The leather headstall is connected to the metal bit are used in conjunction with a set of leather reins to guide and steer a horse or other similar animal. Made in Melbourne in 1900.The horse bridle and headstall were used in Warrnambool in the early 20th century. Bridle bit and headstall; horizontal metal oval shaped bit with a narrow rod each end that finishes in a narrow loop. Adjustable leather straps with holes are threaded through the narrow metal loops.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, horse husbandry, horse equipment, horse riding, 1900, melbourne, headstall, bridle, horse headgear, riding gear, horsemanship, equestrian equipment, headgear

This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only nine in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. A reasonably well-preserved ship’s deadeye with rust-stained wire loop-rope still attached. It retains portions of its original hemp cord and hessian wrapping. The flat sides of this thick wooden disc have three holes drilled through in a triangular configuration. The artefact is from the shipwreck of the LOCH ARD (1878). The survival of the loop-rope (wire cable) indicates it was an Upper Deadeye, connected to the shrouds (mast rigging).flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, deadeye, rigging

DCPU (Disruptive Pattern Camouflage Uniform) Work dress jacket - Colours light to dark green through to light to dark brown. Gore-Tex fabric for wet weather. Hood with peak and elastic drawstring with plastic lock clip. Plastic/metal two ended zipper and metal press studs - front fastening. Two front pockets with loop and hook (Velcro) fasteners. Two interior nylon mesh pocket with zipper. Sleeves at wrist - loop and hook adjustable strap. White colour polyester fabric manufacturers label on front zipper. Manufacturers information on label - black ink print. Label 1 "GSSM/www.gssm.com.au/MAR 2008/O/N 248007/ N/S/N 8415 - 66 - 145- 7093/ SIZE:L/ CHEST: 100-110CM /NAME/SERVICE" "CARE INSTRUCTIONS/ MACHINE WASHABLE: 40c/ DO NOT BLEACH/ DO NOT SPIN DRY/ DO NOT WRING/HAND TO DRY/ LIGHT/ COOL IRON/ FABRIC CONTENT/ FACE/LINER: 100% POLYESTER/ LAMINATE: PTFE" Label 2. "BATCH NO./5301011". uniform, army, work dress, dpcu

Lanyards were generally used on ceremonial occasions. Item part of collection of Craig Triffett as part of Cat. No. 5997.5White cotton material lanyard with small loop at one end and larger loop at the other end, knotted onto rope.lanyard, uniform

1. Blue drill cotton polyester skirt. It has belt loops at the waist. It has a side zip held shut with one button -colour deep blue. 2. & 3. Blue cotton/polyester skirts. They have belt loops with an installed belt. The belt has a silver chromed buckle. It has a side zip held shut with one black plastic button. It has a sewn in lining/petticoat. It has two pleats either side of the zip.3. Written on label, “W.326143. B. Williams”raaf cadet uniform, skirts, female uniform

Material labels that were sewn on as shoulder patches to signify nationality of Service people. Belonged to Peter Stoklahsa who enlisted 1966. Refer Cat no. 7674P for details.Material labels with; 1. & 2. Khaki green labels with Australia embroidered on top. Material is in a loop. Australia colour is dark blue. 3. Light blue label loop as above. Name also in dark blue."Australia" embroidered into one side.raaf, uniform

Part of the Kevin John Herdman No.397661 Collection. See Catalogue No. 5942P for details of his service record.Pair of khaki coloured shoulder boards, each with a Queen's Crown and RACT badge. The crown represents the rank of Major. On the back of each board are loops for fitting to an epaulette.Stamped on a loop on each board: 'SMALL 14 - 151/2'.uniform, shoulder board, major, kevin john herdman, royal australian corps of transport

Part of the Kevin John Herdman No.397661 Collection. See Catalogue No. 5942P for details of his service record.Pair khaki coloured shoulder boards without rank insignia or corps badge. Pim holes where insignia and badge were originally attached. on the back of each board are loops for fitting to an epaulette.Stamped on a loop on back of each: 'SMALL 14 - 151/2'.uniform, shoulder boards, kevin john herdman

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.Four jungle green coloured shoulder boards. each has an RACT corps badge. .1) to .3) have a Queen's Crown signifying the rank of Major. .4)'s crown is missing. Each board has two loops on the back for attaching to an epaulette. .1) to .4) Stamped on one rear loop: “SMALL 14 - 15 1/2”uniform, shoulder boards, major, royal australian corps of transport, kevin john herdman

Part of the Kevin John HERDMAN, No. 397661 Collection. See catalogue No. 5942P for details of his service record. "D" handle used to close a kit bag. The eyelets on the bag are threaded along the straight part. It can then be locked using a padlock through the small loop on the end of the curved sections.Lockable metal D-ring handle for kit bag. Curved section and straight part are hinged. Loop on the end of the curved section fits through a slot in the straight part.d handle, kevin john herdman

Black coloured lanyard for Army Engineers. Items in the collection re Tom Glazebrook, refer Cat No 4330.2 for his service details.1. Black Army Lanyard. One end has a small loop of approx 6 cm diameter. The other end is larger, approx 26 cm diameter. Each loop has a knot where it joins the main cord. 2. As above but in bad condition. Interior material has become exposed.uniform, accessories, engineers

Refers to the service of "WO2 Tommy PATTISON". Refer Cat No 5342.4.1. These trousers are of Aust Cam colour. It has a pocket on each leg. The pocket is held shut with 2 buttons. It has a handkerchief pocket on each hip. It has adjustable tabs for waist size. It has belt loops of similar material. It has double thickness on the knee area. At the ankle end of legs is a hem with an elastic draw cord. The fly is held shut with five buttons. 2. These trousers are of Aust Cam colour. It has a pocket on each leg. The pocket is held shut with 2 buttons. It has a handkerchief pocket on each hip. It has adjustable tabs for waist size. It has belt loops of similar material. It has double thickness on the knee area. At the ankle end of legs is a hem with an elastic draw cord. The fly is held shut with five buttons. To adjust the waist size a small webbing belt and steel buckle have been employed. uniforms, aust army, wo2 tommy pattison.

Part of the Cooper Collection.Collection of three large and two small metal army buttons. Each features an embossed crest. manufacturers details stamped on the back of each. one button has a metal loop on back. Other have two holes.On large button with loop: 'THE QUEEN'S OWN CAMERON HIGHLANDERS'.cooper collection, buttons, british army, uniform

Item in the collection re “MAJ. JOHN BALSILLIE MBE” Refer to Cat No 118.5 for his service details, RSL and Council history.Brown leather Sam Browne Belt fitted with double clawed brass buckle. A brass stud and leather loop secured the free end of the belt tongue. The shoulder strap, 32 mm wide, is connected by a similar loop and brass stud arrangement. A pair of "D" shaped rings are mounted at the bottom of the belt (for the sword). The belt also has a flat brass hook mounted against the belt, between the “D” rings. The belt is double layered on the back and left side section.Stamped inside the shoulder strap are the letters "HQEC"uniform, ceremonial, maj john balsillie

A courting chain was carved by a man and given to the girl he was courting. This was a common European practice in the past, with Welsh courting chains surviving from the 17th century, though the practice may have gone back even further than that. The chain indicated that man was a capable artisan and was occupying his hands in a healthy way, particularly when the lady was present. The many types of loops and chains carved all had symbolic meanings. The cage with the wooden balls inside was said to indicate the desire of the man for children and the number he would like. The symbolism of the arm and hand with the two digits touching is not known. This courting chain has no known local provenance but it is an interesting object as an example of the customs of the past. It will be useful for displays. This is a wooden carved courting chain. One end is in the shape of an arm and hand with the thumb and first finger touching at the tips. Then there are three chains linked to the arm with a peg inserted into another loop at the end. Next, joined to this, is another loop attached to a wooden cage which has two wooden balls inside. The chain is finished with a carved turret structure at the end. courting chains, history of warrnambool

This dress was worn by Margaret Vyner on her wedding day to Ian Mc Kendrick. Margaret's mother's name was Rita. Margaret was living with her family at Tawonga, Ian was living at Mt Beauty.The couple were locals of the Kiewa Valley. Ian worked at the Mt Beauty Post Office and Margaret at the Tawonga & District Hospital. Their 3 children grew up in Mt Beauty.Ivory / off white satin wedding dress with a train at the back. Puffed with stiffening & padded long sleeves which come to a point at the wrist where fastened with a press stud. Ruched cross over bodice with a V neckline with a semi circular skirt. Plain back to the waist and a half self belt fastened at the back by 3 covered buttons and 3 loops. Left side as a plaquet fastened by 2 hooks and eyes. Semi circular skirt which has, at the rear, a 100 cm train with a finger loop.wedding dress; margaret vyner (mckendrick); tawonga; ladies' clothing

This medical instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme. Used for sucking fluids during an operation. The sterilised pack is an old way of sterilising instruments.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.In sterilised bag. 3 metal instruments. 1. long and curved with holes at one end and hollow at the other. Near the hollow end the instrument breaks into 3 and rejoins further along. 2. An elongated "S" like metal instrument with an elongated hollow at one end and hollow at the other end where there is a small loop 3. A straight instrument except for close to one end where there is a hollow. At the other end it is hollow with a small loop near the end.medical instrument. hospital instrument. doctor. nurse. mt beauty. tawonga. yanckeur. operation. sterilise pack

Seal skin straps and webbing were introduced into the Victorian Alps by European skiers. Enthusiasts travelled to enjoy the snow and to explore the Victorian Alps including the Bogong High Plains. This equipment enabled them to travel over snow without slipping when going up hills. They took the skins off when they wanted to slide down hills. In later years, waxes were used for cross country skiing and then 'fish tail' markings on the back of skis to enable skiers to travel distances up and down mountains. Later developments also included motor transport (replacing horses to get to the snow line) and roads to take skiers to the ski fields and mechanised tows to take skiers up mountains so they could ski down (downhill skiing). Skate skiing has also developed as another form of skiing.Skiers visited the Bogong High Plains during summer and winter to explore and enjoy the High Plains. The equipment used was a forerunner to the variety used today and the different types of skiing done today. Falls Creek was developed during the construction of the Kiewa Electric Hydro Scheme and was influenced by the number of Europeans working on the scheme and their desire to make use of the snow during winter.Each Seal skin has: Seal skin sewn onto one side of a strap of webbing. There is a webbing loop on the front that slips over a small point at the front of the ski. There is a webbing strap attached to the back of the seal skin sole coming over the back of the ski that clips metal fasteners onto a loop of webbing behind the boot.skiing. snow. high plains. seal skins. cross country skiing. alpine sports.

This Gunter’s Chain, an old land surveying instrument, is named after its inventor, Edmund Gunter (1581-1626), an English mathematician and astronomer. It was first produced in 1620. The tool has 100 links and is 66 feet or one chain long. The links are marked off in groups of ten by metal rings or tags. A quarter chain (25 links) is called a rod or pole and ten chains make a furlong and 80 chains make a mile. The traditional cricket pitch is 22 yards or one chain long. This Gunter’s Chain is of considerable significance because: 1. It is an early land measuring tool that was used for over 250 years and has great historical and mathematical significance. A Gunter’s Chain would have been used when forming and building local roads from the earliest days of settlement. 2. It has a possible local connection as it was given to the Historical Society by a local person in 1965 and possibly came from the property of ‘Rosehill’ This is a metal tool which consists of 100 metal pieces or links joined together by loops at each end with two metal loops in between each link. The links joined together form a chain. The two ends of the chain have small metal handles attached At intervals along the chain there are additional rings or metal pieces attached. Some white and green rope material has been used to bundle up the chain. The metal is somewhat rusted. gunter’s chain, land measurement tools, history of warrnambool

A Gunter’s Chain, an old land surveying instrument, is named after its inventor, Edmund Gunter (1581-1626), an English mathematician and astronomer. It was first produced in 1620. The tool has 100 links and is 66 feet or one chain long. The links are marked off in groups of ten by metal tags or rings. A quarter chain (25 links) is called a rod or pole and ten chains make a furlong and 80 chains a mile. The traditional cricket pitch is 22 yards or one chain long. This chain is said to have been used by Gilbert Nicol when the Warrnambool to Hamilton Road was constructed in the 19th century. Gilbert Nicol was an early settler in Warrnambool who, with John Craig, established the first hotel (and the first building) in Warrnambool in 1847. Nicol later owned the property ‘Rosehill’ in the Warrnambool area. As the chain was given to the Warrnambool and District Historical Society by the Town Clerk, Keith Arnel, it is likely that the chain was one of the items in the old Warrnambool MuseumThis Gunter’s Chain is of importance because it is an early land measuring device that was used for over 250 years and has great historical and mathematical significance. If it is correct that it was used by Gilbert Nicol when the Warrnambool to Hamilton Road was built then it has considerable local significance and dates back to the 19th century. This is a metal tool which consists of 100 metal pieces or links joined together by loops at each end with two metal loops in between each link. The links joined together form a chain. The two ends of the chain have small metal handles attached. At intervals along the chain there are additional rings or metal pieces attached. The metal is very rusted.gunter’s chain, land measurement tools, history of warrnambool

This candle holder has a sharpened point to push or hammer into soft rock and a hook to hang on a ledge or piece of rock. It is intended to be used in a mine and many residents of Warrnambool and district went to the gold mining districts in the 19th century. But it could have been used in the Warrnambool district if a small night light was required in one of the many local quarries or even in the search for coal deposits in the region. It could also have been used in a household.This miner’s candle holder has no known local provenance but it is retained as an interesting example of a candle holder used in the past.This is a thin piece of metal tapering to a point at one end and curving around in a loop at the other end to make a handle. Along the straight metal piece is attached a curved metal hook. At the end of the loop is an open-ended circular piece with a serrated top. The circular piece has a rectangular-shaped end piece which enables the hole in the curved piece to be pushed out or pulled in to make the hole smaller or bigger. The metal is much rusted. 19th century mining, history of warrnambool

These braces of the type known as ‘Police & Firemen’ were originally worn mostly by men wearing a uniform of some sort – police, firemen, members of the armed forces, postmen, other government officials etc. Later the braces were worn by men, mainly workmen, wanting a durable, good quality item to hold up their trousers. Braces are still worn occasionally by men today, mainly as a fashion item. These braces have no known local provenance but are retained as an example of an item of clothing worn by men 100 years ago. These men’s braces have a loop of long heavy quality elasticized cotton held at the top with a metal clip and with the loop forming two long ends made by a leather clamp near the top. The ends of the two cords have metal clips and two leather straps at each end with eyelets for attachment to buttons. The top of the loop also has two leather straps with eyelets. The cords or loops are adjustable and are woven in red, blue and cream patterns. Police & Firemenvintage men’s wear, history of warrnambool

Digital TIFF file Scan of 35mm Kodak Plus-X Pan black and white transparencycity loop, melbourne underground rail loop (murl), railway construction, tunnel

Digital TIFF file Scan of 35mm Kodak Plus-X Pan black and white transparencycity loop, melbourne underground rail loop (murl), railway construction, tunnel

Digital TIFF file Scan of 35mm Kodak Plus-X Pan black and white transparencycity loop, melbourne underground rail loop (murl), railway construction, tunnel

Digital TIFF file Scan of 35mm Kodak Plus-X Pan black and white transparencycity loop, melbourne underground rail loop (murl), railway construction, tunnel

A postcard in a series produced by the Rose Stereograph Company in Victoria, Australia as a souvenir of Marysville.A black and white photograph showing trees and tree ferns, taken along the Michaeldene Trail near Lady Talbot Drive in Marysville in Victoria. The Michaeldene Trail is a level two loop that leads to the Taggerty River Lookout and may be undertaken as either as a Short (2.7 km) Loop, or a Long (4.3 km) Loop - 30 minutes to one hour and a half. The attractive bushland linking the Steavenson and Taggerty Rivers allows walkers and cyclists to step back in time to Marysville’s historic logging past. Sections of this mostly flat circuit follow old tramline alignments, which in places reveal the original timber sleepers on which the big logs were transported to the nearby sawmill.The Taggerty River Lookout offers views over the Taggerty River. The Trestle Bridge was built to span a small gully and provide access to the timber on Red Hill. Lady Talbot Drive is a 24 kilometer scenic rainforest car journey which passes a number of walks and waterfalls in the Yarra Ranges National Park. Lady Talbot Drive is named after Lady Sarah Elizabeth, the wife of Sir Reginald Talbot, who was the Governor of Victoria from 25th April, 1904 to 6th July 1908. This postcard was produced by the Rose Stereograph Company as a souvenir of Marysville.REAL PHOTO POST CARD THE "ROSE"SERIES DE LUXE PRODUCED IN AUSTRALIA Published by "The Rose Stereographs" Armadale, Victoria.marysville, victoria, michael dene, michael dene track, p. 2307, walking track, rose series postcard, postcard, souvenir, lady talbot drive, sarah elizabeth talbot, sir reginald talbot

A postcard in a series produced by the Rose Stereograph Company in Victoria, Australia as a souvenir of Marysville.A black and white photograph showing trees and tree ferns, taken along the Michaeldene Trail near Lady Talbot Drive in Marysville in Victoria. The Michaeldene Trail is a level two loop that leads to the Taggerty River Lookout and may be undertaken as either as a Short (2.7 km) Loop, or a Long (4.3 km) Loop - 30 minutes to one hour and a half. The attractive bushland linking the Steavenson and Taggerty Rivers allows walkers and cyclists to step back in time to Marysville’s historic logging past. Sections of this mostly flat circuit follow old tramline alignments, which in places reveal the original timber sleepers on which the big logs were transported to the nearby sawmill.The Taggerty River Lookout offers views over the Taggerty River. The Trestle Bridge was built to span a small gully and provide access to the timber on Red Hill. Lady Talbot Drive is a 24 kilometer scenic rainforest car journey which passes a number of walks and waterfalls in the Yarra Ranges National Park. Lady Talbot Drive is named after Lady Sarah Elizabeth, the wife of Sir Reginald Talbot, who was the Governor of Victoria from 25th April, 1904 to 6th July 1908.REAL PHOTO POST CARD THE "ROSE"SERIES DE LUXE PRODUCED IN AUSTRALIA Published by the Rose Stereographs Armadale, Victoria. Tomorrow is your Official day/ I believe. So Very Very many happy/ returns, & best of luck & good/ wishes from/ your May I rec'd this on/ 1st. (illegible)/ thought it a good snap of our ferns.marysville, victoria, michael dene, michael dene track, p. 2307, walking track, rose series postcard, postcard, souvenir, lady talbot drive, sarah elizabeth talbot, sir reginald talbot

RAAF uniform worn by Squadron Leader Ian A. 'Joe' Lyons, Operations Officer for No. 77 Squadron. Part of the Ian A. 'Joe' Lyons MBE Collection. See Catalogue No. 5374P for details of his service record..1) RAAF uniform jacket, dark blue in colour. Black fabric inner lining. Gold coloured buttons. Coat has two button down breast pockets and two button-down side pockets. Dark blue fabric belt with metal buckle is threaded through two belt loops. Three rows of service ribbons including an MBE ribbon and pilot officer's wings on left hand breast. Rank insignia on the bottom of each sleeve. .2) Dark blue fabric trousers with two side pockets, belt loops and button fly. Buttons for braces on the inner waist band. .3) Dark blue fabric tie. Manufacturer's label on keeper loop..1) On label sewn into neck: 'M TX'. .2) On label sewn onto inside waist band: ' M TX'. .3) On keeper: Trent Nathan'.uniform, raaf, ian a. 'joe' lyons