Showing 100 items
matching round shaft
-
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Hypodermic syringe and needles used by Dr Mitchell Henry O'Sullivan
Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Hypodermic glass syringe (.1) with three hypodermic needles (.2 - .4) and metal storage case (.5 - .6). Barrel of syringe is marked from with measurements from 0-20. .2 is a needle head with a rounded flange tapering towards the needle shaft. .3 and .4 are needle heads with flattened oval bulbs, attached to a round bead which holds the needle shaft. The case is oval in shape with the word 'Crystal' engraved diagonally into the top of the lid. There are two fixings attached inside the bottom of the case which form a cradle for the storage of the syringe.'Crystal' -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Broad ligament needle associated with Dr William Geoffrey Wicks
This needle was owned and used by Dr William Geoffrey Wicks and was referred to as a "boomerang needle". [source: Curator Sue Barnett, 2000] The needle is similar to Ralph Worralll's broad ligament needle, page a/210, Felton, Grimwade & Duerdins catalogue 1948.Broad ligament needle with slot eye. Distal end of metal shaft tapers at an angle to a needle point. Proximal end of needle shaft forks to create a handle shape with a rounded bulb at the end. Underside on needle is stamped "J.AUSTIN" and "STAINLESS". "J. AUSTIN" "STAINLESS"surgery -
Flagstaff Hill Maritime Museum and Village
Wheel
This 10-spoked ship's wheel would have used to steer on a large ship due to its size.Wheel wooden and brass, from a large ship. Brass hub and trim around circumference of wheel. Column-like spokes, with usual rounded handles (10 spokes) around outside of wheel. Heavy wooden centrepiece with metal backing and shaft (broken).flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's wheel, 10 spoke ship's wheel, navigation, ship's steering, marine technology, ship's fitting, navigation equipment -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Surgical scraper used by Dr Michael Kloss, Jetter and Scheerer
... handle section, a short, thin shaft and a small, round scoop..., round scoop at the end of the shaft. The handle at the proximal ...The '3' on this instrument indicated it was size 3. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal scraper. Instrument consists of a large, six sided handle section, a short, thin shaft and a small, round scoop at the end of the shaft. The handle at the proximal end is in the shape of an elongated teardrop, hollowed out at centre. The number '3' is engraved on the shaft of the instrument. The shaft is also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'3'obstetrics -
Bendigo Military Museum
Equipment - SHIPS PROPELLAR RAN, Thales Bendigo, C.1990
This a large item as per the dimensions. Due to the placement behind a large glass cabinet makes getting a decent image due to all the background light and other material. The plaque goes a long way to an explanation. This item is on display in the front Foyer entrance of the Bendigo District RSL Sub Branch in Havilah Road. Refer also Cat No 8177 for propellor and shaft..1) Plaque silver colour with black writing re the details of the making of this ships propellor for the RAN. .2) Typical propellor blade shape with a round base with countersunk holes in for attachment to the main ships system.brsl, smirsl, bdrslinc, propellor -
Stawell Historical Society Inc
Photograph, Horse driven Mining Whim. c1860
Horse driven Mining Whim used to raise and lower cages containing men and dirt up and down the shaft. The rope winds around the drum and is attached to a pulley over the shaft then goes down the shaft.Wooden Barrel of whim over round track with horse at front. Whim raises and lowers kibbles of dirt or cages of men up and down shaft. Four men standing in picture looking at camera. Shaft is on right of photo.stawell -
Bendigo Historical Society Inc.
Photograph - HILDA HILL COLLECTION: BLACK AND WHITE PHOTOS, 1925
Hilda Hill Collection.Series of Black & White Photos Hill Family & Friends Total 5 Photos. Clem & Jim out bush, both boys are wearing dark coloured shorts and long socks boy on left has white stripes at top of the socks with braces white shirts bottom right corner shows a piece of barb fence wire. 'Babe' Noonan contemplating hatless and wearing a white dress and dark stockings, Bill Hill (lady) by lake wears round top hat with the front brim turned up white dress highlights on the lapels black belt with a black bag attached columbine pattern on her stockings standing on dam bank background is forested area. Family Group 'The Push' made up of 7 young ladies and 4 boys one of which wears a hat one girl is dressed in black all others are in white on girl is wearing a hat with another on the ground beside her girl front right has a s part black bag hanging around her neck. Hilda Hill on 2 steel wheeled apparatus with long shaft at the front being held by a man dressed in grey suit with white shirt and dark tie another man is standing rear right of the girl also wearing grey suit white shirt and dark tie, Mid left side shows a heavy wheeled cart loaded with full bags at Summer Hill March 8, 1925. rear background has large willow tree, right background shows corner of large shed and haystack Also noted in pencil -At The Pines 1919. There is also a photo of two ladies facing the camera both wearing hats one light and the other dark colours lady on left is wearing dark jacket over a white dress lady on right wearing white dress and long tress forward over her shoulder two other ladies have their backs to the camera both wearing white one has black sash at her waist and head coverings, The venue appears to be a large dam and background shows far shore and bushland.Hilda Hill Personal Collectionaustralia, history, post war life -
Flagstaff Hill Maritime Museum and Village
Equipment - Horse Harness, Glenn's Leather Goods, Early to mid-20th century
The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This dray harness is a plain, basic harness and reflects its working class origins. It was used by Mr. Oswald (Jack) Bourke with his horse and dray to firstly deliver drygoods from Sunbury to Melbourne in the 1930's and later (through the 1940's and 1950's up to 1961) when he worked on the garbage round for the Springvale City Council. This horse harness is a significant example of the equipment that was needed wherever horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used with a horse and dray circa 1930's to the early 1960's. It is made up of a number of components. 1. A leather bridle with metal buckles and rings, blinkers and a metal single jointed, snaffle bit that has the initials M B stamped onto the leather. 2. A leather bridle with metal buckles and rings and a metal "straight bar" Eggbut snaffle bit. It has an elongated X design (with 4 dots) stamped onto the leather strap holders near each buckle. 3. A blue and white vinyl halter with one leather patched strap. The nose band and a chin strap are covered with woollen padding. 4. A pair of leather shaft protectors. They have lacing holes along each edge and a repeating design of small shapes (flowers, wings, crosses and arrowheads) which run along the front of each protector. 5. A leather strap with a stainless steel chain and catch and a maker's mark for "Glenn's Leather Goods, Pearcedale Victoria" stamped onto the end. 6. A wide leather strap covered with a webbing sleeve. It has two large metal rings and each end and one ring has a rope attached. 7. A leather strap comprised of three separate sections (two shorter and one longer) joined with two metal rings. The longer section has notches along its length and the shorter section at the other end has a buckle. It also had a maker's mark stamped on it but the mark is very worn and the writing is difficult to read. 8. An adjustable leather horse collar with two buckles and straps at the top opening and two "B's" stamped into the leather. The top of the collar is made from treated leather pieces stitched together and the underneath of the collar is untreated leather. It has a padded indentation running all the way around the collar for the hames to sit in. 9. Two pairs of long leather traces - each having a buckle and notched section at one end and each one is made with three lengths of leather spliced together. 10. A leather strap (with one spliced join) belonging to a horse harness with two shorter straps (each ending with a metal clip) attached to a steel D ring at one end. 11. Three assorted short leather straps - the top one has clips at each end and a buckle (for adjusting the length) in the centre, the middle strap has notches and a buckle and the bottom strap is white with notches and a buckle.Bridle with blinkers - "M B" Bridle - design showing an elongated X with a dot in each section stamped onto strap holder Shaft Protectors - stamped design of flowers, wings, crosses and arrowheads Strap with chain - "Glenn's leather goods / Pearcedale / Victoria" Leather Strap (with two metal rings) - Maker's stamp - "name indecipherable / SADDLER / ...OURNE" Collar - "B / B" Leather strap - flagstaff hill maritime museum and village, warrnambool, great ocean road, sunbury, springvale, dray, delivery dray, harness, horse harness, horse drawn vehicles, working horse, oswald (jack) bourke, bridle, horse collar, hames, shaft protectors -
Bendigo Historical Society Inc.
Document - NEW CHUM & VICTORIA LINES OF REEF - NEW CHUM & VICTORIA MINE MANAGER'S REPORT
Handwritten notes on New Chum & Victoria Mine Manager's Report. Dates 1878 and 1879. Wm. H. Grainger Mine Manager. Items mentioned are: amount of firewood, winding engine, mishap towinding gear, winding engine driver mistake, flat ropes, rope breaking, Directors deciding to replace flat ropes with round ropes, water laid on from main to mine, Directors decided to throw out present winding gear, old machinery being pulled down and all work stopped except repairs to shaft and alterations to pithead pulleys.document, gold, new chum & victoria lines of reef, new chum & victoria lines of reef, new chum & victoria mine manager's report, wm h grainger, messrs mitchell of melbourne, north old chum, mitchell & osborne, middleton safety hooks, ar -
Bendigo Historical Society Inc.
Tool - PITTOCK COLLECTION: THREE HAMMERS/MALLETS
Pittock collection: three hammers/mallets * one timber mallet. well used, with hardwood handle and mallet head. Marked Pittock in red on the mallet head. 285 mm L x 160 mm & 60 mm round * rubber mallet with hardwood shaft. 300 mm L x 90 mm W & 50 mm round * steel headed hammer with hardwood shaft. 290 mm L with100 mm L 35 mm steel head Items stored in Pittock coach builder's box, reference 13000.1.