This is an original propeller included with the steamer, the 1909 ferry SS Rowitta, which was installed at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. The wooden steam ferry Rowitta was built from 1909 to 1910 at Battery Point, Hobart, by Purdon & Featherstone using planks of Huon and Karri timber. It was owned and operated by the Tamar Trading Company and navigated the Tamar River from Launceston to George Town for many years. The ferry trip became a favourite activity for sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta also worked as a coastal trading vessel between Devonport and Melbourne as well as along the southern coast of Australia. The ship had served as a freighter, an army supply ship, a luxury charter ferry and a floating restaurant as well as a prawn boat at Lakes Entrance. It was also previously named the Sorrento by Port Phillip Ferries Pty Ltd of Melbourne and had at one time carried the name Tarkarri. The ferry was originally purchased by the Flagstaff Hill Museum in 1974 for converting into the historic and significant sailing ship the Speculant, but this didn’t eventuate due to the unavailability of funding. It was renovated it and renamed as the original Rowitta, to be used as an exhibit.The propeller represents a step in the evolution of ways that vessels were powered. It is also a record of the Rowitta, a large exhibit at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century and serving many different purposes over its lifetime of over 100 years. Propeller, three metal blades that meet in a central boss fitting that has a pointed cap. The blades have rounded edges and tips. This is an original propeller from the 1909-1910 steam ferry, ROWITTA, built in Hobart, Tasmania.flagstaff hill, warrnambool, maritime village, maritime museum, liverpool, ss rowitta, navigation, marine technology, steam driven, propeller, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century, passenger vessel, tamar trading company, tamar river, launceston, george town, tarkarri, speculant, port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance, sorrento

HMAS Una was a Royal Australian Navy sloop that began its life as the German motor launch Komet. The ship, and her 57 crew, was captured by an infantry detachment of the Australian Naval and Military Expeditionary Force 9 October 1914, with no loss of life. Komet was then sailed to Sydney as a prize. During the time in which the Una was in service under Australia, the sloop was used as a Patrol and General Purpose Vessel. The sloop was used to patrol the areas of New Guinea, New Britain, New Hebrides and Malayan waters. After World War I, Una was decommissioned and taken to Port Phillip Bay, renamed Akuna and used as a pilot vessel. She was finally broken up in Melbourne in 1955.After World War I, HMAS Una was decommissioned and taken to Port Phillip Bay, renamed Akuna and used as a pilot vessel. She was finally broken up in Melbourne in 1955.A sclae drawing showing side view of the double screw passenger steam boat 'Komet' which was captuered by the RAN in WWI Doppelschrauben Passagierdampfer Aussen Haut [Double Screws, Passenger Steam Boat, Outside Hight]akuna, ppps, port phillip, hmas una, ran

The wings of the pessary are controlled by two small hinges and the screw at the base of the metal stem. These wings can be opened or closed by turning the screw clockwise or anticlockwise.Zwanke's intrauterine stem pessary. Consists of two black vulcanite wings, a stem, and a screw. Stem is made up of three curved metal prongs, which fit into a small metal cup at the base. Screw is made of vulcanite with a small metal stud on the underside. intrauterine device, pessary

Green glass lemonade bottle with bakelite/wood screw topMarchant & Co.and trademark. "Registered Australia. This is the property of Marchant & Co. and cannot legally be used by others". "Taylor" inscribed on screw top.bottles, containers, beverages, non-alcoholic drinks

Item in the collection re Wing Commander Leonard Bacon OBE. Refer Cat No 7510.2 for his extensive service history. Brown tarnished bi-plane. Propellers and wheels and two wings. Struts attaching upper wing to plane is missing and most of the propeller missing. Propeller is movable as are wheels.trench art, model plane

The period when kerosene was extensively used for indoor lighting was before electrical reticulation was installed in rural areas. In remote areas this was up to the mid 1900's. The kerosene lantern however was still in use, for camping and outdoor activities, well beyond this period and was eventually replaced by LPG and battery powered lighting. The transition phase to "modern" outdoor and domestic lighting lingered on the rural areas where the electrical reticulation suffered from reliable constant supply.In the Kiewa Valley, being a rural region, had reliable electrical domestic and farm supply only after the Kiewa Hydro Electricity Scheme had been fully operational. The supply was relative to how close the homestead was to the major electricity substation. This kerosene lamp was in use during the period when it was the only reliable source of domestic night time lighting. The strength of refractive light produced by this lantern/lamp hinged upon the size of the lamp(wick and glass bowl). The small size of this lamp suggests that it was for use in a small room(children's bedroom) or as providing a light for a safe walk to the outside ablutions (toilet) area. This small kerosene lamp has an enclosed "cup" body which would have contained the kerosene fuel. The top wick holder, made from brass, has an extended enclosed spout which raises the wick approximately 20mm from the bottom of the holder. The wick holder screws into the the top of the kerosene reservoir bowl and has a wick adjustment screw (light control) at one side. The small white glass light reflector bulb nestles securely onto the wick holder and is kept snug by snap designed extending "fingers". The section between the bottom of the refractive glass "light" bowl and the top of the kerosene bowl has perforations to allow air passage to feed directly to the wick.The light refracting bulb is open at the top to allow heat and smoke from the burning wick to escape upwards.On the wick control screw "CWB BRITISH MADE"kerosene reading lamp, domestic lighting, bedside light

Bradley and Hubbard established their company in 1852 in Meriden, Connecticut when Nathaniel and William Bradley, Orson and Chitten Hatch, and Walter Hubbard, formed Bradley, Hatch & Company. This incarnation of the company only manufactured clocks. The Hatch brothers sold their interest in the company in 1854 and it was renamed, Bradley & Hubbard. Clocks remained the firm's primary product into the 1860s. In addition to their line of clocks, Bradley & Hubbard also produced a wide range of household items including match safes, call bells, andirons, urns, bookends, frames, desk accessories and vases. Technological advances in drilling and refining crude oil in the late 1850s and early 1860s paved the way for the demise of whale oil as lamp fuel. Soon after Colonel Edwin Drake struck oil in Titusville, Pennsylvania on August 27, 1859, Nathaniel Bradley saw an opportunity to capitalize on the future of this new fuel. Nathaniel decided to produce an extensive line of kerosene burning lamps this proved to be a wise business decision. Kerosene was soon to become a widely used, safe and relatively inexpensive lamp fuel. Between April 7, 1868, and December 23, 1913, the company was listed as the assignee for at least 89 lighting patents. Many of these patents were for lamp and chandelier designs and various improvements in lamp burners. In 1875 the company reorganized to form the Bradley and Hubbard Manufacturing Company. Walter Hubbard served as President and Nathaniel Bradley as Treasurer. The firm enjoyed rapid growth throughout the 1880s. By 1888, the company employed over one thousand workers and had showrooms in major cities including New York, Philadelphia, Boston and Chicago. One of the most prolific of the B&H products was the Rayo lamp it produced under contract for Standard Oil. In keeping with the changing times, Bradley & Hubbard produced a variety of electric lamps as well. Walter Hubbard passed away in 1911 and Nathaniel Bradley in 1915. The company continued through the 1930s and was purchased by the Charles Parker Company, also of Meriden, Connecticut, in 1940. The Parker Company was quite diversified in its product line, also producing an extensive line of lamps and high-end chandeliers. Parker operated its acquisition as the "Bradley & Hubbard Division." Parker ceased production of the Rayo lamp in the early 1950s. In 1973, the Bradley and Hubbard buildings were demolished, effectively ending that chapter in American lighting manufacture.Early innovation in kerosene lamp burner design by Bradley and Hubbard lamp manufacturers who at the turn of the 20th century were the biggest lamp producers in the world. The item is significant due to its historic connection with a major innovator of lamp design.Lamp Burner, metal container with turning screw for wick and mesh walls. Is made in 2 parts. Raised embossing on wick adjustment screw " PAT APPLIED FOR" on top of burner "B & H Patented.July.1.90.Nov.20.94"flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bradley & hubbard manufacturing company, kerosene lamp burner, early lighting

This screwdrivers is a woodwork toolused for driving screws into materials or for securing or loosening parts on machinery. It was probably used on a rural property in early Orbost...This is an example of a domestic tool commonly used in the first half of the 20th century before the widespread use of power tools.A large steel flat head screw driver with a rounded, wooden grooved handle.tool screwdriver woodworking

Metal propeller shaped objectflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Aerial Bomb Arming Propellerammunition, raaf

Propeller from HMAS Bayonetequipment

This shunt is a type of resistor built of copper and designed to carry a current. It was part of the Hydro generator control metering system. It reduces the large current to a small voltage.Historical: This equipment represents a major construction and ongoing operational industry dealing with the supply of hydro electricity to Victoria.Made of copper the shunt has a middle cube with 12 sheets of copper, 5mm apart formed like shelves. On either side of the cube are two shelves coming out from the middle. Both have 2 hollow circles 17.5mm in diameter 25 mm apart in the middle. At the Join of the 'shelves' and cube is a screw on each side.Screwed in metal plaque: Deriv. 1662691 / OHM 0.0000833 / AMP 1200 on the side of the cube above a shelf and on the opposite shelf: ALTO ----> (also a metal plaque screwed on). kiewa hydro electric scheme. secv. hydro generator. victorian electricity grid, power station. electricity., resistor

Agee Jars were the New Zealand brand of preserving jars. Originally they had a banded collar neck but by the 1940s or 1950s, the switch had begun to screw band lids instead and the company released the Agee Utility jars.Cylindrical, glass preserving jar with screw on metal lidOn jar: "Improved Agee Utility". On base: "F 121" and "M".food preserving jars

Clear glass tomato sauce bottle, sealed with a wide threaded screw top. Embossed sideways: “Reed Bros, Bendigo” and vertically around base “This bottle is the property of Reed Bros, Bendigo”. The base has the AGM mark for 1922 to 1929. Clear glass, sealed with a wide threaded screw top. Embossed sideways: “Reed Bros, Bendigo” and vertically around base “This bottle is the property of Reed Bros, Bendigo”. The base has the AGM mark for 1922 to 1929.bottles, agm, agm (australian glass manufacturers), sauce bottles

This white cane consists of three wooden parts that screw into each other to form the straight cane. The top section has grooves to indicate the top of the cane as well as a hole, through which the user could attach a rope or elastic cord to ensure the cane stayed in hand.3 pieces with screw connections that form a white caneorientation and mobility, equipment

119452 R G Bennetts RAAF 1942-45. Re-enlisted again in 1953.Bomber Jacket - polyester, khaki, long sleeved, black buttons, epaulettes. Mid sleeve embroidered propeller, mauve cotton. uniform, raaf

147081 William Charles Atkinson. Enlisted 9/2/1944 aged 18. Discharged 21/2/1946 with rank LEADING AIRCRAFTSMAN in 7th AIRCRAFT DEPOT.1. Jacket - cotton, khaki, black plastic buttons, long sleeved, embroidered insignia on upper sleeves. 2. Belts - cotton, khaki, black buckle.Propeller embroidered in brown thread on upper sleeves.uniform, raaf

The postcard image depicts the propeller of a Japanese midget submarine that was involved in the attack on Sydney Harbour on May 31st, 1942.On the 31st of May 1942, in the midst of World War Two, Sydney found itself under attack from three Japanese midget submarines that entered Sydney Harbour under the cover of night. The first submarine became trapped in anti-torpedo nets and the third submarine was sunk in Taylor Bay. The second submarine fired on the heavy cruiser the USS Chicago. One of the torpedoes exploded near the depot ship the HMAS Kuttabul, killing 21 sailors.Black and white rectangular postcard printed on cardReverse: 7525-4/ POST CARD/ 1/ This postcard is a/ souvenir of the Exhibition/ of Japanese Midget Sub-/ marines sunk in Sydney Har-/ bour on the night of Sunday,/ May 31st, 1942, the night/ that the first attack on/ Sydney by a foreign power/ took place and was/ frustrated./ 30th JULY 1942/ SERIAL No. 1/ Propellers and rudders of Japanese midget/ submarine/ Propellor/ with protecting/ bands./military album, beechworth, burke museum, ww2, world war two, wwii, maritime, sydney harbour, sydney, japanese, japan, submarine

Dr Alan Holmes á Court enlisted in the Australian Army in 1916 as a medical officer with the rank of Captain. In 1918, Holmes á Court was promoted to Major and attached to the 4th Australian Field Ambulance on the Western Front. As the front advanced, the Casualty Clearing Stations became further removed from the battlefield, creating an urgent need for immediate resuscitation prior to transfer back to the CCS. In June 1918, Holmes a Court and his colleagues established a forward resuscitation team. The team consisted of one doctor trained in surgery, blood transfusion and resuscitation, another doctor trained in anaesthesia, resuscitation and blood classification, and four other assisting staff. This team moved out to the wounded, rather than waiting for them to be stretchered back. They provided on-the-spot, life-saving resuscitation. The wounded were then transported back to the Casualty Clearing Station or Regimental Aid Post for further treatment. Among the assorted surgical and resuscitation equipment carried by the forward resuscitation team, were a number of Kimpton-Brown flasks. Blood was collected from patients with minor injuries using the flask. It was then administered to those in need, after establishing their blood type. Citrated blood was introduced by the Americans in 1917. This allowed blood administration to be delayed for up to two hours but there were many problems with transport, storage and infection in these early experimental days.Round, clear glass bottle with white [discoloured] paper label, with red printed, and metal screw-top lid.Handwritten on white [discoloured] paper label: Phillip HARRIS Moulded into the top of the screw-top lid in red ink: RED CROSS BLOOD TRANSFUSION SERVICEblood transfusion, red cross, world war one

Hand slide control for throttle, mixture and propeller Assy 16-1131-001

Small Repo Propeller to suit Sopwith Camel.ephemera, ww1, raaf

Avro Anson twin engine aeroplane was used by the RAAF in Australia prior & during WW2 as a trainerwooden propeller, metal leading edges, paintDRG No. LA 613c1 CHEETAH X; L.H.T.; d.7.33' p.6.96'; H.R. 1293 7; 2/42

Railway tracks are produced straight. They may appear to be easy to bend and may appear flexible, but are required to be bent for curves, at rail joins on curves and at point (turn-out) junctions. For a safe transition around curves and in the finer areas of the point, this was required to be done with a manual rail bender. Sometimes referred to as a Jim Crow, the rail bender attaches its two claws to the rail. In the middle of the two claws is a screw that is slowly tightened using a crow-bar to bend the rail. Tightening the screw too fast or too tightly may not give the structure of the rail time to redistribute and the rail may break if not done properly.Victorian Railways Permanent Way and Works track equipment Light Rail Bender narrow GaugeCast iron semi-circular tool, with hooked ends and central screw shaft.puffing billy, rail bender, jim crow

A shock of different voltages was delivered to a person using the two metal handles or two heavy soft wire combs (missing but known of) were moved across the skin. Perhaps this was an early TENS Unit. The unit came to the donor's grandfather (Roy F. Leibig - Chief Electrical Inspector of the Brunswick (Melbourne) Electric Supply) for repair and returned to his keeping once it had become obsolete (upgraded by newer machine). Donor often helped his Pa repair electrical equipment.Historical: The Resuscitator or Electric Therapy Unit was used in hospitals, possibly Mental hospitals. Provenance: The donor worked at Mt Beauty in the Kiewa Hydro Electric Scheme with the State Electric Commission of Victoria as an electrician. Black wooden smooth box with clip fastener which is screwed on - 3 screws for the base and 2 for the lid. On top of the box is a leather strap for the handle fastened by steel screwed into the box. Inside: A mask with attached strap. Tap fitting loosely into steel box. Metal cylinders and a Cardboard box. A wooden lockable case, housing electrical equipment suitable for issuing high voltage shocks.In red, middle of the side with fastener - "SPARKLETS RESUSCITATOR" Scruff marks inside the lid. A cream plastic tag is screwed on and inscribed"Manufacturers:- / SPARKLETS LIMITED / EDMONTON, LONDON, N.18 / Made in ENGLANDmedical, hospital equipment, resuscitator, tawonga district hospital, doctor

This item belonged to Dr Cyrus Jones, who performed a lot of circumcisions. There is a section on the tape made in the museum in c. June 1997 where Dr Jones talks about this. These devices were possibly made in Melbourne, perhaps by Surgical Manufacturers. The method of use for this item is as follows. Unscrew large screw to release bell. Bell sits on tip of penis inside prepuce. Pull prepuce up & through hole to trap prepuce skin. Reassemble, & tighten screw to prepuce and cut foreskin loose.A chrome metal medical device for performing circumcisions. Consists of a metal key/foot section, and a metal screw for tightening.surgery