Showing 129 items
matching kitchen wooden
-
Rutherglen Historical Society
Butter pat, 1950 (Approximate)
Piece of home churned butter was placed between the paddles and rolled into a ball for serving.Set of wooden butter pats, bat shaped, smooth on back - grooved on frontkitchen, food production, butter -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, Barry Sutton, 19.07.1972
Miss Kosch is a private physiotherapist contracted by RDNS. She is at RDNS Heidelberg Centre teaching RDNS staff a safe method of lifting and transferring Sr. Geldard from a chair. From the founding of the Melbourne District Nursing Society (MDNS) in 1885, known as Royal District Nursing Service (RDNS) from 1966, the rehabilitation of patients to insure they were able to live independently in their own homes was at the forefront of care given by their Trained nurses. As well as teaching and supervising the use of equipment, their Trained nurses taught them safe transfer techniques. These techniques were also taught to family members to enable them to care for their loved ones. RDNS at first held workshops given by a contracted private Physiotherapist before employing their own Physiotherapist in 1975 who taught staff the correct techniques, not only for safety of the patient, but to reduce physical strain on RDNS nursing staff and patient’s family members. When required the Physiotherapist accompanied the Sister on her visit to the patient in their home.Standing in the rear left of the black and white photograph is Ms Kosch, who has short curled dark hair and is wearing a check suit. She is looking down at Royal District Nursing Service (RDNS). Sister (Sr) Daphne Geldard, who has collar length curled dark hair, and is seated in front of her on a padded kitchen type chair. To Sr. Geldard's right, standing, is Sr Elizabeth Francis who has short dark curled hair and is bending forward with her arms outstretched under Sr. Geldard's armpits. She has her right leg braced against Sr. Geldard's right knee Sr Bev. Armstrong, who has short blonde hair, is standing at the right rear observing the procedure. The three Sisters are wearing a grey skivvie under a darker V neck tunic style dress with the RDNS insignia on the upper left. A black below knee boot is seen on Sr. Geldard's right leg. A closed dark wooden door with a white surround is behind Ms Kosch and to its right another chair is seen against the wall. Photographers stamp , names of staff, date and location. Quote KY 35rdns, royal district nursing service, rdns uniform, rdns physiotherapy, sister elizabeth francis, sister daphne geldard, sister bev armstrong, ms kosch -
Dandenong/Cranbourne RSL Sub Branch
Work on paper - A tribute from the Citizens of the Shire of Dandenong..."James Mathew McQuade"
Tribute Certificate from the Citizens of the Shire Of Dandenong.A tribute from the Citizens of the Shire of Dandenong..."James Mathew McQuade".... No 7038 23 Reinforcements 7th Battalion....Australian Imperial Forces... In appreciation of his Patriotism in Enlisted for the Service of the Empire in the Great War which began on 4th August 1914,..... Signed by President/Councillor/Shire Secretary,,,, Seal of The President Councillors & Ratepayers of the Shire of Dandenong. The certificate is surrounded by---Various flags including Union Jack and Australian Red ensign/ photographs of His Majesty the King, Right Hon.Sir Edward Grey Bt MD Lord Kitchener/ Actual Photograph of the beach where the Australian and New Zealanders landed landed at Gaba Gallipoli. Taken by Sergeant Robt.Carnie Inset is small view of the men landing from the boats. THE CERTIFICATE IS ENCLOSED IN A WOODEN FRAME -
Mont De Lancey
Domestic object - Fruit Pitter, D CARMICHAEL, c1920's
Used by Dianne McIntyre's grandmother c 1910 and possibly by an earlier generation too.Antique wooden handled metal fruit pitter with bevilled edges on both sides of the wedge shaped blade. Usually used for pitting peaches or apricots.D CARMICHAEL is stamped on the scoop.kitchen equipment, domestic equipment -
Glenelg Shire Council Cultural Collection
Photograph - Photograph - opalotype, Thomas Must, n.d
Possibly Portland Town Council. Thomas Must, a wealthy Sydney merchant arrived in Portland in 1845. In 1855 prospect was built for Must to a design by local architect George Mathewson. The two storey home was built in expansive grounds with sweeping views of Portland Bay and the township. The stuccoed house is of Regency/Italianate style with a single storey verandah and single storey kitchen wing. In 1878 the original posted verandah was replaced by new verandah and a conservatory to a design of architect Daniel Nicholson. Nicholson had also been responsible for the design of the Assembly Rooms at the London Inn. Thomas Must was active in the Portland Community. He was a Trustee of the Port Philip Savings Bank, a Justice of the Peace, Treasurer of St. Peters Church at Bridgewater and the first Chairman of the Portland Borough Council. Prospect was Thomas Must’s home until his death in 1905. The building has been considerably altered over the years and much of the original Italianate character has been lost. Subsequent owners include B. Cunningham, G.S. Beresford (who changed the property’s name to Waterford), and long-term Liberal Senator Sir Magnus Cormack. Cormack was President of the Senate from 1971 to 1974. In 1976 the Prospect became an aged accommodation centre.Wooden Frame - light brown. Gold inner frame. Fawn mount. Man with long white beard and hair facing right wearing dark jacket.Front: (no inscriptions) Back: (no inscriptions)photography, opalotype, thomas must -
Greensborough Historical Society
Kitchenware, Ladle, 1950s
Kitchen ladle, circa 1950s.Metal soup ladle with wooden handle painted red"Skyline"kitchenware, ladles -
Tatura Irrigation & Wartime Camps Museum
Model - Doll House, Koch's Doll House, 1941.1942
The dolls house and furniture was made by Heinrich August Ernst KOCH, who was interned at Orange NSW on the 6 June 1940. In 1941 was taken to Tatura VIC for an appeals tribunal hearing. He was released in 1943 to the Civil Alien Corp. The donor of the dolls house, John Smiles, is the grandson of Heinrich. Heinrich made the dolls house and furniture which he made for his daughters in Sydney NSW. It was sent to them whilst interned. The furniture is copies of real life size items and the house has features common with the family home in Sydney.Wooden, painted dolls house, made from packing crates. 5 main pieces with additional pieces (roof, chimney, stairs, outside roof area, furniture) which go together to form this long single story dolls house. Painted in cream with green features and red roof. Windows and doors open. Several windows have glass in them. Original piece of Lino in kitchen area. 2 rooms are wallpapered. Original pieces of furniture are included (see list attached to worksheet). These include dining table and four chairs, side board, dressing table, bed, tall boy, low boy, entrance table, entrance bench, entrance hall stand, kitchen table, 4 chairs and 2 benches.heinrich august ernst koch, john smiles, orange internment camp, tatura internment camp, civil alien corp -
Mission to Seafarers Victoria
Photograph - Photograph, Black and white, Bill Doyle (Reverend C.J. Eldridge-Doyle), 1960-1970
The photograph is part of a serie likely to have been taken by Bill Doyle (Reverend C.J. Eldridge-Doyle), who was a keen photographer like many of the chaplains as he often uses the Ilford paper to print his images. Photograph is part of the collection that has been accumulated at the Mission to Seafarers. It shows how the Mission was furnished at one time.Black and white photograph of a wooden chair against a tiled wall, possibly in or near the kitchen. To the left of the photo is a series of lockers.Reverse: ILFORD repeat print across the photograph. 1940 in red stamp.photography, black-and-white, mission-to-seafarers, chair -
Kiewa Valley Historical Society
Stand - Pot Plants or Kitchen storage
... in the kitchen to be on display / stored and/or indoor plants displayed ...Home decoration involved pots / saucepans / plates etc in the kitchen to be on display / stored and/or indoor plants displayed in a corner on the verandah. It was common for the stand to be home-made and practical.Used by a resident of the Kiewa Valley as a domestic kitchen storage stand or possibly for indoor plants.Tall wooden pot stand with 9 triangular shelves spaced along it and with hooks on 2 of the 3 edges. It has 3 wooden poles holding the shelves. The stand has previously been painted blue. Nine equilateral triangle shelves decreasing in size with height towards the top. Top has decorative cap with steel fringe. Rusty. It may have been used as a kitchen pot / saucepan / plates stand or pot plant stand.pot plants, indoor plants, home decoration, pot stand, kitchen storage -
Greensborough Historical Society
Domestic object - Egg-beater, Persinware, Swift Whip, 1950c
Used for beating eggs or other cooking mixtures.Egg beater, chromed metal with wooden handlesSwift Whip. A Persinware product made in Australia.egg-beaters, whisks, kitchen equipment -
Mont De Lancey
Domestic object - Butter Pats, Unknown
... as the butter was soft. Butter Butter pats Kitchen equipment Two vintage ...Butter pats were common from about 1850 - 1920. They were used to shape the butter into pieces instead of by hand as the butter was soft.Two vintage wooden butter pats, one pale wood with a shaped handle, the other is a dark piece of wood without a handle. Both have ribs on one side for the butter to be shaped.butter, butter pats, kitchen equipment -
Mont De Lancey
Functional object - Butter Churn, Unknown
Many butter churns were brought to Australia when people immigrated.A tall glass butter churn with a metal screw top lid, a metal handle to hold it steady and a turning mechanism on the top. There is a wooden paddle inside the churn which is rotated by a wooden handle attached to the mechanism on the top of the churn. German butter churns usually appeared like this.butter churns, churns, food processing equipment, butter, milk, kitchen equipmnet -
Greensborough Historical Society
Domestic object - Egg-beater, Propert, Swift Whip, 1932c
Used for beating eggs or other cooking mixtures.Egg beater, chromed metal with wooden handlesSwift Whip. A Propert product made in Australia Pat. Ball drive 9033/32egg-beaters, whisks, kitchen equipment -
Mont De Lancey
Domestic object - French Fry Cutter, Nutbrown Products
Since 1932 Nutbrown has been producing crafted kitchen products which were a staple in British homes. Nutbrown continues to be in production today.A vintage manual metal and plastic Chipper and French Fry Cutter with two blue turned wooden handles each side which are attached to folding crossed metal supports joined to a square frame. The frame has 36 small squares with sharp blades on the edges to cut the potatoes A yellow coloured plastic support with raised squares under the cutter holds the potato in place. This is screwed to the metal base. There are pieces of cardboard from the original packaging explaining the use.Underneath the yellow support is stamped: ' A Nutbrown Product Patented Made in England Registered design'.domestic objects, kitchen appliances, kitchen tools, vegetable cutters -
Flagstaff Hill Maritime Museum and Village
Domestic object - Ice Chest, 1927
This particular small ice chest was once part of the domestic furniture of Dr W.R. Angus and his young family in 1927 when they lived in the Nhill and Ballarat districts. The family relocated to Warrnambool in 1939 and brought the ice chest with them. An ice chest, also called an icebox or refrigerator, was invented by Thomas Moore in 1802 and had become a common home appliance from the mid-1800s until around the 1930s, when electric refrigerators became affordable and safe. The non-mechanical ice chest allowed perishable food to be kept fresh for longer than the food-safe or ‘Coolgardie’ used in colonial days in Australia. It required the use of ice blocks, which were delivered to households by the ‘iceman' and his horse and cart. The ice man would use an ice pick to cut the blocks into the right size for the buyer’s ice chest. The ice came from an ‘ice house’, a factory where the ice was made. The ice chest required a block of ice to be placed into the insulated top section on top of the corrugated iron stand. The ice would cool the air and the cool air would flow downwards through the oval hole under the stand and into the refrigerator compartment below. The water from the melted ice would drain from the sloping floor of the top compartment and into the hooded pipe. The pipe went through the refrigerator and ended below its floor, where the drained water would be collected in the metal bowl placed there for that purpose. The lip on the bowl allowed it to be easily removed and emptied at regular intervals before it overflowed. W.R. Angus Collection- The W R Angus Collection spans from 1885 to the mid-1900s and includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. He and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Dr Angus and his wife were very involved in the local community, including the early planning stages of the new Flagstaff Hill, where they contributed to the layout of the gardens. Dr Angus passed away in March 1970.This ice chest is significant for representing a method of refrigeration and food preservation used in the 19th to mid-20th centuries when people were beginning to afford powered domestic refrigerators. After the second world war, most households replaced their food storage cupboards and ice chests with refrigerator appliances. The ice chest is also significant for its connection with the domestic furniture of Dr W.R. Angus and his family, and its inclusion in the W.R. Angus Collection.Ice chest; single front wooden cabinet with two doors and a flap, and three accessories. The top door is a lid with a metal handle at the front and two metal hinges along the back. The front door has two metal hinges on the right-hand side and has a metal lever catch. A hinged flap fits between the front legs at bottom of the ice chest and swings upwards. The front legs have wheels. The insulated top compartment has a metal lining and its floor slopes towards the centre of the back wall. In the floor are a formed oval air-flow hole and the open end of a pipe that has a hood partly covering it. The front compartment is an insulated metal-lined cupboard with a vertical pipe down the centre of the back wall and horizontal rails in the centre of each side wall. The accessories are a rectangular corrugated iron stand, a rectangular wire grid shelf and a round aluminium bowl with a lip and two sides pushed in. The ice chest was made circa 1927 and is part of the W.R. Angus Collection.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, dr roy angus, dr ryan, doctor angus, dr angus, ice chest, ice box, antique, food preservation, refrigeration, domestic equipment, kitchen appliance, refrigerator, non-electric refrigerator, non-mechanical refrigerator, w.r. angus collection -
Wodonga & District Historical Society Inc
Photograph - Wodonga Civic Centre 1971
In the late 1960s the area in Wodonga between Hovell and Havelock Streets was zoned for civic purposes. By 1969 Melbourne architect Bruce Marshall had designed the civic centre which included a library, theatre and senior citizens' rooms. The main hall had a seating capacity of 1,000 people but could be divided by a sliding door. into smaller areas. It also included meeting rooms and kitchen facilities. The Civic Centre was officially opened by the Honorable Sir Henry Bolte, K.C.M.P., M.P., Premier of Victoria who was accompanied by the Honorable R. J. Hamer E.D., Minister for Local Government. The Shire President was Cr. James A. Terrill, J.P.This image records an important stage in the development of local government and civic buildings in Wodonga, Victoria.A black and white image of the Wodonga Civic Centre in a wooden frame.wodonga civic centre, wodonga history, wodonga local government -
Wodonga & District Historical Society Inc
Functional object - Herb Cutter, 1940s
This device was improvised to prepare herbs for cooking, It could chop bundles of herbs efficiently whilst also ensuring the users fingers were kept clear of the blades. The user held onto the handle and rolled the blades across the herbs to be cut. This item has typical of kitchenware improvised to complete tasks when more food preparation was completed in the home.A device with two sets of sharp metal rollers attached to a metal frame with a handle, The wooden handle is painted in green. domestic appliances, kitchen utensils -
Surrey Hills Historical Society Collection
Photograph, 87 Essex Road, c 1930 (demolished), 1930
A check of the electoral rolls points to this being the home of Frederick Harry Percival Lamble, labourer, born in Collingwood. He and his family continued to live at 87 Essex Road until his death in 1968 and his occupation is consistently given as labourer. His wife Bessie Louisa Woods died in 1957.Black and white photo taken from the street of an Edwardian style timber house with 2 chimneys, one of which looks like a kitchen or laundry chimney. The house stands behind a white wooden picket fence in a mature garden which conceals the bull-nose verandah. The house appears to have a slate roof with galvanised capping. To the left can be seen the roofs of houses in Durham Road.timber houses, edwardian style, essex road, lamble family, durham road, bessie ethel lamble, bessie ethel smith -
Mont De Lancey
Domestic object - Mincer, Universal, Unknown
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'2 UNIVERSAL' is stamped on the front of the mincer. Stamped on the front side of the handle - ' L. F&C. NEW BRITAIN. CONN.U.S.A.' On the inside of the cast iron handle is stamped - 'PATENT 12 1897. PAT.MAY 15.1909. 4.18. 1899. D.R.ENG 10'...... and several other numbers which are hard to decipher.domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
Mont De Lancey
Domestic object - Mincer, Beatrice
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.'Beatrice' brand vintage cast iron mincer with a red wooden handle with two attachments. It can be screwed to a table or bench, secured tightly by a two pronged claw. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is slightly shaped near the main body of the mincer.'No. 318' 'Beatrice'meat mincers, domestic objects, kitchen equipment, cooking equipment -
Mont De Lancey
Domestic object - Mincer, Loveload, Unknown
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A small vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a white enamel coated funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'Loveload London 1'domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
Mont De Lancey
Domestic object - Mincer, Husqvarna Scania
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a brown wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'No 3 Scandia'domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
Flagstaff Hill Maritime Museum and Village
Domestic object - Corkscrew, 1930s or after
The design of the corkscrew may have been derived from the gun worm, which was a device from at least the early 1630s, used by men to remove unspent charges from a musket's barrel in a similar fashion. The corkscrew is possibly an English invention, due to the tradition of beer and cider, and the 'Treatise on Cider' by John Worlidge in 1676 describes "binning of tightly corked cider bottles on their sides", although the earliest reference to a corkscrew is, "steel worm used for the drawing of Corks out of Bottles" from 1681. In 1795, the first corkscrew patent was granted to the Reverend Samuel Henshall, in England. The clergyman affixed a simple disk, now known as the Henshall Button, between the worm and the shank. The disk prevents the worm from going too deep into the cork, forces the cork to turn with the turning of the crosspiece, and thus breaks the adhesion between the cork and the neck of the bottle. The disk is designed and manufactured slightly concave on the underside, which compresses the top of the cork and helps keep it from breaking apart. The winged corkscrew, sometimes called a cork extractor, butterfly corkscrew, owl corkscrew, Indian corkscrew, or angel corkscrew, has two levers, one on either side of the worm. As the worm is twisted into the cork, the levers are raised. Pushing down the levers draws the cork from the bottle in one smooth motion. The most common design has a rack and pinion connecting the levers to the body. The head of the central shaft is frequently modified to form a bottle opener, or foil cutter, increasing the utility of the device. Corkscrews of this design are particularly popular in household use. In 1880, William Burton Baker was issued British Patent No. 2950 for his double lever corkscrew, with both levers sliding onto the upper end of the shank. The first American patent was in 1930 granted to the Italian Domenico Rosati who emigrated to Chicago, Illinois, to work as bartender before prohibition. Rosati's design had an exposed rack and pinion mechanism. Such design was adapted by other brands as the wine-market grew in popularity. The winged owl version, with two side-plates covering the rack and pinion mechanism, was first designed and manufactured in 1932 by the Spanish industrial designer David Olañeta for his brand BOJ and was later adopted by others, such as the 1936 US Patent No. 98,968 by Richard Smythe marked HOOTCH-OWL https://en.wikipedia.org/wiki/CorkscrewThis object is significant as an example of an item in common use in the 19th and early 20th centuries, and that was developed further in the 1930s.Winged corkscrew with a T-shaped wooden handle, metal spring and worm-wheel screw section.None.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, corkscrew, beverages, kitchen equipment, bottle opener -
Clunes Museum
Domestic object - LEMON SQUEEZER - DOMESTIC
... JUICER KITCHEN TOOL Nil Wooden hinged with enamel bowl ...Wooden hinged with enamel bowl that has 5 holes in it.Niljuicer, kitchen tool -
Mont De Lancey
Domestic object - Mincer, Universal, Unknown
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved. There are three mincing attachments tied with string.'UNIVERSAL' is stamped on the top of the mincer. Stamped on the front side of the handle - ' L.P. F&C. NEW BRITAIN. CONN.U.S.A.' On the inside of the cast iron handle is stamped - 'PATENT 10.2.1897. PATENT.MAY 15.1900. 4.18. 1890...... and several other numbers which are difficult to decipher.domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
Mont De Lancey
Domestic object - Mincer, Universal, Unknown
A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.British Made National. 25domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers -
Mont De Lancey
Domestic object - Meat Mallet, Unknown
This was used in the family kitchen to tenderise meat 60 - 70 years ago.A long handled wooden vintage meat mallet which has a knob on the end of the handle as well as a thin decorative line near the top. It has a thick mallet shape at the bottom to tenderise meat.domestic objects, meat mallet, meat tenderiser, kitchenware -
Bendigo Historical Society Inc.
Tool - COFFEE GRINDER
Black cast iron coffee grinder with pull out drawer for catching ground coffee, gold coloured funnel on top for beans and a handle with wooden knob for turning grinder, brass screw & name plate on front, square base with holes for securing, hand made lid possibly cut from motor oil can.T & C Clark & Co Ltd Wolver Hampton Druertons improved Clark & Co Manufacturersdomestic equipment, food preparation, kitchen, k182 -
Bendigo Historical Society Inc.
Photograph - T C WATTS & SON COLLECTION: THISTLE STREET, BENDIGO, 1931
Black and white photographs (2) mounted on rectangular brown board. House, California-type bungalow wood and rough cast construction, 2 gables, bow window on right. Large square return verandah with brick and concrete balustrade. 2 double and 1 single window on side plus 1 chimney ( kitchen ) Name of house 'Frostville' centre beam of porch. Wooden slat front fence. On back of photo: A. McIntosh, Thistle Street, £1000 sewered or £950 plus sewer, 15.10.31' 2012 photo of house attached to record.Frank A. Jeffree Photo Bendigo [In Brown]bendigo, business, t c watts and son, s -
Bendigo Historical Society Inc.
Tool - APPLE CORER & PEELER
Hand operated metal apple coere & peeler with screw attachment for mounting on bench or table, black wooden handle.Little Star Patented June.9.85domestic equipment, food preparation, kitchen, k205