A coolamon is an Indigenous Australian carrying vessel. It is a multi-purpose shallow vessel, or dish with curved sides, ranging in length from 30–70 cm, and similar in shape to a canoe. Coolamons or pitchis were traditionally used by Aboriginal women to carry water, fruits, nuts, as well as to cradle babies. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This container is an example of an implement used by the early Indigenous people of Eastern Australia.A large shallow elongated hand-made wooden receptacle used by Australian aborigines as a container for food and drink or for carrying babies.pitchi coolamon aboriginal container

A coolamon or pichi is an Indigenous Australian carrying vessel. It is a multi-purpose shallow vessel, or dish with curved sides, ranging in length from 30–70 cm, and similar in shape to a canoe. Coolamons or pichis were traditionally used by Aboriginal women to carry water, fruits, nuts, as well as to cradle babies. A shallow hand-made wooden dish used for carrying food, water and sometimes small babies. It is decorated on outside with burnt incisions.pitchi coolamon aboriginal container

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers.Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has at either end, some letters cast into the section that was used to secure the bell into position. Unable to be deciphered.trams, tramways, conductors, bells, mmtb

Gives the design details of the device or fitting known as a trolley wire ears that holds a tramway copper trolley wire in position. Notes that the drawing was traced in 1924 from a MMTB drawing. Has details for a splicing ear, straight line ear. feeder ear and curve ear along with details for nuts and screws.Yields information about the design of four different types of trolley wire fittings and how they were fabricated for use on the two tram lines, or electric street railways operated by the Victorian Railways.Dyeline print of Victorian Railways drawing number 4057 - Ears for Tramway Overhead ConstructionHas number "7513 D.33" in black pen in bottom right hand corner.tramways, trams, overhead, victorian railways, trolley wire, engineering, electrical engineering

8431.1 - A metal hook which has one end curved around a moderately large single metal chain link, which is itself secured by an encircling metal band to a metal strip, at either end of which by means of holes long metal bolts with screw-threaded tips, screwed onto which are square metal nuts, protrude.

This Dollond Day or Nigh telescope was designed to be used in any light conditions, as its name implies. Telescopes are optical instruments designed to make objects appear to be larger or closer. The discovery of the first telescope in 1608 can be attributed to Hans Lippershey of the Netherlands when he discovers that holding two lenses up some distance apart bring objects closer. He applies for a patent on his invention and this becomes the first documented creation of a telescope. Then in 1668, Newton produces the first successful reflecting telescope using a two-inch diameter concave spherical mirror. This opened the door to magnifying objects millions of times far beyond what could ever be obtained with a lens. It wasn’t until 1729 that Chester Moor Hall develops an achromatic lens (two pieces of glass with different indices of light refraction combined produce a lens that can focus colours to almost an exact point resulting in much sharper images but still with some distortion around the edges of the image. Then in 1729 Scottish instrument maker James Short invents the first parabolic and elliptic, distortion-less mirror ideal for reflecting telescopes. We now come to John Dollond who improves upon the achromatic objective lens by placing a concave flint glass lens between two convex crown glass lenses. This had the effect of improving the image considerably. Makers Information: John Dollond (1707-1761) London England he was a maker of optical and astronomical instruments who developed an achromatic (non-colour distorting) refracting telescope and practical heliometer. A telescope that used a divided lens to measure the Sun’s diameter and the angles between celestial bodies. The son of a Huguenot refugees Dollond learned the family trade of silk weaving. He became proficient in optics and astronomy and in 1752 his eldest son, Peter joined his father in an optical business, in 1753 he introduced the heliometer. In the same year, he also took out a patent on his new lenses. He was elected a fellow of the Royal Society in May 1761 but died suddenly in November and his share in the patent passed to his son Peter. In subsequent squabbles between Peter and the many London opticians who challenged his patent, Peter’s consistent position was that, whatever precedents there may have been to his achromatic lenses, his father had independently reached his practical technique on the basis of his theoretical command of Newtonian optics. As a result of maintaining his fathers patent, Dollond s became the leading manufacturer of optical instruments. For a time in the eighteenth and nineteenth century the word 'Dollond' was almost a generic term for telescope rather like 'Hoover; is to vacuum cleaner. Genuine Dollond telescopes were considered to be amongst the best. Peter Dollond (1731-1820) was the business brain behind the company which he founded in Vine Street, Spitalfields in 1750 and in 1752 moved the business to the Strand London. The Dollonds seem to have made both types of telescopes (reflecting and refracting), possessing the technology to produce significant numbers of lenses free of chromatic aberration for refracting telescopes. A Dollond telescope sailed with Captain Cook in 1769 on his voyage to observe the Transit of Venus. Thomas Jefferson and Admiral Lord Nelson were also customers of the Dollonds. Dollond & Co merged with Aitchison & Co in 1927 to form Dollond & Aitchison, the well-known high street chain of opticians, now fully part of Boots Opticians. They no longer manufacture but are exclusively a retail operation.    John Dollond's experiments in optics and how different combinations of lenses refract light and colour gave a better understanding of the divergent properties of lenses. That went on to inform and pave the way for the improvement of our understanding of optics that is represented today. Dollond was referred to in his time as the "Father of practical optics" as a leader in his field he received many prestigious awards. The telescope in the collection is a good example of one of Dollond's early library telescopes. Its connection with one of England's 18th century pioneers in optical development makes it a significant and an important item to have within the collection.Telescope: Dollond's Telescope, Day or Night model navigational instrument. Telescope is mounted on wooden tripod stand that has folding legs. Brass telescope with leather sheath over barrel, adjustable angle fitting with brass wing nuts that join the legs to the top frame, which is then joined to the telescope pole by an adjustable screw fitting. Manufactured by Dollond, London. Inscription reads "Dollond London, Day or Night" and "DOLLOND LONDON"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, telescope, dollond, dollond london, day & night telescope, floor-standing telescope, optical instrument, john dollond, peter dollond, achromatic telescope, heliometer, light refraction, instrument maker, lens, transit of venus, astronomical telescope, concave lens, library telescope, dollond telescope, day or night, day or night telexcope, scientific instrument, navigation, navigational instrument, astronomy

Used to tighten fasteners. This wrench is large so may have been used for fasteners on farm machinery or in the SECV workshop.Used by residents and workers in the Kiewa Valley.Cast iron or steel - 1 and three sixteenth of an inch embossed on one side and 8 and a quarter inches long on the other. This wrench has a square hollow (box ring) at one end which is used ro provide grip and mechanical advantage in applying torque to turn objects - usually rotary fasteners, such as nuts and bolts - or keep them from turning.embossed measurement on the handlewrench, tool

This "homemade rake" is constructed from a branch of a tea tree. This item demonstrates that in the mid to late 1800's the isolation of the Kiewa Valley was more pronounced than during the early 1900's. The availability of gardening implements to the residences within the Kiewa Valley was scarce to non existence. with the upgrading of roads into the valley and the boost to the Valley's population (S.E.C. Kiewa Valley Hydro Electricity Scheme) transport into the valley, firstly via commercial Hawkers in their mobile caravans and later by commercial trucks. This "home made" rake is very significant because it highlights the ingenuity of local farmers and graziers in overcoming the semi isolation of the Kiewa Valley and its regions from the commercial availability of gardening implements enjoyed by gardeners in the towns and cities of the 1800's and the early 1900's. This "home made" garden rake highlights the ingenuity of the "Australian" character per se. A slice of this ingenuity can be seen by the amount of inventions, per capita, produced within Australia throughout its history.Handle is a long, stripped branch of tea tree. The head of the rake is a 2.3 cm. wide piece of wood, compressed between two 0.5 cm. pieces of metal joined with bolts, nuts and rivets. The holes drilled into the wood hold metal tines 10.5 cms. high. There should be 16 tines but 4 are missing. This type of rake is/ was used in dairiestimber, dairy, farm, rural, implement

This is a cardboard colourised certificate. It was put out by Victorian Education Department. On top centre is a crest showing two women. A shield with Southern Cross, around the words "Education Dept Victoria", are garlands of gum leaves and gum nuts. At the bottom of the certificate are printed figures of a girl and boy. The girl is knitting something. The boy is holding a saw and a piece of timber. (His knees are scratched.). The recipient's details are typed - George Edwards of White Hills 1916 - Dated 22 Sep 1942.ww2, schools, fundraising

The lectern was gifted by Mary Georgina Howard Northcote in December 1907 for the Siddeley Street mission (see Annual Report 1907: list of gifts for the new institute page 8). It was moved to the St Peter Chapel, Flinders Street, and has been in use ever since. Mary nee Reynell in Cheltenham, England, was the wife of Edward Northcote, ex master mariner and general manager of the Adelaide Steamship Company between 1899 and 1926, before his death on 4 November 1926. Edward Northcote was the cousin of Henry Stafford Northcote, Governor General of Australia (1904-1908). Lord Northcote laid the stone of the Siddeley Street Seamen's Institute on Tuesday 5 February 1907. Mary died in December 1932, in her will she made a donation of £25 to the Mission. As it was moved to the St Peter chapel when the Flinders Street Mission opened, it was added to the 1917 list of gifts.The Mission to Seafarers Victoria has been in operation for over 150 years in Victoria although experiencing many name and location changes. Support and patronage by Governors general and State governors was key to official recognition of the work of the Mission.The current site at 717 Flinders Street is the most enduring and many artefacts from previous locations have been relocated to this site. This lectern underscores the relationship between the Mission and notable Victorians.The head of the lectern is supported by three wooden cross sections each engraved with a criss-crossing leaf pattern. The legs of lectern have a similarly carved decorative panel forming an arched shape. Each corner of the panel has gum leafs and nuts carved into it. The foot of the lectern is less ornate although there are three decorated wooden panels mimicking those supporting the head.Brass plaque on lectern: FOR THE GLORY OF GOD/THIS LECTERN/WAS PRESENTED BY/MARY HOWARD NORTHCOTE/DECEMBER 1907religion, lectern, australia-wharf, mary georgina howard northcote nee reynell, edward northcote (1854-1926), adelaide steamship company, henry stafford northcote (1846-1911) g.c.m.g, mission to seafarers, seamen's mission, mission to seamen, flinders street, yarra river, siddeley street, heritage listed, gifts-1917

Program for Bendigo Apex Club's Annual Binge ' It's Behind the Apples or Behind the Nuts' Bendigo Apex Club's Annual Binge June 22 1948. Legacy needs you. Free Kindergarten Need You, printed on front. Item donated by Andrew Levy, descendant of Cohn Brothers, Hank Levy mentioned in poem 'Hank Levy caught courtin' and takin' sides'event, social, apex club annual binge, apex, bendigo, event, annual binge, levy, cohn

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers. Tram 502 entered service 4/1928. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has been stamped at one end on the underside "502" "1", indicating it was made or used on W2 502, No. 1 end. trams, tramways, conductors, bells, mmtb, w2 class, tram 502

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers. Tram 579 entered service 9/1929.Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has been stamped at one end on the underside "579 2", indicating it was made or used on W2 579, No. 2 end.trams, tramways, conductors, bells, mmtb, w2 class, tram 579

Timetable board for Camberwell Junction Batman Ave route 70, detailing times that services were scheduled to depart the Junction. Probably used until replaced by The Met style signs in the mid-1980s.Demonstrates a timetable board style used by the MMTB in the 1970s and early 1980s.Board made up to display tramway timetables for attachment to a post comprising heavy galvanised steel backing sheet with two small channels either end, spot welded to the steel back, front painted in green with the letters "M&M.T.B" in yellow paint, perspex sheet at the front, secured by 6 Allen screws with nuts on rear, containing a typed timetable sheet - for Camberwell Junction for Batman Ave timetable - undated. tramways, map, batman ave, camberwell junction, route 70, timetable

Book with dark blue cloth cover, gold printing on the front and pinkish red edges to the pages. Australasian Edition, Universal List of Extra Parts for Repairs for Ploughs, Scufflers, Land Packers, Rollers, Barrows, &c. Published in 1923. Massey-Harris Co., Limited Toronto, Canada, and Melbourne, Australia. Book has illustrations of the different plough, etc. and description of part. There are plates with drawings of parts and numbers and illustrations of bolts, cotters and nuts, etc.rural industry, agriculture - cultivation, massey-harris plows, john bovaird collection - australasian universal massey-harris plows extra parts list 1923, massey-harris co limited

This photograph shows the interior of the Valley Worsted Mill in 1923. The mill was first established at this time, and the photo shows the interior after tooling up but prior to the mill actually commencing operation. This photo is one of 31 in total and probably shows the mill maintenance shop, as a grinder, a diesel drum and a container for nuts and bolts can be seen. The donor worked at the Valley Mill for many years. This mill still exists in Swanston Street, Geelong and is now being used by Melba Industries (an Austrim-Nylex company) to produce Jumbuck Nylon wool packs.Interior of Valley Worsted Mill, c.1923.valley worsted mill

Majolica - English Popular colourful relief-moulded ware, often in naturalistic shapes covered in various types of opaque white ground to secure glowing effects with brush-painted colour glazes, clear or opaque. Products ranged from umbrella stands to dishes of fruit or nuts. Evolved at the Minton factory in 1851 under Art Director Leon Arnoux, who might use parian ware for majolica figures etc. Widely produced, with little similarity to the Italian Renaissance ornament although some designed for Mintons by the artist Alfred Stevens was inspired by such motifs.Unusual multi-coloured patterned tea pot and lid. Basic colours - green, pink and blue'Estrucan/Majolic/E24domestic items, crockery

Ski boots were carried by wooden carriers when transporting ski equipment eg. from transport to snow line or accommodation. The boots had a lip at the front and back to enable them being clipped onto ski bindings and boot carriers.These ski boot carriers indicate the type of equipment that used to be used by skiers skiing on the High Plains and Falls Creek. It is also an example of the inventiveness and skill of people who made their own equipment that either couldn't be bought or wasn't available locally. A pair of wooden ski boot carriers made from light wood. The wood is thick at the heel end with an overhang for the heel of the boot. It has a thin leather strap at the toe end and an adjustable clamp at the toe end. The adjustable part consists of a clamp on either side of the wood held by 2 nuts that screw towards each boot . This clamp can slide up and down the hollow groove in the wood. One boot fits on each side of the wood. Reused wood with old marksski boots. snow. high plains. falls creek

K.G. Luke had a foundry in Queen's Parade, Melbourne which made badges and manufactured items for the Armed Forces during the First World War. He bought 40 acres of cherry orchard in Mitcham in 1952 from a Miss Cook, then went to England and attracted finance from Singer Brass Founders. The company became Luke and Singer. The three factories on site were Luke Manufacturing - stainless steel products and hospital equipment, Luke and Singer - a non-ferrous foundry producing components for industry such as nuts and cutlery, and Concentric Engineering - machinery components. Later the manufacture of refrigeration and air conditioning was added at the rear of the complex. A small aerial photograph and 2 A4 photocopies of the K.G.Luke Group of companies in 1959. The factory site is divided into three groups with Whitehorse Road situated at the bottom of the photo and Cook Road Mitcham to the left. Notes at ND6245luke manufacturing, k.g.luke group, luke and singer, concentric engineering, wheatland, vic, manufacturing industry, foundries, engineering industries

White paper catalogue with brown printing for a sale on account of Parks Victoria, on 27th February 1997 at San Remo. For sale were marine & general service equipment, boat, crane, forklift, metal shop and woodworking machinery, pnu. & power tools, outboard motor, winches, trailers, hardwood & railway line, office furniture & equipment, nuts & bolts and hydraulic underwater tools. Announcement printed in the front of catalogue mentions that J. H. Curnow & Son Pty. Ltd. Are combining their name with the Dyett family and trading as Curnow Dyett, Real Estate Agents, Auctioneers and Qualified Valuers.business, auctioneers, curnow dyett, ian dyett collection - auction catalogue - parks victoria, leigh hart, ian dyett, curnow dyett, j h curnow & son pty ltd

The banner and frame were carried by representatives of the 38th Battalion during parades..1) Rectangular red cloth banner with gold coloured fringing sewn to the bottom edge. Red cloth loops are sewn onto each side and the top to facilitate attachment to the metal frame - see .2). Printed on both sides in gold, black and white - '38 Battalion AIF'. The '38' is printed on a replica of the 38th Battalion colour patch. .2) Rectangular frame in khaki coloured tubular metal. Each corner is clamped and secured with bolts and wing nuts to allow for the frame to be dismantled. The top LH and RH corners are topped with a cast meat Rising Sun Badge over the letters AIF.Nilbanners - military, 38th battalion, metalwork, badges, passchendaele barracks trust

To commemorate the contribution of Mr MacLennan, this tablet was commissioned and on display in the foyer of the Braille Library in Commercial Road. It consists of a wooden frame, with a copper inset of Scottish thistles (to the left and right) and gum leaves and nuts (above and below) surrounding a sepia photograph of Mr MacLennan. A blue glass plate below the photograph reads "The social, friendly, honest man/ What e'ver he be/ 'Tis he fulfils great / Nature's plan / And none but he. Burns". To the left and right of this are accompanying blue glass plates with interwoven lines. At the base of the tablet is another blue glass plate: "To perpetuate the memory of the late/ William Hector MacLennan/ Who died on Sept. 18th 1929/ He was one of the founders of this Association/ and President of the Social Committee from its inception/ 1894-1929". Brown wooden memorial tablet with inset of copper and photograph victorian association of braille writers, william hector maclennan

The Gordons were architects and were associated with many buildings still standing in Albury and Wodonga, St Patrick's Church and the de Kerilleau Homestead among them. They established Vermont Orchard on 74 acres to the south of the Wodonga settlement. Here they grew fruit and nuts for the domestic and export market. The enterprising family also set about transforming some of the land by clearing it, creating streets and making general improvements. It was the biggest subdivision in Wodonga at the time. The 234 allotments in the Wodonga Estate were put up for sale by auction in May 1890. A total of 200 people were said to have attended. Gordon, William, Charles and Vermont streets in Wodonga are named after the family. This bell was used at the Vermont orchard to signal the beginning and end of the working day, as well as lunch breaks.The Gordon Family orchard bell is made of cast iron. It includes the inscription "J. C. W../G./1858." This is thought to represent the initials of John Gordon and sons Walter Joseph and Charles Goodwin Sylvester Gordon. There is some conjecture about this due to the date "1858". John was born in London, England in 1823 and died in 1880. Walter is generally accepted to have been born in 1857 and died 1903. In one family tree Charles is recorded as being born on 28 January 1858 but his birth was registered in 1860. The mystery of the date is therefore not fully resolved.On one side of the bell "J. C. W../G./1858."gordon family wodonga, gordon and gordon architects, vermont wodonga

Sent from Germany by Elfriede & Paul Faig.Small square Swains typewriter ribbon tin with 41 items of metal tools inside: 1 square metal (typewriter ribbon) tin & lid; 9 metal bit holders (different sizes)|4 metal nuts; 1 solid metal cylinder; 1 hollow cylinder; 4 saws; 2 metal bits; 1 brass cylinder; 1 copper cylinder; 5 metal rings (various sizes); 1 metal threaded cylinder; 2 metal bits; 1 piece of wire; 3 metal spot drills; 1 watchmakers tool; 4 pieces of tin; 1 metal threaded cylinder.tatura, camp 3, faig, p, kaltenbach, g, hermann, w, horology, tools

.1 - Book - 20 pages + light grey cover, side stapled, issued by the British Engineering Standards Committee, British Standard Specification for "Keys and Keyways". Dated April 1918. Has standard Number 46-1909. Provides materials specification, testing and an index. .2 - Book - 16 pages + light grey cover, cotton stitched on side, issued by the British Engineering Standards Association, British Standard Specification for "BS Fine Bolts, Hexagon Bolts, Set Screws, Nuts, split-pins, washers and studs". Dated Feb. 1925. Has standard Number 191-1924. Provides materials specification, tables, and an index. .3 - Book - 8 pages + light grey cover, cotton stitched on the side, issued by the British Engineering Standards Association, British Standard Specification for "Identification colors for Engine Room Piping". Dated May 1929. Has standard Number 3011-1924. Provides index and colours of piping to be used and Identification. .4 - Book - 16 pages + light grey cover, cotton stitched on side, issued by the British Engineering Standards Association, British Standard Specification for "BS Whitworth Bolts, Hexagon Bolts, Set Screws, Nuts, split-pins, washers and studs". Dated Feb. 1925. Has standard Number 190-1924. Provides materials specification, tables, and an index..1 has the stamp of the "Tait Book Co. 90 William St. Melbourne" on the lower edge and in the top right corner, the ESCo Ballarat company stamp. .2 - has the stamp of the Standard Association of Australia, endorsing the document as an Australian Standard, B49-1932, and has the ESCo Ballarat company stamp with dated 17 April 1934. .3 - has the stamp of the Standard Association of Australia, endorsing the document as an Australian Standard, F1 - 1931, the label of "J. Ewins & Sons, Booksellers, Ballarat on the lower left-hand corner of the cover and the name "R. S. Coy"? in pencil on the top right-hand corner. .4 - has the stamp of the Standard Association of Australia, endorsing the document as an Australian Standard, B48-1932 and has the ESCo Ballarat company stamp with dated 17 April 1934.trams, tramways, engineers, bolts, power station, workshops

Belonged to the Melbourne Harbour Trust Commissionersarge, wooden, rectangular "Roll of Honour" board for the Melbourne Harbour Trust Commissioners. It was their honourary board for employees who went to the 1st World War. comprised of seven panels with names of people carved into them. The centre panel has "in Memorium' in brass lettering and is raised out from the three panels which flank it on either side. The main lettering across the top of the board is made from brass, and is attached to the wood. A circular brass crest is featured in the centre top of the board, which is flanked by carved gum leaves and nuts. The date "1918" is also cast in brass and attached to the lower front right hand side of the board.1918 circa."ROLL OF HONOUR/ THE MELBOURNE HARBOR TRUST COMMISSIONERS/ MHT/ IN MEMORIAM/ R. DEWAR, W. KEARNEY, A.H. TREBLE, R. CURWEN, G.R. PALMER, J. STUBBS, A. ALLISON, T. MCCARRON, W. MCLAUGHLIN, J.D. MCMILLAN, F.S. CLISSOLD, A. STEEGE, W. JORY, C.H. WOOD, H.H. BARKER, J. HEMINGWAY, R.H. CROCKETT, T.W. PARROTT, E.G. STONE, W.H. FRAME, S.H. PARROTT, V.W. PIPER, A.R MCBRIDE/ D. FINLAYSON, S.EVERETT, G.O. LAWRENCE, A. PHILLIPS, A. CAHILL, G.C. HUGHES, G.S BELL, A.D. BROAD, C.W. MILLS, A.C. COOK, A. JONES, A. COCCIARDI, A.N. ROYCE, M. THOMAS, A.WARE, J. RISBRIDGER, A. STEPHENS, G.S. MCCOLL, W.S. TAYLOR, H.A. MILLER, P.J. BURNS, D.B. MACKIE, F. HEARN/ E. SAMBELL, J. STOTT, W. POOLEY, R. JOHNSTON, A.W. FERGUSSON, W.H. SPURR, P.R. STEVENS, D.J. STUART, T. CHAPPLE, W. REED, W.J ALLINGHAM, J. PAGE, J.J. MAIR, C.A PHIPPS, J. WILSON, A.J WILLIAMS, W.L. FOSTER, W.S PENHALLURIACK, R.N. BARBER, E. DOLAN, T. MCGRATH, P. PATERSON, J.W. GRAY/ C.J.H.BARRY, F.L. WATERS, F.E. BUXTON, A.C. NUTTING, E.J BATTEN, C.E. ELLIOTT, C.T. RUFFLE, W.H. STEVENS, J. JOHNSTON, D. BATHIE, J. MCPHERSON, T.W. GIBBON, J.W. BURN, C.H. CHEEK, P.J. EVANS, J. MUCHEMORE, G.N. SADLEIR, W.D. SMITH, C HINCHCLIFFE, A. CARD, F.A. ROBERTS, C.E. TROWBRIDGE, W. ALLAN/ V.T. NICKELS, J.G MEYERS, T.G. MCKEDDIE, W.H EVANS, S. KEWLEY, F. MUIR, F.W. TREGANOWAN, M. GRANT, T.R. HAWWORTH, N. NORRISON, J. MCDONALD, J. SHERIDAN, H.R. GOLDIE, A.A. METHVEN, H.P.H VINVENT, P. RIDDELL, R.W. BARCLAY, P. NASH, A.E. WHYTE, W. DAWSON, J.F LEISTER, J. MCNEILL, H. STAFFORD/ J. PHILLIPS, W.J. PETTETT, W. PRIEST, C. OLSON, G.D. CARRE, L.C.R GAME, I.M COWLISHAW, R.R. SMITH, P. DUSTING, T.H. JONES, W. DOWIE, G.T. BEASELY, J.G BAILEY, F. JORDAN, J. FARRELL, A. DAWE, W.H. STUBBINGS, C.W. STEFFENSON, H. BLACKEBY, H. TATE, J. BASSETT, J. MCLEAN/ IN MEMORIAM, P. FOLEY, A.C. JOHNSON, S. TURNER, C.W FORD, E.F RENNICK, T.G. HOBERG, T. WEIR, W.S HICKS, J. BARRY, H. DANIEL, W. ROADKNIGHT, L.N CLARK, R. DYSON, H.G JOHANSON/ 1914/1918

Used on a farm in the late 19th or early 20th century.A pair of tubular steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts and nuts and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames