Donated by Box Hill Historical SocietySmall metal ring with three pipe tools attached there is a hook attached to the ring to attach tools to belt. etc. Tamper used to push the tobacco down into the bowl of the pipe, this has a round disc on end of stem which is hinged. A knife like tool which is used to clean out the bowl of the pipe. A tweezer like tool possibly used to take the tobacco out of the pouchHallmarks on tamper and knifelike toolpersonal effects, smoking accessories

A metal hanging scales with ring on one end and hook for weighing with spring scale measured down frontPocket balance (MP) productdomestic items, weighing

Used by Arthur Edwards 1980s.Pocket Balance 8cm x 3cm, with a ring for hanging, and at the back a hook for a weightPocket Balance; Made in Germany.domestic items, appliances

Metal instrument for weighing - possibly in a butcher's shop. Round ring at top attached to a round dial measuring pounds(lbs) up to 200 lbs. Indicator on dial. Large hook at base of dial to attach the item to be weighed.0 - 200 Salter's Spring Balance British Made Silvester's Patent to Weigh 200 lb.instruments, weighing

Card board box containing 3 individual envelopes (originally held 6) that hold one piece transparent plastic eye shield visors mounted on leather band with felt forehead comfort strip held by 3 staples. At the end of the leather band two lengths of black elastic material straps with one having a small hook and the other having small ring and when joined secure the shield to the wearers head. The elastic bands are secured to the leather using press studs which clip into two studs in the plastic visor to make the visor fit around the wearers face. The cardboard box is made of heavy duty cardboard with opening at one end to access the envelopes. The envelopes are beige manila type and not sealed. On cardboard Box a label - EYESHIELDS,ANTI-GAS, MK11 AIR SPRAY Action to be taken within ten minutes in the following order to prevent blisters--. 1. COTTON WASTE: Swab liquid off exposed skin. 2. OINTMENT: Rub hard on exposed skin for 1 minute. 3. EYESHIELD: Change. 4. CLOTHING: If detector shows large drops, remove or cut away as necessary. If cape "worn" swab off liquid. SMALL drops :no action. 5. OINTMENT: Rub on skin now exposed. 6. DETECTORS: If possible, remove and renew. (Tippet or Armlet). 7. WEAPONS: Decontaminate. 8. OINTMENT: Re-apply to hands. A.F.A.& CO. 1941

Belt issued to Japanese Naval Officers up until the end of WW2Black leather belt with a two piece brass buckle. The centre of the buckle has an embossed anchor and lotus flower and the two parts of the buckle appear to have been gilded. It comes with a black leather sword hanger which has brass clips at each end. One end is missing the brass securing rivet whilst the rivet at the other end has a hook attached to it. Attached to this hook is a brass S shaped snake with a brass ring around the body. The inside of the belt has four eyelets and a hook on each end to allow for adjustment. It's missing one sword hanger, a belt loop on the LH side and two loops on the inside that the hangers attach to.world war 2, japanese navy

Small hanging scales at the top of which there is a metallic ring to fasten the object. This is attached to the main body which on one side has measurements inscribed into the metal surface. Inside the body is a spring loaded mechanism which moves along the scales when weight is added to a hook at the bottom of the shaft. [Ed. The maker's initials have not to date been identified.]"Pocket Balance / MR Product / Made in Australia"pocket balance, hanging scales, weighing instrument

A single iron bar set into the fireplace near the top. At the centre of the circular bar is an attachment with a hook. From this attachment hangs a ring, through which two shaped bars overlap to forma cross. Each of these smaller, curved bars has an attachment at the end (two with flat, round rings, one with a V-shaped piece with upturned ends) for securing smoking items,No visible markingsfood technology, food processing, smokehouse, curing, fire, meat, hanging, iron

Silver round pendant depicting a bearded male with peaked hat and sculpture, with attached stem and barrel ring. The pendant is held by a cable chain and decorative S hook with curlycues.Intersecting MS mark; sticker with 37; two pin holes at 1 and 7.matcham skipper, pendant, necklace, silver, jewellery

This photograph depicts a Royal District Nursing Service (RDNS) Sister (Sr.) visiting Mrs. Hodginson and babe in their home. Sr. Wan is weighing baby Tamara as part of the Post-Natal care she is giving. A nurse who is doing her Hospital training is visiting with the Sister and observing. RDNS had a Domiciliary Infant and Maternal Care, (DIMC) service operating from most Centres which visited early discharged, often 24 hours after birth, maternity cases from hospitals to give Post-natal care to the mother and babe. Sr. Wan is wearing her RDNS summer uniform of a short sleeve white blouse under a royal blue V neck tunic style frock and a dark blue cardigan. In August 1893 Melbourne District Nursing Society (MDNS), commenced a Midwifery Service with Nurse Fowler, who was trained in a hospital in General nursing and Midwifery nursing, being the first Midwife employed. Mothers were assessed for suitability of a home birth or if they required delivery at the Women’s Hospital. The Midwife worked in conjunction with the Doctors at the Women’s Hospital and if a complication arose before or after birth the patient was transferred to their care. Following birth, the Midwife gave Post-Natal care to both the mother and babe commencing with visits twice a day. In 1898 the service ceased due to lack of funds but recommenced in 1906, and in the August 1925 Annual Report the number of MDNS home births was recorded at 478. MDNS built the After-Care Home and a pioneering Anti-Natal Clinic was opened in 1930. The last Ante-Natal clinic was held there in December 1951 and the MDNS Midwifery service ceased in February 1952. In 1964 MDNS commenced a Post-Natal service with General and Midwifery trained MDNS Sisters working from a room on the ground floor at the Footscray Hospital Nurses quarters, and visiting early discharged Footscray Hospital maternity cases at home. Later, as Royal District Nursing Service (RDNS), this service was extended and renamed as Domiciliary Infant and Maternal Care, (DIMC) service operating from most Centres and visiting early discharged, often 24 hours after birth, maternity cases from hospitals to give Post-natal care to the mother and babe. Many of the RDNS Sisters who worked in DIMC also had their Infant Welfare Certificate, though Midwifery trained nurses also visited. On the right of the black and white photograph is Royal District Nursing Service (RDNS) DIMC Sister J. Wan, who has short dark curly hair and is wearing a white gown over her uniform, with the white collar and sleeves of her dark cardigan seen. She is laughing as she holds the top ring of hand held baby scales in her right hand; the bottom of the scale has a metal hook which has a sling attached to it with four cotton 'ropes'. Baby Tamara is supported in the sling which is just resting on a sheep skin and bunny rug covered metal framed change table. Sr. Wan has her left hand on the sling. To the left of the photograph is Tamara's smiling mother, Mrs. Lynda Hodginson, and in the centre of the photograph is observer Nurse Sheehan. Mrs. Hodginson is wearing a striped dress with a V neck, and has dark shoulder length hair. Nurse Sheehan has short dark hair and is wearing a white uniform and dark cardigan. A nursing watch is attached to the right hand side of her uniform. Part of a landscape picture can be seen on the wall behind her. A small white fluffy rabbit sits on the left hand side of the change table. Baby Tamara has sparse dark hair and is sucking on a dummy.Photographer's stampmdns, melbourne district nursing society, melbourne district nursing service, royal district nursing service, rdns, mdns midwifery, rdns domiciliary postnatal service, dimc, tamara hodginson, nurse sheehan, sister j. wan, mrs lynda hodginson

Mid-length shift dress in light grey-blue. Dress consists of two breast pockets, each with rounded flap closure held in place by two press studs. Dress is fastened down centre with three silver buttons held in place with a metal ring (only two buttons remain). From waist line down, dress is fastened by a hidden zipper and hook and eye. Waist line is pleated and carries two loops on the back, through which a fabric belt (0030.2) is threaded. Two fabric loops on each shoulder may have been used to hold epaulettes or similar. Dress sleeves are rolled up by 40 mm. Collar is notched. Interior label on left side at waist height reads "IYD CLO CO/VIC./8410-66-000-000/SIZE 18/ARMY NO........../NAME............"

Used in the late 19th and early 20th century.A vintage No 2 Class II Salters Improved Spring Balance weigh scale with a weight guage of 0 - 40 lbs. It is made of metal with four rivets holding the front measurement panel covering the spring with a ring at the top and a hook at the bottom to hold the item being weighed. It was manufactured in England by Salters and used in the late 19th and early 20th century.'No 2 Class II Salters Improved Spring Balance weight guage 0 - 40 lbs. Manufactured in England by Salters'''spring balances, scales, balances, weighing instruments

Used on a farm in the late 19th or early 20th century.A pair of brass horse hames with a missing chain link at the top. Each has a hook attached with a metal ring at the end. It has four rings. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

Used on a farm in the late 19th or early 20th century.A pair of tubular steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts and nuts and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames

Used on a farm in the late 19th or early 20th century.A pair of shaped steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts, nuts and rivets and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.Indicipherable inscriptionhorses, horse accessories, harness, animal accessories, farm equipment, hames

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsEach of the five anchors have an iron ring (2 large, 1 medium, 2 small) to which are attached 5 iron hooks. Medium has 4 hooks.Each has an iron ring 2 large, 2 small to which is attached iron hooks.

These hames are part of the harness used by the family of Michael Conway who established a dairy farm of 35 acres in Wodonga in 1940. He and his wife Catherine nee Carroll settled there and raised 5 children. Before coming to Wodonga Michael carried on a bakery business at Urana. The hames were part of the harness attached to the horse which pulled his bakery cart. In Wodonga Michael Conway built a 2 bail dairy and milked up to 20 cows, separated the cream from the milk by hand and sold it to the local butter factory of Holdensen and Nielsen. In later years only whole milk was sold. The farm was on the outskirts of East Wodonga. Michael Conway died on 6th January 1945. The farm was later sold for residential and industrial development and includes Conway Court.This item has a clear connection to the family of Michael Conway of Wodonga, Victoria2 metal sections shaped to fit around the exterior of a horse collar. They are joined at the lower end by a chain and upper end by a leather strap. Approximately halfway up each section a hinged hook is located to which chains are hooked and attached to the cart. Towards the upper end is attached a ring through which reins pass before being connected to the bit.michael conway wodonga, horse harnesses, dairy industry wodonga

The Villa Alba Museum is cultural institution committed to the collection, study and display of 19th century interior decorative finishes, and the components of 19th and 20th century interior decoration. These include artefacts (wallpapers, textiles, carpet samples), furnishings, printed materials (catalogues, books, periodicals), and pictures (photographs).The tiebacks complete with tassels are historically significant for being associated ensuite with DAD-035-0001, the suite of curtains. The tassels have aesthetic significance as beautiful and intricate pieces of late 19thC interior decoration.6 parts of a total of 3 pairs of curtain tiebacks. Each pair comprises a length of plain gold silk cable cord plus a second, equal length with a magnificent tassel in the middle; the two pieces would loop around the lower-middle length of each curtain, pulling it open in a graceful drape. One pair is slightly shorter than the other two. The tie backs are made of floss (soft, shiny) silk cord, composed of two thick strands twisted together into a cable cord. Three lengths have an elaborate tassel attached to the middle of each cord, to weight the tieback in an elegant loop, with the loose ends attached to hooks or pins on the window frame. Each tassel is formed on a turned wooden core, wrapped with floss silk thread; further decorated with knotted netting, applied braid, and 16 glass beads. The big end of the mould forms a large, flattened shape, from which hangs a ring of long bullion fringe. Today this looks tarnished-silver (nearly black), colour, but as shown by the card of detached lengths of bullion fringe (DAD-035-0005), the untarnished colour would have been bright gold. Part of a group of 7 curtains with associated furnishings which includes a curtain with original fittings, fringe and braid unpicked from other curtains, and these 6 curtain tie backs. The six curtain tie backs are identical, though one pair is shorter. These curtain decorations are truly luxurious; the original suite of curtains would have been very expensive, an eloquent item of conspicuous consumption of luxury goods.Attached handwritten note : "VA Th. 7/6/2012 Ric Freeman 0419875707 (Nat Trust member) & Julie Freeman 0419875706 / re soft furnishings, tassels, trimmings, braid set / Jessie, Terry (and Chris St) to view, collect". The phone numbers were tried in October 2024, and though picked up, the contacts did not want to talk about the curtain donation.interior decoration - history, curtain accessories, tassels

The "S" hook buckles were grouped together under the sea as part of the cargo of the vessel Schomberg. "S" hook buckles are used for fastening two ends of fabric together such as harness belts, trouser belts and similar items. The buckles were recovered in October 1980 by the Flagstaff Hill Sub-Aqua Group, Peter Ronald, Barry Lowther and Jeff Bell. ABOUT THE SCHOMBERG (October 6 to December 27, 1855)- When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Baine’s Black Ball Line had commissioned her for their fleet of passenger liners. The Aberdeen builders designed her to sail faster than the clippers designed the three-masted wooden clipper ship to be fast. The timber used for the diagonal planking was British oak with layers of Scottish larch. This luxury emigrant vessel was designed for superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first-class passengers. The master for Schomberg’s maiden voyage was Captain ‘Bully’ Forbes. He drunkenly predicted at her launch that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons of cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The poor winds slowed Schomberg’s sail across the equator. She was 78 days out of Liverpool when she ran aground on a sand spit near Peterborough, Victoria, on 27 December; the sand spit and currents were not marked on Forbes’s map. The ship’s Chief Officer spotted the coastal steamer SS Queen at dawn and sent a signal. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers safely disembarked. In 1975, 120 years after the Schomberg was wrecked, divers from Flagstaff Hill found an ornate communion set at the wreck site along with many other artefacts. In 1978 a diamond ring was discovered under the concretion in the lid of the communion set, which is currently on display. Former Director of Flagstaff Hill, Peter Ronald, had salvaged most of the artefacts from the wreck. This group of "S" hook buckles and conglomeration of buckles is significant as an example of an item in common use in the mid-19th century and the items carried on ship as cargo. The Schomberg collection as a whole is of historical and archaeological significance at a State level. Flagstaff Hill’s collection of artefacts from the Schomberg is also significant for its association with the Victorian Heritage Registered shipwreck (VHR S 612). The collection is of prime significance because of the relationship between the objects salvaged, as together they help us to interpret the story of the Schomberg. The collection as a whole is historically significant for representing aspects of Victoria's maritime history and its potential to interpret social and historical themes. "S" hook buckles; oval silver alloy buckles contained within a conglomeration of materials from the sea. The group was recovered from the wreck of the Schomberg.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, schomberg, horse harness fitting, harness hardware, "s" hook buckle, "s" hook buckles, conglomeration of buckles, belt buckle, fastener, quick release fastener, flagstaff hill sub-aqua group, peter ronald, barry lowther, jeff bell

The whippletree consists of a loose horizontal bar between the draught animal and its load. The centre of the bar is connected to the load, and the traces, chains or straps on each side of the harness, attached to its ends. Whippletrees are used when pulling a dragged load such as a plough, harrow, or log. The whipple tree was attached to a scoop, which was used for building the 'Puffing Billy' railway and also for scooping out Emerald Lake.Wooden bar with metal hook at each end and a metal ring attached to the centre.

Used in orchards by Harry Shaw (Orchardist in Springvale Rd, Glen Waverley near cnr Highbury Road) Orchard was sold in 1950. Later used on poultry farm in Forest Hills.Body of scales: brass plate inscribed - Salter Pocket Balance, made in England. No.3. To weigh 50LB. Slide measure 0 to 50. Pattern at top: twisted rope with arrow through middle. Reverse side: green painted metal. Hanging metal ring at top end and metal hook at lower end. Salter Pocket Balance, Made in England. No.3. To weigh 50LB.

There were at least three 1880s vessels named Lady Loch, all built in Victoria; a river launch (ca 1884 to ca 1916, originally named Lady of the Lake), a steamer ferry (1884 to 1920s), and a government lighthouse tender steamer HMV Lady Loch (1886 to 1962). The spring balance scale was part of the equipment on the HMV Lady Loch. The scale was made by the renowned company Salter Weighing Machines in the United Kingdom, to Silvester's patent design. Salter Weighing Machines, Britain, began making spring scales in the 1820s. In 1908 Salter opened up an Australian branch named Salter Scales Pty. Ltd. The scale is marked HMV SS Lady Loch. It would be suspended by its top ring, a basket or other container is hung from the hook, and the items inside the basket are then pulled downwards on the hook, which stretches the springs inside the works. The pulling action moves a rack and gears a calculated distance and the gears turn the pointer on the dial to indicate the weight of the goods. This scale measures up to 200 pounds capacity. The HMV SS Lady Loch was an iron steamship built in Footscray, Melbourne, by Campbell, Sloss and McCain in 1886 for the colonial Victorian government’s Department of Trade and Customs. It was armed with a 6-inch gun and two 1-inch Nordenfelt guns. The Sydney Morning Herald of 27th January 1888 describes the vessel in detail. It even comments on the interior of the Saloon “The wood work … is on a very elaborate scale and is exceedingly neat …”. The HMV Lady Loch performed Customs duties and serviced the lighthouses along the coast. The scale could have measured goods for the Customs Tax, or for measuring out supplies for the lighthouse keepers. The vessel was named after Lady Elizabeth Loch, wife of Sir Henry Loch, Governor of Victoria from 1884 to 1889. In 1932 Lady Loch was converted to a hulk and used in Brisbane, and finally scuttled in 1962 at Moreton Bay, Queensland.The scale has importance due to its connection to the 1886 HMV Lady Loch, a vessel of great significance to Melbourne’s shipbuilding industry. It was the largest auxiliary vessel in the Victorian Colonial Government’s fleet and the first prominent vessel launched by Melbourne’s shipbuilding industry. The scale is also important for its connection with the colonial navy's Custom's work, as the scale was available to weigh goods that could attract taxes and deal out goods for distribution to lighthouse keepers. The HMV Lady Loch was also important part of Victoria's maritime history for its communication and support of the lighthouse keeper's along the coast of Victoria.Scale; Salter's spring balance mechanical hanging scale, brass and iron. Equally spaced marks around the circular dial have values from 0 to 200 in increments of 10, each increment is also divided into 10. An iron ring is attached to a fitted loop on the top of the scale, and an iron hook is attached to the fitted loop onthe bottom of the scale. A moving pointer attached to the centre of the dial has a calibration screw joined to its base. Four screws fix the brass face to the works at the back. There are stamped and embossed inscriptions. Made by Salter in Britain, to Silvester's Patent design. The scale was once equipment carried abourd the steamship HMV SS Lady Loch. Stamped: "SALTER'S / SPRING BALANCE" "SILVESTOR'S / PATENT" Embossed in script: "HMV SS / Lady Loch"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, scale, salter, spring balance, silvester's patent, lady loch, steamship, hmv, colonial navy, victoria, lady elizabeth loch, custom's vessel, lighthouse tender, 1886, government vessel, victorian government, measuring instrument, weight, weighing instrument, mechanical scale, hanging scale, hmv lady loch, weights and measures, silvestor's patent, george salter & co.