Tool used to carry plaster sheets on the ledge at the bottom.A handmade tool used locally.Metal tool with heart shaped handle and spade shaped base with right angled edge on the bottom. Weld join near bottom. Painted in silver. plaster sheet carrier, plaster tool

A colander, sieve or cullender is a kitchen utensil used to strain foods such as pasta or to rinse vegetables. The perforated nature of the bowl allows liquid to drain through while retaining the solids inside it is sometimes also called a pasta strainer or kitchen sieve. Conventionally, colanders are made of a light metal, such as aluminum or thinly rolled stainless or plated steel, colanders are also made of plastic, silicone, ceramic, and enamelware. The word colander comes from the Latin Colum meaning sieve.Early 20th century kitchen item possibly of French manufacture due to the design and shape of the bowl this design appears to have been favoured by the French around 1910 for smaller Colanders. This item gives a snapshot into domestic life around the late 19th and early 20th centuries and the types of kitchen equipment in use.Strainer or colander, metal, with concave base and wood handle, plated metal construction with welded or folded seams. Handle painted black, perforated base.Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, strainer, food strainer, seive, food preparation, kitchen ware

Early 20th Century glass syringe Glass syringe, with open circular hand crip and string resistence wound around cork stopper, with bakelite (?) cap and handle repaired with metal welding. deaf children australia, syringe, ear syringe, glass syringe

Demonstrates an aspect of the BTPS works on the provision of the access track - welding joints and photographs of volunteer workers.Black and White photograph of Richard Gilbert and Geoff Cargeeg on the access track, with a "Danger Do not look at Arc" welding warning sign in front - c1974.tramways, trams, trackwork, access track, welding

Inspired by a well-loved poem of Gerard Manley Hopkins, the abstract sculpture is reflective of the elements of Bayside's coastal environment: wind, water and waves.welded steel Public Art Commission located on Sandringham Foreshore Reserve, Beach Rd, near Sandringham Life Saving Club, Sandringham, Victoria.sculpture, windhover, clouds, wind, waves, lenton parr, public art, sandringham, foreshore, bayside art coastal trail, beach road

Drawing of the water tank for scrubber car 8 operated by the Ballarat Tramway Museum, showing the materials, welding and dimensions.Yields information about the water tank for scrubber tank fitted to scrubber tram 8Drawing - dyeline print folded into 8tramcars, work cars, scrubber tram, water tank, tram 8

In Australia, the wholesale druggists Fenton, Grimwade and Company, established in 1876, were producing small quantities of oxygen for medical and industrial purposes(11,11). In 1910, they produced a booklet promoting the therapeutic use of oxygen, suggesting it's use in pulmonary and cardiac affections, asphyxia, and morphine poisoning(9). Eventually, oxygen was to play a more significant role in medicine following two significant events. In 1895, Karl Von Linde succeeded in liquefying air, and then fractionally distilling its individual components, including oxygen. This new technique for the production of oxygen from air was revolutionary, but large demand for it did not develop in the wider community until Claude and Hess managed to compress acetylene into cylinders safely in 1897, keeping the highly explosive fuel stable by dissolving it in acetone. By 1900, the oxy-acetylene welding technique was born, and the demand for oxygen for industrial purposes accelerated worldwide. In Australia, Russell Grimwade, working for his father's company, ordered the first oxygen plant to be built in Australia in 1910. (George Kantianis, 2013)Medium sized black coloured cylinder with rounded base once containing oxygen with a large black on white diamond shaped manufacturer's label adhered to the front. Much of the label has been degraded with missing bits, and rust stains.Printed on to manufacturer's label: OFFICIALLY PREPARED FOR MED? / AUSTOX [in logo] / COMPRESSED / OXYGEN / CONTENTS / 33 [handwritten in pencil] Imperial Gallons / KEEP COOL / Australiand Oxygen and Industrial ? / Pty. Ltd. / MELBOURNEoxygen, cylinder, therapeutic, russell grimwade

Trench Art. Used shell base 25 pounder dated 1941 plus various rounds to depict a fighter plane. Belonged to John Donald McSween, no. 117346 LAC RAAF, enlisted 14.8.1942; discharged 14.5.1945Fighter plane mounted on ashtray base(2 pieces). Plane removable, made from artillery rounds, central stem welded onto ash tray base.Badge on central stem, "AUSTRALIAN MILITARY FORCES".ornaments - metal, souvenirs - military history, trench art

Length of horse tram rail, reportedly used in Ballarat. Has been oxy cut. See \dB text\Archive Document files\Reg item 4700\Horse tram rail1.doc for notes on the time of acquisition and a copy of an email from Alan Bradley concerning this rail. Also printed versions with the worksheet.trams, tramways, horse trams, rails

The book was published for the use of personnel of the army, navy, marine corps and coast guard. The book was used by Charles Bacon who studied at the University of Nevada in the late 1930s/early 1940s. Bacon worked at Bunker Hill Mines and Kellogg Idaho, before arriving in Australian in 1951. He worked for CN Myers, a company involved with paper converting. CN Myers was a family business (on Charles Bacon's maternal line).Blue soft covered book of 607 pages. Chapters include electrical Algebra, fundamentals of Electricity, Wiring, Magnetism, Armature Wiring, Generators, Motors, Controllers, Geometry and Trigonometry, Alternating Current, AC Circuits, Transformers, Polyphase Systems, Alternators, Induction Motors, Stator Winding, Multi-Speed Induction Motors, AC Controllers, electrical instruments, Electron Tubes, Welding Systems, Welding Systems, electrical Drawings. charles bacon, mining engineering, metallurgy, university of nevada, armed forces, world war 2

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Rectangular; two pieces of iron welded together. Extensive rusting. Letters ANK 299 inside trapezoidal pattern. Kuala Lumpur cut out along bottom of stencil."ANK 299 / KUALA LUMPUR"

Used by drivers to control the brakes on an air-braked tram. Designed to fit a Westinghouse self lapping W type brake valve.An essential part for the control of an air-braked tramcar.Brake handle or key consisting of cast steel handle and a welded section that fits into the brake valve. The angled section allows the handle to be removed when the brake is fully applied.tramcars, trams, brakes, westinghouse, drivers

This plough was hand wrought on a forge by Thomas Gibbs and used by him in ploughing competitions. It is a good example of forge welding. It include some 'found' items.Small horse drawn long board plough with one wheel and one shear.It is hand made on a forge and includes some 'found' objectsrural industry, agriculture

Set of 8 black and white photographs of the SEC Ballarat track welding truck, Reg. No. 119 341. Truck is a British Bedford truck, model WHG, built by GMH Melbourne between 1932 and 1934. Has a fabric roof, chassis fitted with a tray top body, side tool box, metal frame and covered with canvas, fitted out with a motor generator set, welding equipment and oxy acetylene bottles. Also fitted with a spot light - 'Auto Reel Lite". - See Related Items sheet on truck notes provided by Kevin Oates, MFESB workshops, 4/2001. (Scan of this sheet of the Kodak folder added 15-8-2017 - see pdf file.) 1705.1 - side on view of truck with covers down, except for opening at back. Photographed in Wendouree Parade with two different boat sheds in the background. 1705.2 - view with drivers side cover opened, showing equipment arrangement. 1705.3 - close up view of motor generator set and controls and one of the oxy acetylene bottles. 1705.4 - view showing equipment laid out on the roadway, welding cover, seat, grinder, cables, shovels, welding mask etc. 1705.5 - close up view of motor generator control panel and associated cables. 1705.6 - view of side of truck showing all equipment. 1705.7 - vertical format photo from rear of truck showing equipment laid out and wandering lead connected to the overhead. Also shows high voltage wires on a power pole fitted with a bracket arm. 1705.8 - view of truck from the front, with SEC symbol on side, with a covers closed. Thought to be photographed at loop in Wendouree Parade on the View Point line, near Mill St. Prints when donated to the BTM were contained within a red and yellow "Kodak" folder. Folder stored with catalogue worksheet. On rear of folder in ink is number "53569" and stamped on the front is number "984" and written in front top left hand cover, "8 prints" and in top right hand corner word "Sarah". See Notes provided by Kevin Oates of the MFESB (Metro Fire Brigade Melbourne) Thornbury workshops on the truck, manufacture and engine. A survey of Wendouree Parade on 22/4/2001 did not show the boat sheds or power lines featured in the photographed. Thought to be in vicinity of Power station because of the high voltage lines on the power poles.Stamped on rear in black ink, "984" on photos 1705.3 to 1705.8.trams, tramways, welding truck, trackwork, secv, wendouree parade

Deep trench with pipe coming up at an angle, a wooden rod inserted into pipe probably to keep in alignment until welded. Top left corner shows 3 legs and feet.Kodakorganisation, industry, gas and fuel

2 x metal/iron shaping tools. Flat rectangular metal piece has corrugated pattern underneath. This metal piece has a rectangular metal handle welded onto itblacksmith, forge, shaping tool

The box used by SEC Ballarat and Bendigo tram crews for holding their ticket outfits and making returns to the Revenue Clerks. Fitted with a padlock - see Reg. Item 3673. .Issued to a crew member with Traffic No. 62 - Roy Courtney. Each crew member was issued with a series of tins, A, B, and C which allowed for the various days and weekends to enable Revenue Clerks to accept returns and restock the tins with new tickets etc. Known to crews as "Two bottle boxes" - could fit two bottles of ale into them. The actual manufacturer is not known - could have been SEC workshops. See item 8917 for an MMTB tin.Has a strong association with tram crews and the ticket / revenue collection system. Tram crews used them to contain their tickets and to undertake their returns. Also used to "hide" bottles of ale., Has a strong association with tram crews and the ticket / revenue collection system. Tram crews used them to contain their tickets and to undertake their returns. Also used to "hide" bottles of ale.Metal box formed from four sheets of metal, spot welded together with a formed lid, hinged to box and fitted with a hasp and staple. Box painted black and lettered "62A". trams, tramways, crews, tickets, revenue journal

Each crew member was issued with a series of tins, A, B and C which allowed for the various days and weekends to enable Revenue Clerks to accept returns and restock the tins with new tickets etc.Has a strong association with tram crews and the ticket / revenue collection system. Metal box formed from four sheets of metal, spot welded together with a formed lid, hinged to box and fitted with a hasp and staple. Stamped with red lettering reading "D81". btm, ballarat tramway museum, conductors tin, fares, tickets

This hanging rack has been made out of used horse shoes. It may have been used separately or as part of a longer rack attached to a wooden backing.This item shows the skill and craftmanship of self-reliant rural families.A home-made coat hook made from two small horseshoes which have been bent and welded together to make a hook for hanging coats. It has been painted black.horse-shoes handicraft hanging-rack

According to Les Solomano this unitoriginally belonged to the Hendricks brothers of Talbot. It was mounted on the front bumper of their 6 ton truck used for general cartage.The Unit shows the wide range of Gas Producers constructed during the war years to drive with charcoal fuel. This Gas Producer unit appears to be home-made mild steel construction for a specific purpose. The assembly sits on a welded frame, the hopoper on one side, the filter drum on the other and the radiator in between.there are no specific markings visible

Two of these plates were produced to be used on trams for drivers undergoing their first day of training from the Hawthorn Tram Depot. The 6th Image is of a cutting from The Sun 5 Dec 1969 shows the purpose of the L plate in position on tram 603. Advised that by 1974, this plate was not in use,Demonstrates the MMTB advising other road users that the tram driver was under training.Metal sign, fabricated steel sheet and tube with rolled edges, with a hook welded onto the rear to fit into the tow bar hole of a tramcar. Painted yellow with a large black "L" on the front.signs, drivers, driver training, l plate, trams, tramways, tram 603

Item made by Percy Weymouth VX76127, enlisted 30.3.42 age 30/11- allotted toNo 2 Docks OP COY, emb 15.10.42 New Guinea, diesem Townsville 20.7.43, emb 12.11.43 Buna, Hops Debility 26.5.44 emb Aitape 20.6.45 for Brisbane. Disc 28.11.45 Pte in No 7 Docks OP COy.Ashtray, chrome plated, base air a 25 Pounder shell case with 3 cigarette pieces welded in, stem is a .50 Cal Round with a “Rising Sun” lapel badge wrapped around. On base, “25 PR II, CF, LOT 472 DB/C 1941 F^67memorabilia, trench art

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "5" stamped in black in top corner. Photo of the SEC Ballarat Ford welding truck, at the intersection of Macarthur St and Wendouree Parade, View Point Junction. Note tram stop signage. Three SEC workers in view, with road signage set up and truck connected to the overhead for welding work. Note bicycle leaning against truck. Welder - Weld For high resolution scan see btm2864.tif See Reg Item 7700 for another photo of the truck in the Power Station yard. "Drummond St. and View Point Junction Ballarat" / "8-4-58"tramways, trams, rails, welding, trucks

Provides information about the construction of the Bourke Street lines, new silent trams and track construction in particular Thermit welding. Shows the emphasis on the use of silent trams and the methods of achieving this.Yields information about the construction of new silent trams and the Bourke Street lines.Newspaper cutting - "Quiet trams for Bourke Street" - The Herald 1 June 1955 with an article and five photographs of new trams under construction, a model of PCC 980 and track construction, including East Preston depot.tramways, trams, bourke street, new tramways, silent trams, w7 class tram, new trams, thermit welding, tram 980, model trams

Railways collection Large Black and white photo of men working on Rolling Stock inside Railway Repair shop. No information is given, but appears to be the Bendigo Workshops welding and other tasks are taking place.photograph