This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417.A well-preserved ship’s deadeye with wire loop rope still attached. The original tar coating for water-proofing still remains, colouring the entire artefact black. It is wrapped in hessian cloth and hemp cord and is currently in storage under secure and stable conditions. This deadeye was recovered from the wreck of the LOCH ARD. The artefact is a typical deadeye, comprising a thick round wooden disc, pierced by 3 similarly sized and shaped holes from one flat side through to the other, in a triangle formation. The survival of the wire cable loop-rope suggests it was an Upper Deadeye, connected to the shrouds (mast rigging). Previous number PWO 2388.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, deadeye, loch ard, rigging

Thomas C Williams 1831 -89, Richmond Virginia USA. 1850 he formed a partnership with R.A. Patterson in a tobacco business which was very successful. The British-American Tobacco Company, Ltd., was established in 1902 by an agreement between the Imperial Tobacco Co. of Great Britain and its rivals, the American Tobacco Co. and its associates. The headquarters was located in London, England, and the office at 111 5th Ave. in New York City handled the purchase of leaf and manufacturing in the U. S. In 1903 the company acquired the formerly independent export businesses of the T. C. Williams Co., David Dunlop, and the Cameron family who were then the largest exporters of manufactured tobacco. T.C.Williams Co had been in existence for fifty years, and its export business in chewing tobacco amounted to nearly 5,000,000 pounds of tobacco a year.2 tins a) circular and b) rectangular with lift off lids that contained 'Welcome Nugget' flake cut tobacco made by T.C Williams Co.Top of Lid ; T.C WILLIAMS Co. / WELCOME NUGGET / FLAKE / CUT / TOBACCO. around lid WELCOME NUGGET FLAKE CUT HERMETICALLY SEALED. on base High / Grade / TOBACCO /Packed in a round airtight / tin to preserve the / original fine flavour / and to ensure / perfect condition / 2 0zs. NETT Factory weight / when packed.* tobacco, cigarettes, smoking pipes, t c williams co ltd, richmond virginia, moorabbin, cheltenham, bentleigh, the british-american tobacco company ltd., american tobacco company, cameron & cameron ltd., imperial tobacco company, patterson r a , williams thomas c snr.,

Biographical note: Fred Holt (1914-1993), a son of Edmund and Ruby Holt, joined the Bank of Australasia (now ANZ) as a clerk in 1933. His banking career was interrupted at age 26, in 1941 when he volunteered for services in the Royal Australian Navy. Fred Holt grew up in Surrey Hills; brother of Alan Holt. At the time of enlistment he was living with his parents at 9 beatrice Avenue, Surrey Hills. He married Euphemia Craig in 1945. This is a personal account of Lieutenant Frederick Sutton Holt's service in World War II from 1940 onwards, as a member of the Royal Australian Navy Volunteer Reserve. He served on HMS Terpsichore. He was mentioned in dispatches for skill, determination and bravery in anti-U-boat operations whilst serving with HMS Troubridge, Terpsichore and Vetch. (REF: Commonwealth Gazette 13/3/1945). A personal account of Fred Holt's service in World War II from 1940 onwards, as a volunteer in the Royal Australian Navy.Title page: signed Fred Holt(mr) fred s holt, great britain, royal naval, world war, 1939-1945, royal australian navy, navies, armed forces, returned servicepeople, frederick sutton holt, hms terpsichore

Before 1908 the words "melting pot" was a term relating to a "crucible" with a meaning of "a pot in which metals and other substances are melted (fused) to provide metal items of varying shapes and uses. From the mid 1900's this term changed and became more related to the "mixing" of social and ethnically diverse populations. The description used here is that of pre 1908. This melting pot was used in the early to late 1900's when produce and hardware shops were too far away from the Kiewa Valley and time was at the essence. The ability to manufacture as many "crucial " items at the home property was the difference between running a successful rural business or not. The isolation of the Kiewa Valley (before the 1950's), hindered the "time down" of machinery and important "widget" replacements. The ability of self sufficiency on properties is still a boon to rural properties as time lost is never really recovered.This melting pot is highly significant to the Kiewa Valley as it provides evidence that the graziers and cattle stations required to be self sufficient in all aspects of day to day maintenance and replenishment of worn materials requiring to be "manufactured " at the property and lack of replacements from commercially shelved products. This aspect of "survival" in the "bush" can be seen in the "huts" built on the Bogong High Plains to accommodate the seasonal grazing of cattle from the Kiewa Valley.This black melting pot is made of cast iron. The lid is missing. The top rim of the pot has three lips for poring accuracy. The formation of these lips are in a "triangle" formation. The top section of the body has a curve inwards reducing the pot diameter from 270mm at the base to 135mm.at the top. The handle is made from heavy gauge wire which is fastened to the body through two lugs (welded onto the top section of the pot) and fasten through a hole at the top of each lug. The handle has a "U" shape as it goes through the lug hole, ensuring no accidental fixture to any side thus allowing free swiveling from one side to the other . "BH" indented within a diamond shape. Opposite "No 3"camp fire cooking utensils, hot plate, cast iron cooking appliance, drovers kitchen

This hat is one worn by members of the Boy Scouts. Warrnambool today has two Boy Scout groups and Allansford has one. The Warrnambool Tooram group has halls at the corner of Banyan and Timor Streets and in Otway Road and the Warrnambool Norfolk group has its headquarters at the corner of Kepler Street and Raglan Parade. This hat is of interest as an example of the hat worn by scouts in Warrnambool in the 20th century. The same type of hat is still worn by Boy Scouts today. This is a khaki felt hat with a wide brim The crown is folded in 4 sections with four eyelets. There is a brown leather band around the crown and a silver-coloured buckle and two silver studs. The band is adjustable and a piece of string with a knot is used for adjusting the chin strap and for hanging the hat on a peg. The chin strap is made of plaited leather and the inside is slightly stained. The hat is slotted into a wooden frame made of varnished plyboard. The frame is U shaped with two straight sides. A smaller added section of plyboard has been placed on top of the frame and this has an opening at the top to allow the hat brim to slot into the frame. This frame appears to be home-made. scouting in warrnambool, history of warrnambool

The design of this pair (RN 758 & 759) is based on Thonet’s No. 18 chair, which was originally produced in 1876 by Thonet, and is still one of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. The label notes the design as “AUS MASSIV GEBOGENEM HOLZE vorm” which translates to “solid curved sandals shape”, a good description for the back of the chair. The chairs have marks, paper labels and symbols on them that show that the maker was Harnisch & Co., Neuschler (also called Banská Bystrica) Furniture Factory in Neuschol (Beszterczebanya), Hungary, privileged makers for the Imperial and Royal Austrian-Hungarian Empire 1867 – 1918. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 produced in the 1850’s, was his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. The No. 18 chair was produced in 1876, one of a group of chars with back inserts consisting of curves and loops of bentwood. These bentwood chairs are believed to be associated with the either the original Warrnambool Town Hall or the Toc H Group in Warrnambool. The Warrnambool Town Hall played a significant role in the both the local government and the social events of local and district areas. It was a place for Council meetings, community events and entertainment, theatrical and musical.Chair, bentwood, 'French Bistro Chair' with a floral pattern carved in seat. Backrest has inverted U shape inside that extends to the seat. Supports on either side of backrest's base join to back of seat. Legs have a wooded bracing ring. Marks are embossed into rim under seat. Paper label, cream with black print, on rim; Right side of label has the symbol of Heraldic Shield. Text on label. Made by NEUSOHLER FABRIK FUR MOBEL, AUS MASSIV GEBOGENEM HOLZE, vorm. HARNISCH & Co, NEUSOHL (BESZTERCaZEBANYA) UNGARN ' Hand written under seat "T H" in black paint, "T H " in white chalk.Marks; pressed into rim under seat is "3", and "Crown [over] (N)", Paper label, cream with black print, on rim; Left side has Mark “N inside circle under crown”. Right side has symbol of Heraldic Shield. Text on label “Trade – K.u.K.- Mark / NEUSOHLER FABRIK FUR MOBEL/ AUS MASSIV GEBOGENEM HOLZE, vorm. HARNISCH&Co / NEUSOHL (BESZTERCaZEBANYA) UNGARN ' Hand written under seat "T H" in black paint, "T H " in white chalk. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bentwood chair, café chair, restaurant chair, thonet design chair, neusohler fabrik fur nobel, k.u.k. approved manufacturer, hungry, harnisch & co, k.u.k., public hall chair, toc h

BHS CollectionCalf length, waisted purple dress of synthetic crepe fabric with elbow length sleeves. U shaped neckline at front. High rounded neckline at back with centre 8 cm opening fastened with two hooks and eyes. Decorative beading at centre of bodice. Flower and leaf patterns. Bodice has two small pleats at waistline on each side . Padded shoulders. Side opening at waist on LHS with 20 cm metal zipper. Same fabric belt with 4 cm fabric covered buckle of different purple colour. Front of skirt has eight gored panels from the waistline. Back of skirt has three panels. Dress unlined.costume, female, calf length purple dress

Photograph of U206 in Mount Alexander Road, with the NMETL brick powerhouse behind. The driver is hopping off the tram (to attend points) while the conductor is on the rear platform. Note the drop bars rather than folding gates as on other cars. The Cooling tower is not in the photo, indicating it has been demolished. The Power Station was demolished in 1925 (check). In the background is the St Georges Anglican church which was built during 1925. Sun angle - possibly winter.Yields information about Essendon depot and tram U 206, 1925.Black and White Copy Negative Photograph and print with details on the rear.In ink on the rear "MMTB U class 206 ex North Melbourne Electric Tramways (Essendon), outside depot in Mt Alexander Road, Ascot Vale, called Essendon, 1925. The brick building was pulled down a few years ago for a modern layout. See April Tram Tracks." Has both the Ken Magor stamp and Wal Jack stamp with "T70" written in.trams, tramways, u class, mount alexander road, essendon depot, nmetl, tram 206, mmtb

Wooden rectangular base painted black with two display pieces. One a black oval frame with a three dimensional bird scene with tree's and other foliage. The other a red piece of rectangular paper with gold Korean or Japanese writing surrounded by a gold bird and dragon design. The paper is held between two sheets of plastic which is held up by a small wooden mount that has a thermometer, reading in both Celsius and Fahrenheit. There is also a small label with "ASTRONOMY" written on it and with Korean or Japanese pictograms writing underneath. There is also two mystery screw bolts just above the label. small label with "ASTRONOMY" written on it and with Korean? writing underneathkorean, bird scene, thermometer, gift, seamen, sailors, seafarers, lacker, peacock

Story to be placed here - Available to publicMinature cast iron, Black Solid Wood Stove with miniature utensils. The stove is on legs with left hand extension for pots, right hand extension with holes, removeable hot plates [4 round 1 rectangle] tin chimney with folded join and seperate decorative cover with pot stands x2 , front door opens on hinges with internal gold pan with gold crescent logo. Frying pan, hot plate handle and "swan flat iron on stand. Solid fuel space with tin base. 2 screws and bolts used to assemble stove. 14 removeable parts.crescent, star, scrolls, wood, iron, tin, cast, stove, black, cast iron, star, solid, fuel, chimney, flat iron stand, flat, stand, hot plates, frying, pan, bolt, screws, legs, toy, miniature, crescent, made in taiwan, taiwan, wood box

Pumps were used to move water from one place to another. This one was connected by a belt to an engine that would drive it. Electricity is used to drive pumps nowadays.This pump was used in the original Kiewa Hydro Electric Scheme.Blue steel and brass water pump bolted onto a wooden base. The stand of the pump is rectangular at one end and round at the other. The rectangular end has a hollow brass cylinder extending up. Inside the brass cylinder is a steel piece with a wide brass cylinder attached at right angles at the top. This is attached at the top to a blue steel 'T' at which the other end has a blue (on the inside) wheel with four curved spokes. When the wheel is turned the steel piece inside the cylinder moves from side to side. On either side of the cylinder, at its base are outlets with screw on fittings. Embossed "Simplex" along the stem of the 'T' and "Model / D" on the opposite side.piston water pump; simplex

Six colour photographs at the City of Port Phillip mayoral election of Janet Bolitho on December 8 2005 at St Kilda Town Hall. .01 - PMHPS group (from left) Norah Howard, Jack Bolt, Pat Grainger, Janet Bolitho, Anne Callaghan, Graham Bride, Glen Stuart, Margaret Bride (also scanned) .02 - Janet Bolitho and David Spooks CEO, City of Port Phillip .03 - Janet Bolitho and Liana Thompson (also scanned) .04 Janet Bolitho and Graham Bride .05 - Glen Stuart and Janet Bolitho .06 - Pat grainger and Janet Bolitholocal government - city of port phillip, celebrations fetes and exhibitions, politics, janet bolitho, pat grainger, liana thompson, graham bride, margaret bride, glen stuart, jack bolt, norah howard, anne callaghan

Has a strong association with Dave Kellett, motorman and inspector in Ballarat; issued to crews in order collect fares, hold tickets and money.Leather bag with outside bag (for ticket wallet) with metal strips on openable section, fitted with push button catch, four coin compartment inside and adjustable shoulder strap. Has been fitted with a coin dispenser (screw and bolted in) for six different coins (50c, 20c, 10c, 5c, 2c, and 1c). Coin holder plastic - blue base, white top with red coin supports or bases and metal springs. Bag sewn with some rivets. On rear of bag, at top, stitching has been redone using copper wire.) Has an inscription inside. Not to be used in traffic.On inside of bag, opposite coin holder in blue biro "44 D.Kellett 7 Head St. Wendouree" On top of left hand side of coin holder, partly faded is "D.Kellett 7 Head St. Wendouree"trams, tramways, cash bag, tickets, fares, conductors bag

White paper catalogue with brown printing for a sale on account of Parks Victoria, on 27th February 1997 at San Remo. For sale were marine & general service equipment, boat, crane, forklift, metal shop and woodworking machinery, pnu. & power tools, outboard motor, winches, trailers, hardwood & railway line, office furniture & equipment, nuts & bolts and hydraulic underwater tools. Announcement printed in the front of catalogue mentions that J. H. Curnow & Son Pty. Ltd. Are combining their name with the Dyett family and trading as Curnow Dyett, Real Estate Agents, Auctioneers and Qualified Valuers.business, auctioneers, curnow dyett, ian dyett collection - auction catalogue - parks victoria, leigh hart, ian dyett, curnow dyett, j h curnow & son pty ltd

A Wright & Ditson 'WLS Blue Streak' tennis racquet. String whipping around shoulders and base of throat. Racquet model name 'BLUE STREAK', printed along throat on obverse and model name 'WLS' printed as lightning bolts across throat on reverse. Around the 'WLS' emblem there are three circular designs with 'SR/Co' (retailer name) contained within each. Manufacturer name and place of manufacture printed on right side of shaft. Octagonal fine-grooved handle, with leather end wrap. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Gut, Stringtennis

The banner and frame were carried by representatives of the 38th Battalion during parades..1) Rectangular red cloth banner with gold coloured fringing sewn to the bottom edge. Red cloth loops are sewn onto each side and the top to facilitate attachment to the metal frame - see .2). Printed on both sides in gold, black and white - '38 Battalion AIF'. The '38' is printed on a replica of the 38th Battalion colour patch. .2) Rectangular frame in khaki coloured tubular metal. Each corner is clamped and secured with bolts and wing nuts to allow for the frame to be dismantled. The top LH and RH corners are topped with a cast meat Rising Sun Badge over the letters AIF.Nilbanners - military, 38th battalion, metalwork, badges, passchendaele barracks trust

Series of 8 black and white photographs of the trackwork used at H crossings (where two tracks cross another two tracks at right angles.) .1 - H crossing being renewed. .2 - New H crossing laide out in a yard .3 - H crossing being completed at Queensway / Chapel and Dandenong Road, early 1968 with the All Saints church in the background. .4 - being renewed .5 - ditto .6 - ditto with a tram crossing. .7 - as for .4 .8 - showing extensive fish plating on a wooden longitudinal sleepers, plates bolted to the wood or timbers.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment, queensway, chapel st, dandenong road

Any faults in the final product can be repaired by mending. Prior to more advanced machinery, fabric was draped over a mending table and carefully inspected for faults. Quick eyes and nimble fingers were needed. Repairing faults was a highly skilled manual operation. Any knot or thickness had to be removed without affecting the quality of the fabric and mending had to be invisible. In the 1930s to make the day pass faster, popular records were played to the factory workers in the mending room. The top of the table is propped up to make it a well-lit surface over which bolts of fabric were unrolled to check for faults. Menders repaired them with invisible hand stitching. Each weaver stitched a coloured thread in the selvage to show the start of their shift, therefore if mistakes were found the company could easily find who was responsible. This table was used by Gail Morris in teh 1960s. Large wooden table with tilted top. mending table, wool processing, fabric, textile industry

Photograph was taken at the Mission to Seafarers Melbourne. It is historically significant as it marks a royal visit made by the Duke and Duchess of Gloucester during the Duke of Gloucester's term as 11th Governor General of Australia (1945 - 1947). Princess Alice, Duchess of Gloucester, GCB, CI, GCVO, GCStJ, GBE (born Lady Alice Christabel Montagu Douglas Scott; 25 December 1901 – 29 October 2004) was the wife of Prince Henry, Duke of Gloucester, the third son of King George V and Queen Mary. Frank Oliver was MTS chaplain during this period. The Gloucesters did not return to Australia on any official visit until 1965. (see ADB entry for Duke of Gloucester) According to the list of engagements from the Argus, on Saturday the Duke and Duchess left Governor House to visit the Central Institute at 11am where they were received by the Governor and Lady Dugan, the chaplain (Padre Oliver) and members of the committee. They left at 11.15am : the legend of the picture "AS THE DUCHESS LEFT THE MISSION TO SEAMEN Central Institute on Saturday morning, Padre Frank Oliver, chaplain, called for three cheers, which were given heartily."This photograph reveals the contemporaneous relationship between Australians and the British Royal family and connection through the International organisation that is the Mission to Seafarers. Current President is HRH the Princess Royal.Black and white photograph of Princess Alice the Duchess of Gloucester. The Duchess at middle left with Chaplain Frank Oliver at middle right. The Chaplain is waving and possibly leading a cheer. He is wearing a naval uniform. The Duchess is wearing a black hat and white short-sleeved dress holding a bunch of flowers. In the left of the photograph is a man holding his right arm up hiding his face from view. In the background there is a crowd of onlookers behind a railing.Front: "Duchess of Gloucester 1969" in blue pen in the bottom right corner. (see also notes re this date) There is also what appears to be a watermark on the middle left side. Back: "H.R.H. Duchess of Gloucester visiting Missions to Seamen, Melbourne." in the top left corner on an angle. "Copyright The Argus, Melbourne. Photograph Neg. No. U-646 Ref. No." in purple ink in the middle. The Neg. No. is in pencil.uniform, flowers, chaplain, princess alice, mission to seafarers, mission to seamen, duke of gloucester, duchess of gloucester, governor general, frank leslie oliver, padre oliver, royal visit, flinders street, melbourne

This field telephone was developed primary for military purposes (World War I) and other wars/military interventions there after. It was the first "mobile" telephone which had a prime objective of providing isolated or "hard" to connect with locations instant communication links. Like a lot of "new" technologies it evolved from a war environment. This handset was used to connect offices and workshops, which due to their functions could not be co-located with their prime office(external workshops).The evolution from the early 1900s to the mid 1980s when mobile communication technology progressed in leaps and bounds from hard wire telephone communication to mobile digital receivers. This handset was manufactured by a subcontracted Australian company under the Australian Post Office mandate.This handset is significant in that it was donated by the Mount Beauty Timber yards and formed an integrated part of its communication system with its out lying work yards and buildings, before the mobile handset evolution. This handset was located in an environment which required a rugged and reliable day to day communications linkage as a vital part of its logistical (business) survival. As progress demands it, the faster that customers are satisfied with the service they obtain from suppliers the longer those services will be asked for and the longer and more profitable the supplier will be. This edict is as true for rural companies as it is for small or large city businesses. The customer is "always" right.This sturdy field telephone has a shell housing made in black bakelite material with a "U" form housing the major components (wiring, magneto and batteries). The main housing has two metal bells, with a central ringer between both, on the top part (to notify incoming calls). In front of the main structure is a box with the telephone hand piece (ear and mouth receptacles) nestled on two cradles. An on/off switch is activated when handset is removed from its cradle. On the front of the control box is a winder handle(to ring off) and in a field situation to activate/deactivate the magneto. To the left of the winder but on the the main body are two wind up connection buttons for the connection of operational wires (power)On the main right hand front body and next to two chrome switches is a plate with "L (next to the top switch) and below this "L2" and underneath this are "or" "EARTH". There is a plate fastened to the front of the handset and behind the winder with "REPLACE HANDSET WHEN FINISHED" and below the winder 'SERIAL NUMBER 5116"field telephone, world war ii field telephone f mk i

Envelope with printed Ancient Order of Foresters' Friendly Society Registered Pursuant to Act of Parliament printed across the top. Mauve two penny stamp attached with a heavy postmarked 4 across it. Addressed to Mr. G. H. Smith Care of Mr. Thomas Davey, Albury, New South Wales. Unclaimed 33 written in red pencil on the front. Also stamped Advertised Unclaimed. Sandhurst MR 1? 77 Victoria and Albury AP21 1877 N.S.W. postmarks. Also Melbourne 6 X MR 14 7?, Albury MR1? 1877 N.S.W., part of a postmark and a green D ? B U OC 1 77 Victoria postmarks. Patterned impression on the flap.societies, aof, correspondence, ancient order of foresters no. 3770 collection - correspondence, ancient order of foresters' friendly society, g h smith, thomas davey

A test tube, also known as a culture tube or sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top, usually with a rounded U-shaped bottom. Test tubes are widely used by pharmacists to hold, mix, or heat small quantities of solid or liquid chemicals, especially for qualitative experiments and assays. Their round bottom and straight sides minimize mass loss when pouring, make them easier to clean, and allow convenient monitoring of the contents. The long, narrow neck slows down the spreading of vapours and gases to the environment. Test tubes are usually held in special-purpose racks, Test tubes for physics and chemistry are usually made of glass for better resistance to heat and corrosive chemicals and longer life. Tubes made from expansion-resistant glasses, such as borosilicate glass, can be placed directly over a Bunsen burner flame.8 clear glass test tubes of varied capacity with 3 glass mixers sitting in a wooden stand. A 1 metre length of clear plastic tubing is with this setglass manufacturers, test tubes, culture tubes, sample tubes, borosilicate glass, otto schlott, felton grimwade company, melbourne glass bottle works, laboratory glass, pharmacy, moorabbin, bentleigh, cheltenham, spotswood melbourne

This sniper shield may have been used by German troops during the First World War. There are few other examples of sniper shields of this shape or style, so it was possibly not a widely used design.Metal sniper shield constructed of a large flat front with curved edges, onto which a handle-like piece is soldered on one end and bolted on another. This handle has a pin which presumably adjusts the height/angle of the shield in relation to the ground. The third piece of the shield is a stand with a curved end, presumably rests on the ground, and on the other end a series of five holes which adjust the height/angle. The shield itself is roughly square in shape with a rectangular cut out off-centre at the top and a larger rectangular cut out at the base, which forms two pointed ends, possibly for securing into earth like a peg."G-01" is inscribed in ink, a registration number rather than historic inscription.germany, first world war, world war i, world war 1, the great war, sniper, firearm

This raker/jointer/guage set is a sharpening tool for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular saw sharpening method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys during this period and in the dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back" This raker/jointer saw sharpener was made in the USA (DISSTON) from cast and flat iron. The main body has been painted in orange. It has three adjustment screws on the top horizontal bar and one bolt on(adjusting) leveling platform on the bottom. The small size and weight of this saw sharpener was ideal for the travelling/mobile logger or surveyor(as in this case). The main frame resembles two towers connected by two horizontal bars and the top of the towers has a horizontal bar with adjustment screws. See KVHS 0090 (B) for setting stake wedge adjusting the rake and cutting angle and KVHS 0090 (C) for a small spanner (for adjustments).On one inner supports is stamped "DISSTON" and on the other "U.S.A."hand tool, saw, sharpening method, tree felling.

The table was used to separate gold from crushed quartz through vibration movement The Phoenix Foundry, part of James Martin and Company, was established by James Martin, MLC, often referred to as the “Father of Gawler”. The Phoenix Foundry was significant, historically, because it formed part of the leading engineering works in the state in the late nineteenth century when Gawler was one of Australia's most important industrial centres. The company was established in 1848 and ceased operation: in1907 Large Phoenix-Weir concentrating table. Rectangular green and pink painted table, inscription on one side with decorative motives, comprises of slatted table top which creates ridges, wooden channel which is bolted on table top, box with holes in base sitting loosely next to channel, table is joined to gear/s which in turn runs belt wheel, gear/s sits on unpainted concrete block, whole table sits on 2 concrete pillars which are raised, table top is tilted on an angle, wooden trough is on lower side of table and sits underneath which is sitting on rusty tins."the phoenix-weir jas martin & co/concentrating table sole makers/gawler. S.A"

Set of two Black and white negatives of track construction in La Trobe St during 1950. .1 - Looking east from Queen St. Has the Argus building in the view. Both tracks have been constructed and the concrete foundation poured pending the top asphalt layer, a building selling Skoda cars, .2 - Looking west from Queen St with a tram crossing in the background in William St. Photo shoes the method of track construction - timber sleepers with the rail bolted to the sleeper. Pending concerting. In the background is The Mint and terrace houses on the left. There is a billboard for 1949 movie, "The Bribe". Photo not in Wal Jack Melbourne album.trams, tramways, la trobe st, track construction, trackwork, queen st

The Stanley Works was founded by Frederick Trent Stanley in 1843, originally a bolt and door hardware manufacturing company located in New Britain, Connecticut, USA. The Stanley Rule and Level Company was founded in 1857 by Henry Stanley in New Britain, Connecticut. In 1920, this company was independent from Trent Stanley's works but they merged with the separate but related Stanley Works, that was founded by Henry Stanley's cousin Frederick Trent Stanley, and continued operating as its hand tools division. At this time after the merger the “Sweetheart” Trademark was adopted for tools made between 1922 to 1935 with augers manufactured during this time having the “AA” trademark and this is when the Stanley company we know today came into being. Around 1937, Stanley acquired the British J. A. Chapman company, a British manufacturer of carpentry tools and other items (including bayonets during World War I) formerly located in Sheffield, from Norman Neill. This helped Stanley to enter the British market.A early tool manufactured by an emerging company that today produces tools for sale in just about every country in the world. The subject items trademark shows the item was produced between 1922-1935 at a time when the company had just merged and was transitioning into Stanley Tools Ltd.Nose bit auger. Similar to shell bit except the nose turned inwards to form a cutting lip. Stamped on shank "AA" trade mark (Stanley Tools)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Picture in photograph album donated by Mrs Faull. The plane landed at Linton Park as part of an advertising campaign by Astor Radios in 1928. Information provided by Ron Preston of Linton: "The day the plane landed in Linton Park / late 20s. Fairbanks and Harrison operated a garage in Sussex St opposite Bryant's shop. Fairbanks was married to Carrie Murrell's sister Dorrie and William (Bill) Harrison was married to Dulcie Nicol. Among other things that the garage sold were ASTOR RADIOS. To promote ASTOR RADIO a Gypsy Moth double seater aircraft flew low over towns to advertise. ASTOR RADIO was written under both wings. by Boltes) staying overnight. Both Harrison & Fairbanks were taken up for a ride. The pilot "dive-bombed" the local children, many of them seeking shelter under the bridge, as they were frightened, not having seen a plane up close before." Sepia photograph of a biplane surrounded by a crowd of people. One of three photographs of this occasion, the others are Registration nos. 627.1 & 627.2"1st aeroplane to land in Linton 1928". events, faull collection, aeroplanes, linton park