds of 10,000 a week.The phonograph disc record was the primary medium used for music reproduction until late in the 20th century, replacing the phonograph cylinder record—with which it had co-existed from the late 1880s through to the late 1920s. Records retained the largest market share even when new formats such as compact cassette were mass-marketed. By the late 1980s, digital media, in the form of the compact disc, had gained a larger market share, and the vinyl record left the mainstream in 1991. This item is an example of music popular in the 1930's.Double sided black disc with a single central hole. Side A is "Goody-Goody - Fox" and Side B is "I Love To Sing-a-Fox Trot". both are performed by Jim Davidson & His New Palais Royal Orchestra with Vocal Chorus.C22871gramophone-record music davidson-jim dance-music -
Bendigo Military Museum
Photograph - PHOTOGRAPHS WW1, Bartlett Bros et al, c.1915-18
Michael Sydney Boyle No 3464 enlisted in the AIF in 8th reinforcements 21st Batt AIF on 12.7.15 age 26 years 2 months. Embark for Eygpt 29.12.15, transfers to the 60th Batt 26.2.16, promoted to Sgt 22.3.16, hospital 15.4.16 (unclear), embark for France 22.6.16, WIA 19.7.16 GSW to left elbow. Transfers to 17th Field Ambulance, embarks for France again 28.11.17, appointed acting CSM 19.1.18, transfers to No 1 A.C.D and reverts in rank to Sgt 18.4.18, discharged from the AIF 14.7.19. Frank Vincent Boyle No 3463 enlists in 8th reinforcements 21st Batt AIF on 17.7.15 age 20 years 8 months. Embarks for Eygpt 29.12.15, transfers to 60th Batt 26.2.16, promoted to Sgt 25.3.16, embark for France 22.6.16, WIA 19.7.16 GSW right ankle and left thigh, returns to Australia 22.2.17, discharged from the AIF 25.5.17. James (Jim) Munro Matheson Boyle No 5955 enlisted in 12 reinforcements F.A.B 2 on 12.7.15 age 25 years 2 months. Embarks for Eygpt 9.11.15, transfer to 5th Battery F.A.B 19.1.16, embark for France 22.3.16, promoted Bombadier 5.11.16, hospital 25.6.17 with Bronchitis, promoted CPl 30.10.17, promoted Sgt 5.11.17, hospital 11.3.18 with Haemoptysis, returns to Australia 6.6.18 classed with Mediastinal tumour, discharged from the AIF on 21.2.19. .1) Syd Boyle standing in uniform, Sergeant stripes. On light brown card backing with darker brown scroll work around. Crown at top left side, lion at bottom centre. Sepia colour, .2) Oval shape re Frank Boyle in peak cap, Sergeant stripes. On brown card backing with raised relief around photo. Sepia colour, .3) Jim Boyle in uniform, peak cap, Corporal stripes, garden background. Black & white. On light fawn backing with ornate edging & ribbon at top..1) “To Mrs Ferguson from yours sincerely Syd Boyle” .2) “To Mrs Ferguson from yours very sincerely Frank Boyle” .3) “To Mrs Ferguson from yours sincerely Jim Boyle”photography - photographs, boyle brothers -
Melton City Libraries
Photograph, Mock Debutante Ball guests, 1968
Left to Right: Allister and Sonia Newlands, Graeme Wood, Ian Hurley, Bev Gillespie, Rob Radford, Graeme Gilland and Peter Barrielocal identities, emergency services -
Flagstaff Hill Maritime Museum and Village
Instrument - Calipers, 1930-1955's
This set of calipers was used for measuring widths or thicknesses in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This calliper is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This calliper was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage.Calipers, metal, two curved arms joined at the top to open and close. Spot of orange paint on one arm. Used to measure thickness of materials. This set of calipers is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, technical drawing instrument, calipers for drawing and measuring, measuring instrument, sovereign of the sea, ship model, hobby, ship model tool, english war ship, calliper, callipers -
Flagstaff Hill Maritime Museum and Village
Tool - Chisel, 1930-1955's
This Screw brand chisel was made by Charles Taylors (Sheffield Tools) Ltd of England. It was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This chisel is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This chisel was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Small chisel, 7cm at cutting surface, made of cast steel with wooden handle. Brand is ‘Screw’, made by Charles Taylors (Sheffield Tools) Ltd. of England. This chisel is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. "Screw" Brand Superior Quality. Charles Taylors (Sheffield Tools) Ltd. England” and “Cast Steel England”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, chisel, hand tool, screw brand chisel, charles taylors (sheffield tools) ltd of england, woodworking tool, carpentry tool, sovereign of the sea, ship model, hobby, ship model tool, tool -
Bendigo Historical Society Inc.
Document - NEWSPAPER CUTTING: JIM PURDY, 1980
Newspaper cutting re Jim Purdy (Supplement to the Bendigo Advertiser - no date, but handwritten on page is ''1980's''. Section called 'Profile' giving the life story of Jim Purdy as ''Jim's Memories''.Bendigo Advertiserperson, individual, jim purdy -
Flagstaff Hill Maritime Museum and Village
Functional object - Brush, 1930-1955's
This fine Reeves paint brush was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. REEVES - Reeves & Sons Ltd, makers of fine art supplies, operated under this name in London, England, 1891-1976. The company was founded as Thomas Reeves and Son in 1784. SOVEREIGN OF THE SEAS - Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This brush is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This brush was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Paint brush, narrow ‘0’ size, Reeves brand, no. 157, made in England. Inscription printed in silver paint. This paint brush is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. Printed on handle -“MADE IN / ENGLAND” , “REEVES”, “157”, “0”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, paint brush, reeves of england, sovereign of the sea, ship model, hobby, ship model tool, brush -
Melbourne Legacy
Document, Constitution
A summary of important decisions made at Annual Conferences from 1926. The document appears incomplete as it starts at section ii). ii) Constitution (pages 1, 1a, 1b, 2, 3, 3a, 3b) iii) Junior Legacy Club - Employment (page 4) iv) Intermediate Legacy Club (page 4) v) General. Frequency of Conferences (page 5) / Burial service (page 6) / Interclub transfer (page 7) / Imperial extension of Legacy (page 7, 8) / War history in schools (page 8 9) / Womens' Clubs (pages 10, 11) / Policy of Legacy Clubs (pages 11, 12) / 20th Anniversary of Anzac (page 12) / Defence / 'Carry On' Clubs (page 13) / Proceedure (page 14) It was stored with other historical documents that had been marked with 'H' and a number, they were all part of the archive project that was trying to capture the history of Legacy. A record of successful motions made at annual conference on a variety of topics.White foolscap file copy paper with black type x 19 pages of a summary of past conferences and the resolutions passed at each.Handwritten 'L/ Gillespie' in pencil on top right corner of first page.history, conference -
Bendigo Historical Society Inc.
Document - DROUGHT AND IRRIGATION DEVELOPMENT IN THE NORTHERN PLAINS
Typed , stapled 3 page Document, Drought and Irrigation Development in the Northern Plains, Reporting from the 1860's -1916.Jim Rorkedocument, names of bendigo pioneers, bendigo -
The Foundling Archive
Photograph- W.Sydney
This photograph is part of the West Sydney Collection which depicts the period around Second World War in Australia from the perspective of a young unknown woman.PhotgraphJim and friendssecond world war; brother;jim; friends; west sydney; australia: 1940's -
Flagstaff Hill Maritime Museum and Village
Instrument - Calipers, 1930-1955's
This set of calipers was used for measuring and marking in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This calliper is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This calliper was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Calipers, metal, two arms joined by hexagonal bolt. Made by Moore & Wright, Sheffield, England. Maker’s name pressed into metal on arm. Use to measure thickness of materials. This set of calipers is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. “MOORE & WRIGHT / SHEFFIELD ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, technical drawing instrument, calipers for drawing and measuring, moore & wright of sheffield england, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument -
Flagstaff Hill Maritime Museum and Village
Tool - Chisel, 1930-1955's
This chisel was specially modified to be used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This chisel is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This chisel was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Grooving chisel, metal blade and turned wood handle. Round wooden handle has been bent and cut on one side so that it can be used in small difficult areas. This chisel is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, chisel, sovereign of the sea, ship model, hobby, ship model tool -
Melbourne Legacy
Photograph, Anzac commemoration for students 1938, 1939
A Legacy ceremony at the Shrine of Remembrance. One of the annual "Anzac Commemoration Ceremony for Students" events, usually held just prior to ANZAC Day. The ceremony provides a valuable opportunity for students to gain an appreciation of the Anzac spirit, the significance of the Shrine and the meaning of Anzac Day. The photos shows a crowd of school children facing the forecourt of the Shrine with many assembled on the steps. It appears there was a flagpole erected in the forecourt. The photos were in an envelope from The Argus and The Australian newspaper, addressed to Legatee Gillespie. Items were in an envelope with other photos and programmes from different School Student ceremonies. Labelled S15 in red pen it was part of an old archive numbering system, that showed there has been efforts in the past to collect, order and save items of Legacy's history.A record of a ceremony for school students at the Shrine.Black and white photo x 3 of an Anzac Commemoration Ceremony for students at the Shrine in 1938 and an envelope from The Argus newspaper.Photos are printed as Postcards and stamped with blue copyright stamp of Herald Feature Service. The envelope has a typed address to Mr. Gillespie, 370 Little Collins St, and a hand written note "Legacy Shrine Ceremony 1938" in blue pen.anzac commemoration for students, wreath laying ceremony -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Photo
Photo Jim & Fred Pringlephoto, general -
St Patrick's Old Collegians Association (SPOCA)
Photograph - SPOCA, Annual Dinners
-
Bendigo Historical Society Inc.
Photograph - BHS COLLECTION: JIM EVANS, 2009
Coloured photograph of Jim Evans standing in front of a photograph of Charles Thatcher at the Shamrock Hotel. Jim is dressed as Charles Thatcher.Daryl Pinder -
Port Melbourne Historical & Preservation Society
Photograph - Group of men and one woman entering a building, Tom Hills Archive
Photograph of a group of men and one woman entering a building, and noted on the back - Jim Healey, Jim Young, Tom Nelsonsocieties clubs unions and other organisations, piers and wharves - waterside workers, transport - shipping, tom hills, waterside workers federation of australia, jim healey, jim young, tom nelson -
Flagstaff Hill Maritime Museum and Village
Instrument - Set Square, 1930-1955's
This set square was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. James Bernard Williams was known as Jim Williams, born 1888 at The Forth and died 1959 in Warrnambool. He was a passionate ship model builder. Jim left school at the age of 14 years to work at the Don Store in Ulverstone, Tasmania. He played piano at the silent pictures. He enlisted and fought in France along with his two brothers and was wounded there. On return to Tasmania he found it difficult to get employment. He moved to Warrnambool and worked in the menswear department at Cramond & Dickson clothing store, corner of Timor and Liebig streets, until the Depression, when he lost his job. After some time unemployed and working part time until 1932, Jim was employed at Fletcher Jones Menswear in Warrnambool. In 1957 Fletcher Jones invited Jim to write out a list of the most interesting details of the ship model Sovereign of the Seas, with the view of displaying the model and the information for a short time in the factory and then move it to the display window of the Fletcher Jones shop in Warrnambool. Jim worked there for 27 years until just before he died in 1959. His Retirement Speech letter and a Staff Photo from Fletcher Jones are included with the donation. ABOUT JIM’S MODEL MAKING For many years Jim worked on his model ships, including The Endeavour and The Sovereign of the Seas. He had a table set up in a bay window and worked on them on and off using a jeweller's eye glass on the finer pieces. He was a real perfectionist and would re-carve pieces many times until he was happy with the results. This set square is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This set square was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Set square; thin, flat metal blade with rounded corners set at a right-angle into timber stock using three rivets, each with a diamond shaped surround. There is a remnant of red paint on the timber and signs that the set square has been well used. This set square is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, technical drawing instrument, set square, carpenter’s square, drawing instrument, drawing tool, technical drawing tool, sovereign of the sea, ship model, hobby, ship model tool, english war ship -
Port Melbourne Historical & Preservation Society
Letter - Mayor, Cr Jim MITCHELL declaring Port Melbourne a nuclear free zone, 1979
Photocopy of letter sent by Mayor Cr Jim MITCHELL declaring Port Melbourne a nuclear free zone 1979piers and wharves - station pier, public action campaigns, james malcolm (jim) mitchell, perce mcguire white, perce white, nuclear free zone -
Rutherglen Historical Society
Microfiche, Corporation of the President of the of Jesus Christ of Latter Day Saints, Family Register Index, 1987
Identity the families registered with the Church of Jesus Christ of Latter Day Saintssmall sheet of film Alphabetical Index GILLESPIE - NEAL Church of Jesus Christ of Latter Day Saintsfamily, register, alphabetical -
Melbourne Legacy
Letter, (H9), 1937
These two letters discuss the secretarial requirements of Legacy in the 1930s. One is a letter to Legatee Os Gawler outlining the costs incurred by the Board of Management General Fund for the past 3 and half years that related to the secretarial fees of Miss Wheeler and stationery and phone expenses. It was written in response to a request by the President. The second letter shows there was a resolution a couple of weeks later that the Board moved to appoint a sub committee. The sub committee consisted of Legatees Gillespie, Russell, Cremor, Parkes, Birrell, Kemsley, Meldrum and Gawler. The sub-committee decided that the co-ordination of the club was best served by a paid male Assistant Secretary and Employment Officer who would be responsible for all the administrative and employment work, assisted by a typist. Also that when that was enacted the services of Miss Wheeler and Mrs Andrews were no longer required. These documents show that the club had recognised the need for paid assistance in their administration. The notation H9 in red pen shows that it was part of the archive project that was trying to capture the history of Legacy. A notation on the back says: 'Appointment of first paid Secretary of Melbourne Legacy'.Very early documents that document the activities of the Legacy club and its expenditure. White quarto letter with black type x 2 pages about secretarial requirements and letter about expenses of Legacy Club written in 1937 x 5 pages.Handwritten H9 in red pen. 01482.1 some pencil notations and signed James G Gillespie in fountain pen. 01482.2 has underlining of dates and figures in red pen and signed ? Wallace Hon. Treasurer.history, organisation structure -
Stawell Historical Society Inc
Book, History of the Stawell Timber Industies Pty Ltd, September 2013
By Stewart Brown. Compiled by Jim Melbournestawell timber -
Ballarat RSL Sub-Branch Inc.
Photograph - ANZAC Day 1997
Jim WALLACE & grandson, Christopher WALLACEphoto/pictures, ballarat rsl, ballarat -
St Patrick's Old Collegians Association (SPOCA)
Photograph - SPOCA, Annual Dinners
-
St Patrick's Old Collegians Association (SPOCA)
Photograph - SPOCA, Annual Dinners
-
Melton City Libraries
Photograph, Charles Ernest and Jessie Barrie with family, Unknown
This document is has been compiled by Wendy Barrie daughter of Ernest (Bon) and Edna Barrie and granddaughter of Charles E and Jessie M Barrie. I was born in during WW 11 and the first child of my generation to live on the ‘ Darlingsford’ property at Melton. My grandfather was well known in the district and was mostly referred to as Ernie. He shared the same initials as his second son Edgar. His three eldest sons lived and farmed in Melton for their entire lives. His descendants are still associated with farming, engineering and earthmoving in Melton. Ernie Barrie operated a travelling Chaff Cutter in the St Arnaud area where his parents William and Mary Ann had taken up land at Coonooer West in 1873. Ernie commenced his working life with a team of bullocks and a chaff cutter. The earliest connection he had with Melton was in 1887. By the beginning of the 20th century Ernie and his father William and brothers, William, Samuel, James Edwin,[Ted] Robert, Arthur and Albert have been associated with farming and milling in the Melton district. In the early 1900’s Ernie and his brother Ted were in partnership in a Chaff cutting and Hay processing Mill on the corner of Station and Brooklyn road Melton South. The mill was managed by William for a time. By 1906 Charles Ernest and James Edwin were in partnership in the Station Road mill when a connecting rail line across Brooklyn Road for a siding was constructed to the Melton Railway Station. In 1911 the Mill’s letterhead shows C.E. BARRIE Hay Pressing and Chaff Cutting Mills. Melton Railway Station. Telephone No 1 Melton. This Mill as sold to H S K Ward in 1916 and stood until 1977 when it burnt down in a spectacular fire. Ernie built a house at Melton South beside the Chaff Mill at Station Road in 1906 and married Jessie May Lang in August at the Methodist Church. Jessie’s father was Thomas Lang. He came to Melton in 1896 and was the Head Teacher at Melton State School No 430 until he retired in 1917. They had 9 children with 8 surviving to adulthood. Jessie and Ernie had 6 sons and 3 daughters. All the children lived at Darlingsford. In April 1910 the family left Melton for a brief period and moved to a farm in Trundle in NSW. They returned to Melton and purchased Darlingsford in May 1911. For a time during WW1 they lived at Moonee Ponds near the Lang grandparents at Ascot Vale. Mary and Bon attended Bank St State School. The children developed diphtheria in 1916 and their youngest boy, Cecil died of complications. Mary and Bon were taken to Fairfield Hospital and both recovered. At the end of the war influenza broke out the family returned to Darlingsford and shared the home for a short while with the Pearcey family who had been working the farm. By 1922 the family had and grown and Edgar, Tom, Horace, Jessie, Joyce and Jim were living a Darlingsford. Ernie continued during the 1920’s working the farm and attend his many civic and community commitments. Two 8 clydesdale horse teams were used to work the land which meant early rising for the horses to be fed and harnessed to commence the days work. In 1916 Ernie also became involved in a Chaff Mill on the corner of Sunshine and Geelong Road West Footscray, which at the time was being run by John Ralph Schutt. It was known an Schutt Barrie. A flour mill was added at a later stage. Other Schutt and Barrie mills were situated at Parwan and Diggers Rest. Another mill was situated beside the railway line at Rockbank. The Footscray mill ceased operation in 1968 Ernie spent a lot of time and energy at the Parwan Mill and travelling around Parwan and Balliang farms, where he came to know many of the families in the district. Ernies commitment to the civic development to the Melton and district was extensive, he was involved with a number of large events during the 1920’s such as the Melton Exhibitions and the 1929 Back to Melton Celebrations. He was a member of the Australian Natives Association at the turn of the century. He was Chairman of the School Committee at Melton State School 430 and the Melton South State School in thw1920s. He donated the land for a Hall for Melton South in 1909, known as Exford Hall and later in 1919 renamed Victoria Hall. The Hall was demolished in 1992. He was a Councillor, JP, and Vice President and President of the Melton Mechanics Institute Hall Committee in 1915- 1916. He was a member of the Methodist Church and later the Scots Presbyterian Church. He was Superintendent of the Sunday School of the Methodist Church to 1910 and later Scots Presbyterian Church until 1931. This is reflected in the theme of children in the stained glass window which was dedicated in his memory by his wife Jessie as a gift to the Scots Church. Charles Ernest Barrie made many generous donations to many charities who supported young people and children. In 1918 Jessie and Ernie made the first donation to a very prominent Victorian charity whose work still continues. Yooralla. In July 1931 Ernie’s untimely death was a major blow to the family and the Melton community. To this day people still vividly recall the day they lined the streets for his funeral. The day of the funeral is recalled as the day Melton stood as two of their prominent citizens who tragically died on the same day. Their eldest daughter Mary had married Keith Robinson in 1930 and had just moved to Heatherdale Toolern Vale with their year old baby son. Bon the eldest son was 22, Edgar 18, Tom 16, Horace 15, Jessie and Joyce 10 and Jim 8 years old. A heavy burden of responsibility fell on the shoulders of the two eldest children, Mary particularly for her mother and Bon stepped in assuming head of the family for his mother, brothers and sisters living at the Darlingsford homestead. In the early 1930’s the three eldest sons took on many of the Civic and Church commitments which their father had held. This community involvement extended well into the 1980s. In 1941 Bon married Edna Myers and they moved into a house shifted from Harkness Lane to Harkness Lane on the eastern section of the Darlingford property. Edgar married Margaret Hodgkinson a Primary school teacher at Melton in 1949 and they lived in the Darlingsford house. Earlier Tom married May Ferris and lived on the eastern side of Ferris Lane in the Ferris home. Bon , Edgar and Tom often operated as a team effort, in particular at harvest time when a larger team of workers was needed. The three farms cultivated wheat, barley and oats and supplied the Mill with sheafed hay. They continued using horse teams until mechanisation in the 1940’s made the horses redundant. By the 1960s their five sons continued with farming. Many loads of hay were transported to the Mill in Footscray. Well into the 1960s hired harvest hands along with agricultural university students were involved in bringing in he harvest. Stacking was an art form in itself and Tom held the expertise for building and shaping the sides and roof. The stacks built in the district each had their own unique shape and could be recognized by their builders. The Barrie brothers developed a mechanical fork lift for picking up complete stooks and moving them to be loaded to the elevator to build the haystack. The prototype built by Bill Gillespie was attached to a Bedford truck. Later refinements in a collaborative effort with the Gillespie brothers a multi pronged fork was attached to the front of tractor which was hydraulically operated to raise each stook onto trucks to be transported to the site of the haystacks. This method of handling sheaves significantly reduced laborious pitchforking individual sheaves. This invention was soon taken up by farmers far and wide and was a common sight in the district at harvest time in the stacking season. I recall visiting farmers calling in at the house at Ferris Road farm to inspect this break through invention. The Clydesdale horse teams were used into the 1940s but by the 1950s the Barries’ farms were fully mechanised. When the demand for sheafed hay declined other crops were introduced these included barley, lucerne, wheat and peas. Sheep were added to the mix in the 1950s in an attempt to keep the farms more viable. In the 1970s part of the Barrie’s farms were facing a major disruption with the impending compulsorily acquisition of a strip of land for the construction the freeway bypass, which divided access between the Darlingsford homestead with those on Ferris Lane. Charles Ernest Barrie and Jessie May Lang's children: 1. Mary Ena BARRIE was born on 07 October 1907. She died on 29 April 1999. 2. Ernest Wesley BARRIE was born on 29 April 1909 in Ascot Vale, Victoria, Australia.He died on 25 December 1985 in Melton, Victoria, Australia. 3. Cecil William BARRIE was born on 23 February 1911.He died on 25 May 1916. 4. Charles Edgar BARRIE was born on 01 June 1913.He died on 06 October 1975. 5. Thomas Lindsay BARRIE was born on 25 November 1914.He died on 14 September 1990 in Melton, Victoria, Australia. 6. William Horace BARRIE was born on 11 October 1915.He died on 19 December 1950. 7. Jessie Maud BARRIE was born on 06 November 1920 in Bacchus Marsh, Victoria, Australia.She died on 26 February 1994. 8. Dorothy Joyce BARRIE was born on 06 November 1920 in Bacchus Marsh, Victoria, Australia.She died on 18 March 2003.. 9. James Edward BARRIE was born on 17 January 1922 in Bacchus Marsh, Victoria, Australia.He died on 23 August 2004Family Photo with Edgar, Tom, Mary, Ernest (Bon), Horace, Jim, Charles Ernest, Jessie and Joycelocal identities