Has a strong association with John Prisk, ESCo tram driver of the 1910's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a brass or metal backing with a gold (9ct) plating with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "John Prisk / Member / Since 1912". On the base of the badge has words "APFX 9ct" stamped into the bottom of the badge. See image files for front and back of badge. See worksheets in Reg. Item 3140 for details about Jack and his SEC driving career.tramways, trams, sec, drivers, esco, unions, badges, aeta, employees

Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented.Block with one remaining ticket - red ink on off white paper, denomination 2d, over stamped in black "Concession" numbered 685999A, headed State Electricity Commission of Victoria, Provincial Tramways. Originally a block of 200 tickets been stapled onto a plain cardboard back with a heavy metal staple and a off white coloured cardboard retaining strip at the top of the ticket. The ticket price is in red ink while the ticket number itself is in black ink. On rear in red ink is a diagonal criss cross or tartan pattern. See also Reg Item 3999 for another 2d Concession - but note difference check points on side of ticket. See Alan Bradley's notes "Fares in Ballarat" trams, tramways, secv, tickets

Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented.Block with three remaining tickets - light brown ink on off white paper, denomination 3d, over stamped in black "Concession" numbered A 74197 - 99, headed State Electricity Commission of Victoria, Provincial Tramways. Originally a block of 100 tickets been stapled onto a plain cardboard back with a heavy metal staple and a off white coloured cardboard retaining strip at the top of the ticket. The ticket price is in light brown ink while the ticket number itself is in black ink. On rear in light brown ink is a diagonal criss cross or tartan pattern. See also Reg Item 40001 for another block of 2d Concession tickets - block of 50. Note: "L.P.L." in bottom right hand corner of ticket. See Alan Bradley's notes "Fares in Ballarat" trams, tramways, secv, tickets

Yields information about the style and printing of tickets used in Ballarat and Bendigo tramways and how they were presented.Block with four remaining tickets - red ink on off white paper, denomination 2d, over stamped in black "City Section" numbered D907396 - 99, headed State Electricity Commission of Victoria, Provincial Tramways. Originally a block of 200 tickets been stapled onto a plain cardboard back with a heavy metal staple and a off white coloured cardboard retaining strip at the top of the ticket. The ticket price is in red ink while the ticket number itself and prefix is in black ink. On rear in red ink is a diagonal criss cross or tartan pattern. See also Reg Item 4002 for another 2d City Section ticket - block of 100 tickets and larger font for the price. See Alan Bradley's notes "Fares in Ballarat" trams, tramways, secv, tickets

Demonstrates uniform cap manufacture. Appears to be unworn.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 1/2". On the right hand side of the inside of the brown band, stamped in gold is the Australian Coat of Arms and the words "A quality product / made in Australia / by the Dept. of Supply". Appears never to have been used.tramways, trams, ballarat, uniforms, cap

Demonstrates uniform cap manufacture for a SEC Inspector and has a strong association with Theo Dunstan.A well used - SEC Inspectors/Conductors cap - black cloth exterior, grey cotton interior lining, brown leather internal hat band, on exterior with a plastic band at the front half of the cap terminating in two small SEC gold coloured metal buttons on either side, black plastic peak. Missing the Inspectors trip or "braid" Sewn to the inside top of the cap, a white label with red printing "Commonwealth Government Clothing Factories Melbourne" and stamped "6 5/8".tramways, trams, ballarat, uniforms, cap, inspectors

Set of five button badges produced by the Ballarat Tramway Museum for sale. Badges made with various coloured images of tram 31, with the words "Ballarat Vintage Tramway" around the edge of the badge and then pressed onto a metal back with a pin. Made by Patrick with their name and phone number stamped in to the centre of the rear of the badge. Have been made in a similar fashion since the mid 1970's for the BTPS/BTM. .1 - light green back .2 - white back .3 - pink back .4 - light blue back .5 - yellow back with a larger pin on rear and Patrick name not stamped into the centre. See Reg Item 6381 for a "Ballarat Tourist Tramway" example.tramways, trams, btm, sales, badges, ballarat vintage tramway

Demonstrates uniform cap manufacture, badge and has a strong association with a former Ballarat Driver - Jock Menzies.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak fitted with cap or badge No. 60, nickel plated silver, in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 3/8". See also Reg. Item 3044 for an ex Geelong cap.tramways, trams, uniforms, cap badge, cap

Yields information about the identification methods used by the ESCo to identify their crews to public and has a strong association with the individuals who wore them over time.Pressed metal uniform badge for ESCo Conductors. Round pressed steel badge with the words "ESCo OF V. LTD." pressed into the badge around the top portion of the badge, the word "CONDUCTOR" and number "13" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Appears to have had a nickel silver finish originally. On rear badge two metal lugs have been soldered onto the badge. Has words "STOKES & SONS" stamped in reverse on the lower rear of the badge. Badges of this type shown on ESCo uniforms of 1905 and through to the 20's. See Reg. Item 1952 and 5280 for Drivers badge. tramways, trams, esco, conductors, badges, uniforms

Yields information about the type and presentation of books or information folders that were sent to the Electric Supply Company of Victoria about tramway products available on the market and the company the produced them.Folder with 24 pages of advertising pamphlets bound into it with two metal clip binders advertising products available from the Railway Track-Work Company and titled ""Railway Track Equipment - Track Grinding Machines, Welding and Bonding Machines - Bonds, Welding Steel, Grinding Wheels and Blocks". Has brochures or pamphlets for: . The Universal Rotary Track Grinder . Reciprocating Track Grinder . The Atlas Rail Grinder . The Ajax Electric Arc welders .Vertical Rail Lifter . The Jackson Electric Tie Tamper. Generally the lead page of each pamphlet has been imaged. Provides a description of each item, along with method of operation and parts listing generally. The folder has on a number of pages and the back cover, a sticker from Frank R. Perrot (Now Perrot and Adams Ltd), Machinery Merchant of 394 Kent St Sydney. Railway Track-work Company , Clementine, Thompson and Mercer Sts, Philadelphia, Pennsylvania USA. For a full scan of the document see the hi res file.Numerous: Front cover sticky label "1620" in top left hand corner, "Mr Pringle" on front cover and stamp with words "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on front cover. Inside front cover has a pencil note, behind the crease in the bottom right hand corner. On the first pamphlet "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on top right hand corner. On parts page for the Reciprocating Track Grinder has the "Perrot and Adam Ltd" company stamp.trams, tramways, trackwork, equipment, rails

.1 - Book - 56 pages + grey covers, side stapled, issued by the British Engineering Standards Committee "Electrical Machinery excluding motors for traction purposes", No. 72-1917, September 1917. Has "Commonwealth Engineer" label along the bottom edge. .2 - Book 28 pages - light grey covers, side stapled, issued by the British Engineering Standards Association, "Insulating oils for use in Transformers, oil switches and circuit breakers" No. 148-1923, April 1923. Has a Tait Book Co. stamp along the bottom edge and ESCo date stamp 1 Oct. 1925. Printed by Gaylard & Sons London. .3 - Book 72 pages - light grey covers, side stapled, issued by the British Engineering Standards Association, "Tungsten Filament Electric Lamps" No. 161-1925, August 1927. Has a Tait Book Co. stamp along the bottom edge and ESCo date stamp 15 Feb. 1928. Printed by Waterlow & Sons London. .4 - Book 48 pages - light grey covers, side stapled, issued by the British Standards Institution, "Metal Sheathed paper insulated plain annealed copper conductors for electricity supply including voltage tests" No.1 48-1933, March 1933. Has a Tait Book Co. stamp along the bottom edge and ESCo date stamp 15 Feb. 1928. Printed by Waterlow & Sons London. trams, tramways, power station, standards, materials, electrical systems

Demonstrates the style of sales item produced by the BTPS.Button badges produced by the Ballarat Tramway Preservation Society for sale. Badge made with green coloured image of tram 31, with the words "Ballarat Tourist Tramway" around the edge of the badge with a yellow background. Pressed onto a metal back with a pin. Made by Patrick Brothers with their name stamped in to the centre of the rear of the badge. See Reg Item 3383 for a "Ballarat Vintage Tramway" example.tramways, trams, btps, sales, badges, ballarat tourist tramway

A first aid box, rectangular shaped metal box 180mmHx265mmWx215mm D, painted black, hinged lid with 2 hinges, metal carrying handle on top, and metal locking clasp on the front. Has a white sticker with first aid written in red on the lid, and a gold SECV transfer. On the front of the box, below the locking clasp are the numbers "2787" in a gold transfer. Inside of box is gloss white, there are four metal brackets to hold some kind of partition. In the lid a four brackets to hold some kind of implement, and four corner brackets (similar to photo mounts) to hold something. There is a "B" written in top left inside corner of the lid and next to that a rubber stamp imprint with the date "16 April 1970".First aid sticker on lid, SECV logo transfer on lid, Number 2787 in gold transfers on the front, "B" written inside lid, and date stamped "16 April 1970" left hand top corner, inside lid.trams, tramways, ballarat equipment, ballarat depot, first aid, safety, secv tramways

All tramway platform crew were issued with a cap and were expected to wear it at all times. Demonstrates uniform cap manufacture.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic beak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 3/8".btm, ballarat tramway museum, conductors, conductors hat, uniforms, sec, conductors cap, motormen, drivers

Each crew member was issued with a series of tins, A, B and C which allowed for the various days and weekends to enable Revenue Clerks to accept returns and restock the tins with new tickets etc.Has a strong association with tram crews and the ticket / revenue collection system. Metal box formed from four sheets of metal, spot welded together with a formed lid, hinged to box and fitted with a hasp and staple. Stamped with red lettering reading "D81". btm, ballarat tramway museum, conductors tin, fares, tickets

This seal press was used by the City of Sandringham to emboss agreements and official documents. Cast iron seal press, with wooden handle at angle to metal compartment. Gilded decorative treatment on black, with red line beneath gilding around the base. Round die still attached for City of Sandringhamseal press, seal, die, city of sandringham, sandringham, council, writing accessory, stamp, press, bayside

During WW2 headlight covers were used for night driving during brown out periods. They were compulsory from late 1941 to the end of 1943 when it was thought that the danger of invasion had passed. They were designed to restrict the amount of light emitted by cars and vans.Head light covers used during WW2. Small rectangular opening to allow a sliver of light to shine at night .Metal round piece with metal shade for headlights to point to the ground. Originally painted black.Stamped Lucasww2, blackout, cars

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Expandable wood and metal shoe stretcher. The expansion is controlled by a coiled spring. The name of the manufacturer is stamped on the toe section.FLARTA shoe expanders, flarta

A transitional flat-top, wooden racquet with a laminated convex throat. Decal inscription of model type around crown on obverse: TRIUMPH. Decal of company trademark features on throat on obverse. Within a football device is the inscription: TRADE MARK/SCHMELZER'S/KANSAS CITY/SPORTING GOODS. Stamped inscription along right side of stem: THE/SCHMELZER COMPANY. Materials: Wood, Gut, Metal, Ink, Glue, Lacquer, String, Leathertennis

An oval, wooden racquet with a laminated concave throat. Decal of company trademark features on throat of obverse. Within a football device is the inscription: TRADE MARK/SCHMELZER'S/KANSAS CITY/SPORTING GOODS. Stamped inscription along right side of stem: THE/SCHMELZER COMPANY. Materials: Wood, Gut, Metal, Ink, Glue, Lacquer, Stringtennis

A wooden, transitional flat-top racquet with a laminated, convex throat, and a finely grooved, bulbous handle grip. Across the throat on the obverse is a decal of the model 'AS[HBY]' above the Bliss company trademark of a 'B' linked to an anchor, within a shield device. Around the crown on the obverse is the barely legible decal inscription, in blue: EXPERT. On right side of handle is stamped the barely legible inscription: ORIENTAL GUT. Materials: Wood, Gut, Ink, Metal, Glue, Lacquertennis

A wooden, transitional flat-top racquet with a solid, convex throat, and a plain handle. Across the throat on the obverse is a decal of the model 'HARVARD' above the Bliss company trademark of a 'B' linked to an anchor, within a shield device. On right side of handle is stamped the barely legible inscription: ORIENTAL GUT. Materials: Wood, Gut, Ink, Metal, Glue, Lacquer, Leather, Painttennis

A wooden, transitional flat-top racquet with a solid convex throat, and fine grooved handle. Manufacturer's mark stamped across throat on obverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Stamped model name along stem on obverse: THE RENSHAW. Stamped inscription across throat on reverse: BENETFINK/LONDON. Materials: Wood, Gut, Leather, Metal, Glue, Lacquertennis

A wooden, flat-top racquet with a solid convex throat, and fish-tail handle. Model trademark is a stamped on throat on obverse, featuring a horned demon's head, with the text: THE/DEMON. Manufacturer's mark stamped across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Stamped over this: BENETFINK/LONDON. Materials: Wood, Gut, Metal, Glue, Lacquertennis

A wooden, transitional flat-top racquet with a solid convex throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: SPECIAL DEMON. Model trademark is a stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturers name along stem on obverse: SLAZENGER + SONS. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tapetennis

A wooden, oval racquet with a solid convex throat, cloth tape supports, and fish-tail handle. Model trademark is a stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Inscription, probably place of manufacture, stamped across throat on reverse: MURTON/NEWCASTLE. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tapetennis

A wooden, oval racquet with a solid convex throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: THE DEMON. Model trademark is stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturer's mark stamped across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Inscription along left side of handle: MADE IN ENGLAND. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tapetennis

A wooden, oval racquet with a solid convex throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: THE DEMON. Model trademark is stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturer's mark stamped across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tapetennis

A wooden, oval racquet with a concave throat, cloth tape supports, and fish-tail handle. Inscription across crown on obverse: THE DEMON. Model trademark is stamped on throat on obverse, featuring a horned demon's head device, with the text: THE/DEMON. Manufacturer's decal trademark across throat on reverse, comprises of a hexagram with the text: BEST IS BEST/S&S/L/THRO' THE WORLD. Retailer's decal below: LISLE FRASER/WHOLESALE/AND/RETAIL/SPORTING GOODS/... Inscription stamped along left side of stem and handle: SLAZENGERS (CANADA) LIMITED...MADE IN CANADA. Materials: Wood, Gut, Metal, Glue, Lacquer, Cloth tape, String, Painttennis

A concave, wooden racquet, with white-painted cloth taped shoulders, with red and green whipping, diagonal stringing, and a fish-tail handle. On throat on obverse is the Slazenger trademark of a hexagram, with an 'S' in the centre. Barely legible inscription stamped along right side of handle: SL[AZENGER] LTD. Materials: Wood, Gut, String, Cloth tape, Metal, Glue, Lacquertennis