This anaesthetic mask has a screw missing from the right hand side. Made of stainless steel with light tarnish. mask, surgery, anaesthesia

This item was designed by surgeon Paul Herman Martin Sudeck to administer ether and then chloroform anaesthesia. Paul Hermann Martin Sudeck was a German surgeon (28 December 1866 - 28 September 1945). He first described his inhaler in a 1903 article, "Eine neue Aethermaske" (A New Ether Mask).The metal cone shaped mask has moulded features on the proximal end to fit over the patient's mouth. The distal end is rounded and has an area for the absorbent material (in this item, a sponge) through which the anaestheric ether or chloroform was dripped. The side 'arms' would have been used to attach a strap.inhaler, mask, cone, paul herman martin sudeck, germany, ether, chloroform, sponge, 1900

This is a recent example of a Laryngeal Mask Airway (LMA). The LMA was invented in 1983 by British anaesthetist, Archie Brain. The LMA revolutionised anaesthetic practice and by 1995 had been used in excess of 100 million patients and was available in more than 80 countries throughout the world. Green transparent plastic tube connected to a laryngeal maskPrinted in black ink on green plastic tubing: Ambularyngeal mask, brain, archie, airway, ambu

The Schimmelbusch mask is an open breathing system for delivering an anesthetic. The device was invented by Curt Schimmelbusch in 1889, and was used until the 1950s (though it is still applied in some developing countries). The device consists of a wire frame which is covered with several beds of gauze and applied to the patient's face over the mouth and nose. Then high-volatility anesthetic (usually diethyl ether or halothane, and historically chloroform) is dripped on it, allowing the patient to inhale a mix of the evaporated anesthetic and air. The device is designed to prevent the anesthetic from coming in contact with the patient's skin, where it can cause irritation.This model differs from the others in that the mask's handle is attached to the mask, as opposed to the spring. The chloroform cloth was possibly held in place by the clamp, instead of a spring. Schimmelbusch anasthetic mask, made of Stainless steel. This mask was used with chloroform cloth. Missing spring. Martin and Co.surgery, anesthetic, chloroform, surgical instrument

Used at Foster Valley Mills for storing gas masks, probably during WWII.Masonite case with metal frame and leather carrying handle has three internal compartments used for storing gas masks.textile mills - staff world war ii textile mills, valley worsted mill foster valley mill pty ltd, textile mills - staff, world war ii, textile mills

In the early days of the establishing the new secondary campus many of the school signs were handmade, often by staff member Frank Scambler, but also by dedicated parents and friends of the school. This sign is representative of the 'handmade' nature of school signage during the early establishment of the Westbourne Truganina campus.Glass panel with the front painted with blue background and "WESTBOURNE" hand painted in yellow. A thin gold film has been adhered to the top and bottom edges. The reverse is spray painted in yellow and blue and a piece of masking tape containing inscriptions is adhered to the middle.On the masking tape on the reverse, "AZURE/ BLUE/ 2 OFF.

The WWII US civilian gas mask for children was issued in a cardboard box. It came with a canvas carrying bag which had a shoulder strap sewn to the sides. This US Civilian home front item was issued during World War two. Gas masks were distributed among the general population because of the fear of Japan, and even Germany, being able to reach the main landCardboard box containing child size rubber and metal gas mask with green canvass bagModel MIA2-1-1non-combatant child's gas mask, ww2

This small, neat, domette covered mask was widely used throughout Australia for the administration of chloroform anaesthesia.Triangular shaped mask with hinged arm at point of triangle that connects to upper frame section via a hook. Used for the administration of chloroform.chloroform, facemask, foldable, anaesthesia, anesthesia

The item goes with 1321 Photo Print Box owned by Jack Grinton No 1043, 38th Batt AIF. Part of the Grinton collection which included hundreds of negatives and developed photos that he took during the Great War. Refer cat No 1280 for service details. Refer also 1317P, 1320P.Brown paper envelope containing black paper printing masks for B&W negatives. The holes are in various rectangular, circular and oval shapes.Envelopes in marked "Kodak Printing Masks. Size 2 Br. (2 1/4"x3 1/4") 9d per pkt."photography, print, accessory, grinton

Mask used by troops to prevent inhaling noxious gasses during attacks. carried in bag over shoulder and filtted when neededAs manufactured and distributed by General Motors Holden for military and civilian use.Canvas bag divided into five sections containing a rubber mask with head straps and flexible hose off mouth piece, bag fitted with shoulder strapV11 GMH & CO 1942gas mask, military

Sir Frederick William Hewitt was a great advocate of nitrous oxide anaesthesia, mainly for short procedures. In 1885, he reviewed the methods of administration and concluded that accurately fitting valves were essential at the commencement of the inhalation, in order to ensure the rapid washout of air from the lungs; and there was a distinct advantage in allowing some rebreathing of nitrous oxide towards the end of inhalation. He thus devised the stopcock. The stopcock consists of a cylinder with two rotating sleeves and two rubber flap valves. The arrangement allows air to be breathed either through the valves or rebreathed to and from the bag; nitrous oxide to be breathed either through the valves from the bag and out to the atmosphere or rebreathed to and from the bag. Soon after the introduction of this stopcock, there was an increased interest in administering oxygen in combination with nitrous oxide.Amber coloured ether inhaler, with leather mask, celluloid shield and inflatable cushion with attached Hewitt's stopcock.hewitt, stopcock, celluloid, ether, inhaler, mask, rebreathing

Item relates to W.F.R Budge VX48105, refer Cat No 2721 for his service details..1) Carry Bag, kahki canvas, pockets & metal carry clips. .2) Respirator, red, metal, breathing hose & face mask attached, black elastic strapping attached to back of face mask. .3) Tin container, green, eyepiece cleaner, small box respirator & mask.“Carry bag: [up arrow] Romac” ,Inside top: “1941”, Back in biro: “VX 48105 MAJ J BUDGE”. Respirator: “No 4A Willow 1939”, Top embossed: “HL - 10 12 40 - 1 57”, Bottom embossed: “WKL6 - EIV” Face Mask: “L22 [up arrow] 22.10.40”, On air outlet etched: “SD - 1940”.military equipment - army, passchendaele barracks trust

This item appears to be a World War One gas mask of the type known as the British small box respirator. Gas masks were produced and issued to members of the Allied defence forces in World War One in response to the German Army use of poison gas. The small box respirator was first issued in April 1916. This gas mask is of interest as a memento of World War One.This is a gas mask with a canvas hood for covering the face and with transparent mica eyepieces and cloth straps that fit around the head. A round perforated metal piece is attached to the bottom of the head piece and a hose is attached to the head piece and to an oval-shaped tin can. 757213 5613 (?) 18 world war one, history of warrnambool, gas mask

Wire framed face mask with a hinged outer layer which can be opened to insert gauze or flannel on which to administer ether. The domed portion is attached by inserting wire edges into slots in the rim, which ends in a handle with a loop at the end.mask, ether, anaesthesia, open method

The Porton resuscitator was devised in 1951 at the British Chemical Defence Experimental Establishment in Porton, Sailsbury, as a bellows-valve-mask resuscitator. Extensive testing was undertaken over eight years, with the device being successfully used for air transport of polio patients, for emergency resuscitation in hospital wards, and by hospital orderlies.Black rubber mask attached to a black concentina bag with a round metal filter at the end. Sits in its original wooden box with perspex lid. Instructions of use displayed on each side of the box. [white print on black rubber concertina bellows] PR 504 / P.B.C. 22 / - SEPT 1962resuscitator, porton

This Anaesthetic Mask 'Schimmelbusch' mask was used to deliver chloroform or ether as an anaesthetic. When this mask was in use most doctors would have delivered the anaesthetic themselves. During the 1940s and 1950s, some nurses may have played an active role in the delivery of anaesthetics, particularly in remote areas and during wartime or doctor shortages. This medical / hospital equipment was the latest available in the 1950s when the Tawonga District General Hospital was built specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Metal egg shaped frame with metal pieces crossing longitudinally and across with attached moveable metal piece that holds cloth in when closed and fits into open hollow egg shaped frame. At one end is a flat metal piece that would rest on the forehead. Usually used for children. To add cloth (gauze or muslin) with anaesthetic (chloroform or ether) open the mask and place the cloth onto the frame. It clipped on and the fluid then dripped onto the cloth. CHIRON GERMANY between handle and oval.hospital; tawonga; mt beauty; medical; nurse; medical instrument; face; anaesthetic.

Example of WWI German soldiers - part of the Honeybun Collection.Example of WWI German soldiers' kitGerman soldiers WWI gas mask container. See NA5224 for mask.Nilexample of wwi german soldiers kit

This is a large metal framework covered in gauze, the whole mask completely enclosing the patient's face excluding any possibility of carbon dioxide being excreted. This object was found in the possession of the Italian Army in Libya in 1940, and donated to the museum by Dr Geoffrey Kaye. Gustave Julliard, of Geneva, after a death from chloroform had occurred in his practice, abandoned the use of that anaesthetic and adopted ether. He administered it from a large, wire frame, the outside of which was covered with waxed cloth to make it impermeable to air, the inside with surgical gauze on to which the ether was poured. Large metal wire frame mask, covered in waxed paper, with gauze wrapped around the rim to prevent ether leaking out, effectively forming a rebreathing apparatus.ether, carbon dioxide, italian army, libya, 1940

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus

Metal mask

Metal Mask

Item bought home by Frederick Arthur William Hutson No 3539 AIF. Refer 922 for his service history. .1) WW1 era gas mask consisting of face mask, metal breathing apparatus, strapping. .2) Metal container with lid to hold gas mask.military-equipment, protective, containers, gas

Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Small gas mask with black circular canister attached to rubber face covering. Single oval eye piece made from clear plastic like material. A rubber band secures the face covering to the canister.Printed on rubber face covering: L&B.R.Co (G) Oct 1937 Printed on band securing face covering to canister: POPPE LOT 3.11.39 7231gas, masks, military

Mask oxygen Hequipment, 1965, raf

WWII historical significanceWWII gas maskNo. L3 W.H. & Co. 1944. ANSELL 5/43