Unit badge mounted on wooden plaqueBadge - Square on blue background surrounded by the words (left) National 51, (top) Servicemen's, (right) Association 72, (bottom) Navy Army Airforce. (Central) Over map of Australia are the crown, crossed swords, eagle, anchor. Plate below badge reads - Eastern and Yarra Valley/ Sub-Branch/ Chartered 29 November 1998

Wooden plaque with badge RAEME Vietnam

The plaque is dedicated in appreciation to the Port of Melbourne from the Chartered Institute of Transport (Malaysia). The plaque is made of dark blue metal sheeting, engraved with white writing. At the top centre of the plaque is the large gold-plated seal of the Charted Institute of Transport, Malaysia which is dominated by a Pegasus. The plaque is backed by a wooden board painted back, which is hinged onto a red felt case. The hinging allows the plaque to stand up when the case is opened.THE CHARTERED INSTITUTE OF TRANSPORT MALAYSIA SECTION/ IN APPRECIATION/ THE CHARTED INSTITUTE OF TRANSPORT (MALAYSIA)/ STUDY TOUR/ TO/ AUSTRALIA - PORT OF MELBOURNE/ 1ST - 6TH MARCH 1991

Samuel Rosenthal enlisted in the 6th reinforcements to the 58th Bn AIF on 20.7.15 age 33 years 8 months. Promoted to 2nd Lieutenant 17.1.16, embarked for England 2.10.16, hospital 27.1.17 serious, promoted Lietenant 15.7.17, KIA 25.9.17. Refer 1019, 1020.Commemorative Plaque, round, Bronze, has Brittanica with a lion with a rectangular space for a name. Around the outside of the plaque "He died for Freedom & Honour"."Samuel Rosenthal"death penny, metalcraft, bronzeware, memorial plaque, military history

Photograph taken at unveiling of plaque at site of former Narrewillock State School No 2204 coloured photograph Ten former pupils beside plaque

Shield shaped plaque made of varnished timber. Affixed to the front of the plaque is a metal badge that has been painted red white and blue. 1 RECRUIT TRAINING UNIT ROYAL AUSTRALIAN AIR FORCE ACCROSS THE THRESHOLD raaf, recruit, plaque, badge, wark vc club

Shield shaped plaque made of varnished timber. A large RAE badge is affixed to its centre above a rectangular enscribed brass plaqueIN APPRECIATION OF RANGE REPAIRS MAY 1984 PRESENTED BY BRIG.P.G.A. EVANS & EDE STAFFrae, engineers, plaque, hat badge, wark vc club

former property of the Swann ClubLarge shield shaped varnished wooden plaque with scalloped top. 4th Brigade crest mounted in the middle and brass rectangular engraved plaque.The Brigadier's Shield for the best rifle company exercise forthright defender Puckapunyal 19834th brigade, swann vc club, support company, wark vc club

58/32 Infantry Battalion with the red coloured wood on background on the centre of the plaque. It has the writing "City of Essendon Regiment" in the centre of the plaque.

The plaque is made of very dark wood, the symbol of the tiger and the crown is on the shield of the centre of the plaque. The writing "The Royal Leicestershire Regiment" is in the centre bottom.

Rectangular plaque states, 'In memory of Capt. I. N. Macfarlan (1919-1995). Plaque features a raised border around the edge and two screw two screw holes at back. Text is cast into the plaque with a brown, mottled background surrounding. IN MEMORY OF/ CAPTAIN I. N. MACFARLAN/ (1919-1995)/ FOR HIS SERVICE TO THE/ PORT OF MELBOURNE (1950-1982)/ AND AS/ HARBOUR MASTER (1973-1982)/ Placed by the/Company of Master Mariners and/ The Port of Melbourne Authority. on verso: ROESZU72?/363485/25/7 (marker) PMA1531 (B72)

Brass plaque mounted on timber. Plaque states ' this plaque, commemorating 125 years of State Education at Golden Square Primary School No 1189 was unveiled by Hon Ron Best M.L.C., member for North Western province on 10th. October 1998.bendigo, education, golden square primary school

This ship was number 1 of 2 ships named Bangalore and run by P & O. This ship has listed the same tonnage as that on the inscription on the frame of this work. The ship was subsequently sold in 1886 sold to Hajee Cassum Joosub and used for passengers on pilgrimage into Jeddah. Another view of the history of the Bangalore is that to be found at the Maritime Museums of Sydney listing of another painting of the Bangalore which provides a somewhat different history. It is possible that the story of Bangalore 1 and Bangalore 2 have become conflated further research is needed to verify. see Links field. SS BANGALORE was built in 1867 by William Denny of Dumbarton. Owned by P&O, SS BANGALORE operated from Bombay and Galle to Melbourne and Sydney from 1872 to 1886 as a passenger and mail ship. In 1891 BANGALORE was sold to Wilh. Wilhelmsen, Norway and renamed SS CORINGA.Marine art, Maritime artP&O S.S. Bangalore by George Frederick Gregory (1821-1887)Thinly painted image on board featuring centrally a moored, at anchor, 19th C dual masted steamship with black funnel and flying at the stern a red ensign. To either side are conventional rigged clippers or sailing ships. Near the bow of the steamship there seems to be a tug or paddle steamer face on. In the foreground is a small rowing boat with boatman and two passengers, a male and a female. The painting on board is mounted in a large polished or varnished cedarwood frame with edge carving and a decorative pitted slip which holds in place a thin piece of glazing. Backing paper and seal has all been removed except for hanging wire. Central at front lower edge of frame is a small chipped wood plaque with inscription.Painted in black on plaque and coloured black: "P & O S.S. "BANGALORE" / 2342 tons Built 1867"s.s. bangalore, marine painting, sailing ships, 1867, william denny, artwork-paintings, peninsular and oriental steam navigation company, steamship, p&o, sandridge, port melbourne, hobson's bay, charles dickson gregory, centenary maritime exhibition, george frederick gregory (1821-1887), ss bangalore

Rev Marlene Thalheimer was inducted as the first female minister in the Presbyterian Church in 1974.G146.1 Black leather-look hinged box with two clips and a handle at the top. The box is lined with white satin in the lid and blue velvet in the box. The contains: G146.2 communion chalice; G146.3 and G146.4 patens; G146.5 - G146.8 two lidded communion wafer containers; G146.9 plastic communion wafer container with wafers; G146.10 oblong tray with central handle containing G146.11 - G146.18 eight communion glasses. The boxed with fitted out to hold all these items together with a bottle which is missing. The box has two plaques on its front.Plaque on lid: ""PRESENTED TO REV. M.J.THALEIMER WITH APPRECIATION BY ST JOHN'S PRESBYTERIAN CHUIRCH ESSENDON - 1974 - "" Plaque on box: "PRESENTED TO ST JOHN'S UNITING CHURCH ESSENDON - 1991 - BY ROY, HUSBAND OF THE LATE REV. M.J.THALHEIMER A MINISTER OF ST JOHN'S THE FIRST ORDAINED WOMAN MINISTER OF THE PRESBYTERIAN CHURCH OF AUSTRALIA"rev m. j. (polly) thalheimer, st john's presbyterian church essendon, st john's uniting church essendon

Colour photograph group of people on foreshore inspecting the plaque, following the unveiling of the World War 1 memorial sculptures plaque. Lakes Entrance Victoriamemorials, world war 1914-1918

2nd Training Group has been disbanded 2nd Training Group Plaque, contains the symbol of the 2nd Training Group and the writing "training group", its symbol is fixed onto the wood plaque

The unit has since been disbandedthe Plaque of the 1st Battalion Royal Victorian Regiment. The size of the unit symbol is in a blue plaque shaped back ground, and its fixed on dark wood

This nameplate was attached to the steel steamer Matthew Flinders I, a Suction Hopper Dredge used for pumping up sit and sanding from seabeds. It was donated by the Marine Engineer, Neville Dodds, from Ports and Harbours, from the Matthew Flinders I. The Matthew Flinders was constructed by Morts Dock & Engineering Coy. Ltd in Sydney, New South Wales. Identified as Ship No. 40, the dredge had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered in 1917 at the Port of Melbourne by the owner, the Department of Public Works in Victoria. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933. 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This nameplate is significant for its association with the suction hopper dredge Matthew Flinders I, which was used to remove the build-up of silt and sand from the Warrnambool Harbour, allowing shipping activities to continue to operate in the Port of Warrnambool. The nameplate identifies the vessel and shows that it was built in Australia in the early 20th century for use within Australia. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Brass nameplate, rectangular with cut-away corners and moulded text, mounted with screws on timber. The plate is from a vessel, the dredge Matthew Flinders I, ship no. 40, built by Morts Dock & Engineering Coy Ltd in Sydney, and registered in 1917. A small rectangular engraved plaque below the nameplate gives further details of the ship and the donor.On nameplate: "MORTS DOCK / & / ENGINEERING COY. LTD. / SHIP BUILDERS / SYDNEY 1917 / SHIP NO 40" On small plaque: "Donated by / NEVILLE DODDS / PORTS & HARBOURS / MARINE ENGINEER / EX "MATTHEW FLINDERS I"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, dredge, mathew flinders i, steel steam ship, twin screw engines, nsw, state of victoria, suction hopper, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, captain dunbar, ship no. 40, niville dodds, ports & harbours, marine engineer, marine technology, ship relic, percy taylor, matthew flinders, pioneer

Trench art was typically made by soldiers from pieces of shell and shrapnel, which would have been collected and refashioned into many different objects ,some being of a functional type such as containers and holders while others such as this are more decorative. The maker of this art piece was Stanley Morgan 6383 who was born at Mepunga which is East of Warrnambool.This item has significance being a typical example of trench art which has survived over 100 years. Being linked to one of the largest conflicts in which Australia has engaged it has strong historical significance.This model is constructed of metal and wood. It has a propeller mount on either side of the cockpit with propellers front and back. It has two German crosses on the back and one on either wing.The body of the plane rests on four wheels which sit under the wings with two smaller wheels at the front.There is a gold coloured plaque mounted at the front. It stands on a modern wooden mount,On small plaque at front of mount,”Crafted by Trumpeter Stan Morgan France WW1. On the base of the mount on a small sticker,”Mr Lloyd Morgan 19 Mountfield Ave Malvern East Vic 3145warrnambool, trench art, stanley morgan 6383, morgan mepunga

Tim Walker’s work is an eye-catching array of shipwreck artefacts and associated items. They help tell the story of the 19th century ships that travelled across the world full of people and cargo that are now part of our history. The work was commissioned especially for Flagstaff Hill and highlights the famous story of the 1878 ‘Loch Ard’ shipwreck. The images also include two small items from the 1981 ‘Fiji’ shipwreck. Timothy “Tim” Walker was born in Britain in 1970. He is a self-taught artist who began with a desire to use his talents for full-time work. He moved to Warrnambool in 1990 and became involved in the Warrnambool and District Artists’ Society, where he has served for a period as President. In 2010 Warrnambool Art Gallery hosted an exhibition “Nine Lives” with works from nine local artists including Tim Walker. The ‘LOCH ARD’ 1873-1878 - brief history The clipper ship ‘Loch Ard’ was a built in Scotland in 1873. In 1978 the ship was sailing to Melbourne with 54 people on board as well as a mixed cargo of items, some of which were bound for the 1880 International Exhibition in Melbourne. On June 1st 1878 it was very close to its destination when it crashed into Mutton Bird Island, east of Port Campbell. Only two people survived. The wreck was re-discovered in 1967, almost a century later, and the site continues to provide evidence of the range of goods imported into the Colony of Victoria in the post-Gold Rush era. Flagstaff Hill divers in the 1970s reported finds of “Bottles of champagne, window panes, rolls of zinc, barrels of cement, iron rails, clocks, lead shot, corrugated iron, lead, marble, salad oil bottles, ink bottles, copper wire, gin bottles, rolls of carpet, floor tiles, copper rivets, gas light fittings, pocket knives, toys, crystal chandeliers, beer mugs, cutlery, candles sticks, wick scissors, cow bells, and sauce bottles.” The famous Loch Ard Peacock was also on board. The ‘FIJI’ 1875-1891 – brief history The barque ‘Fiji’ was built in Ireland in 1875. The sailing ship left Hamburg in May 1891, bound for Melbourne with a crew of twenty-five plus the captain. The ‘Fiji’ had almost reached her destination after a trip of 100 days at sea when, on September 5th 1891, she struck rock 300 metres from the shore at Moonlight Head, near Cape Otway. Eleven men lost their lives but with the help of locals including members of the Rocket Rescue Crew, the rest of the men were saved. In anticipation of Christmas, the cargo had included a wide variety of children’s toys, amongst which were dolls with china limbs, wooden rocking horses, miniature ships, and red and white rubber balls. There were also cases of dynamite, pig iron, steel goods, spirits, sailcloth, tobacco, fencing wire, concrete, 400 German pianos, concertinas and other musical instruments, artists’ supplies, porcelain, furniture, china and candles. This artwork has historical significance as it shows a small sample of the variety of items on board the late 19th century ships bound for Australia in the Colonial and late God Rush period. The cargo contained personal luggage, items intended as gifts, and goods ordered for domestic, commercial or industrial use. The wreck sites of both vessels, ‘Loch Ard’ and ‘Fiji’ are classified on the Victorian Heritage Register as significant and are now protected by government law. The sites are popular with divers and provide interpretive material regarding social and maritime history. Framed poster of a watercolour painting by Tim Walker, gilt frame, behind glass. Subject is a group of objects, most of which are connected with the 1878 shipwreck Loch Ard, such as items recovered from the shipwreck and the famous ‘Loch Ard Peacock’. Two items are from the wreck of the ‘Fiji’. Inscriptions on ingot, a handwritten letter, bell, clear bottle, and small plaque.On ingot: “PONTIFEX & WOOD. LONDON”. On letter: “Presented to Mr. Thomas Pearce”. On small ingot: “TIM WALKER”. On bell: “LOCH ARD”. On clear bottle “THE SINGER MANUFACTURING COMPANY“. On plaque: TIM WALKER”.warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, flagstaff hill, loch ard, fiji, watercolour, timothy walker, tim walker, warrnambool & district artists’ society, warrnambool art gallery, poster, henna street picture framers, cargo, print

Photograph - black and white photograph of three men at a presentation ceremony. Two Army personnel and one civilian with a certificate. Mount - Mid grey colour cardboard. Frame - timber with brown colour varnish and gold colour paint trim. Decorative moulding. Glass front, timber and paper backing. metal plaque - gold colour - on lower edge of frame with etched information.Information on plaque - etched black on gold. "PRESENTED TO/ BOBDUBI BARRACKS/ AFTER RESTORATION/ 3rd MAY 1989/ BY/ COMMANDING OFFICER/ LT. COL. DOUGLAS BALL/ 8TH/7TH BATTALION RVR"framed accessories, photographs, army, 8/7 rvr

WW1 Historical significanceNext of Kin Plaque: 6310 Pte H. McGregor. The round bronze Memorial Plaque shows Britannia and a lion on the front and bears the inscription 'He died for freedom and honour'. The full name of the dead soldier is engraved on the right hand side of the plaque. No rank, unit or decorations are shown, befitting the equality of the sacrifice made by all casualties. The shape and appearance of the plaque earned it nicknames such as 'The Dead Man's Penny, and the 'Widows Penny'. Plaque is still in it's original envelope addressed to Mr A. McGregor.Gunner H.G. McGregor.

In early 1974, as an Engineer with the Country Roads Board, David came to Orbost as the Supervising Engineer for the construction of the new bridges which were part of an 8.4km Orbost bypass road design. This was a major project involving not only a new bridge over the Snowy River (including Lochiel Lagoon), but other bridges over Ashby’s Gulch and Watt’s Gulch. These new bridges were opened in November 1976 with the unveiling of a plaque on the eastern end of the $2.4M Snowy River Bridge. The new bridge, built by the CRB at a cost of $2.4 million, is 1.6 metres above the record flood levels of 1971. (ref. May Leatch) This newspaper contains contemporary reports of a significant event in Orbost.A Snowy River Mail newspaper, dated 1.12.1976. It contains news articles, photographs and advertisements. The main article relates to the official opening of the Snowy River Bridge and the unveiling of a plaque on the eastern approach. It also contains a history of the first Snowy River Bridge.snowy-river-bridge orbost-bridges snowy-river-mail

Megger as the device was called, is in fact its brand name. It is a device that supplies a DC (direct current as per car batteries) voltage to enable testing of electrical apparatus. This particular device produces 250volts DC when the handle is turned vigorously. If an electrical device, such as a kettle or toaster, blew a fuse or tripped a circuit breaker, when switched on, then it must be checked electrically before any more use. Following the repair of the faulty item a megger would be used to check if either of the AC 240volt plugs leads were touching the metal case (earth). The output leads of the megger would be connected with one to the earth (metal case) and the other to each of the power connections in turn. A good megger reading of 50,000 ohms (resistance) would enable the device to be returned to service. A reading of zero ohms resistance would mean that it would again blow a fuse, and was therefore unsafe to use. In the electrical industry e.g. the former State Electricity Commission, a megger would be used to test lots of similar item in sequence. Because of the vigorous job of winding the handle, two persons were often used to save time. One would crank madly whilst the other shifted the leads. This particular megger is of a small voltage, but other meggers are bigger and have a few ranges of DC voltages able to be selected. The optimal megger for large Generating machines was motor driven megger. This was applied to the device being tested for a duration of approximately 30 minutes with reading of the resistance taken at regular intervals.All equipment belonging to the State Electricity Commission of Victoria was labelled with a metal plaque attached to it. The SECV constructed the Kiewa Hydro Electric Scheme in the Upper Kiewa Valley and on the Bogong High Plains. The scheme began in 1938 and finished in 1961 when this megger was used and also possibly later as the SECV remained to maintain and operate the Scheme. This megger is of significance in relation to the advancement of technology.A rectangular box in dark brown bakerlite casing. It has an agent's plaque fixed to the left of the face and on the right is the marker's recessed stamp. In the middle in a transparent window so the level of ohms can be read. The front also has two recessed fixing knobs in black. On one side is a crank handle with a knob that lifts up and is turned vigorously to create the voltage. The back has four recessed screws and four small leather pads. There is a hole on each side to insert wires. There are two copper insulated wires. The SECV Plaque states: State/Electricity Commission/of/Victoria/ Electrical Engineer's Section/ No.1747 The Agent's Plaque states: H. Rowe & Co. Pty Ltd/Melbourne & Sydney/Sole Agents/in Australia for/Evershed & Vignoles Ltd Maker's states: 500 volts/Megger/Regd Trade Mark/Made in England/Patent No/400728electrical meters, electrical equipment, fuses, safety, state electricity commission of victoria, mt beauty, bogong village

wooden Plaque 15cm x 13 cmThe NationalMalaya and BorneoVeterans Asn. Presented to this RSL for support of Gurka Trust UK from NMBVAA the nationalmalaya and borneoveterans asn. presented to this rsl for support of gurka trust uk from nmbvaa

Wooden plaque 15cm x 13 cmPacific Islands Regiment

Wooden Plaque 15cm x 13 cmRoyal Millitary College