Charles Wheeler biography link http://www.portrait.gov.au/people/charles-wheeler-1881 Painted by a prominent artist. Refer to Sir Ronald East's history of the Greenwood family pp. 336-371, noteably page 343 that mentions about Henrietta Carr, only daughter on George F. Carr, who married AV Greenwood in 1896. Also reference to The Wattle Club pp. 356-7. Thus giving the connection of the Greenwood and Carr families, the subjects of Charles Wheeler's painting.Painting in glass-fronted frame.Typewritten notation behind the frame - "Greenwood oral family history says that this unsigned painting was done by Charles Wheeler as a demonstration for Rose Greenwood, (A.V. Greenwood's sister). They shared a studio at the Wattle Club Hall at Box Hill circa 1890s. The subject matter was said to be Grandfather Carr's orchard in Wantirna Road (Ringwood - Still standing in 2003). Source: Mary Greenwood, youngest Granddaughter of A.V. Greenwood."

An article from the Camberwell Free Press in 1987 of an interview with Legatee Dick Wheeler. He tells of the sense of wartime mateship that led him to join Legacy. He was one of 30 Legatees that worked with widows and children in Hawthorn/Camberwell area providing advice and financial and practical assistance with welfare, housing, education and personal development matters. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of a newspaper article about Legacy and Dick Wheeler, a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Photocopy of an article from the Camberwell Free Press Tuesday 25 August 1987 of an interview with Dick Wheeler.past presidents, dick wheeler

This postcard depicts the set-up of an abandoned gold mine. This includes a water wheel and other mining implements next to a creek. The postcard inscription indicates that this image is of the remains of the Wallaby Reef battery and water wheel. Wallaby Reef was discovered in 1864, and a prospecting claim established a four head battery and water wheel. Quartz was mined there, with gold also discovered at this location at a later date. By 1878 the mine was no longer resulting in rich deposits, this resulted in the miners moving their search for gold closer to the river where they were able to access more gold. This was in approximately 1879. In 1882 a rich deposit was found. In 1908 the battery was closed, and the mine finished. This photo was taken in 1920 and shows the deterioration of the site since its closure. Gold mining was crucial to the development of the Beechworth area. It has strong research and historical value because the clarity of the photo shows all the minute details of the mining equipment. The text on the back also indicates the mine is the Wallaby Mine, which was used for 45 years to find gold and quartz. Therefore, due to the location being quickly abandoned, this site is a rich location for historical study on gold mining during the 1900s. It can provide important information on the types of tools utilised and the impact of the mining on the environment.Black and white postcard photograph on card.8169 Be / Also near Wallaby Reef Workings / Relics of Rechabite Reef (locality) workings. / Shaft in bed of creek. Wheel used to drive sheadd (?) / stamp battery too I believe near B'worth 1920?beechworth, mining, gold mining, quartz mining, wallaby reef mine, mine battery head

Recreation Centre during State Womens Basketball Conference game between Lakes Breakers and Heyfield Loggers Sue Wheeler and Freya Bott of Lakes in photo Lakes Entrance VictoriaBlack and white photograph taken at Recreation Centre during State Womens Basketball Conference game between Lakes Breakers and Heyfield Loggers Sue Wheeler and Freya Bott of Lakes in photo Lakes Entrance Victoriasports, basketball, recreation

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Small Wheel Lorry replicates the vehicle that enjoyed respect from the public during the 1880's and early 1900's. A model of a Small Wheel Lorry with a brown short two spoked wheeled wooden tray with low sides drawn by a cream coloured horse. The horse has reins and a simple noseband.There is a single seat and footrest at the front for the driver. The wooden shafts are to control the horse whilst working and they have a silver chain attached on each side. It has four replica brown wooden wine barrels with silver rims in the cart.replicas, models, scale models, vehicles, horse drawn vehicles, toy horses, drays, carts, lorries

A colour slide a junior legatee at the steering wheel of a ship during Operation Float. It is believed to be in 1959 as other slides that year were in the same brand of slide mount. Operation Float was an event run by Melbourne Legacy to take Junior legatees on an outing. It could have been to naval boats such as HMAS Cerberus or to a Yacht club. It gave the junior legatees the opportunity to see a naval boat in action, spend time on the water or try sailing. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of outings being organised for children.Colour slide of junior legatee at a ship's steering wheel with a legatee in brown Anscochrome cardboard mount.Printed on front in red ink 'Anscochrome / View from this side / Made in Australia'. operation float, junior legatee outings

Marion POPPLEWELL (1912-1998) Born Yorkshire Marion Popplewell visited relatives in Ballarat in the early 1940s. She loved Ballarat so much she decided to stay. She worked at a bank in Lydiard Street, opposite the Art Gallery of Ballarat, and lived in rooms above the Lydiard Street Shops. Marion enrolled in some evening classes at the Ballarat Technical Art School (a predecessor institution of Federation University Australia) conducted by Neville Bunning. He was nor overly happy with her small colourful jugs and vases, wanting her to handbuild pots, rather than wheel throw them. Marion Popplewell continued making her small wheel thrown pots with fine handles, and made glazes herself from materials imported from England. Attending classes in Ceramics up until the mid 1970s, she also took some classes in Woodwork and Needlework. Her 'Pink Glazed Jug' 1945 won a prize at the Royal Melbourne Show in the late 1940s. She died in Melbourne on 26 September 1998. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Wheel thrown vessel with 2 handles and turned foot. Bronze like glaze with some feint pearlescence and slight crazing. Inscription on base reads "MP 74," sticker reads "2"art, artwork, marion popplewell, popplewell, ceramics, ballarat technical art school

Two colour slides of a steering wheel, dashboard and speedometer. One shows 65 miles per hour and the second 70 miles per hour. It was during Operation Firewood. Legatees would organise collection of wood from the country and distribute it to widows in metropolitan Melbourne. Other slides show the cutting and loading of wood and delivery to widows in metropolitan Melbourne. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of Legacy helping widows by sourcing, supplying and delivering firewood. When open fires were the main source of heating, a load of firewood and help moving it, would have been very important to the widows.Colour slide x 2 of the steering wheel and speedometer during Operation Firewood in brown Anscochrome cardboard mount.Printed on front in red ink 'Anscochrome / View from this side / Made in Australia'. Hand written on front of one '65MPH Warming up' and on the other '70MPH just cruising' in blue pen. Printed on reverse in red ink 'Processed by Verycolor photo labs. Melbourne, Victoria'.operation firewood, cars

Black & white photograph of 2 men, 1 girl and 1 boy on upper deck of P. S. Kelvin. In the background is a 3rd man, Hugh Price, at the wheel. Documented as being on mail run and at the Murray BridgeDemonstrates passenger transport and travel along the river as well as the delivery of mail services between rural communities.Black & white photograph of 2 men, 1 girl and 1 boy on upper deck of P. S. Kelvin. In background is a 3rd man, (Hugh Price) at wheel. Documented as being on mail run and at the Murray Bridge Echuca.In pencil on back : Kelvinp.s. kelvin, murray bridge, mail run, paddlesteamers, murray river, hugh price

The Bendigo School of Mines was opened in 1873 following the first report of the Technological Commission in 1869 which recommended the establishment of schools of design and science to meet the scientific and technical needs of the mining industry on the local gold fields. Initially mining, chemistry, geology, metallurgy and art were taught while a separate school of design was established in c. 1870 but incorporated into the School of Mines around 1883 when it was renamed as the School of Mines and Industry. In 1904 The Mechanics Institute was liquidated and its assets and buildings acquired by the School of Mines. Around 1907 a Junior Technical School commenced to operate at the School of Mines and Industry but ceased operating in 1961 with that function being transferred to the White Hills and Kangaroo Flat Technical Schools.Obverse; Ornate relief design made up of a coat of arms with mining icons in each quarter flanked by flags on either side. Per varios usus artem experientia fecit written in scroll underneath. Translation: Practice has brought skill through different exercises. (Manilius) Reverse; Outer wheel Bendigo School of Mines and Industries. Inner; 1873 /Jubilee /1923Obverse; Per varios usus artem experientia fecit Reverse; Outer wheel Bendigo School of Mines and Industries. Inner; 1873 /Jubilee /1923city of greater bendigo education, bendigo school of mines

This carpenter's clamp would have been used in confined spaces where a full turn of the brace cannot be achieved. It is fitted with a pawl mechanism - a hinged or pivoted device adapted to fit into a notch of a ratchet wheel to impart forward motion or prevent backward motion. This item would have been used on a rural property in constructing or maintaining infrastructure.This item is an example of a woodworking tool used in the first half of the 20th century prior to the widespread use of power tools.A metal ratchet brace with a wooden handle grip. It has a hinged mechanism device which fits into the notches of the ratchet wheel - a pawl. The drill bit is jammed and the chuck is rusted.woodworking tool brace-and-bit carpentry

De Soza park was developed as a public amenity from the early 1980s. The poppet head and Chilean wheel sculpture are representative of the gold mining origins of the town.The park, located centrally in Buninyong is of social and historic significance.Original B/W photograph of streetscape of De Soza park frontage to Warrenheip St., Buninyong, with poppet head, rotunda and Chilean Wheel sculpture, former post office in background. Large eucalypt tree present behind rotunda, large cypress tree to north of park.buninyong, de soza, park, rotunda, poppet head, sculpture, chilean wheel, post office, warrenheip st, streetscape

Slide. Bendigo Show. The Big Wheel Ferris Wheel.slide, bendigo, bendigo show., bendigo show.

A cutting from from a Melbourne Legacy President's report showing a photo of Legatee Richard Norman Wheeler (President of Melbourne Legacy in 1986). It was collected to be a record of a photo of past presidents. During World War 2 Dick served as a pilot with the RAAF and the RAF in North Africa, Italy and Yugoslavia. He joined Melbourne Legacy in 1976. The newspaper cuttings of his death notice from September 1989. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee Dick Wheeler a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.An article with a black and white photo of Legatee Richard Wheeler - President 1986 and two newspaper cuttings of his death notice.past presidents, dick wheeler

This is the whip's wheel that was on display for 40 years on the vessel SS Rowitta, installed on the lake at the Flagstaff Hill Maritime Museum and Village as an educational display and attraction. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. The ship's wheel is an example of the equipment used on a steam ship for navigation. This wheel is connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Ship's wheel, light coloured wood, eight turned spokes, brass hub in centre with square hold. The wheel was part of the display of the vessel Rowitta at Flagstaff Hill.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, flagstaff hill, maritime village, maritime museum, ss rowitta, navigation, marine technology, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century vessel, passenger vessel, tamar trading company, tamar river, launceston, george town, sorrento, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance, ship's wheel, ship's steering wheel, ship's steering, direction

Provides information on how a tramcar body was fitted with a wheelset or truck (Brill Radiax EB1 type). Lifted on the jacks after delivery by a horse drawn jinker from the Railway Station (See Reg Item 8321) The wheel set is being pushed under the tramcar by another tramcar. Once fitted the tramcar would have been towed back into the depot and the motors etc connected. Has the Blakiston & Co. building in the background. Yields information about how tramcar bodies were lifted outside the Geelong tram depot in Brougham St in order to be made operational. Copy photograph on black plastic type backing with black edges of a Pengelley Adelaide built tramcar body on jacks being fitted with a truck or wheel set.geelong, tramways, pengelley, tram bodies, brill radiax truck, brougham st, trams

Newspaper clipping from "Bachchus Marsh Telegraph", 9/1995? about the relocation of ex MMTB W2 340 from the Hungry Jacks Restaurant Melton to Greendale and Mr. Robert Lilburn who attended the loading of the tram. Has a photo of Bob, holding a trolley wheel ex Geelong as well and some details of Bob as a tram enthusiast. Date: - Assumed to be 25/9 by notation on cutting and that the tram arrived in Melton in 1989 and was being moved six years later. No date on the cutting and on the rear page is an advertisement from KFC Bacchus Marsh opening in November 1995 and seeking staff.On cutting "Trolley Wheel Geelong 19", "Tram 340 25/9 Mon 9am) and "Bacchus Marsh Telegraph".geelong, tramcars, melton

Large caste iron wheel on which two knife cutters are fitted - hand rotated - material to be cut is fed through a canter-levered wooden box - reduction gears are used to ease the effort for the person operating it. All of this is mounted on a caste iron frame. Capable of cutting 'I/2 . 1/2 Chaff'|Similar one sold by Welch, Perrin & Co P/L in 1929 for 8 pound .The 'Bentall' Chaff Cutter moulded on the reduction gear cover. 'Bentall Improved (or Patented?) Chaff Cutter 913 Heybridge, Maldon, England' - on the body and wheel.rural industry, livestock

A prayer wheel is used in Tibetan Buddhism for personal worship. Tibetans believe that spinning the prayer wheel which as thousands or millions of mantras inside is equal to saying that many mantras, while being done in a fraction of the time. This helps accumulate merits, purify negative karma and obstacles on the path to enlightenment. This wheel has a hollow metal cylinder attached to a rod handle, made of ivory (with carved elephants), inlaid with coral and turquoise. Inside the cylinder is a tightly wound scroll printed with numerous mantras and wrapped around a spindle. The cylinder is embossed and decorated with inlaid coral and turquoise. A chain with a small weight at the end (made out of copper alloy) is affixed to the cylinder, allowing it to be spun by a slight rotation of the wrist. tibetan buddhism, holy objects, worship devices

This ship's wheel was hand made from wood and metal using a recycled cart wheel. It originally belonged to the "Reginald M", a 2 masted, flat bottomed, coastal trading ketch with single chine. The REGINALD M The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months and it was launched at Largs Bay in 1922. The Reginald M’s purpose was to serve the coastal trade of South Australia, to carry cargo cheaply and efficiently. It is believed that the keel was in fact hewn from two telegraph poles! Its builder frequented all the salvage yards for materials and fittings. Reginald M had a very shallow draft and a flat bottom that enabled it to come close to shore and to sit high and dry at low tide or to be beached on sand. The flat bottom was also to make the ship able to skim over reefs. Wagons could load and unload direct from her side. Her cargo included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Grit and Gypsum. On April 9th 1931Reginald M weathered a large storm in St Vincent Gulf, SA. The vessel suffered much damage; mast snapped and the crew laboured for four hours to free her by chopping off the past and rigging. The crew patched her up and slowly returned to Port Adelaide with only a portion of the insured cargo being damaged. Her crew members at the time were owner Mr John H Murch of Wells Street Largs Bay, Skipper Mr R Murch – John’s brother, Murray – son of Captain Murch and Seaman John Smith. Reg Webb purchased Carribie Station, at Marion in the Warooka District, south of Adelaide, in 1921. He cleared the land and farmed sheep and grain. In 1923 he shipped his own wool and grain from Marion Bay, having first carted 300 bags of the barley grain, 12 bags at a time, along the unmade track to the jetty. A photograph donated to Flagstaff Hill, dating about 1929 - 1942, shows two men on the Reginald M, holding between them their fishing catch of a large hammer shark. The photograph is stamped “GRENFELL STUDIO PORT LINCOLN PRINT” and titled “hammer shark caught on Reginald Emm”. The donor’s family lived on the Your Peninsular and despatched their grain from a chute at Gleeson’s Landing to the awaiting transport vessel. Reg knew the Murch Brothers from Port Adelaide. The brothers had been using their ketch REGINALD M to ship Guano from the Islands, led by Captain Richard Murch. Reg approached them in 1934 about shipping grain from Marion Bay. The brothers visited the bay and thought it was an ideal place. They showed Reg where to stack his grain and they measured up the cliffs. When Reg was ready, they brought down and installed a ninety foot wooden chute. The bags of grain were then individually sent down the chute, landing in a waiting small boat then rowed to REGINALD M, 14 bags at a time. After 10 hours REGINALD M would be fully loaded with 1300 bags of grain and shipped to waiting ports. At one time a wild storm destroyed the chute but it was rebuilt and strengthened. REGINALD M was involved in shipping the grain from there until 1938. In 1940 Able Seaman Allan H Lucas served on Reginald M between September and December, being engaged and discharged from Port of Adelaide. His Certificate of Discharge was signed by ship’s Master W S Murch. It seems that at some stage Reginald M was used as a Customs vessel, as one photograph in Flagstaff Hill’s collection shows “H.M.C. No. 3, Pt Adelaide” on the bow. In 1969 the last freight left Marion Bay on the ketch REGINALD M carrying grain, wool and explosives. In late 1970 she was sold to the Mt. Lyell Mining and Railway Company and was used by them as a barge to carry explosives. In 1972 the Navy League of Strahan, Tasmania, purchased her for use by the Strahan Sea Cadet Unit to use at Macquarie Harbour and renamed her T.S. Macquarie. However this plan for use of Reginald M did not come to pass. In 1974 Mr. Andrew Rennie, of East Brighton, Melbourne, bought her for a similar purpose. , paying $5,000 and donating a ‘Cadet of the Year” trophy to the Sea Cadets. He sailed her from Strahan to Melbourne, planning to use her for pleasure sailing. Also in 1975 Reginald M was sold to Melbourne Ferry Company at auction. Later in 1975 the Reginald M was bought by Flagstaff Maritime Museum for $20,000 . She has been restored and is now one of the exhibits in the Village lagoon or lake. It was restored in 2006 using funds from a $4,000 government grant. This ship's wheel is significant because of its association with the REGINALD M. REGNIALD M was a coastal trading ketch from South Australia built in 1922. It is one of very few sailing coastal trading vessels still extant, and its flat bottom, single chine shape illustrates a very simple but robust method of construction, compared to other round bilged examples of trading vessels. She is now listed on the Australian Register of Historic Vessels (ARHV Number: HV000562.)Ship’s wheel, also called a Helm, eight spoke design. Centre of wheel is handmade of wood and has iron rings around each side. The spokes are fitted into this wooden hub. The outer wheel has an iron ring on one side and sections of a wooden ring on the other. There are both original and modern bolt and screw fastenings. The wheel has remnants of black paint. This ship’s wheel was originally fitted to the ketch REGINALD M and removed during its restoration. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's wheel, hand made ship's wheel, coastal trader, reginald m, ketch, john murch, ch murch, reg webb, carribie station, mt lyell copper company, queenstown navy league, andrew rennie, melbourne ferry company, r.f. dale

significant as a work of art by local Pyrenees artist, locally significant to the Central Highlands Region of Victoria as a representation of local landscape and/or culture view of building on street watercolour on paper signed: V Wheeler 87 (lower left) verso: Artist V Wheeler MECHANICS INSTITUTE BEAUFORT 1987

tall glass bottle18 What looked to be a wagon wheel

Used by the internees at camp 3Dressmakers tracing wheel. Black wooden handle metal shaft and wheel.dressmakers tracing wheel

John O'LOUGHLIN Born Snowtown, South Australia In 1980 John O'Loughlin's life changed when he started wheel throwing ceramic vessels. During this time he discarded the superfluous and unnecessary clutter collected on the journey of life, yet retaining the essence of what mattered to him. John O’Loughlin's later artworks, such as 'Reliquary No. 20' engages with the way in which organised religion, specifically the Catholic Church, deals with the translation of the spiritual into the material. Informed by his extensive travels and studies, O’Loughlin’s ceramics reference the reliquaries and church artefacts that connect the life of this world with that of faith in another world. Completing undergeduate and post graduate works at Federation University John O'Loughlin's honours thesis was entitled "Ways and Means of Meaning, The Use of Symbol and Surface as Expressive Media in Ceramic Sculpture". The University provided a serious ceramic studio equipped with all the research tools for advanced ceramic exploration. Access to raw materials and a variety of kilns combined with excellent lecturers, mentors and technicians inspired, motivated and challenged him to push his accumulating knowledge to higher levels. O'Loughlin's working method in the studio is one of quiet, determined interaction with clay, idea and content. Experimentation with a variety of temperatures, firing methods and atmospheric conditions has produced a broad tonal and textural palette. He has worked with various clay bodies overlaid with coloured oxides, slips and engobes as the foundation for many of his works. O'Loughlin ufilised raised surfaces from old cemetery tombstones using the impressed forms and textures in his constructions. This research led him to the use of dry engobes to create a sense of antiquity, with crusty and distressed surfaces that resemble objects neglected in the oceans. These objects seem covered with the accretions and accumulations of history when re-discovered and brought to the surface as miraculous objects of mystery and magic. (https://www.thefreelibrary.com/John+O%27Loughlin%3A+a+man+re-invented.-a0216897107, accessed 12 September 2020) This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Four wheel thrown goblets, two with decorative stems. art, artwork, john o'loughlin, ceramics, goblets

Found in a box possibly used in battery operation.Two metal wheel shapes joined together by a short shaft. The larger metal wheel has cogs and spokes, the smaller wheel appears to be solid.