Object. Metal medal in the shape of a cross pattee with triangular arms almost filling the square, with a suspension bar. Centre Section: Profile picture of Queen Victoria. Top Arm: ''Crowned 1838'' Left Arm: ''Born 1819'' Right arm: ''Married 1840'' Bottom Arm: ''Jubilee 1887'' Regd No. 52773.numismatics, medals - commemorative, queen victoria jubilee medal 1887

Object: blue metal mining box. 'New Don' printed on front of box in white paint. Box contains documents relating to New Don mine. Tag affixed to front of box, (formerly ) box number 475.mining, parish map, new don, mining, bendigo, gold, gold mining, mccoll, rankin & stanistreet, new don

Object : metal mining box formerly number 487, now Central Deborah Gold Mine Box 2 (label on front has number 487 written in pencil ) Box made of metal and painted blue, with Monument Hill Consolidated written in white paint on front of door. Affixed across this writing is a handwritten sign which says 'Central Deborah' Box contains accounts, correspondence etc.mine, gold, central deborah gold mine, mccoll, rankin & stanistreet: central deborah gold mine nl, gold mining, accounts

Two part object (1) Metal ball cleaner. Consists of metal upper and lower circular sections, lined with strong bristle. Top has a handle for turning, and fits into a spingdle in the base. Upper section inscription states: 'PATENTAPPLIED FOR'. (2) Small piece detached from part 1. Materials: Wood, Natural fibre, Metal, Paint, Rubbertennis

Ammunition shell was used in a 40 lb Armstrong Rifled Breach Loading (RBL) Gun. It does not contain explosives because the projectile and explosive were separate items. The Armstrong 40 lb BL Gun There were 4 x 40lb Armstrong (RBL) Guns issued to the Ham and Beef Battery at Hastings Victoria. After the Hastings Battery field artillery disbanded, the 4 Guns were transferred from the Hastings Battery to the Warrnambool Battery field artillery in 1904. (There is a photograph of one of these guns on its carriage, pictured in front of the Orderly room (Drill Hall) at Warrnambool, which is now the Library of South West TAFE). The 40lb Armstrong Guns were recalled back to Melbourne when the government issued the updated 4.7inch QF (Quick Firing) Naval Guns, mounted on carriages, to the Warrnambool Garrison Artillery 1907. The Hastings Museum today holds one of the original 40lb Armstrong RBL guns that were at first at Hastings and then Warrnambool, evidenced by tracing the numbers on that gun. This gun has now been restored. Surviving 40 lb Armstrong BL Guns in Australia The Hastings Museum has restored one of the Guns that was at Hastings and then from 1904-1907 in Warrnambool. This Gun is now on display at the Hastings Museum.This ammunition shell from a 40lb Armstrong RBL gun is very significant because of its association with the Warrnambool Battery Field Artillery in the early 1904-1907. It is known that the original 40lb Armstrong RBL gun used in Warrnambool is now restored and on display at the Hastings Museum.Ammunition shell from a 40Ib Armstrong Rifled Breach loading (RBL) Gun. Metal bullet-shaped object, flat base, tapering to cone-shaped tip. Parallel equidistant ridges run from outer edge of base to position where cone shape begins. Tip has a square-shaped hole in the centre and has a very uneven surface. Base has corrosion and metal is flaking away. Does not contain explosives. Remnants of white paint-like substance in several places. From the Hastings, Victoria, area. Late 19th - early 20th century.flagstaff hill maritime museum and village, great ocean road, shipwreck coast, ammunition shell, 40 lb, war equipment, hasting battery field, defence of warrnambool

Ammunition shell was used in a 40 lb Armstrong Rifled Breach Loading (RBL) Gun. The shell was fired into Westernport Bay by the Hastings Battery Field Artillery in late 1800’s or early 1900’s. It was recovered by divers in recent times. It does not contain explosives because the projectile and explosive were separate items. The Armstrong 40 lb BL Gun There were 4 x 40lb Armstrong (RBL) Guns issued to the Ham and Beef Battery at Hastings Victoria. After the Hastings Battery field artillery disbanded, the 4 Guns were transferred from the Hastings Battery to the Warrnambool Battery field artillery in 1904. (There is a photograph of one of these guns on its carriage, pictured in front of the Orderly room (Drill Hall) at Warrnambool, which is now the Library of South West TAFE). The 40lb Armstrong Guns were recalled back to Melbourne when the government issued the updated 4.7inch QF (Quick Firing) Naval Guns, mounted on carriages, to the Warrnambool Garrison Artillery 1907. The Hastings Museum today holds one of the original 40lb Armstrong RBL guns that were at first at Hastings and then Warrnambool, evidenced by tracing the numbers on that gun. This gun has now been restored. Surviving 40 lb Armstrong BL Guns in Australia The Hastings Museum has restored one of the Guns that was at Hastings and then from 1904-1907 in Warrnambool. This Gun is now on display at the Hastings Museum. This ammunition shell from a 40lb Armstrong RBL gun is very significant because of its association with the Warrnambool Battery Field Artillery in the early 1904-1907. It is known that the original 40lb Armstrong RBL gun used in Warrnambool is now restored and on display at the Hastings Museum. Ammunition shell from a 40Ib Armstrong Rifled Breach loading (RBL) Gun. Metal bullet-shaped object, flat base, tapering to cone-shaped tip. Parallel equidistant ridges run from outer edge of base to position where cone shape begins. Tip has a square-shaped hole in the centre and has a very uneven surface. Base has corrosion and metal is flaking away. Does not contain explosives. Remnants of white paint-like substance in several places. From the Hastings, Victoria, area. Late 19th - early 20th century.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ammunition shell, 40 lb armstrong rbl gun, volunteer corps, war equipment, defence forces, warrnambool bettery field artillery, hastings battery field artillery, defence of warrnambool

Object. Dark metal hat badge, 38th Battalion Coat of Arms with a shield in the centre flanked by two rearing horses, topped by a crown. Banner above reads, ''BENDIGO REGIMENT''. Banner below, ''HONOREM CUSTODITE'' two pin loops on the back. This badge was issued between 1927 and 1936. It relates to the 38th Battalion (The Bendigo Regiment). The 38th Battalion was disbanded in April 1919, but reformed in several ways between then and 1936, when it was reraised as a separate unit.numismatics, badges - military, hat badge 38th battalion ( bendigo reg.)

Representation of the RACOG coat of arms carved out of wood. Arms features a shield with four stars at centre, held by a platypus on left and a kangaroo on right. The shield is surmounted by a helmet and crown, with a phoenix bearing a rod of Asclepius at the very top. Arms are standing on a bed of wattle, above a scroll which is engraved with the text 'AD UMBRIS AD LUMINA VITAE'. The back of the coat of arms is carved with the text 'MOUSLEY - '88'. Metal plaque detached from object reads 'PRESENTED BY/FELLOWS & MEMBERS/FROM TASMANIA'.'MOUSLEY - '88'

manicure set in black vinyl case, oval shaped with clasp on front. Satin purple lining on inside lid, velour lining on base. Nail buffer with elliptical casine top and handle, suede buffing material with silver retaining band. Thin nail file in vinyl case. Pink nail polish crayon in steel case. Casine handled metal nail file. Metal cuticle stick. All objects secured in case by straps or cavities. One object missing (probably clippers or scissors).Makers symbol imprinted on file and cuticle stick. 'Nagel-Polier-Stift', 'Polideur', 'Ges.Gesch.', 'Verleiht den Fingernagein eleganten Hochglanz' all printed on nail polish label.toilet requisites, manicure, nail, set, casine, file, polish, buffer, toiletries

A hammer is a tool with a heavy head and a handle, often made of shock-absorbent wood or fiberglass that is used to strike an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers vary in shape, size, and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head most often made of steel and a handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and a handle, fastened together by means of a special wedge made for the purpose, or by glue, or both. This two-piece design is often used, to combine a dense metallic striking head with a non-metallic mechanical-shock-absorbing handle -to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often hickory or ash, which are tough and long-lasting materials that can dissipate shock waves from the hammer head. A well used hammer with wooden handle and steel headpioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, tools, craftsman, carpenters, blacksmiths, builders, woodwork,

A hammer is a tool with a heavy head and a handle, often made of shock absorbent wood or fibreglass, that is used to strike an object. The most common use for hammers are to drive nails, fit parts, forge metal and break apart objects. Hammers vary in size, shape and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head, most often made of steel and handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and handle, fastened together by means of a special wedge made for the purpose, or by glue, or by both . This 2 piece design is often used to combine a dense metallic striking head with a non-metallic mechanical shock absorbing handle - to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often ash or hickory, which are tough and long lasting materials that can dissipate shock waves from the hammer head. This upholsterer’s hammer has one end of the steel head rounded for knocking nails into wood furniture. The other end is divided to form a 2 pronged claw for withdrawing nails. . An upholsterer's hammer with a steel head and wooden handle, The steel head has one rounded end and a clawed endpioneers, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, brighton, tools, craftsman, carpenters, cabinet makers, blacksmiths, builders, woodwork

Belaying Pin: A belaying pin is a solid metal or wooden object used on traditionally rigged sailing vessels to secure lines of running sale rigging. Largely replaced on most modern vessels by cleats, but are still used, particularly on square-rigged ships. A belaying pin is composed of a round handle and cylindrical shaft. The shaft is inserted into a hole in various strategically located wooden pin rails that line the extension of a ship's side above the level of the deck and the surrounding the base of masts, or free-standing, called (fife rails) up to the base of the pins handle. A line is then led under and behind the base of the pin then round the top in a figure-8 pattern for at least four turns. The excess line is coiled and stored neatly by taking a bight from the upper part of the final strand, looping it over and round beneath the coil, then twisting it once or more before slipping the twisted end over the top of the belaying pin to secure the coil in place. The subject item seems to have been hand made possibly by a crew member to while away his time at sea given the item is hand carved and rather personalised in appearance. History of the Loch Ard: The Loch Ard got its name from ”Loch Ard” a loch which lies to the west of Aberfoyle, and the east of Loch Lomond. It means "high lake" in Scottish Gaelic. The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curdle and Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Loch Ard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Loch Ard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Loch Ard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Loch Ard Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition in. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we are able to interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The collections historically significance is that it is associated unfortunately with the worst and best-known shipwreck in Victoria's history. Wooden belaying pin with leaf design on the handle (hand made).Has the words Loch Ard faintly inscribed on handle (Artifact Rego No LA/32)flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, wooden belaying pin

These hair tongs were used to curl or wave hair. They have the name’ Marcel’ on them. In 1872 Francois Marcel Grateau invented a hairstyle called the ‘Marcel Wave’ where women’s hair styles had mostly deep waves rather than curls. The tongs that were held manually and heated and used at home to produce deep waves or curls become a commonplace item in a woman’s home in the late 19th and early 20th centuries. By the 1930s electric hair tongs were introduced but the non-electric ones continued to be used until the 1950s. These hair tongs belonged to a woman from England and would have been used in the 1930s or 40s. They are a good example of the type of household article used by women 70 or 80 years ago and will be useful for display.This is a scissors-like article with wooden handles and metal blades for waving or curling hair. One blade is heavily curved and the other is a solid round shape. The ends of the blades are tapered. The blades were heated over a stove and used manually to enclose part of a woman’s hair to produce waves or curls. The handles were originally polished black and are somewhat rubbed and the blades and other metal parts are a little rusty. ‘Marcel’ ‘12’ hair curling tongs, warrnambool

A slide rule is an instrument which is used to carry out mathematical calculations. William Oughtred is credited with its invention in 1621, however many others including Isaac Newton have made improvements or modifications over the years. From 1625 to 1800 there were approximately 40 different styles brought forward. with the following 100 years sees over 250 designs created.There have been different versions and modifications to suit scientific, mathematical and engineering requirements. It is interesting to note that many of the buildings of the 19th and 20th centuries have been designed with the use of slide rules. Their use has declined in the last 25-30 years with the advent of computers and specialist calculators.While not directly linked in any way to the history of Warrnambool, this slide rule would have been a item in use by students doing maths at upper secondary level as well as other applications which would make it a familiar object to many people.Coated bamboo with sliding metal framed glass panel or cursor . The bamboo is in three sections with the middle section movable. It is marked in various graduated measurements mainly in dark blue but with some in green and red.It is inside a dark grey rectangular box with a slide off lid on one end.There is a celluloid panel on the back with a conversion table printed on it. There is an accompanying 67 page manual with a pale green cover with black text. On slide rule:Sun Hemmi Japan No 2664S On box: Sun Hemmi Japan No 2664S warrnambool, hemmi slide rule, bamboo slide rule

This object was used a shield to slide brass button through to enable them to be polished.They were a common object for those who wore military type uniforms with metal buttons The item belonged to John T Sizeland who was a member of the Warrnambool Urban Fire Brigade from 1940 through to 1977.This is an object which was commonly used by those in the military and those who wore uniforms with brass buttons. This item has strong provenance having belonged to John Sizeland who was a member of the Warrnambool Fire Brigade for over 30 years and was donated along with a number of associated fire brigade items. Long horse shoeshaped piece of copper with narrow slice three quarters through with rounded notch at the end.J Sizeland hammered into one end.warrnambool, button cleaner/protector, button cleaning shield, brass button, john t sizeland, brass button cleaning

These drawings have been produced in 1919 by Ron Uebergang when he was a pupil at the Warrnambool Technical School. The Uebergang families were pioneers in the Warrnambool/Allansford area. Ronald Uebergang (1903-1971) was born in Warrnambool to Ernest Uebergang and Mary Watson. He went to Allansford State School and Warrnambool Technical School and married Myra Hall. He was mechanically-minded, a good photographer and fond of music and dancing. He and Myra had a dairy farm at the family property, Hopkins Hill near Allansford and later took up grazing beef cattle. Warrnambool Technical School was established in 1913, and was located first on a Timor Street site and later moved to Caramut Road. Today it is called Brauer College. These drawings are of considerable interest because they were produced by Ron Uebergang and the Uebergang families have been prominent in the history of the Warrnambool and Allansford areas since the 1850s. They are also of interest as examples of the type of work produced by students of Warrnambool Technical School in its early days. .1 A Blueprint for a Feed Pump for a Horizontal Engine - blue background, white drawings. The drawing is two-thirds of the full size object. .2 The same drawing on white see-through paper. The paper has a thick line drawn around the edges in black ink. .3 The same drawing on plain white card with drawings in black ink and a thick line drawn around the edges in black ink. .4 The original brown paper covering used to send the drawings to Warrnambool Technical School in 1921. There are also two pages of handwritten material attached to the drawings by a metal clip and giving a description of the design of the Feed Pump. ‘Warrnambool Technical School’ ‘Designed by R. Uebergang’ ‘Drawn by R. Uebergang’ ‘Date 7/10/19’ ronald uebergang, warrnambool technical school, history of allansford, history of warrnambool

This medal was issued to commemorate the end of World War 2 and was issued to eligible living veterans or their widows/widowers.It comes in a black card and fabric lined box. It has been issued by the Department of Veterans Affairs.This medal was awarded to Ernest Henry Swan. He served from December 1941 to July 1942 in the Citizen Military Forces and from July 1942 to September 1944 in the Australian Imperial Forces. His reason for discharge was reserved occupation. He held the rank of corporal in 26th Motor regiment. He was born in Colac 19/11/1919 to Ernest Swan and Daisy Johnson. He died 04/08/2009 and is buried at the Warrnambool cemetery. During his life he farmed a soldiers’ settlers block in the Grasmere area, north of Warrnambool. A common object with over 300000 minted but with a link to a local person and commemorating an event of world importance.Gold metal round medal with Australian coat of Arms on one side and stylised image of outline of Australia on the obverse side. Mounted in black card box.World War 11 Service to Australia. World War 11 60years 1945-2005warrnambool, ernest swan, 60th anniversary medallion ww2

This wallet was given to George Langley from the Warrnambool High School ex students in 1940. George Furner Langley 1891-1971 was Principal of Warrnambool High School from 1921 to 1940.He served with distinction in World War One and World War Two and later became the Principal of Melbourne High School. This wallet is of some interest as a memento of a prominent Principal of Warrnambool High School - Colonel George Langley. This is a brown kangaroo leather folding wallet with several pockets, a pencil holder, a metal clip on the front and a small metal plaque with an inscription. It is lined with corded material. G.F. Langley in Appreciation 18-5-40 Warrnambool High School Ex Students Stg 115 george langley, warrnambool high school

This is a vintage item from the early 20th century. It could have been used in a house hold context or by farmers in the paddocks, by hikers, family picnickers, campers or by workers in factories. This item has no known provenance and is kept as an interesting vintage domestic object..Deep blue enamel vacuum flask or thermos with a rusted metal handle and a lid which serves as a cup. There are rust patches on the base, sides and cup. The central section is round.vintage domestic item, vintage vacuum flask, vintage thermos

This is a vintage item dating from the early 20th century. It is a hand-held lantern that could also have been hung from a ledge or wall. Lanterns of this type were often used by railway employees or ship's crew for signalling. The lighting was probably obtained by a candle as there is no evidence of an oil mechanism.This item is of interest because of its age and its possible use locally over a hundred years ago.This is a metal lantern painted black on the outside and silver-frosted inside. It has a rectangular-shaped body with bevelled glass, a semi-circular metal top and a metal handle. The hinged glass door on the side is missing.vintage lighting, hand-held metal lanterns

This lamp base would have had a glass chimney clipped to the burner. It is a portable kerosene lamp used in the 19th century and the early 20th century for household lighting before the advent of electricity.This item is retained for display purposes as an example of household lighting a hundred years ago.This is a clear glass lamp base with a metal burner attached to the top. The bottom of the base is hollow. The glass on the stem and bulb is patterned. A BLIXTENvintage household lighting, kerosene lamps

An item of this type would have been used for lighting purposes by householders both within and around the house in the 19th and early 20th centuries. It may have originally been attached to a wall or ledge. This item has no known local provenance but is retained as an example of a lighting mechanism some 100 years ago.This is the main body of a kerosene lamp. It is made of metal and the base and back stand have been painted green. It has a mantle, an oil container and a round reflector plate (which has been originally painted silver). The glass bulb is missing.N (?) 23 Victorvintage lighting, kerosene lamps

This lamp was produced in 1922 as a lighting mechanism for a motor cycle. It is a Lucas lamp, with the trade name 'Chieftain'. The firm of Joseph Lucas Industries was established in 1860 in England, initially making scoops, buckets and plant holders. In 1875 it began making lamps for ships and after 1902 lamps and other components for motorised vehicles. Today, after merging with a North American company, it is a maker of components for both the automotive and the aerospace industries. This item is retained as an example of motor cycle lighting that would have been used locally in the 1920s.This is a metal lamp with a round base, a cylindrical body and a rounded lighting mechanism enclosed in glass. There is a screw lid on top of the oil container, a mechanism for attaching the lamp to the vehicle and two small round glass buttons on either side of the lighting area. The lamp has traces of silver colouring but is very rusty. There is an old card containing some handwriting attached to the lamp.Lucas Chieftain 1922motor cycle lamps, joseph lucas ltd, vintage vehicle parts

This lantern would have been attached to a horse-drawn coach for lighting purposes and local coaches and other large-size horse-drawn vehicles would have had similar lights. It is a heavy object and may also have been used on early model automobiles or other motorised vehicles.This item has no known local provenance and is retained for display and research purposes.This is cylindrical metal lantern painted black. It has a glass covering on the rounded face and glass inserts on the back and the side. It has a metal-covered candle that is inserted into the lantern through an opening at the base. There are hinged clips to open the main glass and the back glass.vintage coach lighting, candle-lit lanterns

This miniature cash tin was produced by Fry's Chocolate Company of England as a promotional giveaway and probably held some chocolate samples. It would then have been used in a household for keeping trinkets or other small items. The Fry's Chocolate Company was established in Bristol, England in the mid 18th century by Joseph Fry and in the mid 19th century it produced the first mass-produced chocolate bar (1866 - Chocolate Cream, 1913 Turkish Delight). The company merged with the Cadbury company in 1919 and the Tasmanian Cadbury factory which opened in 1921 was known as Cadbury-Fry-Pascall. Fry's chocolate bars were very popular in Australia. This item is retained as a memento of Fry's Chocolate Company, the products of which featured in Australian life for many decades. This is a rectangular metal tin painted black and light brown. It has a hinged lid and a metal handle held with clips inserted into slits on the top of the lid. There is printing on the lid and a label on the base.Cash Fry's Chocolatechocolate bars, fry's chocolate, miniature cash tin

This lamp would have been attached to a coach, or even an early automobile, for lighting purposes. It could also have been used for outdoor purposes in a household or business setting. Lamps such as this were used in the 19th century and early 20th century and preceded or accompanied the use of oil lamps and were later superseded by electric and gas lighting.This item is of historical interest and is retained for display purposes.This is a rectangular-shaped lamp made of metal. It is painted black and has clear glass with bevelled edges on two sides and a small round red-coloured glass on another side. The lighting mechanism inside the glass appears to have held a candle. The body of the lamp is mounted on a solid round metal pipe. There is a metal handle at the top for attaching the lamp to a wall or stand.vintage lighting, coach lamps

These two items have been linked together as a decorative pair but it is not clear why, as the sphere or bulb does not have an opening and cannot hold a light and there is nothing very attractive about the two items as they appear today. The stand may have been set in front of a coloured light to ensure reflection or the sphere may have been decorated in some way.These items are kept as ornamental curiosities.This is a clear glass sphere on a metal stand. The stand is painted light brown and has a fretwork decorative base, a moulded stem and an open top with a curved pattern edge.vintage ornaments, glass ornaments

This hand-held signalling lamp could have had a number of uses. It could have been used by groups such as the Boy Scouts or most likely was used by local air raid wardens and other military personnel in World War Two. Its large face and the reflecting mechanism would have made it useful over a long distance.This lamp is of historical interest and is retained for display and research purposes.This is a cylindrical metal lamp with a clear glass front attached to the lantern by metal screws. The lantern has been painted black. There is an electric bulb behind the glass and a reflector disc behind the bulb. A handle, attached to the metal body, has two strands of electrical wiring at its end. The handle includes a finger clip, which, when pressed, produces a signal inside the glass area.signalling lamp, world war two military equipment

This is a vintage lighting mechanism probably dating from the 1920s. It would have been used in a household or business to provide lighting for a room. It is quite heavy so would have mostly rested on a table or ledge. It is a Petromax lantern, a brand name for a type of pressurised paraffin lamp that uses a mantle. The Petromax lantern was developed in 1910 by Max Graetz of the firm of Ehrich and Graetz of Berlin, Germany (petro= petroleum, max=Max Graetz).The Petromax lantern is still produced todayThis lantern is of antiquarian interest as an example of household lighting100 years ago.This is a lantern with a metal base, a wooden stem painted black, a metal body holding a piece of circular glass and a metal top with perforations acting as a chimney. The base has a hand pump and a removable screw cap to enable the base to be filled with paraffin. The main body has a screw holder to control the lighting and a pre-lighting mechanism and a mantle fitting inside the glass. The mantle is missing.PETROMAX No. 886 MADE IN GERMANYvintage lighting, petromax lanterns