Use to identify a tramway employee, involved in equipment testing duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in equipment testing duties.Round pressed brass badge with the words "Tester" pressed into the centre of the badge, and around the top part "4 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, tramway board

This badge, which was used in the mid to late 1900's (Scouts started in Australia in 1909) clearly demonstrates that the families in the Kiewa Valley although slightly remote were still able to participate in one of the prime "boy" only social groups. The Boy Scouting movement brought together boys from all the socio-economic areas in the Australian population. The scouting group applied the concept of self sufficiency and friendship to all its membership. It was an avenue to cross the boundaries of distance and regional mores. Many of the boys in the Kiewa Valley and its regions would have been more "in tune" with the core principles of the scouting movement because being in a rural environment and "living on the land" was a day to day part of their life. What was an important aspect to they was the "mateship" and the belonging to a very large, and international, group of "like minded" boys. This avenue of interacting with a larger group of boys cut through the "small population" mores of a rural and at times isolated environment. This Boy Scouting activity was both mentally and physically significant to growing boys within the Kiewa Valley as it opened up the world to them.This brass badge has a front formed in a half circle base supporting a "Fleur de Leis" in a spear shape with "cut outs" at the appropriate places to provide the emphasis needed to project the form. Attached to the badge is a crescent moon shaped pronged frame for attaching the badge to lapels or collars or button eyelets. On the bottom scroll "BOY SCOUTS" and on the back type fastener "STOKES & SONS" below this "Melb".societies, boy scouts, apparel badges, numismatics badges

Belonged to Maxwell Lennox Matheson No 418447 RAAF. Refer Cat No 1959 for his service history.RAAF peaked cap. Dark blue with black leather band around brim and blackened brass RAAF badge on front."Made in Australia 1945"uniforms-raaf, costume-male-headwear, metalcraft

Dancing Devil hat badge was originally privately comissioned and purchased by members of 13th LHR circa 1916, in recognition that the 13th LHR was nicknamed "The Devils Own" This hat badge was unauthorised but still worn by members of the 13th Light Horse Regiment while on operations on the Western Front.An unauthorised hat badge of the 13th LHR used by members of the Regt while on operations on the Western Front.Brass Hat Badge, dancing devil with pitch fork above wreath with 13 ALH inscibed. Two lugs on rear."13 ALH" inscribed on base of wreathheraldry, badges, devils, aif, western front, light horse regiment

Alan Telford VX146055 enlisted in the 2nd AIF on 28.9.43 age 20 years. On discharge from the Army 13.2.46 he was a Pte in 41st Aust Landing Craft Coy. Refer 331.8, 332.2, 358.3, 359.3, 360.4P..1) Set of Metal Discs " ID " one round and one six sided joined by string. .2) Brass Blackened " Rising Sun Badge " .3) Brass Blacked " Australia " Shoulder Badge Curved in Shape.1) VX 146055 Telford A RCAL A2 .2) Australian Commonwealth Military Forces .3) Australiaidentity, badges, uniform

Item souvenired by Edwin James Jones No 3511 AIF. Refer 1367.5 for his service history.BADGE, Brass with the letters " SASC”, Lugs on rear with one pinnumismatics - badges, military history - army, metalcraft - brassware, jones

cotton beret with AMF with small brass rising sun badge

Use to identify a tramway employee, involved in managing tramway operations. Made by Stokes and SonsDemonstrates the method of identifying MMTB employees.Round pressed brass badge with the words "Control" pressed into the centre of the badge, around the bottom portion of the badge, the number "6". Has a nickel-plated finish with the MMTB initials on the top part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge to enable it to be worn on a uniform.badges, mmtb, controllers

The badge was issued to Thomas William Tuckerman No 7318, 2nd Australian Tunneling Company AIF. Refer 935P, 1265.3.Brass circular badge with Kings Crown at the top. Centre is the Rising Sun badge. The rear has two lugs for fixing to clothing.Around the face in raised lettering, ISSUED BY DEPT OF DEFENCE, RETURNED FROM ACTIVE SERVICE. The scroll on the Rising Sun has, AUSTRALIAN MILITARY FORCES. Under the Rising Sun is A.I.F. On the rear is stamped 110680r.a.s.badge 110680, tuckerman 7318, aif

The top Association badge is 46th Batt AIF. The bottom badge appears to be 14th Batt AIF. When the AIF was doubled in Egypt in 1916 the 14th Batt was split to form the 46th Batt. Badges were in the collection of Edwin James Jones No 3511 AIF. refer 1367.5 for his service history..1) Brass civilian badge with yellow and blue enamelled face and pin attachment on rear. 46th Batt AIF. .2) Brass civilian wishbone shaped badge with yellow and blue enamelled rectangular section and attachment pin on rear.societies-service clubs, metalcraft-brassware, unit association, jones

Brass A.I.F. hat badge depicting a rising sun with a crown inset.Australian Commonwealth Military Forces.numismatics, badges

Badge made for the MMTB for use by Senior Traffic Officers. Made by Stokes & Sons Melbourne.Demonstrates a MMTB Traffic Officer's pass.Badge - brass, pressed with blue enamel paint infill, number 24.passes, travel passes, tramways, employees, mmtb, officers, traffic officers

Use to identify a tramway employee, involved in delivery of messages, correspondence etc in the Eastern Suburbs system. Made by Stokes and SonsDemonstrates the method of identifying MMTB employees.Round pressed brass badge with the words "Messenger" pressed into the centre of the badge, around the bottom portion of the badge, the letters "ES". Has a nickel-plated finish with the MMTB initials on the top part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge to enable it to be worn on a uniform with a leather strap on a button.badges, mmtb, messenger

The 34th Infantry Brigade was raised in Moratai and consisted of three Infantry Battalions. Namely the 65th / 66th /and 67th Battalions. On the 23rd November 1948 they became the 1st, 2nd and 3rd Battalions. The Royal Australian Regiment became the key component of the new Australian Regular Army. The 34th Battalion 1RAR/ 2 RAR and 3 RAR saw service in WW11 in Korea and Vietnam.Gilded brass hat badge showing a round wattle wreath with "St Edwards" crown over a kangaroo and 2 crossed .303 rifles.Kangaroo and wattle are distinctly Australian - from the TAC signs of the parent units. Crossed rifles represents the infantry nature of the Regiment.

Lapel Badge Brass and Enamel Ex Naval Men's Association Kings CrownNumbered 4303

The 1st Royal Australian Naval Bridging Train (1st RANBT) was formed in Melbourne on 28 February 1915 and was intended to be a horse drawn engineering unit attached to the Royal Naval Division (RND), then serving as infantry on the Western Front. The term ‘train’, in its title, was a direct reference to the horse drawn wagons that would, in theory, form and move ‘in train’ to carry the unit’s heavy lumber, building materials and engineering equipment to the front. The unit was manned by members of the Royal Australian Naval Reserve for whom there were no available billets in seagoing RAN ships. Many of the sailors serving in the 1st RANBT were rated ‘drivers’, and again, this refers to wagon drivers as opposed to motor vehicle drivers. Other seamen were rated as ‘artificers’ or ‘sappers’, the latter being a military term traditionally used to describe army engineers. Appointed in command of the 1st RANBT was Lieutenant Commander Leighton Seymour Bracegirdle, RAN. Bracegirdle was ideally suited to command the unit, having seen active service with the NSW Naval Brigade during the Boxer Rebellion in China as well as serving as a military officer in the South African Irregular Horse during the Boer War in 1901. He had also recently returned from German New Guinea where he had served as a staff officer in the joint Australian Naval and Military Expeditionary Force (ANMEF) responsible for the capture of the German colonies in the Pacific in September 1914. Three hundred naval reservists, including 50 men who had recently served in New Guinea, were selected for the 1st RANBT and they began their training in horsemanship, engineering and pontoon bridging at the Domain in Melbourne. By late May 1915 a decision was made to send the unit to Britain to complete its training and then to join the RND on the Western Front. The plan, however, never eventuated. The complaints about the non-combatant work being done by the men had been raised in Federal Parliament and following consultation with the senior Australian officer in the Middle East, Lieutenant General Sir Harry Chauvel, a recommendation was made that the unit be disbanded and its men used as reinforcements for the AIF. Consequently, Lieutenant Commander Bracegirdle was advised that his unit was to be dispersed; its men transferring to the AIF or being returned to Australia for discharge. On 27 March 1917 the 1st RANBT was officially disbanded.Oxidised brass anchor shaped collar badge.ww1, world war 1, first world war, ranbt, ran bridging train, royal australian navy bridging train, collar badge

Badge produced by The Met to identify employees who were qualified trainers, mainly for Tram Drivers. They also undertook other training. Has the second version of the The Met logo on the top of the badge. Made by Lega Melbourne. See item 7900 for a Senior Depot Trainer badge.Demonstrates a The Met, Depot Trainer badge.Badge - enamel brass with a securing pin on the rear.badges, training, depot trainers, the met

Badge produced by The Met to identify employees who were qualified trainers, mainly for Tram Drivers. They also undertook other training. Has the second version of the The Met logo on the top of the badge. Made by Lega Melbourne. See also item 7899 for a Depot Trainer badge.Demonstrates a The Met, Senior Depot Trainer badge.Badge - enamel brass with a securing pin on the rear.badges, training, depot trainers, the met

Use to identify a Tramways Medical Benefit Society Committee Member and available for free travel on all lines on the Tramway Board and MMTB systems. The Medical Benefit Society or Tramway Friendly Society provided mutual benefit funds for cable tramway employees.Demonstrates the method of identifying Medical Benefit Society Committee members and providing them with free travel.Round pressed brass badge with the words "M.B. Socy Committee" pressed into the centre of the badge, and around the top part "34 - All lines" and the Tramway Board logo on the bottom. Two lugs have been soldered onto the rear to enable a leather strap to be fitted. Traces of black enamel paint that infilled the words remain. Second copy - slightly different layout - No. "7"badges, mmtb, cable trams, tramway board, medical, tbs

Collected by a soldier during the First World War.Brown webbing belt with 14 brass shoulder badges mainly from British Territorial regiments, an Australian shoulder badge and three metal buttons pinned to itVariousww1, world war 1, first world war, british, metal badges, shoulder badges, british regimental badges, australian shoulder badges

Items issued to John Raymond Bruns VX88627, refer Cat No 5592 for his service history..1) .2) Australia shoulder badges brass curved shape attached to cloth kahki colour to fit over shoulder button down. .3) .4) Australia shoulder badges brass curved shape with clip through on the rear.accessory, australia badges, 2nd 38th

Some are rare in natureBlue material - background, White timber frame surround with 18 metal military cap badges and 6 military cloth patches., Row 1 British Army Cap Badge - Royal Army Ordnance Corps. F1 Household Life guards, Cap Badge, Center G.R. below V. Oval with motto on outside Banner. Royal Lancashire Cap Badge.World War 1 R.F.C. - Royal Flying Corps Cap Badge. surrounded by Laurel Wreath with Crown on top. Circ. 1895 Royal Australian Air Force pilot's wings. The brevet has white cotton embroidered wings, a king's crown, and the letters 'R.A.A.F.' within a pale blue embroidered laurel wreath. Horse Badge - Small Brass - British Army Military. Saint George slaying he dragon - Small Brass Badge. Army Cyclist Corps - World War 1 Cap Badge. Duke of Wellington's Regimental Cap Badge. Row 2 Royal Inniskilling Fusiliers Corps 1895 = Shoulder Title - Officer's. Royal Horse Guards Brass Army Cap Badge. Brass Badge - Queen; Mary's Own - 18th Hussars. Vintage Royal Welsh Fusiliers Cap Badge. R.A. F. Service Dress Wings with King's Crown. American Eagle Brass - Army Officers Cap Badge. 45th Overseas Battalion - Canada Expeditionary Forces. 48th Battlion, Victoria, Canada - British Columbia Brass Cap Badge. World War 1. Row 3. Center World War 11 - Rhodesian Air Force Cloth Pilots wings . row 4 Center - Embossed Woven Crown with metal gold thread woven feathers under. Right - Embossed Woven Crown with Brass Gold Anchor below.- Navy Petty Officer Cap Badge. Row 5. Large Metal Gold color Crown - British Army Warrant Officers Badge. Small Brass Single Rifle with ACT on the Butt of the rifle. Brass Badge - Drummers Proficiency., Last Row - center Embossed woven Crown Red Felt on Blue Back.none - no labels6 cloth patches raised and embossed, 18 military brass metal cap badges vary in type and country and conflict.

Refer Cat No 4768.4Badge, brass curved shape “AUSTRALIA”, rear has two lugs for uniform attachment“AUSTRALIAbadges, australia, lapel

Used in Australian Army Slouch Hat/Cap. Used 1904 - 1949 (3rd Pattern)Brass Rising Sun Badge/General service badge for army slouch hat/cap. Australian Commonwealth Military Forcesarmy, badge

All Returned badges are individually numbered on the back and can be traced.Badge, brass, Returned from Active Service WW1, round shape with crown on top.Around edge: “Returned from Active Service & Issued by Dept of Defence” In centre: “AIF” Imprinted on back: “No 237619”badge, active service, military history

Returned from Active Service No (187814) ? William J HUMPHREY (46) ? Battalion AIF.Brass coloured metal badge imprinted with Rising Sun motif & printing. Crown on top.Around edge: “ISSUED BY DEPARTMENT OF DEFENCE, RETURNED FROM ACTIVE SERVICE” Inside circle: “AUSTRALIAN MILITARY FORCES AIF”badge, active service, returned

Items in the collection re Ian McLeod RWAFF, refer Cat No 2262.2 for service details..1) Badge, metal, brass, crown over tank, wreath "Fear Naught" .2) Badge, metal, brass, wreath, tank in centre scroll with "SHTC SATK"badges, collection, tanks

50th anniversary issued for AATTV. Round silver medallion centered with brass alloy badge AATTV. Boxed in black casing and includes certifivate of authenticity. No.00222 of 1000.The Team AATTV Perservere 50th anniversary(on back). B&W photo of Australian and Vietnamese soldier with wordsAATTV 50 Vietnamaattv, medallon, 50th anniversary

14972799, ASTON, Derg James Randell. Enlisted Worster (England) Ref 5400, 5402 Austria Occupational ForcesBadge, metal, brass insignia Austria Occupational ForcesCrown, Rose, Leaves Ïntelligence Corps"badge, military insignia, intelligence corp