Part of the Cooper Collection. See Catalogue No. 9586.2 for details of service for "Keith Cooper" No. 3798359.1. DFSM ribbon with silver coloured rosette. Ribbon is mounted on green felt. 2. Hinged wooden box. Gold coloured plastic plate on lid of box. Plate has black text engraved.2. Engraved on plastic plate: "DFSM CLASP for 20 years service by the Australian Defence Force, 3798358 WO2 K. E. Cooper.cooper collection, keith cooper, defence force service medal, medal ribbon

An article from the Melbourne Legacy Bulletin on the death of Legatee John Cooper (President of Melbourne Legacy in 1968). The article is a reprint of Legatee Kemsley oration at the funeral on 2 April 1980 at St Andrew's Anglican Church Brighton. The Bulletin published articles on Legatees when they passed away. Legatee John Cooper, born in 1919 and died in 1980. During his war service he served in 2/4th Field Regiment with 7th Division in PNG and Borneo, gaining the rank of Lieutenant. He joined Legacy in 1951 after being nominated by Legatee Dudley Gallagher. The article was part of an album of past presidents from 1965 to 1989. The folder included biographical details and obituaries, eulogies and death notices of prominent Legatees. The items have been catalogued separately.A record of Legatee John Cooper a past president of Legacy. The information was collected to record the lives of prominent legatees in a folder.Typed copy of a page from the Legacy Bulletin on the death of Legatee John Cooper - President 1968Bulletin No 2481. 8.4.1980. Page No 1 and 2past presidents, vale, john cooper

Certificate presented to Keith Edward Cooper on his promotion to Warrant Officer on 21 May 1986. Part of the Cooper Collection. See Catalogue no 9586.2 for details of service for " Keith Cooper" no 3798359.Framed certificate Framed Certificate on cream coloured card. Australian Army insignia at top. Lettering in red and black type. Frame is black coloured wood with gold border. Non reflective glass covering certificate. Cord for hanging attached to back of frame.Added in black type -recipients name and date:'KEITH EDWARD COOPER, 21st May 1986.' Handwritten on bottom right hand corner:'Signature'.cooper collection, keith cooper, warrant officer, certificate

Folder contains copies of the WW2 service records of "Arthur Ward Cooper" VX132160 and "Lawrence Arthur McCormack" VX61585. Also 'Certificate of Discharge for A.W. Cooper'. Part of the Cooper Collection.Plastic covered display folder. Thirteen (13) pockets containing A4 sized copies of two WW2 service records.Handwritten in black ink on a white sticker attached to front cover; “WAR RECORDS, ARTHUR WARD COOPER VX 132160” “LAWRENCE ARTHUR McCORMACK, VX61585”arthur ward cooper, lawrence arthur mccormack, ww2, service records, cooper collection

Tawonga is in the Kiewa Valley where farmers lived with their families. The school was opened on 27th July 1880 situated on 8 acres near the current township of Tawonga. This school was erased by fire in 1900 and all records were destroyed. The school then moved to the old Tawonga Hall. In 1910 the school was shifted to its present site on 3 acres of land donated by Frank Cooper. The school building and attendance continued to grow especially during the construction of the Kiewa Hydro Electric Scheme. Historic: Tawonga Primary school has educated the local farming and town children for many years. It is an excellent source of the names of the local families in 1903. The photo is taken outside the Old Tawonga hall where the school was situated in 1903 and shows the clothing worn by children and teachers at the time.Teacher and 20 students in school photo. "Tawonga Primary School 1903" added digitally when the photo was copied. There is a typed list of all names.Names of students. Back Row: Charlotte Cooper, John Cooper, Ada Cooper, Thomas Hollands, Irene Roper, Stewart Hollands, Lily Barnette. Teacher Donald Mc Cance. Centre Row: Edward Trebilcock, Alfred Hollands, Pearl Barnette, Frank Cooper, Nellie Higginson, Bert Roper, Reg Roper. Front Row: Ben Cooper, Raymond Cooper, Myrtle Barnette, Lewis Crotty, John Creamer, Annie Hollandstawonga primary school. education. kiewa valley. cooper family

Notes on events attended by the President in 1968. The President in 1968 was John Cooper, he wrote briefly with some useful tips. The presidential year ran from March to the following February. Was in a binder of documents that is passed from an outgoing President to the incoming President. It is primarily from the 1930s to 1990s. Most documents are being catalogued separately.A record of the duties of the President in the 1960s.White foolscap paper x 2 pages with black type about the President's commitments in 1968.Signed in blue pen on second page 'John Cooper'.presidents, john cooper

Authority from Rupert Vance Moon, licenced Real Estate Agent of Dennys Lascelles, for Norman George Cooper of Cobden to act as his sub-agent.Authority from Rupert Vance Moon, licenced Real Estate Agent of Dennys Lascelles, for Norman George Cooper of Cobden to act as his sub-agent.wool sales - auction system, dennys, lascelles limited, moon, mr rupert vance - dennys lascelles limited wilson, mr norman george

WW1 ribbon bar belonging to Adde Cooper Soldier from Chiltern, service number 5002. WW1 Ribbon bar (trio) belonged to Adde Cooper, a,soldier from chiltern in the WW1 Campaign.WW1 Ribbon Bar belonging to Adde Cooper. Consists of : 1914-1920 Star, British War Medal and Victory Medal. Metal bar at the back with two studs for attachment to uniform above pocket (left side). chiltern, chiltern shire honor roll, ww1

Norm Cooper served in WW1 then worked in the State Electricity Commission (Victoria). He lived in Ringwood (later Balwyn) played football, cricket, tennis and was a member of the Children's Hospital Auxiliary. Collection donated by Annette Rattray - a distant relative.Obituaries and photographs relating to the life of Norman H. Cooper. Collection includes summary of Military Service and association with Ringwood branch of the Victorian State Electricity Commission.

Discharge Certificate for "Keith E. Cooper" relating to service in the Army between 22-4-1970 and 9-12-1971. Part of the Cooper Collection. See Catalogue No. 9586.2 for details of K.E. Cooper's service.Certificate of Discharge AAF-A16, register No.P113828. Certificate is attached to a brown buckram covered cardboard folder. Australian Coat of Arms and Title on front cover in black type. Recipient's details including name, rank, postings, medals and enlistment and discharge dates. Print in black type. Signatories in black and blue pen.Recipient's details included in black type. Main details: No. 3798359 "Keith Edward Cooper". Handwritten in black ink on inside front cover: 'SERVED FROM MARCH '71 TO OCTOBER '71 IN VIETNAM.cooper collection, keith e cooper, discharge certificate, vietnam war

Dated July 14th 1899. Sent to Mr W. Cooper / c/o Mr Barrie / Storekeeper / No. 2 Valley / Chiltern / "Copy of Land Act 1896 / Regulations. Chapter XI Thinning Licenses"Document on stiff paper. Letter to Mr W. Cooper granting license to thin trees on a block of land at Chiltern Reserve. On back, copy of Land Act Regulations 1890"Department of Lands and Survey. On Forest Business"license, timber felling, cooper family, forestry, chiltern reserve

Part of the Cooper Collection. See Catalogue 9586.2 for details of service for "Keith Cooper".Pewter tankard with handle. Hammer tone band around middle. Recipient's name engraved on side.Engraved on side of tankard: '103 EME Coy, Sgt Mess, SSGT K.E. Cooper, 1985. Stamped on base: 'KIRRA' PEWTER - LEAD FREE! Stamped on base: PEWTER PRODUCTS P/L, MELBOURNE, AUSTRALIA.cooper collection, keith cooper, memorabilia

Table of Contents: Editorial, A hydro-electric scheme for Tasmania, Ore crushing and re-grinding, Dust breathing, Cyanide practice, Mr James Oddie, Mining, The estimation of caustic lime, Some geographical features of Ballarat, Art school notes, Chemical notes and abstracts, Mica and mica compounds used in Dynamo Insulation, Rock drills, News and notes, Correspondence, Sports, Past students, Editorial notes, Procession and theatre party, Answers to correspondents. Images.Booklet of 26 Pages.hydro-electric scheme for tasmania, ore crushing and re-grinding, dust breathing, cyanide practice, james oddie, mining, estimation of caustic lime, geographical features of ballarat, art school notes, mica and mica compounds used in dynamo insulation, rock drills, alumni, j. andrew wauchope, wilfred b. avery, f. brinsden, b. h. bennets, e. bieske, j. r. booth, a. s. coyte, h. b. cooke, t. a. cooper, t. e. copeland, leslie coulter, j. dickinson, g. h. davenport, w. e. eyres, e. frazer, w. e. figgis, g. govett, j. a. grant, e. gregory, a. a. gibson, w. gelard, e. c. hurdsfield, o. e. jager, oliver jaeger, herbert a. krause, w. kingston, h. r. kofoed, f. a. marriot, h. s. martin, d. mcdougall, c. w. nash, j. a. reid, s. h. sheppard, j. sutherland, w. t. sayer, g. sides, e. trend, rupert m. vaughan, s. b. vial, c. h. bale, o. c. witherden, e. m. weston, l. a. westcott, j. watson, j. worthington, william baragwanath, c. c. corrie, r. g. walker, g. g. sams, r. a. j. roberts, r. blight, j. cornell, v. booth, l. johnson, f. retallack, r. tinworth, r. roberts, h. whittingham, frederick j. martell

A history of Canterbury Cricket Club from 1887. Each chapter dedicated to a decade through to the 1980's. Includes appendices and results, awards, achievements. 58p. photosA history of Canterbury Cricket Club from 1887. Each chapter dedicated to a decade through to the 1980's. Includes appendices and results, awards, achievements. 58p. photosFrontis page: Given to Surrey Hills Historical / Society 15/7/14 / Simon Gardiner(mr) simon gardiner, (mr) sid mackie, (mr) keith silvers, (mr) len larkin, (mr) clyde ingram, (mr) frank gion, cricket, sport, (mr) n nesbit, (mr) s bisset, (mr) w grubb, (mr) r falconer, (mr) f leach, (mr) - slater, "tuss" curtis, (mr) stan self, (mr) maurie webb, (mr) norm shores, (mr) geoff matthews, (mr) wally bates, (mr) t mackie, (mr) harry swan, (mr) r mcconchie, (mr) r vaux, (mr) a pearson, (mr) - walduck, (mr) mick maguire, (mr) bob trengrove, (mr) lindsay ridgwell, (mr) john mccarthy, (mr) ewan mccarthy, camberwell union cricket club, canterbury cricket club, (mr) s parry, (mr) w lauchlan, (mr) e yeomans, (mr) a cooper, (mr) h gates, (mr) - gittus, (mr) f sheppard, (mr) - walker, (mr) a abud, (mr) - bishop, (mr) a. leach, (mr) - edgoose, (mr) - allan, (mr) a brooks, (mr) c swan, reporter competition, north balwyn, mont albert, (mr) s stevens, (mr) j carlson, (mr) c yeo, (mr) e hosken, (mr) j smart, (mr) n booth, (mr) l warmbrun, (mr) w lachlan, deepdene, canterbury, box hill, surrey hills, eastern suburbs cricket assoc., (mr) t alway, (mr) k briggs, (mr) n thackeray, (mr) r rudd, (mr) r littlefield, (mr) (cr) r dimmick, (mr) g guiver, (mr) t cameron, (mr) ian coles, (mr) gerry hegarty, 1960-1969

A history of Canterbury Cricket Club from 1887. Each chapter dedicated to a decade through to the 1980's. Includes appendices and results, awards, achievements. 58p. photosA history of Canterbury Cricket Club from 1887. Each chapter dedicated to a decade through to the 1980's. Includes appendices and results, awards, achievements. 58p. photos(mr) simon gardiner, (mr) sid mackie, (mr) keith silvers, (mr) len larkin, (mr) clyde ingram, (mr) frank gion, cricket, sport, (mr) m nesbit, (mr) s bisset, (mr) w grubb, (mr) r falconer, (mr) f leach, (mr) - slater, "tuss" curtis, (mr) stan self, (mr) maurie webb, (mr) norm shores, (mr) geoff matthews, (mr) wally bates, (mr) t mackie, (mr) harry swan, (mr) r mcconchie, (mr) r vaux, (mr) a pearson, (mr) - walduck, (mr) mick maguire, (mr) bob trengrove, (mr) lindsay ridgwell, (mr) john mccarthy, (mr) ewan mccarthy, camberwell union cricket club, canterbury cricket club, (mr) s parry, (mr) w lauchlan, (mr) e yeomans, (mr) a cooper, (mr) h gates, (mr) - gittus, (mr) f sheppard, (mr) - walker, (mr) a abud, (mr) - bishop, (mr) a leach, (mr) - edgoose, (mr) - allan, (mr) a brooks, (mr) c swan, reporter competition, north balwyn, mont albert, (mr) s stevens, (mr) j carlson, (mr) c yeo, (mr) e hosken, (mr) j smart, (mr) n booth, (mr) l warmbrun, (mr) a webb, (mr) w lachlan, deepdene, canterbury, box hill, surrey hills, eastern suburbs cricket assoc., (mr) t alway, (mr) a briggs, (mr) k silvers, (mr) n thackeray, (mr) r rudd, (mr) c ingram, (mr) r littlefield, (mr) (cr) r dimmick, (mr) g guiver, (mr) t cameron, (mr) ian coles, (mr) gerry hegarty, 1960-1969

In 1903, an article in the Box Hill 'Reporter' noted that the Kew Flyer Cycle business had been started in 1893 by Harry F. Cooper, who was "the oldest cycle maker in the district". By 1903, the Kew Flyer business was located at 8 (later 14) Cotham Road where it was to remain an institution until its closure. Seven years later, W.D. Vaughan, in his 'Jubilee History of Kew, Victoria' (1910) wrote that: "Several cycling clubs have been born and died, suffering chiefly from the migration of the leading spirits in the organisations, but since 1900 the ‘Kew Flyer’ road race, instituted by Mr. H. F. Cooper, has been the cycling event of the year among local riders. It is run on the White Horse Road at Blackburn." Early newspaper reports record that distance of the Race was initially 10 miles but by 1906, the event was 15 miles, starting from the Travellers' Rest Hotel in Blackburn. Cooper's Kew Flyer business in Cotham Road introduced new technologies and models throughout its 56-years of operation. By 1908, it was claimed that the shop had been enlarged with new "workshops and [the] latest lathes and cycle building tools. [It] Is now one of the most up-to-date Cycle Works in Victoria". By the First World War, Cooper had expanded his business to include motorbikes with "Precision Engines". The Kew Flyer business and the annual road races continued through the War, even though a number of its staff left for the front. One of these was [Pte] Robert Charles Field Richardson, who joined the 6th Battalion, fought and was wounded at Gallipoli, and died of his wounds in a hospital in Alexandria, Egypt in 1915. In 1917, the death of Private H.S. Herbert was announced. He had been the winner of the Kew Flyer Cycle Road Race in 1913. He died in action in France, having fought at Gallipoli and in France at the Battle of Pozieres. The majority of bicycles advertised by Cooper were designed for men, although bikes for women and 'juveniles' were advertised as early as 1918, so they were probably manufactured throughout the period. Harry Cooper was to sell his Kew Flyer business in 1936, after 39 years of trading. The business he began continued until 1949.This is a very rare image [the location of the original is now unknown] of a Kew Flyer team. The photo was sourced and remained in the possession of the historian Dorothy Rogers, whose brother was an early member of staff in the firm. The photo is historically significant as it is the only known photograph of a Kew Flyer Team, and possibly the only known photo of Harry F. Cooper, the founder of the firm and a key figure in Victorian cycling history. Photograph, the second of two, from an earlier album photograph of the Kew Flyer Team in uniform with trainers and workers of the company. One of the men in the photograph is probably Harry F. Cooper, the proprietor of the Kew Flyer business in Cotham Road, Kew. Harry Cooper was the sponsor of one of the best known and oldest trader cycle races in Melbourne. The photograph remained in the possession of the Rogers family until its donation to the Society by John Rogers in 2015.Handwritten annotation by the historian Dorothy Rogers on reverse: "Kew Flyer Team from very old photo".kew flyer, harry f cooper, trader bike races - victoria - kew, kew flyer team

This bucket was made from vertical planks of wood with bands of metal around it for strength. Buckets such as this were made by coopers, who had expertise in making wooden barrels. Wood or animal skin was used to make buckets in colonial times when other materials were unavailable. Buckets had many uses in domestic and agricultural life including carrying, measuring and storing. Cooper tradesmen used carpentry and blacksmithing skills to make a wide range of wooden containers and other objects. They sometimes used water or steam to bend and mould the timber.The bucket is an example of a product made from wood and iron by an experienced Cooper. In early colonial timeswhen ready-made products were scarce so the trades of coopers, blacksmiths, metal smiths, carpenters, builders and others were necessary for domestic, commercial and industrial establishment.Wooden coopered bucket; three metal bands around vertical wooden planks that form the body of the bucket. Two lugs extend higher than the planks and have a rope joined between them.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, bucket, wooden bucket, container, domestic bucket, cooper, cooper trade, coopered bucket

An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. Adzes are used for smoothing or carving wood in hand woodworking, and as a hoe for agriculture and horticulture. Two basic forms of an adze are the hand adze (short hoe) a short handled tool swung with one hand and the foot adze (hoe) a long handled tool capable of powerful swings using both hands, the cutting edge usually striking at foot or shin level. Mathieson & Sons Maker: In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764.  The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Hand Adze or Cooper's adze No 4 A Mathieson & Sons Glasgowflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, adze mathieson & sons, cooperage tools, woodworking, barrel making, working timber, joiners tools, carpenters tools

Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder

Donated by Mrs Lockwood, Bonnie, formerly HamiltonBlack & white reproduction, unframed. Group of five in front of store owned by D.G. Hamilton. Store later was O. Gilpin, later Foy and Gibson, later still a hardware store owned by the late Fred Cooper, later demolished & at present the State Bank."D.G. Hamilton Store cnr Main & High Streets. Later O. Gilpin, later Foy & Gibson, Later Fred Cooper, then demolished for State Bank"d g hamilton, david hamilton, hamilton store

Jack and Kathleen Gervasoni ran the North Kew Authorised Newsagency at 93 Willsmere Road for 17 years. Peter Cooper and Niall McAllister where two of a multitude of paperboys who worked at the newsagency.Copy of colour photograph of two North Kew Rovers Footballers with City of Kew Mayor Cr John H. Gervasoni. Left to right: Peter Cooper, Jack Gervasoni, Niall McAllister at Stradbroke Park, Kewkew, gervasoni, jack gervasoni, mayor, team, sport, football, cooper, stradbroke park, peter cooper, neil mcalister, paperboys, j.h. gervasoni, niall mcalister

Part of the Cooper Collection. Plaque outlines the service of "K. Cooper' No. 3798359. See catalogue No. 9586.2 for further details of K. Cooper's service.Rectangular brown wooden plaque. Central to the plaque is a framed embroidered RACT unit insignia on a black background. Gold coloured metal frame with fitted glass. Five gold coloured plastic plates with engraved black lettering.Engraved on top plate: '3798359 WO1 K. COOPER'. Engraved on top LHS plate: 'AWARDS & DECORATIONS'. Vietnam Medal AUG 71, Vietnamese Campaign Medal 15 Oct 73, Defence Force Clasp 18 OCT 93, G.O.G. Commendation 08 FEB 90'cooper collection, keith cooper, plaque, ract

An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. Adzes are used for smoothing or carving wood in hand woodworking, and as a hoe for agriculture and horticulture. Two basic forms of an adze are the hand adze (short hoe) a short handled tool swung with one hand and the foot adze (hoe) a long handled tool capable of powerful swings using both hands, the cutting edge usually striking at foot or shin level. Mathieson & Sons Maker: In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicholson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicholson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tin men's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river Bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764. The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Coopers Adze steel with wooden handle No 194 A Mathieson & Sons Glasgowflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road